I just went back to dcd 2.3.2 and 3.27 radio to get back higher data speeds and working set up in my car (seidio car kit that doesn't work right between new radio/rom and bluetooth/external audio). Anyway, all looks fine but when I type any of the programming codes in the dialer(and I have my unlock code), nothing happens. I get no edit screen or anything. Seems like this could be a dialer issue. Anyone seen this? I think I have the stock dialer and when I built my rom I don't think I included the newer dialers at all. maybe this is the issue? I can run epst from the windows directory I guess but not sure I have changed what I need there. the usual reprovisioning with ##code# was so simple with just the two entries of my phone number. Any help is appreciated.
Dailer
Did you install a different dialer after loading the rom. I've done that (htc dialer, big button dialer) and then codes wouldn't work until after I uninstalled them . . . for what is woth!
I had a similar issue, but on verizon. When I went to cook the ROM there where 2 dialer options: 1 for the vouge (default) and 1 for the titan. I'm not sure which I selected, but it had the touch-like dialer. Anyway, when it didn't work I flashed to DCD 3.0.1 (no kitchen) and it worked.
I rebuilt the rom with the default selections for the dialer and it worked again.
Related
I've a XDA PPC 2002 phone (from O2 Netherlends). My provider
(O2) publishes Radio and ROM Stack upgrades on almost 2-
months basis.
I've upgraded my device several times with the newest
updates. But, since last upgrades Windows Media Player
doesnt work anymore. I did soft-reset, reinstalled Media player and skins but it doesnt work. It keeps asking for a skin file and then disappears.
If I browse the internet, I can see that this problem must be ocurred to more people.
At the moment my XDA's Radio Version is 4.21.00 and ROM
Version 3.17.03 ENG.
Anyone any tip??
I have rom 3.17.03 eng.
radio 4.21.000.
protocol 32s54,
no problems here with media player 8.5 build 12177
Dead Media Player
Solution:
Use a registry editor, goto \HKLM\SOFTWARE\Microsoft\Shell\Keys. This is where you have hardware button mapping. You should only have 2 keys there (Mine is named 40C1 and 40C2).
If you have the window media issue, you should find another key there, which was put by some other softwares installation, for e.g. Fonix voice central. You need to delete it.
if you dont have a registry editor, download this free one from phm software.
http://www.phm.lu/Products/PocketPC/RegEdit/download.asp
good luck
ntabikha ,
I looked into the registry, but there are only 2 keys: 40C1 and 40C2.
Has it to do with TomTom???
Kimmie, I am also running Tomtom, so I dont think that is the problem either.
no... i fix my player all the time, because i always try softwares that change those settings. hmmm.
maybe it only works on the original version, not the update you installed.
try removing the updated version, all it does is give u skins. if you dont c are for those, remove it. that will default you back to the original.
my company replaced my xda 5 times, because THEY cant fix it. hahaha
good luck
i did a hard-reset and MediaPlayer worked! But, when I did a restore (of my backup), MediaPlayer came up with the same problem. :-(
Are you restoring a backup from a previous ROM update?
If so, then that is probably the issue...with any ROM update, you need to start from square one and not restore a backup from a previous ROM as it may revert any new improvements to the registry, and what not, of the latest ROM.
You are right. It is better to reinstall all the applications.
But if you have a lot of software, it is very hard to do it all over again!
Hi,
i have a 32mb xda and after upgrading to wm2003 i lose the checkboxes in dialogs, if i soft reset then they come back for a while and tapping on the text next to the box enables/disables the option but i get no boxes!
most strange, also i had to turn off the ir recieve but when turned off i still got the error for com 1 with navigator, i had to uncheck it then soft reset to apply that change.
i cooked the rom from jeffs kitchen a while ago and was going to redo it but it is unavailable and Yorchs only has the 4.0.05 rom.
Any ideas on the missing dialog checkboxes.
Regards
Smallboy.
Hi ! I had the same problem (even with no other app installed ! Just wm2003 and nothing else) , and I never solved it ... till the 4.01.00 went out. I tried this one and had no problem. All attempts I made with earlier versions were unsuccessfull ! Unfortunately, no rom kitchen use this version yet ! So I have a 'blank' rom version from T-Mobile found somewhere on a post on xda-developers.
Hope this help !
cheers for the reply,
as i unbderstand it the 4.1 rom only support gsm 900/1900 which is no good for me as a uk/orange customer.
regards
I have the same problem.
Im using an xda 2 on o2 with the following software
tom-tom navigator 2
gps 2.08
towa's patch
resco explorer
pocketinformant
spb pocketplus
claunch
clearnotify
Anyone else see a pattern?
Surur
Ditto for me. They're still "there", if you click your stylus over where they should be, you'll get them to work.
A reset clears the problem.
Looks like there's a leak that is using up the GDI heap. You can get the same type of error on desktop Windows.
the error is caused by navigator, i installed v2.24 on mine and also when i installed it on my mates xdaII he now has the same problem with checkboxes and radio buttons missing, they come back after a soft reset but go after running navigator..
Smallboy
smallboy. You can use 4.01.00 on Orange as long as you only update the CE Rom and not the radio stack. Just make sure you don't go onto the Band select page on the phone settings.
Hi Swifty,
Can you give me a dl site for 4.1.00 rom.
cheers m8
ftp://tmobile:[email protected]
You need to just extract the CE rom using something like winzip, then use XDA Tools to put it onto an SD card and flash to your phone.
HTH
Neil
cheers Swifty, i have this now, all i need is a way of making the nb1 file into an .exe
UPDATE
I have now reflashed to 4.01.00 (t-mobile) and then installed navigator and voice but not gps, upgraded nav to 2.24 then installed gps 2.09
No missing checkboxes now but stil get the initial strtup problem of no map, which is cured by going to navigator mode.
I am using the dialer included in DCD 3.2.6, but cannot access the ## codes in the dialer. Is there a dialer that works best with USCC?
If you install the DCD USCC Carrier cab, the # codes should work. I use them all the time.
i.e. ##778 opens PRL, etc.
BTC
Thanks for your reply.
I have installed the carrier cab, but I figured I would redownload/reinstall to ensure.. it wanted to uninstall the previous install of the same version number, to which I said yes. It couldn't uninstall it, but offered to install anyways. Which took. But still not taking the ##778 type codes. I there a way I can take the HTC Titan Phonecanvas (dialer) out of the kitchen into a cab file for a reinstall of that? If this would be relevant.
Have you installed a different dialer since flashing the phone? It's possible the new dialer you installed may have overwritten the file needed for the ## codes.
Even if you uninstalled that dialer, it may not have restored the file.
You can try backing up your phone, doing a hard reset and reload the carrier cab and see if they work then.
Mine have always worked when running a DCD rom, no matter which dialer I flashed with.
BTC
Ok, did a SPB backup, hard reset, and did the carrier cab again, but still no go.. did a friends phone from scratch, and his works fine..
I am thinking I may have had the vogue dialer in my .nbh? I rebuilt the .nbh with the titan dialer for friend.
Can I redo my kitchen .nbh and still have my SPB restore be ok? Or can I just get a .cab for the titan dialer?
Not sure, I know there are certain versions of SPB designed to do that, but I'm not sure. The main issue is it might restore registry entries that don't need to be and could cause some issues. Can't hurt to try, however worse case you would have to reinstall app yours apps by hand if it doesn't work.
I'm sure there is a cab for the titan dialer, however the Vogue dialer has always worked for me with the codes as well.
BTC
MetalHd said:
Ok, did a SPB backup, hard reset, and did the carrier cab again, but still no go.. did a friends phone from scratch, and his works fine..
I am thinking I may have had the vogue dialer in my .nbh? I rebuilt the .nbh with the titan dialer for friend.
Can I redo my kitchen .nbh and still have my SPB restore be ok? Or can I just get a .cab for the titan dialer?
Click to expand...
Click to collapse
SPB Backup has a "ROM Upgrade" mode that is supposed to be for when you change your ROM but want to keep all your programs and whatnot without having to reinstall them all. I've used it once and didn't notice any problems but I didn't keep using my phone that way for very long (only a few days at the most, I don't remember completely to be honest). Most people on here recommend against doing that. I've never had a problem with the ## codes on whatever dialer the default for DCD's ROMs is unless I was trying to do Sprint specific codes and I assumed they didn't work because I'm on Telus.
Hello,
I have seen a lot of threads talking about sms reliability, but nothing about this, perhaps someone will have a clue.
I noticed I didnt received any sms since one days or more, and someone told me he sent me a sms, then I started to search on google etc. In fact, it seems that when someone send me a sms, the phone seems to wake up (backlight), but nothing happens (no sms notification, no sound, and no sms at all).
Anyone has got this problem ? Something to do with some HTC patch ? If yes, how can I know if my reseller included this patch or not in the stock phone ?
My config (stock):
RADIO 2.07.51.22_2
ROM 1.72.73.3
Protocol 15.32.50.07U
HTC Manila Core 2.5.20121433.0
System 5.2.21869 (21869.5.0.82)
NB: Apparently, I checked and I am able to send SMS without trouble. It appears also that after a restart, I can receive some sms (for how long ?), but I never get the missing ones, and impossible to know when the problem occurs...
*bump*
problem reproduced, no clue about how to correct this
if anyone has an idea, please let me know (or an idea to debug this)
perhaps collateral effect of a registry change, or related to CHT ?
I had this problem once ...I flashed the radio in my signature and installed the messaging client from HERE...I'm not sure which one solved the sms problem but right now my phone works brilliantly...Yet to find a convincing enough reason to flash a custom ROM except to get a new look interface.
Before you attempt to flash the radio make sure you read the thread about flashing radio/ROM VERY CAREFULLY.
The messaging client also has specific instructions to install which are detailed in the thread.
Were you able to solve or figure out what the problem was?
Hi guys,
few days ago I've decided to move forward with Fusion Update 7 ROM to Fusion Update 8. Procedure was about normal beside the fact I had also purged SD card. Upgrade went well, but:
I cannot get mobile connection
No SMS can be sent
No matter which ROM/RADIO I had flashed after my previous move everything beside those two is working. So I can get WIFI connection or receive SMS, I can also call and receive calls.
My configuration:
- Hardware: HTC HERO GSM (white)
- Recovery: AmonRa 1.7
- ROM: FROYO_2.2_elelinux_v2.2 (at the moment)
- RADIO: 63.18.55.06OU_6.35.15.01 (at the moment)
Additional info:
- SMSC is set correctly (checked using *#*#4636#*#*)
- APN list is correct
- rollback to vanilla 1.5 ROM from RUU not helped
- other SIM cards from other carriers work the same way
I trying to get some debug information using adb, but only thing I can find is that ppp connection is missing in netcfg.
Do anyone know how to initiate Mobile Connection through adb shell ? or anyone get similar problem before?
Thank in advance,
Problem solved. During messing with ROMS my SIM card must been somehow damaged.
After more tries with other SIM cards my phone started to work finally.
You are missing the correct apn settings for your mobile data and also missing or have the wrong SMS service number, have a search on the forums here, or Google and you should find them. Always worth backing these up or writing them down, as not all rom's have necessarily got all providers son's included.
Sent from my HTC Hero using XDA App
Thank you for fast reply.
I checked those before:
SMSC:
- refreshed with *#*#4636#*#* and those looks correctly for my carrier
APNs:
- there where missing fields in APN config which I've updated according to carrier configuration
Still nothing had changed.
I assume that it must be some kind of config that do not change between ROMS.
(I will update first message with those info.)
Did you checked with an other SIM/carrier?
Yes I did.
Effects where the same.
I've also rolled back to vanilla 1.5 ROM from RUU. Nothing changed.
It must be some kind of external configuration that is not changed via ROM replacement. Can this be true?
Thread moved to Q&A.