I am using the dialer included in DCD 3.2.6, but cannot access the ## codes in the dialer. Is there a dialer that works best with USCC?
If you install the DCD USCC Carrier cab, the # codes should work. I use them all the time.
i.e. ##778 opens PRL, etc.
BTC
Thanks for your reply.
I have installed the carrier cab, but I figured I would redownload/reinstall to ensure.. it wanted to uninstall the previous install of the same version number, to which I said yes. It couldn't uninstall it, but offered to install anyways. Which took. But still not taking the ##778 type codes. I there a way I can take the HTC Titan Phonecanvas (dialer) out of the kitchen into a cab file for a reinstall of that? If this would be relevant.
Have you installed a different dialer since flashing the phone? It's possible the new dialer you installed may have overwritten the file needed for the ## codes.
Even if you uninstalled that dialer, it may not have restored the file.
You can try backing up your phone, doing a hard reset and reload the carrier cab and see if they work then.
Mine have always worked when running a DCD rom, no matter which dialer I flashed with.
BTC
Ok, did a SPB backup, hard reset, and did the carrier cab again, but still no go.. did a friends phone from scratch, and his works fine..
I am thinking I may have had the vogue dialer in my .nbh? I rebuilt the .nbh with the titan dialer for friend.
Can I redo my kitchen .nbh and still have my SPB restore be ok? Or can I just get a .cab for the titan dialer?
Not sure, I know there are certain versions of SPB designed to do that, but I'm not sure. The main issue is it might restore registry entries that don't need to be and could cause some issues. Can't hurt to try, however worse case you would have to reinstall app yours apps by hand if it doesn't work.
I'm sure there is a cab for the titan dialer, however the Vogue dialer has always worked for me with the codes as well.
BTC
MetalHd said:
Ok, did a SPB backup, hard reset, and did the carrier cab again, but still no go.. did a friends phone from scratch, and his works fine..
I am thinking I may have had the vogue dialer in my .nbh? I rebuilt the .nbh with the titan dialer for friend.
Can I redo my kitchen .nbh and still have my SPB restore be ok? Or can I just get a .cab for the titan dialer?
Click to expand...
Click to collapse
SPB Backup has a "ROM Upgrade" mode that is supposed to be for when you change your ROM but want to keep all your programs and whatnot without having to reinstall them all. I've used it once and didn't notice any problems but I didn't keep using my phone that way for very long (only a few days at the most, I don't remember completely to be honest). Most people on here recommend against doing that. I've never had a problem with the ## codes on whatever dialer the default for DCD's ROMs is unless I was trying to do Sprint specific codes and I assumed they didn't work because I'm on Telus.
Related
Hi,
i have a 32mb xda and after upgrading to wm2003 i lose the checkboxes in dialogs, if i soft reset then they come back for a while and tapping on the text next to the box enables/disables the option but i get no boxes!
most strange, also i had to turn off the ir recieve but when turned off i still got the error for com 1 with navigator, i had to uncheck it then soft reset to apply that change.
i cooked the rom from jeffs kitchen a while ago and was going to redo it but it is unavailable and Yorchs only has the 4.0.05 rom.
Any ideas on the missing dialog checkboxes.
Regards
Smallboy.
Hi ! I had the same problem (even with no other app installed ! Just wm2003 and nothing else) , and I never solved it ... till the 4.01.00 went out. I tried this one and had no problem. All attempts I made with earlier versions were unsuccessfull ! Unfortunately, no rom kitchen use this version yet ! So I have a 'blank' rom version from T-Mobile found somewhere on a post on xda-developers.
Hope this help !
cheers for the reply,
as i unbderstand it the 4.1 rom only support gsm 900/1900 which is no good for me as a uk/orange customer.
regards
I have the same problem.
Im using an xda 2 on o2 with the following software
tom-tom navigator 2
gps 2.08
towa's patch
resco explorer
pocketinformant
spb pocketplus
claunch
clearnotify
Anyone else see a pattern?
Surur
Ditto for me. They're still "there", if you click your stylus over where they should be, you'll get them to work.
A reset clears the problem.
Looks like there's a leak that is using up the GDI heap. You can get the same type of error on desktop Windows.
the error is caused by navigator, i installed v2.24 on mine and also when i installed it on my mates xdaII he now has the same problem with checkboxes and radio buttons missing, they come back after a soft reset but go after running navigator..
Smallboy
smallboy. You can use 4.01.00 on Orange as long as you only update the CE Rom and not the radio stack. Just make sure you don't go onto the Band select page on the phone settings.
Hi Swifty,
Can you give me a dl site for 4.1.00 rom.
cheers m8
ftp://tmobile:[email protected]
You need to just extract the CE rom using something like winzip, then use XDA Tools to put it onto an SD card and flash to your phone.
HTH
Neil
cheers Swifty, i have this now, all i need is a way of making the nb1 file into an .exe
UPDATE
I have now reflashed to 4.01.00 (t-mobile) and then installed navigator and voice but not gps, upgraded nav to 2.24 then installed gps 2.09
No missing checkboxes now but stil get the initial strtup problem of no map, which is cured by going to navigator mode.
Cooked my own ROM and got an expired trial version with it. Remove Programs in Settings does not list it.
Is there a way I can unistall it, or at lease stop it from running? Like a registry setting?
Thanks,
Paul...
do a hard reset
The only way to fully uninstall GPRS monitor file is to do a hard reset.
aao588 , I don't think hard-reset will help, seems like he has 'cooked' the GPRS monitor into the rom. After hard-reset the program will be still in the rom, unless he flash it with another rom.
e1design, I don't use this software, not sure about it, you can try look into the \Winodws\Start up folder, delete the .lnk or exe file that start this program.
First remove it from the Today items
Then go to \Windows\Startup and delete the file called GPRS Notify
Finally soft reset
Tekflow said:
First remove it from the Today items
Then go to \Windows\Startup and delete the file called GPRS Notify
Finally soft reset
Click to expand...
Click to collapse
You're right - it worked. Thanks!
Hi folks,
I've really been trying to find the information I'm asking for. So please just tell me if my questions have been asked before
I'm using the unbranded Tytn with Eplus (ger). The device itself works and I wouldn't change anything about the software if it wasn't for Active Sync. I sometimes have to end it with the Task Manager and start it again before it will sync anything. He doesn't even connect to the Exchange server. Sometimes there's the message "waiting for network" (or similar, own translation). Sometimes there simply NO message at all (where he usually says "looking for changes", etc.
Finally he claims the host is unreachable - other applications (Pocket IE, e.g.) don't see a problem getting their packets out.
This is great with Push Mail. As far as I can say he gets his problems when I'm moving (driving car, even when going to the other side of a building): He changing the cell phone masts. He loses his connection and is uncapable of regaining it.
Does anyone know this problem? And if, is it fixed by any update? I'd say since it seems to be an application-only problem upgrading the windows rom should be enough, shouldn't it?
And how can I use the rom from Vodafone with my original extended rom to keep my provider settings?
First of all try the EXtROM unlocker to make sure it works on your current ROM or look for your ExtROM on the Wiki.
If you can unlock your or if your ExtROM is on the Wiki then you can just update the windows ROM. When the ROM is updated and you go through the initial setup, wait for it to say it will install some additional programs. Hit soft eset before the timer counts down to the install of the ExtROM to stop it.
Then use the ExtROM unlocker and delete all the stuff in there. Then put your ExtROM contents in there. Next, either run the ExtROM stuff manually or I usually do a hard reset and let the device do it automatically.
If that doesn't fix your connection problems I would suggest exchanging it for a new one if possible.
I also like the fact you refer to your TyTN as a 'He.'
jokinawa said:
First of all try the EXtROM unlocker to make sure it works on your current ROM or look for your ExtROM on the Wiki.
If you can unlock your or if your ExtROM is on the Wiki then you can just update the windows ROM. When the ROM is updated and you go through the initial setup, wait for it to say it will install some additional programs. Hit soft eset before the timer counts down to the install of the ExtROM to stop it.
Then use the ExtROM unlocker and delete all the stuff in there. Then put your ExtROM contents in there. Next, either run the ExtROM stuff manually or I usually do a hard reset and let the device do it automatically.
If that doesn't fix your connection problems I would suggest exchanging it for a new one if possible.
I also like the fact you refer to your TyTN as a 'He.'
Click to expand...
Click to collapse
Mine is a she...anyways though
jokinawa I thought we could have the ext rom initiate itseld unless the cabs were signed with htc's thingy? unless this has change recently. Oh how I would love to try the south africa rom with a cingular ext rom and some goodies...
slimsaturn said:
Mine is a she...anyways though
jokinawa I thought we could have the ext rom initiate itseld unless the cabs were signed with htc's thingy? unless this has change recently. Oh how I would love to try the south africa rom with a cingular ext rom and some goodies...
Click to expand...
Click to collapse
hehe
I use the Imate 1.20 ROM with the Softbank ExtROM that autoinstalled after I replaced them and did a hard reset. I also did it previously with the HTC ROMs.
then it should work fine since all those cabs came from the carrier. but i meant for say installing ms voice command
Reference:
I think since its capabilities to frustrate his owner this devices definitely have to have a soul. Or are at least living somehow.
Okay, I have to admit, "she" would be more appropriate in this case, but...
I'm still used to the update procedures from my old Qtek 9090, where the rom, radio and ext were in 3 seperate image files and where you could just delete those you didn't want to be upgraded.
I wasn't sure if I would have had all the Vodafone stuff and couldn't reverse it. But you seem quite sure that their individual stuff is in the Ext I'll have a try tonight.
My Ext can be downloaded from the site. So I can skip extracting it.
By the way: I the ftp server sometimes down? I couldn't connect yesterday from home. Now, from work, it works fine and fast.
No, didn't really work. I've got the impression that it is a little bit more reliable, but what is a push mail service that can't provide at least 99% availability? If I have to look at my phone every hour to make sure Active Sync is still doing what it is supposed to do.
I've not heard of many people experiencing this problem, but since it is only Active Sync (other programs don't have this problem) I don't see what I would get by having the phone replaced... ?
I just went back to dcd 2.3.2 and 3.27 radio to get back higher data speeds and working set up in my car (seidio car kit that doesn't work right between new radio/rom and bluetooth/external audio). Anyway, all looks fine but when I type any of the programming codes in the dialer(and I have my unlock code), nothing happens. I get no edit screen or anything. Seems like this could be a dialer issue. Anyone seen this? I think I have the stock dialer and when I built my rom I don't think I included the newer dialers at all. maybe this is the issue? I can run epst from the windows directory I guess but not sure I have changed what I need there. the usual reprovisioning with ##code# was so simple with just the two entries of my phone number. Any help is appreciated.
Dailer
Did you install a different dialer after loading the rom. I've done that (htc dialer, big button dialer) and then codes wouldn't work until after I uninstalled them . . . for what is woth!
I had a similar issue, but on verizon. When I went to cook the ROM there where 2 dialer options: 1 for the vouge (default) and 1 for the titan. I'm not sure which I selected, but it had the touch-like dialer. Anyway, when it didn't work I flashed to DCD 3.0.1 (no kitchen) and it worked.
I rebuilt the rom with the default selections for the dialer and it worked again.
My new HTC S740, just hard resetted, can't run as many apps I used to use on my old Moto Q, like dotfred's task manager, or wm5torage (I know that the function is builtin, but for the record, that program doesn't run). These programs crash just when you run them.
Also, PIM Backup crashes the same way when trying to restore messages. Luckily, it estracts the contacts backup before crashing so I can restore contacts alone.
I suspect it has to do with app unlock. I can't edit the necessary registry keys with regedit stg or mobileregistryeditor because they error out ("access denied").
What can I try? SDA_ApplicationUnlock might work?
My phone is TIM-branded (italy) and has a 20282 build rom (1.15.901.0, R 0.29.30.22, P 12.29.30.09H)
EDIT: already tried this S740-specific unlocking howto but it doesn't work, cause Regedit still says access denied.
I attached the application unlock CAB in this thread:
http://forum.xda-developers.com/showpost.php?p=2211556&postcount=7
I used it on S740 and it works
[email protected] said:
I attached the application unlock CAB in this thread:
http://forum.xda-developers.com/showpost.php?p=2211556&postcount=7
I used it on S740 and it works
Click to expand...
Click to collapse
Many Thanks!! It worked!