I Installed Hyperom using all proper procedure, but after a couple of day's couldn't get on with it, so downloaded a new Rom and went through the usual procedures of Task 29 etc....loaded new custom Rom......only looked 80% like it was suppposed too, even tried other Roms - same result.
Main this is that even after using a decent sdhc memory card formatter... ........I can do task 29, 50,000 times, soft resets, flash to standard rom, ...format again....bacically no matter what do, The first 5-10 seconds of the new Rom loading STILL displays the text from a previous Rom.
It's a black screen, comes up saying "Hyperrom".....about 10 seconds later, the new upgraded Rom loads up, but never looks or performs like it should.
I've made sure installing correct radios etc for whatever Rom I download, tried bootloader format, active sync format, left memory card out.....no matter what I try parts of the old Rom still remain.....frustrating.
Any Ideas?
Tried everything I can, used search funtion in orum etc......6-7 different Roms, all with correct Radios and installation procedures...still get black screen with "Hyperom" logo and black screen, new Rom loads and works, but only 80%......ARRGGHHHHHH
Weeks this been happening now.
please please please can somebody help me??
much appreciated
Matt
the first screen up to the animation is a splashscreen or bootscreen, and is not connected to the ROM, meaning unless you flash a stock rom, or a custom that includes one(like the one you hve stuck there) then it will remain.
you can flash bootscreens just like roms and radios,
read this, especially posts 2 and 36
http://forum.xda-developers.com/showthread.php?t=684301
Related
I have a Sprint HTC touch pro. I unlocked it the day I got it, and have flashed mightyrom6, juicy, and a couple others to it without problem. What I'm seeing now is the ROMs are going very slow, freezing when I just try to read a text message, etc. I have a feeling that some things from the ROMs aren't completely getting wiped when I flash the new ROM. Someone suggested flashing the stock OS to the phone to clear this garbage. Is this a good idea? Does anyone else have this problem, or a solution to it? Thanks
It's definitely worth a try, it worked for me.
I had been trying out all the new 6.5 ROMS out there. At some point it wasn't slow per se, but it would completely freeze, and then I'd have to soft reset. *IF* it got past the loading screen, it would take me to the initial configuration, as though it had been hard reset. I couldn't make it 48 hours without it doing that. Didn't matter which 6.5 ROM I tried, it always did the same thing.
(shameless plug for Sashimi and Makisu! Lifesavers!)
Tried leaving out the microSD card in case it was bad data - no luck.
Tried not configuring anything - just using it as a phone - in case it was a corrupted CAB or something. Not that either.
At the end, I gave up and I was prepared to take it into the Sprint store. (I bought my phone on Ebay, so no idea what kind of success I would have had, if any.) I flashed back to stock rom, installed my cabs and user settings, etc. and waited for it to happen.
It's been over a week now, absolutely no problems.
Long shory stort: flash back to stock ROM and see how it turns out.
Good luck!
weso has a good point...But
Flash back to stock, hard reset.
Flash your ROM of choosing, hard reset
enjoy new Rom
I find after a couple flashes that I need to flash back to stock hard reset then flash new Rom. After that I tend to have a much more enjoyable experience.
Interesting. I wonder if there's any way to explain that, or if we have to put that in the X-files folder - just one of those things.
I also ALWAYS go into the bootloader manually by rebooting with the reset button and holding power and vol-down. Not sure if it makes a difference or just makes me feel better, but I've had zero issues doing it that way, so that's what I keep doing.
Mightyrom6
Hey out there! Can anyone help with this problem I am having. With the MightyRom 6 on the Touch Pro for Sprint? When Touch Flo is enable and you slide the tab to settings and tap All Settings on the bottom left it will go to Connections Only! It will not go to the All Settings screen. Can anyone help me? I know how to edit the registry but, can't find anything out there. Please Help!
Many believe this happens due to not "flash dancing" (flash then hardreset).
Be wary of doing this with generic stock roms, ive had an experiance in which my prl and qcn files were reset to the generic stock ones of a diffrent provider, which in turn got me to take the phone in and get it carrer flashed again ( NO CARRIER SPECFIC ROMS OR STOCK FOR TBAYTEL!!! . god bless tbay tell lol, but anyways after the initial flash of a rom you like, before you load it with cabs install one at a time to ensure proper installation and compatability with your current rom. Also before you run any freshly installed apps/cabs be sure to soft reset after install.
My method of flashing
Ensure battery is above 80%
Fully synced and connected
Freshly rebooted computer and phone
Update/Flash phone
Hardreset after customize and initial setup
Re-configure customise/etc
soft reset
Good to GO!
Also with every flash there is the posability of it just being a bad flash.
in some cases the freezing and such may be pagepool/Driver issue's with your hardware
I was using my HD2 the other day for both Android and Windows mobile (Stock ROM). I had no problems with it at all, and at this particular time, had it on WM, but when I took it out of my pocket to use it I noticed there was nothing but a white screen. I tried restarting and I still get nothing but that same white screen.
I'm able to access the bootloader and it shows as having HSPL installed, though any attempt to install a ROM leaves it stalled at 0%. I can update the LEOimg.nbh through the storage card, but as soon as it's done and I restart, i'm right back at that white screen.
I feel like i've tried absolutely everything to attempt to fix this, and I wouldn't clog up the forum with another thread if I wasn't absolutely lost. If anybody could help me with this, I would hugely appreciate it as I can't be without a phone for too long, and being unable to remove HSPL means I can't take it back to the store.
Thanks for any help.
EDIT: Phone appears to have fixed itself now.
ive been running the energy rom for like two months now everything has been fine. today my phone hangs a little bit so i restart it and it wont boot all they way up!!! what do i do to fix this please help!!!its stuck at the screen right after the screen of the color sparklers.
[email protected] said:
ive been running the energy rom for like two months now everything has been fine. today my phone hangs a little bit so i restart it and it wont boot all they way up!!! what do i do to fix this please help!!!its stuck at the screen right after the screen of the color sparklers.
Click to expand...
Click to collapse
use the proven process of elimination, have you installed something recently?
a Manila Mod, or tweak? I hope you have a backup of everything essential
on your device, as it may that you need to HR
maybe its only a dead sd card..
take out sdcard, sim card and battery for a few minutes and reinsert only the battery and try to boot up...
if this doesnt work, you'll need an hard reset..
so i kept resttiing until it booted up. then i saw these posts and decided to restart the phone and it doesnt work again. so i reset again an pressed the talk button then it went to the launching sense screen. me being a gambler i reset it again and it stalled again until i hit the talk button. now i reset it a couple of more times and its back to loading normal on its own. im only stating everything i did just in case someone else might come across this problem at some time. thanks for you guys quick response and help
Try a full reinstall using the flashaholic app that does a full OS ROM format, also backup any files on the SD card and reformat that too and see what happens.
I should add that the full "task 29" format thing probably wont work well unless you have HSPL installed (otherwise you have to first install a stock ROM, then SSPL install your custom ROM; kind of defeats the point of the full format!)
installed the hspl, updated to the radio rom to 2.14.50.04 and using desirebuild_v 5
starts normally with the dissolved numbers and the penguin guy but then just goes on forever about the battery percentage. just a bunch of numbers and batt: 52%
batt: 51%
ect. for pretty much ever
is there something that ive missed?
chrisman99 said:
installed the hspl, updated to the radio rom to 2.14.50.04 and using desirebuild_v 5
starts normally with the dissolved numbers and the penguin guy but then just goes on forever about the battery percentage. just a bunch of numbers and batt: 52%
batt: 51%
ect. for pretty much ever
is there something that ive missed?
Click to expand...
Click to collapse
Try this:
You seem to have WinMo and a compatible radio.
1. Format your SDCard with FAT32 (backup your data first) (what kind of card do you use? (size and class))
2. Copy your android to your SD card (read the installation guide of the chef, not all Android Builds runs from /Storage Card/Android)
3. Run CLRCAD.exe (or something like this) and then Haret.exe.
4. Be patient, it will take a few minutes at the first boot.
5. if you complete the setup process reboot and then you can do what ever you want
tried that same thing.
just repeats the same 5 lines or something over and over
i have a small question, i successfully booted to android, question is when i need to reboot my phone i cannot lunch android again , can you help me ?
chrisman99 said:
tried that same thing.
just repeats the same 5 lines or something over and over
Click to expand...
Click to collapse
Ok... We try some other things
What HD2 do you have?! 512MB or 1024MB?
Which Radio do you use?
Which Android ROM?
Radio 2.12.50 has a better current cosumption for me. Maybe you try this radio, too
What you need to realise is that when we say "wait a few minutes" we mean up to and including 15... It can seem that the HD2 has frozen but wait long enough and it will boot into android, 1st it has to set up your card the way it likes with a (generally) 1Gb image file. This takes a little while to do.
Patience grasshopper......
Sorry for this not being directly related but it seems like a resonable place to ask my question. So ive flashed tons of winmo roms but just now starting to try android. I flashed nrgz's bare bones rom for android. and the only android that I can get to load is the one that nrgz posted himself a month or to ago. I have tried 3-4 different builds after and it starts linux but only for a second than either goes to an htc screen frozen. or a bright blue screen frozen. Ive tried everything that ive read about. I have reformatted my sd card twice. ive tried 3 different sd cards. ive tried a different roms. Nothing works. I like nrgz andoid ROM that he has with a froyostone build of android but it is VERY unstable and I cant get it to run for more than 10 minutes without freezing and want to try something alittle more stable. ANYBODY know what else i can try. thanks.
sorry i just figured it out. Im AN IDIOT> i thought that i had to see linux run all the way through like with nrgz. but apparently the htc screen is good. MY BAD>
safeburn said:
i have a small question, i successfully booted to android, question is when i need to reboot my phone i cannot lunch android again , can you help me ?
Click to expand...
Click to collapse
Follow my guide and never have to use winmo again.....
http://leoandroid.com/viewtopic.php?f=51&t=182
If you need to boot back into android you need to launch haret.exe. If you press on it and it does nothing then press and hold on it to get some options. If open is not in the options you can either download total commander to open the file or download EBL 2.1 and install it. Both of these apps are winmo apps. I found them online.
it turned out that it was due to the files been in the android folder and not direct onto the sd card which was a bit annoying cos thats originally how i had it before i read somewhere people put it in an android folder so did this to keep it organised.
still have a few errors tho and sleeping and dying so was gonna try the froyostone 3.2. this seriously wont but tho. blue screen straight onto black with green htc and left for ages with no luck. any tips on that one?
also im using rom version 1.66.405.2 if that would cause any issue?
tried froyostone 3.1 and got that to boot but still a bit hit and miss. also when it sleeps for long periods overnight its dies. is this normal or is there anyway to fix it?
AMCJUNGLE said:
Follow my guide and never have to use winmo again.....
http://leoandroid.com/viewtopic.php?f=51&t=182
If you need to boot back into android you need to launch haret.exe. If you press on it and it does nothing then press and hold on it to get some options. If open is not in the options you can either download total commander to open the file or download EBL 2.1 and install it. Both of these apps are winmo apps. I found them online.
Click to expand...
Click to collapse
Thank you very much , i will try this...
different builds seem to just not work for some people....
its all about trial and error.......
i went through about 6 different builds before finding one that 90% stable.....
its this one.....
When I bought my HTC One it already had a custom rom installed.
It was some stock android 4.2.1 nexus but with chinese interface and alot of chinese apps and recovery etc were all chinese.
So I couldn't do **** with this and tried to removing it and getting it back to stock HTC one rom.
After alot of tutorials online on xda and many others I couldn't find one that was easy enough for me to make it happen.
It was also my first time with a HTC. Never done it via fastboot/commandprompt etc.
I'd like to add that I am on a MAC aswell It took me a while to find a tutorial via mac but mine simply did not accept those commandlines which worked in the tutorials.
Afterwards I tried flashing it via recovery by installing from SDcard. Which is probably quite the stupid thing to do but I was angry and didn't know any other options since everything failed.
After It started installing stock rom from SD card it was stuck at a screen with "No command" A lying dead android with a red triangle above him and there was one line: Install /sdcard..
I was hoping he would install it but he didn't do anything and got stuck there.
I couldn't restart, couldn't get back to recovery, to anything nothing worked.
I waited untill battery life was drained.
Which happened and after batterylife ended and I put him back on a charger nothing happends.
Phone wont turn on whatsoever.
When I put him on a charger the phone blinks real quick to a white screen and goes back to black screen and still doesnt start whatsoever.
How ****ed am I ?
Can I get rid of this?
Can I still install that stock ROM that I so badly want?
Thanks