I was using my HD2 the other day for both Android and Windows mobile (Stock ROM). I had no problems with it at all, and at this particular time, had it on WM, but when I took it out of my pocket to use it I noticed there was nothing but a white screen. I tried restarting and I still get nothing but that same white screen.
I'm able to access the bootloader and it shows as having HSPL installed, though any attempt to install a ROM leaves it stalled at 0%. I can update the LEOimg.nbh through the storage card, but as soon as it's done and I restart, i'm right back at that white screen.
I feel like i've tried absolutely everything to attempt to fix this, and I wouldn't clog up the forum with another thread if I wasn't absolutely lost. If anybody could help me with this, I would hugely appreciate it as I can't be without a phone for too long, and being unable to remove HSPL means I can't take it back to the store.
Thanks for any help.
EDIT: Phone appears to have fixed itself now.
Related
Hi all,
Yesterday I was playing Angry Birds (in Android), when screen turned black and my HD2 started to make a buzzing noise. I took the battery out, and since then my won't boot. When I turn on my phone I only get the white HTC bootscreen, wich is white/black striped, and it doesn't boot any further. I included a photo of the boot screen.
I already tried multiple hard resets, no effect .
Ouch.......
Can you get to bootloader.......?
(hold vol down while turning it on)
If so, is that black n white striped too??
take the sd card out too, the one evening i tried android it all went bad and i had to hard reset, and it refused to work with the sd in.
I tried hard reset without sd card a couple of times, but nothing changed.
Bootloader works, without stripes. I already tried to flash the stock rom. I put the stock nbh file, renamed to LEOIMG.nbh, on a FAT-32 formatted sd-card, but when I started the phone in bootloader (vol down+power), the "loading" screen dissapeared as quick as it showed up and the phone got back in bootloader mode (4 color screen)..
valkjuh said:
the "loading" screen dissapeared as quick as it showed up and the phone got back in bootloader mode (4 color screen)..
Click to expand...
Click to collapse
that usually means a mistake with teh card size, formatting, nbh file or something.
I tried 2 different sd cards now, 1gb and 4gb, both did the same.
I'm going to sleep now, i'll try some custom ROM nbh-files tomorrow, hope that wil work.
Tried a few custom ROM's, all didn't work.
I'm starting to think about sending my HD2 to HTC, but I'm not sure if they can fix it. I've lost my warranty since there's Cotulla's HSPL installed, but I can't get it uninstalled because my HD2 won't install nbh-files.
I know I'm going to have to pay for this, but I rather pay than having a bricked phone.
no need to flash .nbh to remove hspl, , just run hspl.exe in bootloader and choose stock spl.
valkjuh said:
Hi all,
Yesterday I was playing Angry Birds (in Android), when screen turned black and my HD2 started to make a buzzing noise. I took the battery out, and since then my won't boot. When I turn on my phone I only get the white HTC bootscreen, wich is white/black striped, and it doesn't boot any further. I included a photo of the boot screen.
I already tried multiple hard resets, no effect .
Click to expand...
Click to collapse
Hi,
Did you find any solution for that problem?
Thnx
i must say. my phone (htc hd2) did the same so please did you find a solution?
Ok, so before the general populace of the forum, looks over this post thinking it's some noob who cant read through the forums to solve there own problem, i would like to say thanks in advance to anyone who can seriously provide some help.
Problem is as follows:::
1,)Phone is working fine using mini-winmo+cyan droid
2,) -PROBLEM- My android stops working, so now im stuck using a lite version of winmo
3,) Tried formatting the sdcard with the lite version winmo built in sdcard formatter, doesnt solve anything, dont exactly know what i was trying to solve with this step.
4,) I decide to get a nice fancy version of winmo, figured it would be as easy as just flashing it once n done.
5,)Decided on going with Ozrom, looked the best at the time.
6,) Run the ruucustom as admin, everything goes fine.
7,) -PROBLEM- after flashing the first boot leaves me stuck on the bootscreen.
So after all that i took the advice and tried to get back to the stock Tmous ROM, but as im typing this im still stuck on the Stick together screen, and also just for a control group i downloaded the latest HD2 cell winmo rom release, and that left me hanging on there version of the boot screen.
Same problem, different roms.. stuck on the loading/boot screen.
But, with the stock rom after playing around with removing the battery, simcard,sdcard and what have you i got the stock rom to boot!!!! I was so excited, i skipped the "How to use the on screen keyboard" tut and was typing in my email info when the phone reset on its own and all my hopes went down the drain... hopefully i will get some help on the issue, and like i said previously in the first paragraph i appreciate any and all help.
thanks.
---UPDATE---
Phone is on and working, intermittently.
When i plug the phone into the charger and wait for the amber light, it will boot up and actually enter into windows, now heres the kicker, removing the charger and using the phone will result in the phone turning off and restarting itself, hanging on the stick together screen.
Removing the battery, and replacing the battery after i push all the buttons, the same way you would power cycle a TV remote, and then connecting it to a charger is the only way ive been able to maintain the operation of the device.
Any ideas?
Try doing task29 reinstall winmo Rom of choosing.. see if that helps.. also I flash everything from bootloader. Also check battery pins make sure they aren't bent..
Sent from my Mytouch HD2
Hello, my HD2 started entering the re-boot loop probably because of overheating (I live in a warm country and it started showing problems during the summer). After that, I installed the new official rom from the HTC website (finding a SN online :S) after trying to install the new rom I realised I shouldn't have tried that since it wasn't made for my SN. Anw after that the phone is kind of dead, freezes at the HTC boot screen. I have installed HSPL 1.42 on it but I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. (after such an error on the startup screen I still see the HTC logo but this time with black and white stripes covering the screen). I can't seem to find something similar in the other posts, I hope it wasn't answered somewhere previously. Even if so please redirect me or tell me what else to try since I'm quite frustrated!.. Please explain thoroughly because it's been a while since I was into hd2 tech stuff. Thank you in advance!
PS: Can I somehow find what rom I currently have IF there is one installed? I'm lost here....
t45o5 said:
Hello, my HD2 started entering the re-boot loop ...........................Anw after that the phone is kind of dead, freezes at the HTC boot screen. ................I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. .
Click to expand...
Click to collapse
check the battery pins. ive read of people for whom it is possible to get into bootloader, and it seems like normal, but then it fails to load when trying to boot fully, usually a reboot loop.
forget about finding what rom is on there currently, its time wasted, really.
a better use of your time is using your serial to find out which rom the htc website will let you have, and flash that, from sd card preferably.
Why not just reset the phone, and start over?
found a good rom, installed it via sd card, still reboot loop. that make me think that the problem might be the battery pins. if so what's the solution?
same thing happend to me just adjust the pins
Foxanax said:
same thing happend to me just adjust the pins
Click to expand...
Click to collapse
how do you adjust the pins? They're supposed to be straight right?
t45o5 said:
Hello, my HD2 started entering the re-boot loop probably because of overheating (I live in a warm country and it started showing problems during the summer). After that, I installed the new official rom from the HTC website (finding a SN online :S) after trying to install the new rom I realised I shouldn't have tried that since it wasn't made for my SN. Anw after that the phone is kind of dead, freezes at the HTC boot screen. I have installed HSPL 1.42 on it but I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. (after such an error on the startup screen I still see the HTC logo but this time with black and white stripes covering the screen). I can't seem to find something similar in the other posts, I hope it wasn't answered somewhere previously. Even if so please redirect me or tell me what else to try since I'm quite frustrated!.. Please explain thoroughly because it's been a while since I was into hd2 tech stuff. Thank you in advance!
PS: Can I somehow find what rom I currently have IF there is one installed? I'm lost here....
Click to expand...
Click to collapse
Hi,
Did you find any solution for that problem?
Thnx
Hello!
I use android with the htc hd2 for about 1 year ago, and the i want to back to windows mobile. I came from android, and when i finished the rom install the phone is stop when the windows mobile (orange color installer,please wait while your device is starting for the first time...) installer is finished it's always power off or just do nothing. I try to install a custom too. Neither the original and neither the custom din't work. The android work great, but i want the windows mobile 6.5.
If you have an idea please tell me.
Sorry for the bad english.
First of all, congratulations to your first post.
How have you tried to install WM?
Have you removed HSPL?
Have you changed RADIO?
Maybe you will have a look on this thread: http://forum.xda-developers.com/showthread.php?t=1421179
uli71 said:
First of all, congratulations to your first post.
How have you tried to install WM?
Have you removed HSPL?
Have you changed RADIO?
Maybe you will have a look on this thread: http://forum.xda-developers.com/showthread.php?t=1421179
Click to expand...
Click to collapse
I find my problem:
MicropERROR:
Microp Version Mismatch
0x0
Please update lateset Microp
firmware
What can i do?
somebody have the same problem?
The touchscreen isn't work in windows mobile, but if i install android or windows phone 7 the touchscreen is working
Mene44 said:
I find my problem:
MicropERROR:
Microp Version Mismatch
0x0
Please update lateset Microp
firmware
What can i do?
somebody have the same problem?
The touchscreen isn't work in windows mobile, but if i install android or windows phone 7 the touchscreen is working
Click to expand...
Click to collapse
I changed the radio the spl,hspl, rom(custom,orginal)... but nothing
bear with me here, guys, as i am new to not only this site, but to the world of htc and smartphones all together...i apologize in advance!
so my friend had this htc lying around and said i could have it since my previous phone took a crap. it's on tmobile so i was going to have it flashed over to at&t.
however, the phone seems to be a brick....it will not boot past the initial "stick together" screen.
yes, i tried the hard reboot...pressing and holding volume up+volume down+power button. it takes me to the screen asking if i want to reset the device..i hit volume up to confirm. it goes through the reset. i hit volume up to boot the device. it gets to the "stick together" screen, vibrates 7 times, and freezes.
well, it was doing that anyway...but only when plugged in. the little orange light used to turn on when i connected the charger--now nothing.
and now it won't let me into the hard boot screen again. just...black. removing the battery and replacing it does not work.
i had taken it to the gentleman to flash it to at&t, not knowing this problem existed. he called me (because i left the phone there, since he had a line of people) to tell me the phone was freezing on that screen. i gave him the ok to do what he called a "hard wipe". i went back for the phone this morning and he said he did the hard wipe, and it was still freezing--told me the phone was only good for parts at this point.
so i took it home. i plugged it in, and i did what i described above.
what the heck do i do?! i would love to be able to rescue this phone! like i said, i'm totally new to all of this so if you're going to throw terms at me like RUU (which i saw all over this site), i have no idea what you mean so please post a link to another thread or something that can explain these things to me, if you do not want to do so yourself.
oh, my friend also said she had put an at&t sim card into the phone (unflashed, still on tmobile) before and tried to turn it on...but nothing happened. could that be what caused the problems?
UPDATE: took the battery out for approximately 10 minutes. put it back in, and the phone turns on again...one short vibration while the screen is still black, then the "stick together" screen pops up and the phone vibrates 7 more times....annnnnd freezes again. its also starting to get very hot on the bottom, backside...
Had this phone for a while rooted it and everything was fine, then after replacing the phone i gave it away to a friend. Weeks later my friend asks for help saying it just sits on the AT&T logo, i take it and fiddle with it for a while.
My problems are
1.Wont boot past first splash screen.
2. Wont go into hboot if i try one of two things happens
1. If a sd card is in it a screen saying Firmware update Step 1/2 Unpacking then at the bottom it says update failed and sits on this screen.
2. If no sd card is in it will display a bright pink screen and just sit there
It was rooted
I have no idea what my friend did but suspect he isnt the culprit
different sd cards do not change anything
I have exhausted my knowledge about android and would like any advice.