Had this phone for a while rooted it and everything was fine, then after replacing the phone i gave it away to a friend. Weeks later my friend asks for help saying it just sits on the AT&T logo, i take it and fiddle with it for a while.
My problems are
1.Wont boot past first splash screen.
2. Wont go into hboot if i try one of two things happens
1. If a sd card is in it a screen saying Firmware update Step 1/2 Unpacking then at the bottom it says update failed and sits on this screen.
2. If no sd card is in it will display a bright pink screen and just sit there
It was rooted
I have no idea what my friend did but suspect he isnt the culprit
different sd cards do not change anything
I have exhausted my knowledge about android and would like any advice.
Related
I was using my HD2 the other day for both Android and Windows mobile (Stock ROM). I had no problems with it at all, and at this particular time, had it on WM, but when I took it out of my pocket to use it I noticed there was nothing but a white screen. I tried restarting and I still get nothing but that same white screen.
I'm able to access the bootloader and it shows as having HSPL installed, though any attempt to install a ROM leaves it stalled at 0%. I can update the LEOimg.nbh through the storage card, but as soon as it's done and I restart, i'm right back at that white screen.
I feel like i've tried absolutely everything to attempt to fix this, and I wouldn't clog up the forum with another thread if I wasn't absolutely lost. If anybody could help me with this, I would hugely appreciate it as I can't be without a phone for too long, and being unable to remove HSPL means I can't take it back to the store.
Thanks for any help.
EDIT: Phone appears to have fixed itself now.
Hi all,
Yesterday I was playing Angry Birds (in Android), when screen turned black and my HD2 started to make a buzzing noise. I took the battery out, and since then my won't boot. When I turn on my phone I only get the white HTC bootscreen, wich is white/black striped, and it doesn't boot any further. I included a photo of the boot screen.
I already tried multiple hard resets, no effect .
Ouch.......
Can you get to bootloader.......?
(hold vol down while turning it on)
If so, is that black n white striped too??
take the sd card out too, the one evening i tried android it all went bad and i had to hard reset, and it refused to work with the sd in.
I tried hard reset without sd card a couple of times, but nothing changed.
Bootloader works, without stripes. I already tried to flash the stock rom. I put the stock nbh file, renamed to LEOIMG.nbh, on a FAT-32 formatted sd-card, but when I started the phone in bootloader (vol down+power), the "loading" screen dissapeared as quick as it showed up and the phone got back in bootloader mode (4 color screen)..
valkjuh said:
the "loading" screen dissapeared as quick as it showed up and the phone got back in bootloader mode (4 color screen)..
Click to expand...
Click to collapse
that usually means a mistake with teh card size, formatting, nbh file or something.
I tried 2 different sd cards now, 1gb and 4gb, both did the same.
I'm going to sleep now, i'll try some custom ROM nbh-files tomorrow, hope that wil work.
Tried a few custom ROM's, all didn't work.
I'm starting to think about sending my HD2 to HTC, but I'm not sure if they can fix it. I've lost my warranty since there's Cotulla's HSPL installed, but I can't get it uninstalled because my HD2 won't install nbh-files.
I know I'm going to have to pay for this, but I rather pay than having a bricked phone.
no need to flash .nbh to remove hspl, , just run hspl.exe in bootloader and choose stock spl.
valkjuh said:
Hi all,
Yesterday I was playing Angry Birds (in Android), when screen turned black and my HD2 started to make a buzzing noise. I took the battery out, and since then my won't boot. When I turn on my phone I only get the white HTC bootscreen, wich is white/black striped, and it doesn't boot any further. I included a photo of the boot screen.
I already tried multiple hard resets, no effect .
Click to expand...
Click to collapse
Hi,
Did you find any solution for that problem?
Thnx
i must say. my phone (htc hd2) did the same so please did you find a solution?
Please help me, I played around with BBs yesterday and lost radio, so installed a stock FW with FlashTool, and got radio back again, but on some 4x BB.. Wanted the new 58 BB, and found out that a .. ..0.16 FW would give me that, so installed the polish one (found no other), and after that no response when touching the screen!
xRecovery is of course gone after "stocking" (also rooting?), but I have tried a number of FWs for FlashTool, and even FW directly from S-E using Update Service, but still my phone is next to bricked.. I am n00b and could very well have done something wrong unknowingly, and/or overlooked something, but what might that be, and what are my options?
Sounds like corrupted FW. Not a big deal cause without a cracked Bootloader, you realy can't screw the phone up.
Turn phone completely off.
Pop Battery - SIM card - Micro-SD card out.
Let it sit for a few minutes.
While your letting it sit, take your Micro SD card and Format it using your PC.
"not saying this is your issue but I have had the phone lock up and appear to be unresponsive due to a corrupt file on the SD Card and it fails to mount and gets stuck." If you have any files you want to save, copy them to your PC Hard Drive.
Reinsert your SD Card - Sim Card.
Plug your USB cord into your phone " LEAVE THE BATTERY OUT "
Start up SEUS " Sony Erricson Update Service ".
While holding the back button, reinsert the battery.
Follow the instructions and restore the phone to factory settings.
I hope this works for you as this should elliminate any problems that could have or would be occuring prior. If it doesn't, shoot me a mail and I will get with you on messenger for trouble shooting.
_-_- Press Thanks if its useful-_-_
Nope, didn't do it, touched the thanks-bottom anyway, because on my PC I can...
PM'ed xKrisx, but everybody are welcome with suggestions as I'm completely lost without my phone!
Edit while waiting, hoping:
Followed instructions above several times now, except
xKrisx said:
.. .. .. and restore the phone to factory settings.
Click to expand...
Click to collapse
no such option, wouldn't that be S-E-Android 1.6 ? In fact I see no other options in SEUS than accepting (or not) uneditable choices towards an update -and done-, so I suppose that's what was meant(?)!
Have tried a number of slight variations including SEUS update without sim and SD at all (was actually allowed that), but most noticeable difference was that first boot pre-choose English instead of Danish (my language), and still no response from touch screen, so can't select anything at all!
My phone shows evidence of "moderate physical pressure" (bought second hand with one corner missing), so I can't totally reject the possibility of a sudden HW digitizer breakdown though I think that would more likely have occurred while phone in use than while sitting on my mouse-pad.. No matter what, I would really like to exclude any SW related errors before moving to torx-driver surgery! Plz help guys!
Hi seek4
Did you ever find a solution for your touchscreen?
Hey Everyone,
I just bought the Atrix today. Love the phone. Rooted it in 1.2.6 and side-loaded. Attempted to install GreyBlur through SystemRestore and after I restarted the phone after installation, the phone can't get past the Dual Core Technology screen. It will get stuck on that screen, the indicator will flash red a couple times then it will restart and repeat.
How can I fix this?
Addendum
I tried holding power and vol-down and it showed fastboot at the top but nothing happened after that.
I installed GreyBlur from internal storage rather than SD (dont know if this matters)
If I want to take it back to the AT&T store is there anyway they can check that I rooted it?
Hello
Do this http://forum.xda-developers.com/showthread.php?t=991072
Then this http://forum.xda-developers.com/showthread.php?t=1016060
Once it is done try to flash your ROM again.
hey guys ...
there is the whole story
My friend's HD2 device was working in strange way, When restarting it gives a white screen and the HTC logo and freeze at this screen and then after a large number of re-starting it works, but when re-restart it again it return to the white screen
After a Hard Rest through the sound buttons the top and bottom were formatted but the device remain standing at the white screen after a Hard
the only solution to me was upgrade to new Rom and after read in the forum that This problem can be a lack of Compatibility between the Rom and the radio, but I think that the device had not been updated b4 by a lack of awareness of my friend, and then check the SPL version ,it was 1.42.000 (still locked) then try to ulock it by HSPL2_RUN as posted in some thread
it done right and the message "we hacked .." and enter boot-loader and checked it became 1.42.spl then I tried to upgrade by the following Rom:
RUU_Leo_HTC_WWE_GCC_1.43.488.1_Radio_Sig ned_15.26.50.07U_2.04.50_22_2_Ship
When updating the device whenit reached 9% did not complete the upgrade untill the upgrade process stopped by itself so I did restart the black screen appeared within a triangle inside the exclamation point.
now I started to be panic, and then search the net and found the advice from someone to use Task29 before the upgrade and when I run the program worked fine and after restarting the white screen returned with the HTC logo inside
I tried again to upgrade the same Rom and returned the same result ,searching again and found many advise to upgrade the SPL to version 2.0 which is recommended by most members
After the successful conversion of the SPL took off the device and swithched to boot loader to make sure the validity of conversion and the back of the version then after restating the white screen appeared and when I tried to reboot again the device turned off, I tried several times and did not work I said maybe the battery and when i connect the charger it did not ship and the orange led did not spark, tried the USB method but same result
I tried another charger and a another usb cord and it did not work and I check the battery by an electronics specialist, He assured that the battery is fully charged.
And now the device does not function at all, not even shaking when running and screen or charging
please guys i need ur argent assistance ...even a thought may help
Note: This is not the first time for me unlocking and flashing thin , my last devices was: JAM - k-jam - Jazjam - Omnia (current)
king roro said:
hey guys ...
there is the whole story
My friend's HD2 device was working in strange way, When restarting it gives a white screen and the HTC logo and freeze at this screen and then after a large number of re-starting it works, but when re-restart it again it return to the white screen
After a Hard Rest through the sound buttons the top and bottom were formatted but the device remain standing at the white screen after a Hard
the only solution to me was upgrade to new Rom and after read in the forum that This problem can be a lack of Compatibility between the Rom and the radio, but I think that the device had not been updated b4 by a lack of awareness of my friend, and then check the SPL version ,it was 1.42.000 (still locked) then try to ulock it by HSPL2_RUN as posted in some thread
it done right and the message "we hacked .." and enter boot-loader and checked it became 1.42.spl then I tried to upgrade by the following Rom:
RUU_Leo_HTC_WWE_GCC_1.43.488.1_Radio_Sig ned_15.26.50.07U_2.04.50_22_2_Ship
When updating the device whenit reached 9% did not complete the upgrade untill the upgrade process stopped by itself so I did restart the black screen appeared within a triangle inside the exclamation point.
now I started to be panic, and then search the net and found the advice from someone to use Task29 before the upgrade and when I run the program worked fine and after restarting the white screen returned with the HTC logo inside
I tried again to upgrade the same Rom and returned the same result ,searching again and found many advise to upgrade the SPL to version 2.0 which is recommended by most members
After the successful conversion of the SPL took off the device and swithched to boot loader to make sure the validity of conversion and the back of the version then after restating the white screen appeared and when I tried to reboot again the device turned off, I tried several times and did not work I said maybe the battery and when i connect the charger it did not ship and the orange led did not spark, tried the USB method but same result
I tried another charger and a another usb cord and it did not work and I check the battery by an electronics specialist, He assured that the battery is fully charged.
And now the device does not function at all, not even shaking when running and screen or charging
please guys i need ur argent assistance ...even a thought may help
Note: This is not the first time for me unlocking and flashing thin , my last devices was: JAM - k-jam - Jazjam - Omnia (current)
Click to expand...
Click to collapse
Hi,
Since you have enough experience in flashing custom ROM, I would suggest you the following ways:
1. Make sure battery is at least 50% and the battery pins are not bent
2. Format your micro sd card to fat 32
3. Find and download the CORRECT STOCK ROM. You can download it from htc website if your hd2 is non branded, or you can download it from your carriers website if your hd2 is a branded one. Make sure the downloaded file is not corrupt due to download process
4. Extract the downloaded file using 7 zip or winrar. Find the file named: RUU_signed.nbh Then, rename it to: leoimg.nbh then copy it to the root directory of your micro sd card
5. Go into boot loader and follow the onscreen instruction. If therenis no hardware issue, it should work.
Good luck ...
thanks m8 but I've checked the pins and changed the battery with fully charged one ..
but it's no boot loader mode ... its completely off
thanks 4 ur support
Not offering solution, just an observation,,,, hanging at HTC screen and only occasionally booting, plus flashing hanging at. 9% is a bad sign, sometimes associated with a stuck radio, and/or/caused by thermal issues.
Try chilling the phone with stock nbh ready to go on SD card, in sealed bag in fridge/freezer for a while, then try to SD flash.
If flashing starts, (white screen blue writing) keep an eye out for "rsa radio fail" or similar.
if the flash goes well, but then later the problem returns, it's pretty conclusively hardware.
thanks buddy for the advise but as I mentioned b4 ...
the device doesn't boot anymore ... and yeah it's Hardware bug I think.
best regards