is it possible to make an app that allows you (next to the original lock) to just write a letter on the screen, maybe even in standby, that will unlock your screen. I don't need unlock problems so it would have to run together with the original lock/cht.
nobody??
Related
Hello:
I can't unlock my M600 because when I put the unlock code, the screen changes to "Input SIM PIN", but when I put the SIM PIN, the screen go again to input unlock code (is a loop).
This is all steps that I have made:
1) M600 without SIM card inside, connected to ActiveSync. I execute Lokiwiz03a without problems, all ok, and I get my 8 digits unlock code.
2) Power off M600 and I put a SIM card of other company.
3) Power on M600 and I get: "Input your PIN code..."
4) I put the SIM code and after 4 seconds the screen changes to "Network Locked. Please input the unlock code".
5) I put the 8 digits unlock code and after 2 seconds the screen changes to Step 3 ("Input your PIN code..."), and when I put the PIN code, the screen changes to "Network Locked. Please input the unlock code"..., IS A LOOP!!.
I'm desperate, I don't know that I can do. I have make soft and hard reset but I have the same issue.
Please, I need help..., what can happen?, exists any alternative method for unlock my M600?.
Thanks for all!!
Fossy_01 said:
Hello:
I can't unlock my M600 because when I put the unlock code, the screen changes to "Input SIM PIN", but when I put the SIM PIN, the screen go again to input unlock code (is a loop).
This is all steps that I have made:
1) M600 without SIM card inside, connected to ActiveSync. I execute Lokiwiz03a without problems, all ok, and I get my 8 digits unlock code.
2) Power off M600 and I put a SIM card of other company.
3) Power on M600 and I get: "Input your PIN code..."
4) I put the SIM code and after 4 seconds the screen changes to "Network Locked. Please input the unlock code".
5) I put the 8 digits unlock code and after 2 seconds the screen changes to Step 3 ("Input your PIN code..."), and when I put the PIN code, the screen changes to "Network Locked. Please input the unlock code"..., IS A LOOP!!.
I'm desperate, I don't know that I can do. I have make soft and hard reset but I have the same issue.
Please, I need help..., what can happen?, exists any alternative method for unlock my M600?.
Thanks for all!!
Click to expand...
Click to collapse
If you have another SIM card try that. Also, try removing the SIM PIN on the current SIM card. (you'll need another phone/device)
Solved!.
I have restore the full original Orange Rom and unlock code was work!!.
If anyone have this problem, I reccommended install the original rom and try again.
Thanks!!
Fossy_01 said:
Solved!.
I have restore the full original Orange Rom and unlock code was work!!.
If anyone have this problem, I reccommended install the original rom and try again.
Thanks!!
Click to expand...
Click to collapse
I think it might be worthwhile putting that in the lokiwiz thread/wiki entry.
Sorry 3v5y, I'm searching the Lokiwiz forum but I can't find...
Please, tell me the direct link and I will put the issue with solution.
Thanks
Here's one link: http://wiki.xda-developers.com/index.php?pagename=Prophet_Unlock_Sim
Thanks I3v5y.
I have modified the wiki.
Please see the result (the lines in red color is the lines that I have added) and if you believe it is necessary, rewrite my text because I think that my english is not good...
Instructions for SIM Unlocking your Prophet :
1. Download ftp://xda:[email protected]-developers.com/Uploads/Prophet/Prophet-tools/Lokiwiz03a.zip
2. Unzip Lokiwiz03a.zip somewhere on your computer
3. Make sure that your phone is connected via ActiveSync with the computer
4. Execute lokiwizMSL.bat on your computer
If it states: "Could not update itsutils.dll to the current version, maybe it is in use?"
Do the following :
*Copy the cab's from the Utils folder in the Lokiwiz03a.zip file to your Prophet and execute them.
(There are two files : "Cert_SPCS.cab" and "EnableRapi.cab")
*Execute lokiwizMSL.bat on your computer
5. It will give you the SIM unlock code after it runs, write it down somewhere.
* In some cases, if you get characters (or characters and numbers), indicates that your phone-pda was ulocked.
6. Just get a different SIM from the one your phone is locked to, and install it in the phone (you have to turn off your phone)
7. Turn on your phone
8. When it asks your pin code enter your normal pin.
9. It then asks you for the Service Provider Unlock Code: Here you insert the SIM unlock code you wrote down in step 5.
* NOTE: If you have a non original ROM, you can have a problem with unlock code, because when you put it, the screen
returns to SIM PIN code, and when you put the pin code, the screen changes again asking for unlock code...,
if this is your case YOU MUST CHARGE THE ORIGINAL ROM IN YOUR PDA, in this case only with your original rom you can
unlock the pda-phone.
10. That's it, enjoy your unlocked Prophet !
i have a problem with my x10.2 days ago i installed a program that changes the lock screen.but after one reboot it didn't work anymore (i do the unlock method but it didn't show my home screen and lock program cant unlock screen) and i cant use my phone.plz help me
What lockscreen did you use?
i think the application name is lock 2
hello....i've get the the unlock code but i have cyanogenmod and i don't know how to introduce it...
Guess you are referring to the SIM Unlock code.
You need to put a SIM card for another carrier and power up the phone, once you do this you will get prompted for the Unlock Code.
proimage said:
hello....i've get the the unlock code but i have cyanogenmod and i don't know how to introduce it...
Click to expand...
Click to collapse
I had this problem. Cyanogenmod does not prompt you for an unlock code when putting in a different sim.
You have to flash back to a stock rom, and then put in your unlock code. Then flash back to Cyanogenmod.
I have the same problem
masperdio said:
I have the same problem
Click to expand...
Click to collapse
As I said above, Cyanogenmod does not prompt you for an unlock code after putting in a SIM card from a different network.
You have to flash your phone back to a stock rom, boot up the phone with a different SIM, enter the unlock code, then flash back to Cyanogenmod.
I guess you can make a backup with Clockworkmod and then restore it afterwards. But I am not sure if the phone will be locked again.
Answer here:
This may help -
http://forum.xda-developers.com/showthread.php?p=22718405#post22718405
Temporary workaround for SIM Card prompt
I have the same issue with my Motorola Defy+ (CM 10.1.20130331-NIGHTLY-mb256) in Australia using Telstra
Here is a way to force the SIM card unlock prompt to appear.
1) Boot phone - no SIM unlock screen appears - no mobile signal available (Network Unavailable) - that's OK read on...
2) Go to Settings- Security - Screen Lock
3) Change your Screen Lock method - I've tried Swipe and Pattern - both work for me
4) Once I have set the new Screen lock method I am immediately prompted with the SIM card unlock prompt
5) I enter the SIM card unlock code and I have mobile signal
6) Change your Screen Lock method back to whatever you want it to be.
It's an annoying workaround, but at least you don't have to re-flash your phone to a stock ROM, enter the pin and then flash up to the latest mod again.
Hope this helps.
Hi guys,
Recently i bought a htc jetstream tablet but there is no "mobile networks" option in wirless and networks menu,as i knew we should unlock this device,so is there any help?
peyman_021 said:
Hi guys,
Recently i bought a htc jetstream tablet but there is no "mobile networks" option in wirless and networks menu,as i knew we should unlock this device,so is there any help?
Click to expand...
Click to collapse
for using any operator simcard :
1. you need unlock jetstream from htcdev.com
2. then root device, for this google it (e.g. how to root jetstream)
3. use any simcard you want !
wait u will see WIFI not working sad!!!
4. for fixing WIFI problem install wifix application (just work on rooted devices)
now u can use simcard and wifi both
I think the peyman_021 meant "How do I perform a SIM unlock?" and not "How do I unlock my bootloader?". In order to perform a SIM unlock (henceforth carrier unlock) on your Jetstream you will need to determine your IMEI and then use a carrier unlocking site.
Find out your IMEI:
On any device with a dialer you can call *#06#. This preferable because it is consistent across all operating systems (i.e. Android, iOS, Blackberry OS, Windows Mobile). Alternatively, you can navigate menus -- usually starting with Settings->About. This number (it does not feature letters) is essentially your cellular radio serial number.
Use Carrier Unlocking Site
There are many sites out there so find something or someone to guide you towards the best ones. As with most things price is often the determining factor.
You will need an online payment mechanism such as a credit card. They can cost as little as $10 USD and as much as $30 USD -- in my experience. They will ask you to enter your IMEI and sometimes your device make/model -- though the latter is redundant.
Once you submit your IMEI and payment then you will need to wait for an unlock code. It can takes minutes, hours and maybe even days for the site to reply -- typically via email. The unlock code is short and entirely numeric.
In order to enter the unlock screen you will have to trigger the enter lock screen dialog. On the Jetstream this is done by inserting a SIM card that is not from the original carrier. Most devices require you to power off to insert a different SIM, but the Jetstream can hot swap. Enter the unlock code and you are done.
Note that on the Jetstream you need to have a lock screen enabled to trigger the enter unlock code dialog. Perplexingly, it is the actual lock screen that triggers the enter unlock code dialog.
You should note that carrier unlocking is permanent, but since it is an improvement that is a good thing.
hi, where to get the wifi fix application? thanks so much in advance.
mamalypro said:
for using any operator simcard :
1. you need unlock jetstream from htcdev.com
2. then root device, for this google it (e.g. how to root jetstream)
3. use any simcard you want !
wait u will see WIFI not working sad!!!
4. for fixing WIFI problem install wifix application (just work on rooted devices)
now u can use simcard and wifi both
Click to expand...
Click to collapse
cx5 said:
hi, where to get the wifi fix application? thanks so much in advance.
Click to expand...
Click to collapse
I don't know what peyman_021 means here, but a clue is that he mentions needing a rooted device. This probably means changes to the /system partition.
Users of the kernel made by DooMLoRD require an updated wifi module. That is the closest thing I can think of to a "wifi fix application".
If you can post a screen capture of your problem then we may have more information to help you with. Download a screen capture app or simply take a picture of your screen and post it here.
You also might want to consider 1) unlocking your bootloader then 2) installing a custom recovery then 3) installing the custom kernel by DooMLoRD. I suspect this will give you a better performing kernel and working wifi.
[Guide] How to Unlock & ByPass a Pattern Lock on Android Device Without Loosing Data
So you are here cuz you probably have had set a Pattern lock on your android device, and baaah BAD LUCK you forgot the the pattern. So just rather than getting a whole factory reset of your devise we have a very easy and nice tutorial to get your Phone unlocked while not even loosing a single contact out of your Phone.
Well many other are here cuz they want to spy on a friends android device but damn th patternlock is not letting them. So chill out and Spy tight as we have a set of instruction and a very nice post on Unlocking a Friends android Pattern lock.
Hello friends today we are here to help you about how to bypass the pattern lock on an android device. Have you sometime suffered with Locked out? Do you know how to bypass the patternlock? Did you try it out on your own anytime?
Pattern lock on an android device provides users a great security which further prevents your smartphone with any accidental taps like theft or misuse. If a user wants to use this security feature on their android device then they have to customize it under the settings option in menu.
It happens that sometimes users forget the pattern of lock of their devices and in panic they start guessing the pattern and finally comes with a problem of locked out. Users and dear users don’t be so panic as if is facing any problem there is a definite solution to that problem as well. If you face a locked out then you can bypass the pattern lock.
There is very commonly used method to bypass android pattern lock which you have forgotten bu that will for sure make you loose all your data and all your contacts and everything. in other words it will make the phone a device the same as your bought with everything wiped off including all applications. This can be dony by going into the recovery mode of any android device. and then select factory reset option. This is not recommended as for 2 reasons, first, It will clear all your data, second, we have a better option left with us !
You don’t know how to bypass the pattern lock. No worries at all. We will help you out and you just need to follow some ADB commands and then you can finally bypass the pattern lock on an android device. Just go through the following guide tutorial very carefully step-by-step so as to bypass the pattern lock.
SOME BASIC STEPS BEFORE YOU BEGIN Unlock & ByPass a Pattern Lock on an Android Device Without Loosing Data
The very first and important need is the ADB drivers that must be installed in your PC.
Then it is really important that the USB debugging must be enabled before your device being locked.
You should be very carefull while installing the drivers of your device. This technique will not work without installing the specific drivers.
Users might feel really annoyed and irritated when they tried the pattern lock several times in panic and unfortunately their android smartphone displayed locked out. Further users cannot access their android smartphone and at last need to bypass the pattern lock.
HOW TO BYPASS THE PATTERN LOCK ON AN ANDROID DEVICE
Just Follow the easy tutorial to Unlock an android’s pattern lock without factory reset after when you have forgotten it. And yes its that easy as it sounds.
Users need to connect their android device via USB cable to PC.
You must now open the folder where you installed ADB driver.
Now you just have to click right on the screen’s blank area along with hold the shift key and select “OPEN COMMAND WINDOW”.
A window command will prompt and then you just need to type the following:
adb shell
cd /data/data/com.android.providers.settings/databases
sqlite3 settings.db
update system set value=0 where name='lock_pattern_autolock';
update system set value=0 where name='lockscreen.lockedoutpermanently';
.quit
Once it has been done then you have to reboot your android device.
Now it is all done and set.
After following this guide tutorial now you can access your android device as the pattern lockhas been completely disabled.
There is another method not to bypass the lock pattern on and android device but to get your device being unlocked. It is through G MAIL. When you face problem of locked out just click on forgot pattern and follow the basic instructions that follow.
If this guide tutorial really helped you out then please share your experiences with us. And if still any problem persists you can ask for our help and we are there to help you out.
That was it now you can easily unlock any of your friends Phone without even letting him know and making use of it for your propose. But ill not recommend this as the so called friend of yours may punch punch back in your face.
So anything not working with the post or anything you are confused with, just let us know in the comment section below or contact us from the top menu.
Should we type it just as you mentioned or there is something about the spaces or should It be typed like a paragraph as you mentioned