Hangs at htc screen - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Pls help, i have succesful flash my bricked phone with original rom via sd but hangs on at htc screen, when connected to pc there is charging light, i already hardreset, reset several times but still no good

which rom did you flash?
do you see the RGD info on screen when it hangs?

i hardreset it several times, the restore is very quick, unit reset, upon start hangs at htc logo white screen with black lines on whole screen, no RGD

wtanph said:
i hardreset it several times, the restore is very quick, unit reset, upon start hangs at htc logo white screen with black lines on whole screen, no RGD
Click to expand...
Click to collapse
This is like the second or third phone in the past couple of days here, that have had the same problem, WTH ...
I have no input on it , just an observation ....

watcher64 said:
This is like the second or third phone in the past couple of days here, that have had the same problem, WTH ...
I have no input on it , just an observation ....
Click to expand...
Click to collapse
Yes. Very succinct observation. Which ROM were you flashing mate. Is this something to do with that ROM's components? BTW, have you run Task29? See if that helps. Did you try to flash stock ROM?

check my sig, make sure you have followed all flashing steps

Flash a new Radio, and run Task29.

im in the same boat as the OP..mine will flash stock from the sd card, i can hspl, flash radios and roms no prob but everytime it shows the white htc screen and hangs never showing any r g d info. im at a loss as well. mines a telstra and at the moment its got a stock telstra on it..im really at a loss. any help would be appreciated, ive tried a helluva lot of roms and radios with no luck. dunno if itll help, but it goes into bootloader perfectly, flashes roms and radios perfectly from computer and i can flash stock roms on the sd just fine...just hangs on white htc screen.

k so now its got the 2.08 hspl on it, so i tried a telstra stock from sd and this is the error im getting now
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - FAIL
So definately failing at the radio, and if theres no radio there is no boot..correct me if im wrong tho. so i would assume the first thing the hd2 does when booting is run through the radio program. when i get a good radio or shipped rom with radio flash it still hangs. so is it possible myself, the op and anyone else having this issue is having a hardware problem with our radio? just a thought, and maybe someone who knows could chime in

i had tried again, hardreset, leave it for awhile, it hangs at htc screen, i remove the battery, now its dead, not charging anymore and no bootloader, haayyy bad day

the-wrangler said:
so i tried a telstra stock from sd
Click to expand...
Click to collapse
you know doing that has removed hspl, right? even though the flash failed?

samsamuel said:
you know doing that has removed hspl, right? even though the flash failed?
Click to expand...
Click to collapse
sometimes it does, sometimes it doesnt. the last time no it still had a 2.08.hspl on it.

the-wrangler said:
sometimes it does, sometimes it doesnt. the last time no it still had a 2.08.hspl on it.
Click to expand...
Click to collapse
ah ok, so long as you are aware. sorry i cant actually help.

no worries bud, i appreciate any and all ideas at this point

Hi,
I'm also having same problem.
The funny this is; RUU cannot identify my ROm installed.
Check the attachment pls.

mtarimci said:
Hi,
I'm also having same problem.
The funny this is; RUU cannot identify my ROm installed.
Check the attachment pls.
Click to expand...
Click to collapse
thats normal if youre flashing from boot loader..are you putting the phone in bootloader first? if so just hit next and itll work mate. but if youre flashing from activesync, from the rare few times i did i do recall it had the rom info there. does it not flash when you hit next?

the-wrangler said:
thats normal if youre flashing from boot loader..are you putting the phone in bootloader first? if so just hit next and itll work mate. but if youre flashing from activesync, from the rare few times i did i do recall it had the rom info there. does it not flash when you hit next?
Click to expand...
Click to collapse
I'm installing from bootloader. Because I have to I tried lots of RAdio Roms Custom Roms, official roms but can't make the phone boot...

mtarimci said:
I'm installing from bootloader. Because I have to I tried lots of RAdio Roms Custom Roms, official roms but can't make the phone boot...
Click to expand...
Click to collapse
if it flashes ok, and hangs at the white htc screen then youre in the same boat as me..ive tried everything i know and can think of and i dont think its a common problem so not many are sure what to do..im gonna call htc and see about a replacement but not sure how itll work as im in canada and its an australian telstra hd2. the fella i got it from is a mate an tryin to find the receipt so if he doesnt im hoping that seeing as the model is under a year old it wont be a problem. in the mean time i hope someone can think of somethin lol..maybe someone whos dealt with htc like this can chime in..

Had the same problem here. Just sent the phone on for a service today. After a week of trying diffrent things.

Eggy88 said:
Had the same problem here. Just sent the phone on for a service today. After a week of trying diffrent things.
Click to expand...
Click to collapse
ah k thanks for the heads up mate, lookin like thats what ill hafta do then

Related

truble in updating to a new rom

Hello guys, i own a stock vodafone TP. I've tried several rom updates however all of them stuck at the beginning where it shows the % bar, it starts and stuck at 0 %.
the latest rom i've tried was "EnergyROM 2.0 40509" i did it through the "EnergyROM Upgrade.exe".
is there anything i'm missing here??
help me please..
if u can extract the *.nbh file (assuming it is inside the EnergyROM Upgrade.exe), then u can try flash using microSD. And u should post in EnergyROM thread.
krot84 said:
Hello guys, i own a stock vodafone TP. I've tried several rom updates however all of them stuck at the beginning where it shows the % bar, it starts and stuck at 0 %.
the latest rom i've tried was "EnergyROM 2.0 40509" i did it through the "EnergyROM Upgrade.exe".
is there anything i'm missing here??
help me please..
Click to expand...
Click to collapse
Hard SPL maybe
Shazad.K said:
Hard SPL maybe
Click to expand...
Click to collapse
Oh yeah, he said he did several rom updates but didnt mention custom or stock rom
monx® said:
Oh yeah, he said he did several rom updates but didnt mention custom or stock rom
Click to expand...
Click to collapse
indeed they were custom rom
ok i'll try the flash trough my SDHC. hopefully
krot84 said:
indeed they were custom rom
ok i'll try the flash trough my SDHC. hopefully
Click to expand...
Click to collapse
if i am reading your post correctly, you've never been able to flash a custom rom. If this is the case, have you "hard spl" your phone as yet?
Yes you're right. maybe i mixed up with the whole process of the hard spl even though i had read the guide several times .
First HSPL your phone...
Then Flash the ROM of your choice...
And READ, READ, READ, READ a lot, before...
thanks man!!! i'll try
pbmestre said:
First HSPL your phone...
Then Flash the ROM of your choice...
And READ, READ, READ, READ a lot, before...
Click to expand...
Click to collapse
So i have tried to Hspl my phone using http://forum.xda-developers.com/showthread.php?t=448008 guide, but no luck.
first i tried to run the RaphaelHardSPL-Unsigned_190_1_3.exe but it said that there was an error, then i used the SSPLManual.exe the phone turned black and an icon appeared on my pc's task bar saying there's a new "something" - (can't remember the actual name) found. And that was it.
what should i do next because i saw at the bootloader that the spl remained the same..
krot84 said:
So i have tried to Hspl my phone using http://forum.xda-developers.com/showthread.php?t=448008 guide, but no luck.
first i tried to run the RaphaelHardSPL-Unsigned_190_1_3.exe but it said that there was an error, then i used the SSPLManual.exe the phone turned black and an icon appeared on my pc's task bar saying there's a new "something" - (can't remember the actual name) found. And that was it.
what should i do next because i saw at the bootloader that the spl remained the same..
Click to expand...
Click to collapse
leave the phone plugged in when it says installing "something." even if it takes 5 minutes...let it sit until the computer installs the driver.
then run the spl again. this happens to me every now and then. just give it time to install the driver.
you ment to run the RaphaelHardSPL-Unsigned_190_1_3.exe from my computer ??
yes...
it needs to install the driver for flashing the device.. on the pc.. when it done the hardwarewizard tell you that it works.. after that start the hardspl prog
thanks, i'll give it a try later on this day 'cause i'm at work now
that would be the best option
i doubt ur systemcommander let you install anything like drivers and tools to withstand his authority lol
LOL i don't think anybody minds what i do on my computer here at work..
then whats the wait ? hehe
mmm the data cable i guess... don't have it here
lmao
oke oke u got me there
(they're like 3 bucks in most local stores (not that im an addict or anything (a)))
not at all )
by the way, i've tried yesterday to do exactly as you told but no luck.
after i used the SSPLManual and pressed the RaphaelHardSPL-Unsigned_190_1_3.exe it said " error - there's a problem operating or something like that"

[HELP] HD2 stuck on boot screen after HSPL & Flashing ROM (im not a noob)

hello i just got my HD2 from tmobile (a refurbished one of course) my old htc hd2 screen stoped working idk why, my problem now with this one is that i ran HSPL it had SPL 2.10 i used the HSPL to go on 2.08 everything went well, then i installed energy rom, it flashed everything ok on reboot. it got stuck on the boot screen (NRGZ new boot screen" it stayed der for mintues nothing happend not even the red writing on the bottom came up, i flashed stock rom did the same, after a hard reset it went through after using for 10min it froze! so i flashed stock rom again. HSPL back to 2.10 and phone booted fine didnt freez or anything i rebooted and did the same got stuck ok "stick together" so i cannot install no custom rom, i also did task 29 and tried different radios but no luck... i tryed my old hd2 and flashing went great it went through all the setup and bootscreen...can someone tell me if the HD2 or am i doing something wrong? im returning it for a new to see. please help thanks in advance!!
P.S if i still cant find a solution i will do a video to share with you guys and see what i am doing wrong.
s3baz10 said:
hello i just got my hd2 from tmobile (a refurbished one of course) my old htc hd2 screen stoped working idk why, my problem now with this one is that i ran hspl it had spl 2.10 i used the hspl to go on 2.08 everything went well, then i installed energy rom, it flashed everything ok on reboot. It got stuck on the boot screen (nrgz new boot screen" it stayed der for mintues nothing happend not even the red writing on the bottom came up, i flashed stock rom did the same, after a hard reset it went through after using for 10min it froze! So i flashed stock rom again. Hspl back to 2.10 and phone booted fine didnt freez or anything i rebooted and did the same got stuck ok "stick together" so i cannot install no custom rom, i also did task 29 and tried different radios but no luck... I tryed my old hd2 and flashing went great it went through all the setup and bootscreen...can someone tell me if the hd2 or am i doing something wrong? Im returning it for a new to see. Please help thanks in advance!!
Click to expand...
Click to collapse
before installing rom you should have installed the radio then rom of your choice, i would recommend kumar's premium or energy latest?
or restore it to stock rom.. rename the .ngh to leoimg.nbh and put on sd card then get into bootloader it should pickup and start.?
netvpn7 said:
before installing rom you should have installed the radio then rom of your choice, i would recommend kumar's premium or energy latest?
or restore it to stock rom.. rename the .ngh to leoimg.nbh and put on sd card then get into bootloader it should pickup and start.?
Click to expand...
Click to collapse
so first hspl then radio then rom correct? nd yes im a nrgz fan =]
hey buddy, do this.
Download stock leo rom. rename the ruu.nbh file to leoimg.nbh and then put that on your SD card. Place the card in your phone and go into bootloader and follow onscreen instructions to restore that rom. This will remove hardspl and flash stock.
After this and first boot.
Download hardspl, follow instructions and flash that, then after you have hardspl again try flashing the rom you like.
Lemme know if you need more help.
joshkoss said:
hey buddy, do this.
Download stock leo rom. rename the ruu.nbh file to leoimg.nbh and then put that on your SD card. Place the card in your phone and go into bootloader and follow onscreen instructions to restore that rom. This will remove hardspl and flash stock.
After this and first boot.
Download hardspl, follow instructions and flash that, then after you have hardspl again try flashing the rom you like.
Lemme know if you need more help.
Click to expand...
Click to collapse
hey yes ive done this about 3 times, i downloaded the official leo stock from the tmobile page ,renamed it to leoimg i put everything back to stock, hspl to 2.08 and then flashed a rom but no luck still happening... thanks.
you have anymore advice/tips/solutions?
S3BAZ10 said:
hey yes ive done this about 3 times, i downloaded the official leo stock from the tmobile page ,renamed it to leoimg i put everything back to stock, hspl to 2.08 and then flashed a rom but no luck still happening... thanks.
you have anymore advice/tips/solutions?
Click to expand...
Click to collapse
Do you let it sit at the rom name screen after you flash a rom, somtimes depending on the base the chef used it can take about 3 mins to boot from there.
joshkoss said:
Do you let it sit at the rom name screen after you flash a rom, somtimes depending on the base the chef used it can take about 3 mins to boot from there.
Click to expand...
Click to collapse
yes sir, after i flash i go into NRGZ new bootscreen screen it stays der for about 5 min usually after 10-20 sec the red letters on the bottom come up but they dont it just stays on the bootscreen for ages. but im really confuse because sometimes it will work fine then i would restart the phone and then it does that it just stays on bootscreen.
S3BAZ10 said:
yes sir, after i flash i go into NRGZ new bootscreen screen it stays der for about 5 min usually after 10-20 sec the red letters on the bottom come up but they dont it just stays on the bootscreen for ages. but im really confuse because sometimes it will work fine then i would restart the phone and then it does that it just stays on bootscreen.
Click to expand...
Click to collapse
thats very odd. i would try doing a task 29 also. i'm not sure what else to try, you have tried just about everything in the book.
Maybe leave unplugged for a little while. see if it helps.
joshkoss said:
thats very odd. i would try doing a task 29 also. i'm not sure what else to try, you have tried just about everything in the book.
Maybe leave unplugged for a little while. see if it helps.
Click to expand...
Click to collapse
yeah i dont know whats going on.. =/. so should i flash all back to stock? then hspl again to 2.08 task 29 and then flash a rom?
oh i have left unplugged for a day and still nothing..
S3BAZ10 said:
yeah i dont know whats going on.. =/. so should i flash all back to stock? then hspl again to 2.08 task 29 and then flash a rom?
oh i have left unplugged for a day and still nothing..
Click to expand...
Click to collapse
yes i would try that.
joshkoss said:
yes i would try that.
Click to expand...
Click to collapse
alright thanks alot for your help, i hope it works, im still waiting on my other exchange hd2 to see if its this phone or just me?
Anytime dude! Hope it works for ya.
posted via xda app on my hd2
joshkoss said:
Anytime dude! Hope it works for ya.
posted via xda app on my hd2
Click to expand...
Click to collapse
thanks, but no luck =/
S3BAZ10 said:
so first hspl then radio then rom correct? nd yes im a nrgz fan =]
Click to expand...
Click to collapse
Yes......
S3BAZ10 said:
yes sir, after i flash i go into NRGZ new bootscreen screen it stays der for about 5 min usually after 10-20 sec the red letters on the bottom come up but they dont it just stays on the bootscreen for ages. but im really confuse because sometimes it will work fine then i would restart the phone and then it does that it just stays on bootscreen.
Click to expand...
Click to collapse
I have the same problem, so I unplug battery for 5 minutes and reboot without sim card, it boots successfully, I turn of 3G and insert sim card, it ok but I can't use 3G, I have found many the same flied of T-mobile on the world
forever7040 said:
I have the same problem, so I unplug battery for 5 minutes and reboot without sim card, it boots successfully, I turn of 3G and insert sim card, it ok but I can't use 3G, I have found many the same flied of T-mobile on the world
Click to expand...
Click to collapse
but y? my old leo worked fine without these issues!?
Plzzzzz Helppp
thats cool ur expanation but my Pc doesnt recognize my phone
S3BAZ10 said:
thanks, but no luck =/
Click to expand...
Click to collapse
you said you tried stock rom right but how it works is it work flawless???
one more thing abt custom roms that it should support hd2 tmous as well coz hd2 tmous and hd2 from other regions have slightly diff hardware configs like hd2 tmous have 1g ram while others have 512
one more thing did you try custom rom with latest radio????

[Q] I have a problem - phone shows tri-color-screen with ruunbh after flashing

hello together,
i have been reading a lot in this forum but i did not find a solution. This is my problem:
My HTC TD2 shows a pixel error, therefor i should sent it back to the provider. Because i have had ERG-ROM with hard-spl on the phone i have tried flashing first sspl. After that i have tried to flash the original HTC-ROM, but at 9% it fails.
After the recovery the device boots to this 9%-Screen and that´s all. If i am booting to the bootloader, the Bootloader-Modus (Tricolour-Screen) appears, but in the upper right corner stands:"ruunbh"
What can i do next?
schHTC said:
hello together,
i have been reading a lot in this forum but i did not find a solution. This is my problem:
My HTC TD2 shows a pixel error, therefor i should sent it back to the provider. Because i have had ERG-ROM with hard-spl on the phone i have tried flashing first sspl. After that i have tried to flash the original HTC-ROM, but at 9% it fails.
After the recovery the device boots to this 9%-Screen and that´s all. If i am booting to the bootloader, the Bootloader-Modus (Tricolour-Screen) appears, but in the upper right corner stands:"ruunbh"
What can i do next?
Click to expand...
Click to collapse
well, it has stock SPL now, yes? the custom OS is also erased by now... if not, then do a task 29 to make sure it is erased.
and then you can send the phone back no problem.
PS: I pressed thanks accidentally heh.
actually you should first flash the stock rom and then flash back the stock SPL (that's what i did, at least).
so, my advise would be to install the HARDSPL, then flash the stock rom and finally flash the stock SPL. this worked for me
good luck
cmonex said:
well, it has stock SPL now, yes? the custom OS is also erased by now... if not, then do a task 29 to make sure it is erased.
and then you can send the phone back no problem.
PS: I pressed thanks accidentally heh.
Click to expand...
Click to collapse
cmonex, do you think that a phone without any OS/ROM will not be suspicious?
tuniel said:
cmonex, do you think that a phone without any OS/ROM will not be suspicious?
Click to expand...
Click to collapse
afaik, as long as SPL is stock it should be okay... better than if it was booting to a cooked rom.
OP did have the original shipped ROM for the device, it seems. so he can say it got stuck when flashing, which is true.
cmonex said:
well, it has stock SPL now, yes? the custom OS is also erased by now... if not, then do a task 29 to make sure it is erased.
and then you can send the phone back no problem.
PS: I pressed thanks accidentally heh.
Click to expand...
Click to collapse
Can you explain to me please, I have this same problem, I tried the ROM update and it failed also to 9% and is now just the home screen, I need the steps to recover the phone, thanks.
oSanto- said:
Can you explain to me please, I have this same problem, I tried the ROM update and it failed also to 9% and is now just the home screen, I need the steps to recover the phone, thanks.
Click to expand...
Click to collapse
SPL version?
which ROM did you try?

First Time I've had this problem....help

i'm having some strange issues that I've never really had before. The phone is stuck in 3G for some reason....and the SD card isn't mounting automatically. i just got done relocking the phone and flashing an RUU and I think that changed something at a deep level that I changed for the better at one time or another....cause I used to flash any rom under the sun and NEVER have an issue whatsoever. Its on the 2.25HBOOT and just a stock RUU for now...
I'm about to unlock it and and put a recovery on it and start modding it again...but don't want to go do all that and not have the 4G or SDcard working after. I know about the Old firmware patch and I did not have to use that before. Its just confusing to me.
Also I am S-OFF....ideas?
Justin
Did you flash the ruu twice? Everything doesnt stick sometimes if u flash once.
Sent from my ADR6425LVW using Tapatalk 2
Geerboy said:
i'm having some strange issues that I've never really had before. The phone is stuck in 3G for some reason....and the SD card isn't mounting automatically. i just got done relocking the phone and flashing an RUU and I think that changed something at a deep level that I changed for the better at one time or another....cause I used to flash any rom under the sun and NEVER have an issue whatsoever. Its on the 2.25HBOOT and just a stock RUU for now...
I'm about to unlock it and and put a recovery on it and start modding it again...but don't want to go do all that and not have the 4G or SDcard working after. I know about the Old firmware patch and I did not have to use that before. Its just confusing to me.
Also I am S-OFF....ideas?
Justin
Click to expand...
Click to collapse
Flash to the stock recovery and do a factory reset in hboot. That will solve the issue
Geerboy said:
i'm having some strange issues that I've never really had before. The phone is stuck in 3G for some reason....and the SD card isn't mounting automatically. i just got done relocking the phone and flashing an RUU and I think that changed something at a deep level that I changed for the better at one time or another....cause I used to flash any rom under the sun and NEVER have an issue whatsoever. Its on the 2.25HBOOT and just a stock RUU for now...
I'm about to unlock it and and put a recovery on it and start modding it again...but don't want to go do all that and not have the 4G or SDcard working after. I know about the Old firmware patch and I did not have to use that before. Its just confusing to me.
Also I am S-OFF....ideas?
Justin
Click to expand...
Click to collapse
Yes what they said...although I'm not a big believer in routine double flashing....uh...exactly what RUU did you flash?
topgun1953 said:
Yes what they said...although I'm not a big believer in routine double flashing....uh...exactly what RUU did you flash?
Click to expand...
Click to collapse
actually when i flashed a RUU.. the first pass only had a couple of chechmarks and you could totally tell it didnt fully install everything because there were alot that it skipped/ not checked. 2nd passthrough it was fully checked off on what it was trying to install.
funnyangrykid said:
actually when i flashed a RUU.. the first pass only had a couple of chechmarks and you could totally tell it didnt fully install everything because there were alot that it skipped/ not checked. 2nd passthrough it was fully checked off on what it was trying to install.
Click to expand...
Click to collapse
yeah, I think it flashes the hboot first and then reboots itself to do the rest. This is not the same as flashing the whole thing twice.:good:

Well that was dumb, formatted ATT HTC One M7 now its bricked

Just lets start with yes I should have known better, yes I did not look before I leaped, yes I am an idiot.
Long story short I formatted the phone with TWRP, and now all it does as show the HTC logo when I turn it on. Can't connect to my PC, can't do anything with it at all. I just wanted to wipe the phone so I can sell it and I went a bit too far.
Is it a brick? Can I recover this thing somehow?
EDIT: BTW I can't turn it off either, its just stuck on a white screen with a HTC logo.
OK after some torture i got it into the bootloader. Need to charge it a bit before I can reload the base RUU. This should work, but will post again if it doesn't, thanks anyway....
so what happened
Rogue Leader said:
OK after some torture i got it into the bootloader. Need to charge it a bit before I can reload the base RUU. This should work, but will post again if it doesn't, thanks anyway....
Click to expand...
Click to collapse
im in need of some help myself. only bootloader available. cant factory reset cant flash into stock recovery it will send me to a red triangle. tried some ruu but dont know which one
Vega said:
im in need of some help myself. only bootloader available. cant factory reset cant flash into stock recovery it will send me to a red triangle. tried some ruu but dont know which one
Click to expand...
Click to collapse
I got mine working using the .RUU that corresponded with the last version I had installed. That got it going

Categories

Resources