Hello guys, i own a stock vodafone TP. I've tried several rom updates however all of them stuck at the beginning where it shows the % bar, it starts and stuck at 0 %.
the latest rom i've tried was "EnergyROM 2.0 40509" i did it through the "EnergyROM Upgrade.exe".
is there anything i'm missing here??
help me please..
if u can extract the *.nbh file (assuming it is inside the EnergyROM Upgrade.exe), then u can try flash using microSD. And u should post in EnergyROM thread.
krot84 said:
Hello guys, i own a stock vodafone TP. I've tried several rom updates however all of them stuck at the beginning where it shows the % bar, it starts and stuck at 0 %.
the latest rom i've tried was "EnergyROM 2.0 40509" i did it through the "EnergyROM Upgrade.exe".
is there anything i'm missing here??
help me please..
Click to expand...
Click to collapse
Hard SPL maybe
Shazad.K said:
Hard SPL maybe
Click to expand...
Click to collapse
Oh yeah, he said he did several rom updates but didnt mention custom or stock rom
monx® said:
Oh yeah, he said he did several rom updates but didnt mention custom or stock rom
Click to expand...
Click to collapse
indeed they were custom rom
ok i'll try the flash trough my SDHC. hopefully
krot84 said:
indeed they were custom rom
ok i'll try the flash trough my SDHC. hopefully
Click to expand...
Click to collapse
if i am reading your post correctly, you've never been able to flash a custom rom. If this is the case, have you "hard spl" your phone as yet?
Yes you're right. maybe i mixed up with the whole process of the hard spl even though i had read the guide several times .
First HSPL your phone...
Then Flash the ROM of your choice...
And READ, READ, READ, READ a lot, before...
thanks man!!! i'll try
pbmestre said:
First HSPL your phone...
Then Flash the ROM of your choice...
And READ, READ, READ, READ a lot, before...
Click to expand...
Click to collapse
So i have tried to Hspl my phone using http://forum.xda-developers.com/showthread.php?t=448008 guide, but no luck.
first i tried to run the RaphaelHardSPL-Unsigned_190_1_3.exe but it said that there was an error, then i used the SSPLManual.exe the phone turned black and an icon appeared on my pc's task bar saying there's a new "something" - (can't remember the actual name) found. And that was it.
what should i do next because i saw at the bootloader that the spl remained the same..
krot84 said:
So i have tried to Hspl my phone using http://forum.xda-developers.com/showthread.php?t=448008 guide, but no luck.
first i tried to run the RaphaelHardSPL-Unsigned_190_1_3.exe but it said that there was an error, then i used the SSPLManual.exe the phone turned black and an icon appeared on my pc's task bar saying there's a new "something" - (can't remember the actual name) found. And that was it.
what should i do next because i saw at the bootloader that the spl remained the same..
Click to expand...
Click to collapse
leave the phone plugged in when it says installing "something." even if it takes 5 minutes...let it sit until the computer installs the driver.
then run the spl again. this happens to me every now and then. just give it time to install the driver.
you ment to run the RaphaelHardSPL-Unsigned_190_1_3.exe from my computer ??
yes...
it needs to install the driver for flashing the device.. on the pc.. when it done the hardwarewizard tell you that it works.. after that start the hardspl prog
thanks, i'll give it a try later on this day 'cause i'm at work now
that would be the best option
i doubt ur systemcommander let you install anything like drivers and tools to withstand his authority lol
LOL i don't think anybody minds what i do on my computer here at work..
then whats the wait ? hehe
mmm the data cable i guess... don't have it here
lmao
oke oke u got me there
(they're like 3 bucks in most local stores (not that im an addict or anything (a)))
not at all )
by the way, i've tried yesterday to do exactly as you told but no luck.
after i used the SSPLManual and pressed the RaphaelHardSPL-Unsigned_190_1_3.exe it said " error - there's a problem operating or something like that"
Related
Hi.
During upgrade to Crystal V3, I get this error at the end:
Please look at attached image...
Anyone knows what the fault is?
PS. This is the new Prophet that I got as a replacement for the old, bricked one...
Regards.
Try to move the install folder to C:/
I'm not sure if it is the same error message, but months ago I had the same prob and after this it worked.
Good luck
Tried, no luck...
hifiasylum said:
Tried, no luck...
Click to expand...
Click to collapse
reset phone and restart PC.. after that install aku 2.2 and retry..
Done, no luck...
Will try with another PC. Maybe this phone is locked?
Will go on a search in the forum later tonight.
Thanks for all help.
Will make it in the end!
Regards, Lars
hifiasylum said:
Done, no luck...
Will try with another PC. Maybe this phone is locked?
Will go on a search in the forum later tonight.
Thanks for all help.
Will make it in the end!
Regards, Lars
Click to expand...
Click to collapse
In the WM6 install folder ou will find 2 .cab files.
Bring them to the mobile and install them.
After that try again.
Should work.
Did you perform step1 before running Crystal upgrade?
I had the same problem... It worked successfully on a different computer.
panda88 said:
Did you perform step1 before running Crystal upgrade?
Click to expand...
Click to collapse
Yes, I allways downgrade before I upgrade.
Really, I do.
l3v5y said:
I had the same problem... It worked successfully on a different computer.
Click to expand...
Click to collapse
I have now tried 6 different computers, no luck. Believe that the fault is that I must unlock the phone or something. Donno, maybe the easiest thing is to sell the whole phone and get one a little more "programming friendly"?
dkleuven said:
In the WM6 install folder ou will find 2 .cab files.
Bring them to the mobile and install them.
After that try again.
Should work.
Click to expand...
Click to collapse
You dont think this will in some way or the other f_ _k up my Prophet?
hifiasylum said:
You dont think this will in some way or the other f_ _k up my Prophet?
Click to expand...
Click to collapse
It shouln't!
I saw from one of the thread, somebody also has the same exact problem, this is caused by the path is too long. It is suggested to put it in C:\, which you said you have done. The other person reported that it's working after he moved the installation file. I dun understand why it wouldn't work with yours.
Here is the post, finally found it:
http://forum.xda-developers.com/showthread.php?p=1549150#post1549150
User reported the problem was solved in #318
did u unlock CID yet?
Hi again. Found the problem. It seems that I was using a somewhat corrupt downloaded rom. The rom was ok, but it must have been destroyed during the downloadprocess.
Now the phone has Gullum Touch IX installed and works like a charm.
Thank for all your help, great forum!
Regards, Lars
818pro problem during upgrade to wm6
hai..
during upgrade my dopod 818pro to wm6, suddenly blackout and my upgrading was disrupted.. i reset back my dopod 818pro to continue back my upgrading..
but, I'm facing a problem which it's just hanging at start up screen..
i already try hard reset many time, but still can't to operate..
i just want to synchronize back to my pc to continue back my upgrading...
could somebody help me to this matter.. i don't know what to do now..
if it can enter bootloader, check the wiki for recovery, and follow it through.
I have a Hermes, with the pin of the USB that makes connection to PC broken... So my only shot to update the ppc is from SD.
The rom i have is one of the 1st realeses of hermes wm6.5, so that stucks all the time, even i hard reset it...
When i try to update something from SD i cant because gives me that error 000602... Any idea? So i have to unlock the cid, but if i cant access to the windows what i must do?
If i hard reset it, it enter in windows, but 2 ou 3 seconds that stuck :S
Please help me, i dont wanna be another one with a bricked pda...
gajodafeira said:
I have a Hermes, with the pin of the USB that makes connection to PC broken... So my only shot to update the ppc is from SD.
The rom i have is one of the 1st realeses of hermes wm6.5, so that stucks all the time, even i hard reset it...
When i try to update something from SD i cant because gives me that error 000602... Any idea? So i have to unlock the cid, but if i cant access to the windows what i must do?
If i hard reset it, it enter in windows, but 2 ou 3 seconds that stuck :S
Please help me, i dont wanna be another one with a bricked pda...
Click to expand...
Click to collapse
Did you install HardSPL before flashing from the SD card?
Shawn80 said:
Did you install HardSPL before flashing from the SD card?
Click to expand...
Click to collapse
Thanks for your reply. Before the instalation of that rom, i have installed 6 or more roms for weeks, without installing HardSPL... Pretty noob, but :S
gajodafeira said:
Thanks for your reply. Before the instalation of that rom, i have installed 6 or more roms for weeks, without installing HardSPL... Pretty noob, but :S
Click to expand...
Click to collapse
Hell bro it's cool. I am still a n00b myself.
But you really needed to install HardSPL before trying to flash any ROM.
I dunno what to do for you bro.
Nevermind I see you have already asked in this threadhttp://forum.xda-developers.com/showthread.php?t=323253&page=2
and it seems that ultramag69 has already answered the question.
Sorry bro this is why you should ALWAYS have HardSPL installed before even attempting to flash a ROM.
Shawn80 said:
Hell bro it's cool. I am still a n00b myself.
But you really needed to install HardSPL before trying to flash any ROM.
I dunno what to do for you bro.
Nevermind I see you have already asked in this threadhttp://forum.xda-developers.com/showthread.php?t=323253&page=2
and it seems that ultramag69 has already answered the question.
Sorry bro this is why you should ALWAYS have HardSPL installed before even attempting to flash a ROM.
Click to expand...
Click to collapse
Lol do you believe that i had 6 PPC and all of them was flashed with new roms, and i NEVER changed the HardSPL with no consequences? I sent the Hermes to a friend. He says that he needs the electronic scheme to do the electronic correction... Do you know where the hell i can find that?
Try searching for JTAG... You might get the info you require...
Pls help, i have succesful flash my bricked phone with original rom via sd but hangs on at htc screen, when connected to pc there is charging light, i already hardreset, reset several times but still no good
which rom did you flash?
do you see the RGD info on screen when it hangs?
i hardreset it several times, the restore is very quick, unit reset, upon start hangs at htc logo white screen with black lines on whole screen, no RGD
wtanph said:
i hardreset it several times, the restore is very quick, unit reset, upon start hangs at htc logo white screen with black lines on whole screen, no RGD
Click to expand...
Click to collapse
This is like the second or third phone in the past couple of days here, that have had the same problem, WTH ...
I have no input on it , just an observation ....
watcher64 said:
This is like the second or third phone in the past couple of days here, that have had the same problem, WTH ...
I have no input on it , just an observation ....
Click to expand...
Click to collapse
Yes. Very succinct observation. Which ROM were you flashing mate. Is this something to do with that ROM's components? BTW, have you run Task29? See if that helps. Did you try to flash stock ROM?
check my sig, make sure you have followed all flashing steps
Flash a new Radio, and run Task29.
im in the same boat as the OP..mine will flash stock from the sd card, i can hspl, flash radios and roms no prob but everytime it shows the white htc screen and hangs never showing any r g d info. im at a loss as well. mines a telstra and at the moment its got a stock telstra on it..im really at a loss. any help would be appreciated, ive tried a helluva lot of roms and radios with no luck. dunno if itll help, but it goes into bootloader perfectly, flashes roms and radios perfectly from computer and i can flash stock roms on the sd just fine...just hangs on white htc screen.
k so now its got the 2.08 hspl on it, so i tried a telstra stock from sd and this is the error im getting now
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - FAIL
So definately failing at the radio, and if theres no radio there is no boot..correct me if im wrong tho. so i would assume the first thing the hd2 does when booting is run through the radio program. when i get a good radio or shipped rom with radio flash it still hangs. so is it possible myself, the op and anyone else having this issue is having a hardware problem with our radio? just a thought, and maybe someone who knows could chime in
i had tried again, hardreset, leave it for awhile, it hangs at htc screen, i remove the battery, now its dead, not charging anymore and no bootloader, haayyy bad day
the-wrangler said:
so i tried a telstra stock from sd
Click to expand...
Click to collapse
you know doing that has removed hspl, right? even though the flash failed?
samsamuel said:
you know doing that has removed hspl, right? even though the flash failed?
Click to expand...
Click to collapse
sometimes it does, sometimes it doesnt. the last time no it still had a 2.08.hspl on it.
the-wrangler said:
sometimes it does, sometimes it doesnt. the last time no it still had a 2.08.hspl on it.
Click to expand...
Click to collapse
ah ok, so long as you are aware. sorry i cant actually help.
no worries bud, i appreciate any and all ideas at this point
Hi,
I'm also having same problem.
The funny this is; RUU cannot identify my ROm installed.
Check the attachment pls.
mtarimci said:
Hi,
I'm also having same problem.
The funny this is; RUU cannot identify my ROm installed.
Check the attachment pls.
Click to expand...
Click to collapse
thats normal if youre flashing from boot loader..are you putting the phone in bootloader first? if so just hit next and itll work mate. but if youre flashing from activesync, from the rare few times i did i do recall it had the rom info there. does it not flash when you hit next?
the-wrangler said:
thats normal if youre flashing from boot loader..are you putting the phone in bootloader first? if so just hit next and itll work mate. but if youre flashing from activesync, from the rare few times i did i do recall it had the rom info there. does it not flash when you hit next?
Click to expand...
Click to collapse
I'm installing from bootloader. Because I have to I tried lots of RAdio Roms Custom Roms, official roms but can't make the phone boot...
mtarimci said:
I'm installing from bootloader. Because I have to I tried lots of RAdio Roms Custom Roms, official roms but can't make the phone boot...
Click to expand...
Click to collapse
if it flashes ok, and hangs at the white htc screen then youre in the same boat as me..ive tried everything i know and can think of and i dont think its a common problem so not many are sure what to do..im gonna call htc and see about a replacement but not sure how itll work as im in canada and its an australian telstra hd2. the fella i got it from is a mate an tryin to find the receipt so if he doesnt im hoping that seeing as the model is under a year old it wont be a problem. in the mean time i hope someone can think of somethin lol..maybe someone whos dealt with htc like this can chime in..
Had the same problem here. Just sent the phone on for a service today. After a week of trying diffrent things.
Eggy88 said:
Had the same problem here. Just sent the phone on for a service today. After a week of trying diffrent things.
Click to expand...
Click to collapse
ah k thanks for the heads up mate, lookin like thats what ill hafta do then
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
A.Calamita said:
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
Click to expand...
Click to collapse
No sir; Stock ROM don't need HSPL, (and certainly not in combination with 3.14 stock ROM)
Error 266 is a connection problem; are you well connected over active sync? did you disconnect AntiVirus temporary?
From where do you get start Home-screen or Boot-screen?
Witch stock rom are you trying to install?
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
A.Calamita said:
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
Click to expand...
Click to collapse
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
kurt-willems said:
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
Click to expand...
Click to collapse
I've tried it from the homescreen (I think) Whats the difference? I plugged in the usb cable and selected activesync mode. Then as it starts to gather information it changes to the bootloader.
I've tried different usb ports. Also tried a hub. I've rebooted my laptop and phone many times.
And I've also tried running as an administrator.
I don't suppose that you can unpack the .exe and transfer it to the memory card and run it from there?
And I don't suppose having HTC Sense disabled would cause any issue.
I could try a hard reset. Although it would restore it (would do once its updated ROM anyway) but I don't want to have to set it all up again if the update doesn't work.
Any more idea's?
Thanks,
Al
Okay; strange.
Try than to flash over SD.
- Take your "RUU_Leo_S_HTC_..." file and extract the "RUU_signed.nbh" file from the ROM, rename it to "leoimg.nbh" without ""
- Place the "leoimg.nbh" on the root of ur SD.
- Reset the device while pressing the volume down button.
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
A.Calamita said:
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
Click to expand...
Click to collapse
PS, don't forget to use a SD < 8 GB (a 2GB SD would be perfect) and format it by FAT32
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Software update failed. Please try again :O
Will it have bricked it?
A.Calamita said:
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Click to expand...
Click to collapse
Because 8GB SD cards or bigger caused problems.
A.Calamita said:
Software update failed. Please try again :O
Will it have bricked it?
Click to expand...
Click to collapse
Did you use a <8GB SD?
when you downloaded the stock ROM from the HTC webpage you used your S/N?
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
A.Calamita said:
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
Click to expand...
Click to collapse
Fine to see it's working now. Have fun.
After having problems with Android NAND i have decided to move back to win mobile 6.5, so i flash back to 3.14.xxx
every time when i turn off and on the phone its do everything that a first time boot do, after ages when the phone finally gets on all the settings are stock,
any solution for this ?
Did you run a Task 29 before flashing the Win Mo ROM?
T-Macgnolia said:
Did you run a Task 29 before flashing the Win Mo ROM?
Click to expand...
Click to collapse
yes, i did
Hmmm what ROM is it? Is it a official or custom ROM?
T-Macgnolia said:
Hmmm what ROM is it? Is it a official or custom ROM?
Click to expand...
Click to collapse
RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
tried another ROM but same results
Gihanfx said:
RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
tried another ROM but same results
Click to expand...
Click to collapse
Ok that is a official ROM. did you get it from HTC.com using your serial number to confirm it is for your HD2? Also have you thought about flashing it via SD card?
Oh and you don't have to hit the thanks button for every reply but thank you for the gesture.
T-Macgnolia said:
Ok that is a official ROM. did you get it from HTC.com using your serial number to comfirm it is for your HD2? Also have you thought about flashing it via SD card?
Click to expand...
Click to collapse
Ill try and it let you know, Thanks a lot
Gihanfx said:
Ill try and it let you know, Thanks a lot
Click to expand...
Click to collapse
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
imanh said:
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
Click to expand...
Click to collapse
Thanks for adding that as I forgot to mention that. But there is very few custom ROMs that do not require HSPL.
T-Macgnolia said:
Thanks for adding that as I forgot to mention that. But there is very few custom ROMs that do not require HSPL.
Click to expand...
Click to collapse
imanh said:
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
Click to expand...
Click to collapse
did everything as in the guide, but still the same problem
Gihanfx said:
did everything as in the guide, but still the same problem
Click to expand...
Click to collapse
The only thing I can think may be causing your issue is if you have a bad block or twoin your NAND memory and it is not letting it save your your information and thefact that it has went through the set up. I would tell you how to check your blocks bit to be honest I really am not sure how you do it.I know you have to use some kind of softwarecto do it with your computer and have your HD2 connected to your computer. Sorry friend, maybe some other members here can help you further.
T-Macgnolia said:
The only thing I can think may be causing your issue is if you have a bad block or twoin your NAND memory and it is not letting it save your your information and thefact that it has went through the set up. I would tell you how to check your blocks bit to be honest I really am not sure how you do it.I know you have to use some kind of softwarecto do it with your computer and have your HD2 connected to your computer. Sorry friend, maybe some other members here can help you further.
Click to expand...
Click to collapse
Thanks again for the Help, after installing the new ROM i got far too many errors, but i restarted the phone so many times and things are back to normal, still when i access google maps the phone restarts and cant access the market place cus the update always fails, i also feel there is something wrong with the memory, anyway thanks again