Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
A.Calamita said:
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
Click to expand...
Click to collapse
No sir; Stock ROM don't need HSPL, (and certainly not in combination with 3.14 stock ROM)
Error 266 is a connection problem; are you well connected over active sync? did you disconnect AntiVirus temporary?
From where do you get start Home-screen or Boot-screen?
Witch stock rom are you trying to install?
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
A.Calamita said:
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
Click to expand...
Click to collapse
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
kurt-willems said:
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
Click to expand...
Click to collapse
I've tried it from the homescreen (I think) Whats the difference? I plugged in the usb cable and selected activesync mode. Then as it starts to gather information it changes to the bootloader.
I've tried different usb ports. Also tried a hub. I've rebooted my laptop and phone many times.
And I've also tried running as an administrator.
I don't suppose that you can unpack the .exe and transfer it to the memory card and run it from there?
And I don't suppose having HTC Sense disabled would cause any issue.
I could try a hard reset. Although it would restore it (would do once its updated ROM anyway) but I don't want to have to set it all up again if the update doesn't work.
Any more idea's?
Thanks,
Al
Okay; strange.
Try than to flash over SD.
- Take your "RUU_Leo_S_HTC_..." file and extract the "RUU_signed.nbh" file from the ROM, rename it to "leoimg.nbh" without ""
- Place the "leoimg.nbh" on the root of ur SD.
- Reset the device while pressing the volume down button.
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
A.Calamita said:
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
Click to expand...
Click to collapse
PS, don't forget to use a SD < 8 GB (a 2GB SD would be perfect) and format it by FAT32
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Software update failed. Please try again :O
Will it have bricked it?
A.Calamita said:
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Click to expand...
Click to collapse
Because 8GB SD cards or bigger caused problems.
A.Calamita said:
Software update failed. Please try again :O
Will it have bricked it?
Click to expand...
Click to collapse
Did you use a <8GB SD?
when you downloaded the stock ROM from the HTC webpage you used your S/N?
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
A.Calamita said:
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
Click to expand...
Click to collapse
Fine to see it's working now. Have fun.
Related
Hi all this is my first post here and I was hoping someone could help me install Villain 2.2 Froyo on my 3UK Hero
If you havn't rooted already then you're gonna need to go down the goldcard route.. which takes a long time and doesn't always work... just make sure you have a kingston sd card.. the one that comes with the hero doesn't always work and didn't for me. There are plenty of guides around for rooting and installing roms. Once you've done rooting follow these rom updates as the coder is very good and updates frequently http://forum.xda-developers.com/showthread.php?t=734149
+1 on the link above. Cronos 2.2 Froyo for GSM hero has been in very active development intensively for a while now and has suddenly gone from being a little unpredictable but showing great promise to being, in my opinion, the best froyo rom for the gsm hero.
I rooted my Hero but when I try and run Titanium Backup it says
"Error-Sorry, I could not acquire root privilages....."
Also when I try and boot into my HTC whilst holding the home key I just get a black screen with an explanation mark inside a triagle ??
Also recovery flash doesnt let me back up it just says
"backup fail: could not run command"
Thread moved to Q&A.
Expiring redirect in place for couple of days.
anon2122 said:
Thread moved to Q&A.
Expiring redirect in place for couple of days.
Click to expand...
Click to collapse
Thanks anon hopefully some nice person will come and solve all my problems now so I can get my Hero updated
Red_Stafford said:
Thanks anon hopefully some nice person will come and solve all my problems now so I can get my Hero updated
Click to expand...
Click to collapse
OK. There's a guide here for if you are on 2.1: http://villainrom.co.uk/viewforum.php?f=110
And if on 1.5: http://villainrom.co.uk/viewtopic.php?f=46&t=375
Rememeber to use the Froyd zip file instead of the Villain 5.5 or whatever the guide suggests.
EDIT: and welcome to xda btw, didn't notice it was your first post
anon2122 said:
Rememeber to use the Froyd zip file instead of the Villain 5.5 or whatever the guide suggests.
EDIT: and welcome to xda btw, didn't notice it was your first post
Click to expand...
Click to collapse
Cheers mate, my Firmware version is 1.5 im thinking about upgrading to Cronos 2.2 Froyo is this better than villians ?
Red_Stafford said:
Cheers mate, my Firmware version is 1.5 im thinking about upgrading to Cronos 2.2 Froyo is this better than villians ?
Click to expand...
Click to collapse
Dunno. I mean, I'm hardly impartial on this one But I certainly know that something is in the works over at TeamVillain that might be interesting
But really this is something to work out for yourself. No one ROM is better than another, except in really amazing circumstances. Some people prefer VR12 since it has Sense, while no Froyo hero ROM has Sense. It's all up to your personal preferences.
anon2122 said:
Dunno. I mean, I'm hardly impartial on this one But I certainly know that something is in the works over at TeamVillain that might be interesting
But really this is something to work out for yourself. No one ROM is better than another, except in really amazing circumstances. Some people prefer VR12 since it has Sense, while no Froyo hero ROM has Sense. It's all up to your personal preferences.
Click to expand...
Click to collapse
Ok I will stick with the Villian one first or is it worth waiting around as you mention above you are working on something new ?
Red_Stafford said:
Ok I will stick with the Villian one first or is it worth waiting around as you mention above you are working on something new ?
Click to expand...
Click to collapse
I don't know when the new one will be ready, so you could try Froyd 1.1.1 for now. The new one will need a full wipe etc, but the current version is perfectly usable, and I've been using it for over a week now.
Run the VillainROM updater once installed, and take the two updates there
anon2122 said:
I don't know when the new one will be ready, so you could try Froyd 1.1.1 for now. The new one will need a full wipe etc, but the current version is perfectly usable, and I've been using it for over a week now.
Run the VillainROM updater once installed, and take the two updates there
Click to expand...
Click to collapse
Is VillainROM updater an app I need to download on my Hero
Also following the above guide
7. Turn the phone on by holding down Home and Power till you get to the custom recovery screen.
I do this and my Hero turns back on but there is just and explanation mark in a triagle ??
Red_Stafford said:
Is VillainROM updater an app I need to download on my Hero
Also following the above guide
7. Turn the phone on by holding down Home and Power till you get to the custom recovery screen.
I do this and my Hero turns back on but there is just and explanation mark in a triagle ??
Click to expand...
Click to collapse
No, the updater is in the ROM. And you should be using the guide for 1.5.
And you need to follow the "GoldCard" Procedure as opposed to the other method.
I did the GoldCard procedure yesterday to root my Hero it was a different guide to the link you posted though.
Also when I try to update my Hero drive on my PC it just says there is a better driver already installed it wont let me change it ?
"GoldCard" Procedure
I. Setting up the SDK
I have done this and got my serial
II. Create a “GoldCard” from a MicroSD Card
is this where I should be starting then and ignore everything above this ?
Also windows will not let me update driver ??
adb shell
cat /sys/class/mmc_host/mmc1/mmc1:*/cid
it says : not found
Red_Stafford said:
adb shell
cat /sys/class/mmc_host/mmc1/mmc1:*/cid
it says : not found
Click to expand...
Click to collapse
would you be using windows 7 by any chance?
akuma24 said:
would you be using windows 7 by any chance?
Click to expand...
Click to collapse
Yes Windows 7 64-bit
I forgot to put the space after cat /sys/class/mmc_host/mmc1/mmc1:*/cid
so I have entered again and put the space but now I get
No such file or directory
am I being really stupid and missisng something ?
I have also tried using the gold card tool but I get errors there too
So I combined the too I got the CID code from the tool then went to the sites stated on the guide and got the other code and downloaded the HEX tool and did what the guide told me and it let me mount the SD card afterwards does that mean it as worked ? because when I click on the titanium backup program it says
Sorry, I could not acquire root privilages
does this mean I have failed, this is getting really annoying ?
Red_Stafford said:
I have also tried using the gold card tool but I get errors there too
So I combined the too I got the CID code from the tool then went to the sites stated on the guide and got the other code and downloaded the HEX tool and did what the guide told me and it let me mount the SD card afterwards does that mean it as worked ? because when I click on the titanium backup program it says
Sorry, I could not acquire root privilages
does this mean I have failed, this is getting really annoying ?
Click to expand...
Click to collapse
Hmmm. When you finished the hex part of the process, did you get it to connect to your PC properly when in the SD card reader, and could you access the drive letter correctly? If not, you didn't do the goldcard right.
Failing that, you could try and install 2.1, although I'm not sure if 3UK have made an OTA available yet for it. Once 2.1 is in, you can use the faster adb method on it
I am unsure as to what you're doing, but once you made the goldcard, did you then flash the RUU as directed in the guide?
anon2122 said:
Hmmm. When you finished the hex part of the process, did you get it to connect to your PC properly when in the SD card reader, and could you access the drive letter correctly? If not, you didn't do the goldcard right.
Click to expand...
Click to collapse
Yes after doing the above I connected the Hero to my PC and it allowed me to access the SD card, I dont have a card reader ?
anon2122 said:
Failing that, you could try and install 2.1, although I'm not sure if 3UK have made an OTA available yet for it. Once 2.1 is in, you can use the faster adb method on it
Click to expand...
Click to collapse
I have tried install 2.1 but I get a Error 170 USB CONNECTION ERROR ?
anon2122 said:
I am unsure as to what you're doing, but once you made the goldcard, did you then flash the RUU as directed in the guide?
Click to expand...
Click to collapse
I have copied FlashRec.apk & AmonRa’s Hero Recovery Image to the root in my SD card but when I try and do a backup its says
Backup FAILED: Could not run command
Can anyone point me in the direction of flashing a ROM with an SD card?
Can this be a custom rom?
I flashed via sync (cable) a zillion times, but latest chuckydroidrom I flashed, my phone can't be recognised anymore, so no active synch. but the phone does work. only I can't sync which is obviously a problem..
can anyone help me?
Thanks for the support
edit: I downloaded an older version of windows mobile device center and that did the trick!
1) Prepares your SD (<8GB SD Card)
a) Format your SD by FAT32
2) Take the "RUU_signed.nbh" from your ship ROM and copy it to the SD card.
3) Rename the "RUU_signed.nbh" to "leoimg.nbh".
4) Reset the device while pressing the volume down button.
5) Follow the instructions on your screen.
thanks kurt
Version of OS: 5.2.21869
Manila: 2.5.19211619.0
ROM: 1.66.404.1 (76641) NLD
RADIO: 2.06.51.07
this was my rom, where can I find this stock rom? And does the install of this rom erases HSPL?
will this one be good: RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Here you have the 1.66 NLD stock ROM and yes, flashing over SD will remove HSPL.
thank you for the advice.
I will wait for the dev and if he answers (I really hope so) to help, and if not this is my only way out. so thanks for your advice kurt! really strange that the phone won't sync.
HectiQ said:
thank you for the advice.
I will wait for the dev and if he answers (I really hope so) to help, and if not this is my only way out. so thanks for your advice kurt! really strange that the phone won't sync.
Click to expand...
Click to collapse
Can you get into Bootloader? if you can, and connect from there to your PC; it will mention "USB" at the bottom. If this is the case you can also flash.
kurt-willems
Can you please tell me,why my hd2,not flashing from SD.J tried billion times,with 8 sd cards.
Boot,shows loading for a millisecond,and boot again.Its brand new phone,last one was same hd2,but none of those problems.
Please help,or any suggestion.
kurt-willems said:
Can you get into Bootloader? if you can, and connect from there to your PC; it will mention "USB" at the bottom. If this is the case you can also flash.
Click to expand...
Click to collapse
yes, I can get into bootloader, but then I get the message that the qualcomm driver is not found, and before it always found it. very strange! and I tried on all my pc's, not one can recognise it
msg: qualcomm cdma technologies msm driver not found.
HectiQ said:
edit: I downloaded an older version of windows mobile device center and that did the trick!
Click to expand...
Click to collapse
Nice to see it's bean solved.
iannius said:
kurt-willems
Can you please tell me,why my hd2,not flashing from SD.J tried billion times,with 8 sd cards.
Boot,shows loading for a millisecond,and boot again.Its brand new phone,last one was same hd2,but none of those problems.
Please help,or any suggestion.
Click to expand...
Click to collapse
Use a smaller SD card. 8GB SD cards caused lot of problems.
OK, I wanted to format the internal storage so I Task 29 it.
It told me to hold the volume down button when it reach 99%
Well it stopped at 96% for a while, so I held the volume button down
Now when I turn on the screen, it just shows the loading screen towards that CleanEx rom and nothing else!!!
Bootloader mode only supports disk drive connection to pc so I don't think that's appropriate.
I need help because I am about to give this phone as a gift
THANK YOU IN ADVANCE
Its um SPL 2.08
HSPLd
CotullaHSPL
for more info
A new hacker said:
Its um SPL 2.08
HSPLd
CotullaHSPL
for more info
Click to expand...
Click to collapse
have you flash a correct radio FIRST??
geppo1975 said:
have you flash a correct radio FIRST??
Click to expand...
Click to collapse
It was flashed before, the correct one IDk.
A new hacker said:
It was flashed before, the correct one IDk.
Click to expand...
Click to collapse
if you're sure to have flashed all properly,than i suggest a new dwld:maybe your file is bad or corrupt?!
geppo1975 said:
if you're sure to have flashed all properly,than i suggest a new dwld:maybe your file is bad or corrupt?!
Click to expand...
Click to collapse
Can you provide assistance with that? That is a new term to me
A new hacker said:
Can you provide assistance with that? That is a new term to me
Click to expand...
Click to collapse
that's mean your file(rom or radio)in download or upload has lost some parts or file!!You can try to dwld from other server or try again from same...sometimes happens
you task29d, do you even know what that means? it means you formatted your phone there is no rom on it, how can it boot with no rom?
enter bootloader, connect usb, (yes bootloader is fine),, flash a rom.
OK, sorry for the fuss. Now it seems that usb is working but when I try to upgrade the Rom (official) the percentage just stays at 0% and gives some error messages. Please help
A new hacker said:
and gives some error messages.
Click to expand...
Click to collapse
aww c'mon, at LEAST tell us the error
It says [connection] cannot establish (I've done all the things listed)
Error [262] thanks for the assistance
A new hacker said:
Error [262] thanks for the assistance
Click to expand...
Click to collapse
- Are you well connected over Active Sync?
- Did you test it on a other USB port?
- Did you temporary deactivated your AntiVirus?
- Try to reset device and pc
- On Windows vista and window 7 don't forget to run RUU_Leo_S_HTC_... as administrator
This are some suggestions that can solved connection problems.
A new hacker said:
Error [262] thanks for the assistance
Click to expand...
Click to collapse
Why not extract the nbh file from the downloaded rom, rename it as required (leoimg.nbh but please check on the site, I'm on my phone so you'll have to do that ) place it on the root of ur SD card, go into bootloader and if you take your fingers off the keys at the right time, the rom will flash directly from there.
I have a MAC and flash via SD card all the time
Sent from my HTC HD2 using XDA App
timmymarsh said:
Why not extract the nbh file from the downloaded rom, rename it as required (leoimg.nbh but please check on the site, I'm on my phone so you'll have to do that ) place it on the root of ur SD card, go into bootloader and if you take your fingers off the keys at the right time, the rom will flash directly from there.
I have a MAC and flash via SD card all the time
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Sorry for the bad news but can you visit this forum? It has more details and updated news. and i like to emphasize that the usb doesn't work, disk drive or activesync
http://forum.xda-developers.com/showthread.php?t=891115
thread closed now redundant, linked thread continues.
After having problems with Android NAND i have decided to move back to win mobile 6.5, so i flash back to 3.14.xxx
every time when i turn off and on the phone its do everything that a first time boot do, after ages when the phone finally gets on all the settings are stock,
any solution for this ?
Did you run a Task 29 before flashing the Win Mo ROM?
T-Macgnolia said:
Did you run a Task 29 before flashing the Win Mo ROM?
Click to expand...
Click to collapse
yes, i did
Hmmm what ROM is it? Is it a official or custom ROM?
T-Macgnolia said:
Hmmm what ROM is it? Is it a official or custom ROM?
Click to expand...
Click to collapse
RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
tried another ROM but same results
Gihanfx said:
RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
tried another ROM but same results
Click to expand...
Click to collapse
Ok that is a official ROM. did you get it from HTC.com using your serial number to confirm it is for your HD2? Also have you thought about flashing it via SD card?
Oh and you don't have to hit the thanks button for every reply but thank you for the gesture.
T-Macgnolia said:
Ok that is a official ROM. did you get it from HTC.com using your serial number to comfirm it is for your HD2? Also have you thought about flashing it via SD card?
Click to expand...
Click to collapse
Ill try and it let you know, Thanks a lot
Gihanfx said:
Ill try and it let you know, Thanks a lot
Click to expand...
Click to collapse
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
imanh said:
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
Click to expand...
Click to collapse
Thanks for adding that as I forgot to mention that. But there is very few custom ROMs that do not require HSPL.
T-Macgnolia said:
Thanks for adding that as I forgot to mention that. But there is very few custom ROMs that do not require HSPL.
Click to expand...
Click to collapse
imanh said:
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
Click to expand...
Click to collapse
did everything as in the guide, but still the same problem
Gihanfx said:
did everything as in the guide, but still the same problem
Click to expand...
Click to collapse
The only thing I can think may be causing your issue is if you have a bad block or twoin your NAND memory and it is not letting it save your your information and thefact that it has went through the set up. I would tell you how to check your blocks bit to be honest I really am not sure how you do it.I know you have to use some kind of softwarecto do it with your computer and have your HD2 connected to your computer. Sorry friend, maybe some other members here can help you further.
T-Macgnolia said:
The only thing I can think may be causing your issue is if you have a bad block or twoin your NAND memory and it is not letting it save your your information and thefact that it has went through the set up. I would tell you how to check your blocks bit to be honest I really am not sure how you do it.I know you have to use some kind of softwarecto do it with your computer and have your HD2 connected to your computer. Sorry friend, maybe some other members here can help you further.
Click to expand...
Click to collapse
Thanks again for the Help, after installing the new ROM i got far too many errors, but i restarted the phone so many times and things are back to normal, still when i access google maps the phone restarts and cant access the market place cus the update always fails, i also feel there is something wrong with the memory, anyway thanks again
hey guys here i have question... how can I roll back to Windows 6.5 from Android 4.0?
I am using t-mobile us version but I m in India and i had unlocked my phone when i had bought it.
Actually the thing is that i want to flash windows 7 on my htc but for that i need to flash w6.5. and seance when i flash Android in htc i m not using windows mobile devise. please anyone can help me out this.
Thanks in Advance.
jitpatel2311 said:
i want to flash windows 7 on my htc but for that i need to flash w6.5.
Click to expand...
Click to collapse
no you dont.
start magldr
select usb flasher
connect usb
run the wp7 install
done.
remember it will wipe your whole sd card, so back up anything you want to keep.
samsamuel said:
no you dont.
start magldr
select usb flasher
connect usb
run the wp7 install
done.
remember it will wipe your whole sd card, so back up anything you want to keep.
Click to expand...
Click to collapse
can you please tell me the link of W7 with market place running. coz i cant find from last 2 days. And one more thing to ask what should I do with micro sd-card(it is currently working for Android). tahnks a ton bro.
Sorry, its been several months since I used wp7. Market just needs a valid activation code to work, doesn't it? I'm sure there are plenty of threads in the wp7 section., , as for the SD card, wp7 will handle that for you, then once its set up you can follow threads in the wp7 section to unlock the card and let you dual boot android from it.(if that's what you mean)
samsamuel said:
Sorry, its been several months since I used wp7. Market just needs a valid activation code to work, doesn't it? I'm sure there are plenty of threads in the wp7 section., , as for the SD card, wp7 will handle that for you, then once its set up you can follow threads in the wp7 section to unlock the card and let you dual boot android from it.(if that's what you mean)
Click to expand...
Click to collapse
thanks for ur guide to it. but let me clarified you that i want to remove Android(totally) from my hd2 and flash wp7. NOT THE DUAL BOOT
So for that i hv to do the same that u explain me before... M I correct?!?!
samsamuel said:
Sorry, its been several months since I used wp7. Market just needs a valid activation code to work, doesn't it? I'm sure there are plenty of threads in the wp7 section.
Click to expand...
Click to collapse
for that which file of rom i hvto download? coz i hv download one of that, its "WinRaR zip" file. for that i dont kn how to flash through bootloader.
try to read here
it works
http://forum.xda-developers.com/showthread.php?t=893948
rottttman said:
try to read here
it works
http://forum.xda-developers.com/showthread.php?t=893948
Click to expand...
Click to collapse
dude i want to flash windows 7. my hd2 is already with Android 4.0. ics.
I repeat,
Into magldr (hold power whilst booting)
Select "USB flasher"
Run the wp7 install.
It will not be a zip file, if you have a zip, then unzip it.
samsamuel said:
I repeat,
Into magldr (hold power whilst booting)
Select "USB flasher"
Run the wp7 install.
It will not be a zip file, if you have a zip, then unzip it.
Click to expand...
Click to collapse
thanks man its working... u r awesome...