Related
Hey, I was just wondering if anyone else is experiencing this?
Well pretty much, I've noticed that the time / clock within the status bar will start to lag behind the actual time of the device. This is more apparent when I'll turn on the screen, and view the lockscreen - the lockscreen clock will display a time that's "Correct" where as the status bar will display something that lags behind. This can range from a few minutes, to hours, in some cases.
For now, I've remedied this by changing the time settings from 12H to 24H and just leaving it there, and when it happens again, 24H to 12H...
Black XS
Unlocked Bootloader
Rooted
Rom: MooDeD ICS 90.6
Kernel: XSX 3.5
I'm not sure if it would be related to the kernel, but I suppose it might be worth taking a look into?
Attached, is a screenshot showcasing what I've just typed up.
Thanks for taking the time to read.
its a issue you can fix it with this tutorial! http://www.youtube.com/watch?v=jDtnkc63RP0
Managed to isolate the problem to being most likely my carrier having a screwed up network time.
Remedy is to use "Built in clock".
Mod's can close this, thanks.
I am noticing some problems with my s3 after the official jellybean update. It feels like it has been rushed to the phone. For example it doesn't have the quick reply feature in the notification window. It does for missed calls but not for messages. This is one the most anticipated features for me. Also when watching you tube and you don't want the screen to rotate it now does. I want to lock the rotation so I only get the small video at the top when my phone is on its side. It worked before jellybean update. Also auto brightness has changed. When auto brightness is selected you can manually turn it up with the slider in the notification window and it disables auto brightness and changes to what you set on the slider. Now on jellybean you have to uncheck the auto brightness box and then slide. Little features like this are starting to make me feel like it has been a massive rush to get jellybean on to the s3 which is ironic seen as though it took long enough. I have the international i9300 model s3. Is anybody else noticing the problems I have stated? Does anybody know a way of changing/getting the features? Thanks.
They were definitely to busy with the Note II, I mean come on at least give their flag ship the same/some of the features that a bigger version of the S3 has... That sexy multitasking should have been on the initial jelly bean update.
94% to 77 % in 7 hours.
WIFI : On , PSM off
Most power and wakelocks were by Kernal.
Normal?
I'm on LJ4, stock kernel?
I've not got a clue what you're on about?
Sent from my GT-I9300 using xda app-developers app
I know what you mean. The note got great features like the multi window. Apparently that's coming before the new year but I highly doubt that. Are you noticing the same problems I am? Another problem I found is when screen goes off after inactivity you used to be able to press the home button a moment after it goes off and it would turn the screen back on leaving you at the page you was. Now the home button takes you back to the home when you press it. It's annoying you have to go back to the app.
Sent from my GT-I9300 using xda app-developers app
eggman89 said:
94% to 77 % in 7 hours.
WIFI : On , PSM off
Most power and wakelocks were by Kernal.
Normal?
I'm on LJ4, stock kernel?
Click to expand...
Click to collapse
Me too, my problem is the battery with jb lj4
I think there is a few little niggles but overal its pretty much the same.
The autobrightness don't disable automatically now when you adjust the slider as you can now actually adjust the autobrightness brightness, Not sure why though.
Google Now - leaving it active at the mo, but not really found any usefullness from it as yet. The Time home feature is ok, would be good if it actually showed the route I take home - Via motorway, rather than the route through city center which i don't take!!
The new notifcation bar - its ok, nothing major. Expect a bit of all these features will improve over time as well once apps get proper updates. Some work but don't have full functionally - Songpop has no notifications now for example.
Battery Life - I did find that my normal phone use on ISC which included about 50/60 mins worth of calls etc wi-fi left on all the time but only actually connected to wi-fi at home (just 2G & 3G at work) i would have about 55/60% battery life left by the time i got home from work, on Jelly Bean - with the same useage i had about 40/45% left. I am now back to the same as before on ISC, but i didn't disable google now or anything just turned Wi-Fi off when left home and turn it back on when home - results was 55/60% battery remaining a as on ISC. Seems that the Wi-Fi drains when not connected - either it keeps on searching which it might not of done on ISC or its the Google Now doing something (Does say improve location by keeping wifi on - does this even if not connected!!) - Least this way i can still use google now and see how it improves its tags overtime.
I am now using a App called WiFi Timer to automatically switch Wifi on and off when i leave/get home.
Love that it now has voice downloaded so you can text etc with no data connection - find its more accurate now as well!
Never had the small vids on Youtube when rotated phone so not sure about that. Take it disabling autorotate doesn't do this?
Good and Bad
My experience is as follows:
Good:
Sheer speed, no perceivable lag.
A problem I had with only half the SMS notification tone being played (before it cut off) has gone away.
Bad:
Battery drain terrible even when idle. Turning off Google Now, Location Services and Samsung Push Notification fixed this.
When I activate Smart Stay, the screen does not want to turn off 80% of the time - even when I'm not looking at it.
When I wake the phone using the home key, it exits the app I was in. Previously, this would wake the device and return you to the current app (after unlocking). I have a partial work around using the PreHome app; this way the app is still visible underneath the PreHome dialogue box and I just need to press Back to get to my app again.
Widgets, seem to refresh less regularly, particularly Messaging and Gmail widgets which seem to hardly even refresh when I want them too.
Of No Consequence:
The red charging led is a little dimmer when charging.
Overall:
The speed benefits outweigh the niggles - just!
Dan
ohyesman said:
I am now using a App called WiFi Timer to automatically switch Wifi on and off when i leave/get home.
Click to expand...
Click to collapse
No need for an App. You can do it inbuilt.
Go to Wifi, Menu button and Advanced
eggman89 said:
No need for an App. You can do it inbuilt.
Go to Wifi, Menu button and Advanced
Click to expand...
Click to collapse
Yep i know, but this app is far better as it lets you setup different profiles for mornings, evenings & weekends etc which the inbuilt one don't. :good:
root?
i may just root my phone as i really am not happy with this jellybean update, nothing has really improved for me, if i root it and install a rom like codename all the features like quick reply would be there right?
Got the OTA update to L on my 6833. Yes, it has made the already smooth animation slightly smoother but otherwise what is there? The power widgets are gone, I had to install third party Power Toggles app. The new notification swipe down is annoying, having to swipe up when waking device is annoying. The status bar colors are inconsistent. The menus look childish looking.
Without being dramatic, did Sony take all this time to make sure it ran without crashing? Because I notice very few changes (not even improvements, just any changes) on the UI. I must be missing something.
more than that:
can only set one volume at a time.
either portrait or auto, you can't force landscape like in KK.
animations are fluid, but the functionality isn't. My opinion is, if the device has extra power that it can use to make things animate, slide and fade all over the place, better to put that extra power into making the device perform faster. Anyone here who prefers prettier animations instead of faster functionality?
low resolution screenshots in the recents screen. wat. Seriously... wat? Also, the way they've made it it is faster to just go to the apps screen and open whatever app i want, instead of waiting for the recents screen to load and then scroll awkwardly through the programs... Also, you can only see three recent apps. On a device with 6" of screen. three. think about it.
Also... what is the point of having screenshots, anyway? icons are faster, easier to distinguish, take fewer resources and smaller area on screen.
I agree fully on the recent apps screenshots. The blurry images are embarrassing and don't at all go with the clean/sharp theme of everything else. I don't understand why they've made it low res, can't be for performance given no restraint or need anywhere else. Bizarre!
There is over-prettying. For example, the stupid screen swipe up to unlock (after hitting the power button already), the sparkles are just so unnecessary, it is one of the few places the phone actually seems to struggle pulling off the effect.
At the moment my biggest problem is with Yahoo Mail. The account does not seem to auto-sync despite all the settings being correct and even when I force the sync manually the notifications don't show. I've uninstalled and reinstalled, most likely Yahoo to blame, their webmail is always breaking but never ever had a single issue before with KK. This is problematic because it is effectively no longer push email, I have to manually check 50 times a day.
My biggest annoyance is the inability to reclaim the Google search bar area in the Home Screen. I don't want that search button, why can't I use that space, and why a stupid dot to represent the pages of the Homescreen when I only have 1.
Is there actually anything different/new on the backend? My issues aren't severe enough to go back to KK (yet) but seeing what I see, I would have no problem whatsoever buying an Xperia Sony will not upgrade beyond KK.
jess91 said:
Got the OTA update to L on my 6833. Yes, it has made the already smooth animation slightly smoother but otherwise what is there? The power widgets are gone, I had to install third party Power Toggles app. The new notification swipe down is annoying, having to swipe up when waking device is annoying. The status bar colors are inconsistent. The menus look childish looking.
Without being dramatic, did Sony take all this time to make sure it ran without crashing? Because I notice very few changes (not even improvements, just any changes) on the UI. I must be missing something.
Click to expand...
Click to collapse
I agree with you about small changes. I even face some strange problems in my WiFi. the mac address haven't change, but I can't connect to my work WiFi protected network. Sometimes it connects in limited status. One of my friends which updated his Ultra has this problem too.I could connect it to my laptop adhoc wifi netwrok, but for one time. it even can't connect to that network anymore. I rolled back to my stock 14.4.A.0.133 backup. and a'm waiting to fixes from sony.
Agree with you guys. And that stock greenish blueish greyish statusbar color pisses me off! Anybody knows how to change that color?
Quite pathetic attempt by a mod to bury this thread by moving it to this section. If negative feedback on L bothers you so much, delete the thread and censor it outright. Sad day for xda.
100% Free - 100% GPLv3 Open Sauce - No ads - No tracking - No nags - Optional donation
Holey Light is a LED emulation app. It animates the edges of the camera cut-out (AKA punch-hole) as replacement for the sadly missing LED on many modern devices.
Additionally, it provides a notification display for when the screen is "off", replacing - or working in conjunction with - the Always-On Display feature. As this display is not around the camera hole, it is aptly named the Unholey Light.
Supports all Samsung devices with in-screen camera hole, and several Google Pixels.
Features
Emulates notification LED
Four different display modes: Swirl, Blink, Pie, Unholey Light
Configurable animation size, position, and speed
Customizable color for each notification channel
Selects initial notification color by analyzing dominant color of app icon
Displays during screen "off", sub-1% battery use per hour in Unholey Light mode
Separate configuration modes for different power and screen states
Ability to mark notifications as seen based on various triggers
Respects Do-Not-Disturb and AOD schedules
Can hide AOD completely, partially, and/or keep the clock visible
Additional AOD Helper package for further battery usage reduction
All teh details and all teh sauce!
It's all on GitHub!
Download
You can grab it from Google Play.
Feedback
You can feedback here. Or in the GitHub issue tracker. Or talk to me on Telegram. I guarantee no response or fix.
The workings of the app are quite intricate, so describe what is happening in minute detail.
TODO
You can find the TODO list in the issue tracker.
Enjoy!
Or not.
Changelogs and release notes have been moved to GitHub
- also reserved -
Here we go. Another app I'll probably buy.
Just post the donate button now. ??
Nothing pops up on my S10+ after permission needed 2/4 (link device). Are there any logs i could provide? Is there any way to link it manually?
Seems not working for me - S10.
I tried it and received some push notifications from telegram, Outlook and WhatsApp, but no holey light (nice name btw).
F0rbidN said:
Nothing pops up on my S10+ after permission needed 2/4 (link device). Are there any logs i could provide? Is there any way to link it manually?
Click to expand...
Click to collapse
There's no selection dialog for a Wi-Fi network / Bluetooth device at all? Have you tried closing/reopening the app? Uninstalling/reinstalling it? Making sure Wi-Fi and Bluetooth are both on and you're connected to something?
I do not know how to link the device/companion app manually, no. Until I needed it to work around a bug in the notification system, I didn't even know it existed.
Jannomag said:
Seems not working for me - S10.
I tried it and received some push notifications from telegram, Outlook and WhatsApp, but no holey light (nice name btw).
Click to expand...
Click to collapse
Try un/reinstalling and rebooting.
I've seen others who use notification access comment it sometimes doesn't start, though I haven't encountered that behavior even once during testing.
Otherwise I don't know. Did you grant all the permissions? Did a device link pop up?
It could of course also be an internal crash. Check logcat.
Chainfire said:
There's no selection dialog for a Wi-Fi network / Bluetooth device at all? Have you tried closing/reopening the app? Uninstalling/reinstalling it? Making sure Wi-Fi and Bluetooth are both on and you're connected to something?
I do not know how to link the device/companion app manually, no. Until I needed it to work around a bug in the notification system, I didn't even know it existed.
Click to expand...
Click to collapse
Enabling Bluetooth fixed it, I didnt know it has something to do with it. Thank you for your work an quick help.
F0rbidN said:
Enabling Bluetooth fixed it, I didnt know it has something to do with it. Thank you for your work an quick help.
Click to expand...
Click to collapse
Neither did I, hah! It actually shows Wi-Fi networks for me too, and selecting one of those worked just as well during testing, so I didn't think it'd matter.
thanks master for your app.
I'm using s10+ exinos and i just want to report that's working.
my device is charging and notification is working fine, got an email for testing. i hope it will work if device is using battery power and screen keeps off if notification comes in.
additional info if it's important: I'm using fingerprint, face and pin security.
thanks again
m8980 said:
i hope it will work if device is using battery power and screen keeps off if notification comes in.
Click to expand...
Click to collapse
Hopefully soon, but I am quite busy with my day job at the moment, it may be a week or two!
Thanks!
Off screen show lights does not show.
i am charging my phone wirelessly and AOD is turned off.
on S10
Can't seem to get it running but I'm super excited about this. Maybe I need to ditch the Samsung edge Lighting
When I tried to perform permission needed 2/4 (link device), I cannot find any device name call "Holey Light" and I only can find the Bluetooth-enable device around me. Do I just need to choose one of them?
Chainfire said:
Try un/reinstalling and rebooting.
I've seen others who use notification access comment it sometimes doesn't start, though I haven't encountered that behavior even once during testing.
Otherwise I don't know. Did you grant all the permissions? Did a device link pop up?
It could of course also be an internal crash. Check logcat.
Click to expand...
Click to collapse
I found out that it's working for Gmail and Samsung's Stock Email app, even when locked.
WhatsApp works, but only when unlocked and only when status bar is visible (so not for full screen apps).
Does your app stops the phone from going into deep sleep?
hi,
what shall i need to do to step 2/4?
attached the image.
m8980 said:
thanks master for your app.
I'm using s10+ exinos and i just want to report that's working.
my device is charging and notification is working fine, got an email for testing. i hope it will work if device is using battery power and screen keeps off if notification comes in.
additional info if it's important: I'm using fingerprint, face and pin security.
thanks again
Click to expand...
Click to collapse
how did you passed step 2/4?
It's written in the description what to do. Link it to any Bluetooth or wifi nearby.
pigmich said:
When I tried to perform permission needed 2/4 (link device), I cannot find any device name call "Holey Light" and I only can find the Bluetooth-enable device around me. Do I just need to choose one of them?
Click to expand...
Click to collapse
Just pick something, it doesn't matter what.
Jannomag said:
I found out that it's working for Gmail and Samsung's Stock Email app, even when locked.
WhatsApp works, but only when unlocked and only when status bar is visible (so not for full screen apps).
Does your app stops the phone from going into deep sleep?
Click to expand...
Click to collapse
WhatsApp works fine for me, both locked and unlocked, so that's strange. What sort of full screen app did you test with? Might be Android hides the overlay when an app is fullscreen? Note it only works in portrait mode, there's no way to draw in the right place in landscape.
stefanz08 said:
hi,
what shall i need to do to step 2/4?
attached the image.
Click to expand...
Click to collapse
Just select something, doesn't matter what.
Arc Lighting adds a highly customizable ring of light around the camera cutout of your phone. You can use this light with various indicators such as audio visualization, notification lighting, critical or low battery warnings, as well as a charge indicator. The ring can also appear on your Always-On display. (to make aod work you need to make sure you have downloaded always on amoled and activated it, you also need to make sure samsung stock aod and samsung edge lighting is disabled under samsung display settings you also need to make sure that aod is enabled under arclighting with override set to off)
https://www.youtube.com/watch?v=FibMTD5Mdx8
Features:
- Highly customizable lighting for the Galaxy S20, S20 ultra, S10e, and Note 10 and noteplus devices. Select a variety of colors, animations, and styles.
- Always show ring with various gradient effects (add multiple colors and make them spin for a visual experience)
- An adjustable glow effect that can be turned on or off (sometimes this can cause the light to freeze to a white glow this will be fixed)
- Notification lighting both when the display is on or off (update planned for only the lockscreen or only inapp)
- Music lighting that syncs the light to your music (does not work together with other indicators so other indicators will stop working if you enable music lighting this will be fixed)
- Battery indicator lighting for charging, low and critical battery states. (note it will not work until you configure the zones you want the colors to appearm, not configuring zones can freeze the light entirely this will be fixed)
- Device overheating indicator for gamers and power users (note it will not work until you configure the zones you want the colors to appear, not configuring zones can freeze the light entirely this will be fixed)
- Arc Lighting can be configured to match the color of your wallpaper, the app you're currently in, or both! (this only works for the only show ring and only when you set it to a solid color the option is not available for gradient colors which will be added later)
This app requires certain permissions to function correctly.
Accessibility: This permission is used for the ring to appear over your lock screen, always-on display, and for accessing the color of the current app you're in. This permission is required for the app to function properly.
Draw Over Other Apps: This permission allows the ring to show on top of other apps. This permission is required for the app to function properly.
Microphone Access: This permission is used to analyze the internal device audio for the music lighting. You will not be asked for this permission unless you choose to enable the Audio Visualizer indicator for the ring.
Storage Access: This permission is used to get the color of your wallpaper. You will not be asked for this permission unless you choose to use the color of your wallpaper for the ring.
Notification access: This permission is used to change the color of the ring after notifications
Burn-in concerns: Some Android displays may suffer from mild burn-in if a single item is displayed on the screen for an extremely significant amount of time. If you are concerned about this, feel free to enable the rotation animation in ring settings. That will ensure the display is constantly changing. Alternately, you can disable the default effect to only show the ring while an indicator is being triggered. Note: Samsung Galaxy devices come with burn-in protection that moves the pixels a little each time.
Compatible Devices
- Galaxy S10+
- Galaxy S10
- Galaxy S10e
- Galaxy note 10
- Galaxy note 10+
- Galaxy note 5g
-Galaxy S20
-Galaxy S20 Ultra
-Galaxy Z Flip
-Oneplus 8
-Oneplus 8 Pro
Download (xda members get free access, will provide unlock codes to any xda member who asks when you ask please specify if you want the code for my navigationbar app or this app as they both have similar names)
https://play.google.com/store/apps/details?id=com.symetium.holepunchcameraeffects
FREQUENTLY ASKED QUESTIONS:
how do i disable individual notifications: currently this is a planned update, you can go into custom colors and set each app you don't want notifying to 100% transparent
light is constantly flashing even if i cleared all notifications: sometimes theres forced notifications such as when you're charging it will force a notification that says you're fast charging, the light will pick up on these you need to hold on these notifications and turn them off to stop the light there should be nothing at all in the notificationpanel, if you still have a flashing light with nothing in the panel contact me.
frozen light: music lighting will disable all other indicators same with battery indicator or battery temp indicator, you need to set custom zones otherwise the light will be frozen, glow also tends to freeze the light so turn that off if it's frozen (this will be fixed in a coming update)
How does it work if the front display is set so the camera is above the top of the display (as the OnePlus 8 can do)
Alan
Doesn't work on OP8 Pro with 'Hide the front camera' set in phone settings
alan sh said:
How does it work if the front display is set so the camera is above the top of the display (as the OnePlus 8 can do)
Click to expand...
Click to collapse
Just tried it, and it doesn't work as you'd hope - the ring moves down with the adjusted screen position so it's no longer around the camera. I don't use my phone in that mode so it's not an issue for me.
On a happier note it's quite a cute app. Takes a bit of getting used to though.
One to watch out for: If the 'Enabled' switch is turned off (during the test process) then it drops the 'Accessibility Service' permission. Unfortunately the app doesn't realise that (seems to only test on app startup), so when you re-enable it the app then doesn't work (cos the Accessibility Service permission has dropped). To get around I 'force stopped' the app then started it again. It then does the service check and comes up with the pop-up.
Look forward to having a default 'Off' setting so I can enable only for a few specific apps - I have a lot of apps on there and setting them all to 100% transparent is more work than I fancy.
Cheers, Dave
LampyDave said:
Just tried it, and it doesn't work as you'd hope - the ring moves down with the adjusted screen position so it's no longer around the camera. I don't use my phone in that mode so it's not an issue for me.
On a happier note it's quite a cute app. Takes a bit of getting used to though.
One to watch out for: If the 'Enabled' switch is turned off (during the test process) then it drops the 'Accessibility Service' permission. Unfortunately the app doesn't realise that (seems to only test on app startup), so when you re-enable it the app then doesn't work (cos the Accessibility Service permission has dropped). To get around I 'force stopped' the app then started it again. It then does the service check and comes up with the pop-up.
Look forward to having a default 'Off' setting so I can enable only for a few specific apps - I have a lot of apps on there and setting them all to 100% transparent is more work than I fancy.
Cheers, Dave
Click to expand...
Click to collapse
could you explain what you mean by ring moves with the adjusted position, and thank you for reporting the bug.
Hi! Is it possible to get a code for the oneplus 8 notification light app? I'd be glad to test it out !
Thanks
On my Oneplus 8 IN2013 your ring stays a little bit outside the camera hole.
The camera is a little bit lower and to the left.
DM me if you need help.
In my device too the ring is a bit off. I attached a screenshot
This is a great idea. I miss the LED indicator so much after I bought oneplue 8. The position of the ring is not accurate, however, it locates a little up-right of the camera. Hope you can fix it and I will definitly give it a try. Thanks.
Awesome app, like it a lot - is there a way to send some money your way to get rid of the ads, too?
Registered for the Beta, hope it fixes the position issue on the OnePlus 8
Update: Just paid for the full version, got the beta, but none of the cutout settings have any effect on my OnePlus 8, cutout stays in the wrong position.
it seems, the developer was not accounting for the oneplus 8 and 8 pro being different screen sizes please try this file and tell me if it works
https://drive.google.com/file/d/1FhuBQpYG-Sw2f6UD8AI_BURpAh_G6v4M/view
gave a thank you to all of you to give you a notification
zzcool said:
it seems, the developer was not accounting for the oneplus 8 and 8 pro being different screen sizes please try this file and tell me if it works
https://drive.google.com/file/d/1FhuBQpYG-Sw2f6UD8AI_BURpAh_G6v4M/view
gave a thank you to all of you to give you a notification
Click to expand...
Click to collapse
No, doesnt work, still cant configure the placement of the ring!
masterchief_2001 said:
No, doesnt work, still cant configure the placement of the ring!
Click to expand...
Click to collapse
could you send an email to [email protected] with photos showing the issue thank you
masterchief_2001 said:
No, doesnt work, still cant configure the placement of the ring!
Click to expand...
Click to collapse
please try this one
https://drive.google.com/file/d/1u7lKrNBESy9VQGTV7eNnwfl-F2ElFsbr/view
zzcool said:
please try this one
https://drive.google.com/file/d/1u7lKrNBESy9VQGTV7eNnwfl-F2ElFsbr/view
Click to expand...
Click to collapse
Thanks, now it works great!!
zzcool said:
please try this one
https://drive.google.com/file/d/1u7lKrNBESy9VQGTV7eNnwfl-F2ElFsbr/view
Click to expand...
Click to collapse
Hi zzcool,
at my Oneplus 8 the cutout isn´t placed around the punch hole, the cutout position can´t be chanced either.
Cheers!
Can I get a code for the app too?
Just tried it on the OP8,
The ring is set slightly wrong. The camera is a bit to the left and lower.
There are several problems with the app (in my op8). The ring always appears even if you unlock the screen. The ring cannot be adjusted around the hole of the camera. And most importantly, for the ring to show me when the screen is off I have to have the "Override system" option activated, but when the ring is activated the fingerprint sensor also appears (and does not disappear). This can burn the screen over time and increase battery consumption.
Would love to have code for this one
Great work !!
I'd like a code for the premium edition if you'd be so kind?
I'll leave a review on the play store when I've used it
Thanks!