Hi,
I'm somewhat of a noob regarding Tytn/Hermes updates etc. Hopefully someone can help me with this problem.
I just bought a Jabra BT620s bluetooth headphone. Connecting works but when I play music in Windows Mediaplayer, the music sometimes stops as if it's buffering a stream.
Does anyone know if this has something to do with a bad connection or should I install some other musicplayer on my PDA? Or is it because the Jabra is just a worthless headphone?
thanks in advance
this has been noticed by several folks now. also problems such as slowing down and speeding up of the audio.
My tests have concluded that i couldnt run my bluetooth head set and bluetooth gps at the same time. on its own the headset was great.
Check you have nothing running as well as wmp also if it is an a2dp headset do a search for the way to add support somewhere on here.. sorry dont know the link.
Music skipping on me as well
I just bought the BT620 - and tried several music players - they all skip. Sometimes I can get thru an entire song and other times it skips so bad as to cal it worthless. The speed up and slow down pitch is very annoying.
Is the issue the headset or the BT stack the MDA uses.
Is there a fix/hack ?
Thanks
I just purchased the Cingular 8525 and BT620s. I can only get the headphones to work as a telephone headset. They will not work with the media player at all, the sound comes from the handset everytime. I have tried pairing them several times, but with no success. Any ideas?
CrazyBrit said:
I just purchased the Cingular 8525 and BT620s. I can only get the headphones to work as a telephone headset. They will not work with the media player at all, the sound comes from the handset everytime. I have tried pairing them several times, but with no success. Any ideas?
Click to expand...
Click to collapse
Same Problem. But my BT620s does not work with AVM Blue!Fritz, MDA3 nor with a Logitech DiNovo Desktop. I'm getting angrrrry...
Actually, I got it fixed. With the headset on, and paired, goto the communications manager (second button down on the right side of the handset) and click on settings>bluetooth settings. Then go to the Devices tab. If the heaset is paired with the 'phone you will see it in the list. Click and hold the stylus on the Jabra BT620s item and a pop-up menu will appear. Select "Set as Wireless Stereo". Majically the 620s headset will start flashing both earphones (instead of just one) and it works fine. The headset will automatically switch from phone mode to A2DP mode from that point on. It's slick. I have not encountered the buffering problem reported by others.
Good luck...
Just got my bt620s's and am having the same issue. thought that reducing the quality with fit4cat would work, but nothing seems to fix it. also, for some reason the X-button functionality of spb pocketplus is gone when listening to music with my 8525. After pairing the headphones with my G5, sound quality is worse then than that of the 8525, but I experienced no pauses or skips with the computer, however massive pauses (almost a minute) with the 8525. Tried using mortplayer and wmp. I think these are getting returned unless any of you have found a fix in the meantime. Not to mention the entire phone slows to a crawl, not good.
I too use the Jabra BT620s with the 8525. I also have buffering problems. However, the Jabra also freezes (i.e., locks) the 8525. Bottom line, the Jabra BT620s is being returned.
Hi, I just posted a new thread where I explained how I got the whole thing working http://forum.xda-developers.com/showthread.php?t=293054
Horst-Vario
Mono instead of Stereo !?!?
Mind the fix of CrazyBrit above, it made the BT 620s jump to Audio mode (both earpieces flashing). The problem with interupted streams got fixed once I shut the WLAN / WIFI function of while listening to music. Remember: WLAN and BT use the same frequency band. In a "normal" data stream interferences are a side issue, but in realtime streams - fatal.
However, even that everything seemed fine with my set, I only hear MONO audio, ie. the left and the right earpiece give exactly the same audio. Now i am stuck. Any hint for me? I got a Swisscom / Vodafone v1605 OEM of the HTC TyTN plus the BT620s. Anybody aware of a firmware update, a software fix or a tricky setting?
Thanks,
Pefis
Well guys ....
I used to have the skipping issue as well , seems to be either a a2dp hack issue , or the ROM is too slow to handle streaming and decoding siultaneously !
Not any more .......
I started using XM6 , and WOW , I can run pocket player without overclocking , and I can finally get pocketmusic to run smoothly and stream a2dp !
So give it a try , worked for me , may work for u !
I am running the bt620s with wm6, everythnig works beautifully. It also worked great with wm5, but 6 is better.
Now for me, these 2 settings made a world of difference as far as quality goes:
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/Bitpool=60
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/MaxSupportedBitpool=35 (or greater)
Hi guys,
I have a problem with my BT headset.
It's a Nokia BH-504.
When I make a call and use the headset, hanging up sometimes sends my headset into a weird state in which it no longer responds to input. I have to reset it. It does not behave this way with other phones.
It does however work beautifully when using just the media routing with it.
Is there any way in which I could prevent the phone from using the headset as a phone call audio device? I mean permanently.
I am using a non-rooted official 2.1 GSM HTC Hero.
Thanks.
Hi guys,
I've got my HD2 (winmo + Android on SD) and a new bluetooth stereo pair of headphones.
i've got a problem with these headphones : if i use them to listen to music on winmo, the music is very choppy as if the bluetooth connection dropped often.
The strangest part is that my headphones work perfectly well with my laptop, or even with my HD2 on Android.
But in winmo, the sound is choppy
Anyone got an idea to solve this problem ?
Thank you,
Radio issue?
it's quite possible that this is an issue with the radio version that you are using. check out the Radio version post to check you are using the most suitable radio version for the ROM you are using.
Just wondering if they have fixed Bluetooth Audio yet? Seems to be that in my car it connects to the phone part fine, but when it connects to audio it comes up "BT Audio Device Error" then I have to wait another couple of minutes before it connects fully. One of the only reasons I stopped using MIUI, since I always listen to my phone's music in the car. Only been happening since ICS versions. Or does anyone know of an Alternate MIUI without this problem? Asnet, Etc....
Hello,
Need some help with phone calls not passing through Bluetooth to my car stereo.
It's a new stereo, the old one died, but I could make/receive calls with it without any problems.
The new stereo recognises BT media audio, but not phone calls (incoming or outgoing).
The BT settings screen shows the car stereo as "Connected (no phone)"
I am using [ROM][Slim][6.0.1][AOSP_r74][Slim 6 For Kenzo][21/11/2016] and I saw two posts here and here from @DoubleDroz experiencing the same issue.
I would ask at that thread, but unfortunately it has been locked by @Umang96.
I've seen this problem mentioned before with some ROMs.
I know the phone's BT works fine because it worked with the previous car stereo only yesterday (and it works with the new stereo for media audio).
I've tried a few apps from the PlayStore but nothing sorted the issue.
Ideally, I'd like to stick with this ROM, old as it might be, as I find it just fine for my needs (I don't play any games, it's work only).
But if I have to install a different ROM to get bluetooth calls in the car I will because it is a necessity.
I don't want to install MIUI though, can't stand it.
I would use Krexus-CAF if it hadn't the issues with GPS navigation, which is also a necessity.
Any ideas or suggestions?
Hi, i found fix for bluetooth "NO PHONE" on car set. It's work on latest LOS rom. Follow this post.
https://forum.xda-developers.com/showpost.php?p=72757753&postcount=1