Related
hi,
can anyone still running the original japanese rom on x01ht share the manner mode executable with me? i don't recall the exact name of that file but i think it was like manner_mode.exe you can find in windows directory.
i had it backed up when i made the rom switch to tytn but i somehow lost it. appreciate it if you could reply to this with that file attached.
thanks in advance...
can anybody help?
Is that the program that activates manner mode by press and holding the comm manager button?
Sorry I don't have it either, I flashed English and would love this functionality back too.
tle,
yup, that's what I'm asking for. i think it will benefit everyone if someone can upload it here.
Isn't it on x01ht ExtROM? If it's not you can probably extract it from the dumped rom.
pof said:
Isn't it on x01ht ExtROM? If it's not you can probably extract it from the dumped rom.
Click to expand...
Click to collapse
It's definitely not on the extrom... I've converted a half dozen X01HTs from Japanese to English, and not been able to restore that function. Thanks for the links to the dumped ROM; that should help me get some of the softbank special stuff back...
- awh
hi guys,
it's not on the extrom. it's in the windows directory for sure. i once copied it on my storage card but i lost it when i screwed it by reading that micro sd card with my pc.
pof,
i realized that you might be right saying that it's on the extrom. i recall that it was not a rom file and it was a file copied into the windows directory. i think that means it was installed by one of the sb cab files on the extrom. the only cab file i did not execute was PT_SIMlock_Empty.cab.
harryk1372 said:
the only cab file i did not execute was PT_SIMlock_Empty.cab.
Click to expand...
Click to collapse
I think it's not on this one, this just adds the "annoying screen" for simlock protection by software. If you install this then you need to install SB_USIM.cab to remove the annoying screen.
pof said:
I think it's not on this one, this just adds the "annoying screen" for simlock protection by software. If you install this then you need to install SB_USIM.cab to remove the annoying screen.
Click to expand...
Click to collapse
I agree - I still have the unnerving feeling that some of the content in the extrom actually points to executables somewhere in the ROM. Bad band-aid type code, but what would you expect..? I think I saw similar on the i-mate extrom where it tried to execute parts of the standrard rom after a cold reset..
pof said:
I think it's not on this one, this just adds the "annoying screen" for simlock protection by software. If you install this then you need to install SB_USIM.cab to remove the annoying screen.
Click to expand...
Click to collapse
I know pof... that's why i didn't run it.
Is it this??
Dear all members
I saw some bbs mentioned as follow
'there is a file that was conianted in X01HT WINDOWS folder
TrayIcon_MannerMode.exe'
But I'm not sure is it correct?
Manner mode is called in oversea 'silent-mode' or 'flight-mode'
I've flashed my X01HT to Dopod rom so that I can not try it.
anyway let's you try it.
BR,
krnnidtt,
i don't exactly remember the file name but i think the one you saw is the one i am looking for. it's not the "flight-mode" that turns the radio off but it is the same as the "silent-mode" and turns the vibrator on.
you can turn on the vibrator by opening the comm manager and tap on the vibrator icon, but this small exe file i am looking for does the same by just press and holding the comm manager button. when that is on, an icon sits in the tray. not a big deal but it's convenient.
i'll check the dumped rom pof advised.
Now that I understand what "manner mode" is, this might be useful for you too:
http://forum.xda-developers.com/showpost.php?p=1019893&postcount=1
hi pof,
thanks a lot for that. it works great and this is what i wanted. i should have searched more to find this thread myself in the first place. now i will find a way to assign this to press and hold state of the comm manager button (button 3).
Is there a good Samaritan out there who can explain to me exactly how the program is installed and how does one go about editing the Registry of the TyTN. I have bought Nokia HS-12W BT stereo phones and have added in Sleuth's anti-skip modification. All works well except that I do not get stereo. I must modify the Registry according to Sleuth's working model, and need to do the Registry mods.
Please help!
I am sure there are other newbie's who are also keen to learn new tricks.
Which problem are you exactly having? Just install the cab file, run the program and browse the registry to the place you want to modify, add or delete a key. Tap on the key or screen to do this.
You have to copy the cab file to your Hermes first. When I install cabs, I either send them to myself as email attachments or I use activesync explorer mode. Alternatively, if you can find the site using Pocket Internet Explorer (PIE) then you can download the cab directly. Once the cab is on your Hermes, then tap to install.
There is an alternative way to install apps on WM and that's with a windows based installer. If the file isn't a cab, then you'll need to connect up your hermes with its USB cable, wait for activesync to connect then run the installer on your PC. The installer itself will send the cab file over for immediate installation.
If you're familiar with the Windows registry you'll have no problems understanding the WM registry. When you change a value, make sure you power off with the power button to reset & make the change active, otherwise your registry setting might not "stick". Some registry values take effect immediately but I always power cycle after making a change just to be sure.
Installing PHMRegEdit
Hi
Could you please attache the CAB file.
I have load the file and the file is PHMRegEdit.msi
Thanks
I was wondering "which" .cab to copy over for the AT&T Tilt 8925. I did try the Stngr_ARM and it did install. However, I can not expand the registery top folders or export the registery.
Thank you in advance
OK, figured it out.
regedit.Mrln_ARM
did the trick
This program is for those of you looking for HTC Cube program which -
1) Runs on O2 ATOM
2) Which works fully without using FlashLite or FlashPlayer
3) Which is low in memory requirement and does not increase battery consumption.
4) Has a Contact page on cube that is fully working and integrates with HTC Home plugin
5) Which is tested on ATOM and is considered relatively 'stable' code
THIS IS ONLY TESTED ON O2 ATOM
NOTE: All other PDAs can try but please test it at your own risk and feedback if it works for you.
HTC Touch Cube working on O2 ATOM(WM6 AKU0.7.0)!
================================================================================
LATEST UPDATE - NOV 18th 2007
+++++++++++++
Touchflo Alpha 2
+++++++++++++
PRE-REQUISITE: This program needs HTC Home Plugin, HTC Music Plugin, and HTC AudioManager to be fully integrated.
The latest Alpha 2 cab file is downloadable now!
(See one of the attachments here labelled - Touchflo alpha 2.zip)
Instructions
1) Install this cab file
2) Delete APL, Biotouch, and HUB from the /Windows/Startup first to avoid black screen problem.
3) Soft-reset
Features in this cab file -
1) Finger activation of cube
2) Efrost's 'activation icon' at the top bar is no longer visible.
3) All efrost's finger scrolling features available and functioning.
FOOTNOTE:
1) You must uninstall the old version of this cab first. Then soft-reset before installing this one.
2) This cab does not include Touch Settings - for this feature, you can still download the Touch Settings V1.22.cab attached below.
3) You can ignore all the other archive information below to avoid confusing yourself!
4) You can ask for help in this thread but don't expect me to help you troubleshoot unless you're using an O2 ATOM!
5) Please share your ideas and findings here on how to improve it further.
=====================================================================================
TO GET FULL CONTROL MOVEMENT OF CUBE
THIS CUBE WILL NOT BE COMPLETE WITHOUT MENTIONING THE BREAKTHROUGH THAT KONA MADE FOR THE HTC CUBE ON NON-TOUCH DEVICES LIKE THE O2 ATOM. THANKS KONA AND GANG FOR DOING THIS!
To learn more, visit Kona's thread here: http://forum.xda-developers.com/showthread.php?t=343583.
NOTE: Kindly donate(any amount, no matter how small) to these WONDERFUL DEVELOPERS who solve so many problems for us in O2 ATOM!!!
=====================================================================================
ARCHIVE INFO - from previous postings.
Hi guys,
I've managed to get the HTC Touch Cube working with jiggs's WM6 AKU 0.7.0. Not sure if anyone was previously successful in doing this. But unfortunately, at the moment, it is using the ButtonFlo method of turning the cube.
I dont have the expertise to get this thing working using the Finger or stylus to get the touchscreen to turn the cube yet.
Maybe one of you geniuses out there will be able to take this one step further and get it working fully! (I'm hoping)
To get the HTC Cube working with finger touch-screen capability (using eFrost's FTouchFlo) - just follow the steps in post #150 - http://forum.xda-developers.com/showpost.php?p=1598731&postcount=150
The files needed for this installation is also located in this post.
============================
ALTERNATIVE INSTALLATION METHOD
============================
ALTERNATIVELY, if you want to configure using the long-way; and using the attachments below, please follow the steps listed here:-
INSTALLATION STEPS -
1) Install jiggs's WM6 AKU070 (make sure HTC HomePlugin is activated - dunno if you really need it).
2) Install HTC Audio Manager.
3) Install HTC Audio Mgr Today Plug-in.
4) Install Touch flo(Alpha).cab
5) Install JT ButtonFlo.cab
6) Map Touch Flo pgm to one of the buttons - I chose the O2 Media Plus button.
7) Soft-reset.
PART 2 - Customizing Your Cube using Touch Settings!
Step 1: Install Touch settings V1.22.cab, then soft reset.
Step 2: Go to windows\startup and delete file called "Mediahubmini"
Step 3: Soft reset (I don't think it's neccesary though, but i do perform
this step.
Step 4: OH YES! Also install the missing ICON files for the APLauncher - AL_xx_Touch.zip into a separate directory (eg. \Touch).
Step 5: Copy the same ICON files(from Step4) into \Windows. (these files were missing in Part1).
Step6 - Soft-reset and you should see everything working!
CHECKLIST ON HOW TO AVOID BLACKSCREEN AFTER YOU INSTALL THIS APPS
1) Make sure that you have HTC Home, HTC Audio Mgr & Plugin installed and activated in Today settings.
2) Make sure you install all the missing AP_xx_Touch.zip ICON files.
3) If you have Touch Settings program installed -
a) Make sure you DELETE MediaHubMini.lnk from \Windows\Startup &
b) Start Touch Settings and click SAVE to save the settings once after missing icons are installed.
Once you have Steps 1-3 done properly, just do a SOFT-RESET and the cube should be working.
NOTE: Below is a photo of Touch Settings V1.22.
( and here's the official link from the author - http://ww2.fatattitude.com/software/software-item.aspx?appid=10 )
If you're happy with his work, you can buy him a beer - http://www.fatattitude.com/buybeer)
Additional info available here - http://forum.xda-developers.com/showthread.php?t=324556
(Pls note that this is still in Alpha testing stage so install at your own risk)
ADDENDUM - (POSTED on OCT 16, 2007)
TOUCHSCREEN ACTIVATION FOR TOUCH CUBE
Thanks to efrost's FTouchFlo (Alpha 3 version) with application launcher function, I can now use my finger to 'activate' the cube without using button!
For efrost's program FTouchFlo, please refer to his posting and donate if you're happy with his contribution! Here's the link - http://forum.xda-developers.com/showthread.php?t=334965
Pre-requisite - you MUST have a working Touch Cube on yr ATOM.
Step 1 - Install efrost's FTouchFlo ( and follow his instructions to calibrate and then try making sure u can scroll).
Step 2 - Replace the default FTouchflo config file under /Program Files/FTouchFlo_a3/FTouchFloConfig.txt with the one I've posted here.
Step 3 - Restart FTouchFlo - under Programs, select Start FTouchFlo and then u try to test the scrolling.
Step 4 - You're ready to test the activation -
a) You must first put Ftouchflo into launcher mode (IMPORTANT STEP) - swipe your finger from down-to-up-and-down again in one swift motion. (you will hear a *beep* on your PDA to let you know that you've toggled into launcher mode.
b) Just swipe your finger from LEFT to RIGHT and then it will automatically launch the cube on your screen!
Step 5 - Once the cube is on yr screen, you can then continue to swipe from LEFT to RIGHT and be able to turn the cube.
TO ENSURE RESPONSIVENESS IN YOUR DEVICE
To ensure responsiveness in your device, do not specify too many applications to launch using gestures - I've modified FTouchFloConfig.txt to only launch the cube.
The touchscreen functionality for this Touch cube will improve as efrost improves his program!
Thanks efrost!
(Pls note that this is still in Alpha testing stage so install at your own risk)
NOTE: NO OFFICIAL SUPPORT IS PROVIDED FOR ANY OF THESE SOFTWARE POSTED HERE!
That good news if it can work. Will try it out when i'm free.
http://forum.xda-developers.com/showthread.php?t=333163
this is the one ur asking right? same touchflo? the author of that program is on that thread. He visited there & u may ask some question to him.
Hi mikewtw. May i know the installation steps?
wonder12 said:
Hi mikewtw. May i know the installation steps?
Click to expand...
Click to collapse
please try to read http://forum.xda-developers.com/showthread.php?t=328010 i never try to me also..
Installation steps I used to get Touch Cube working.
Here are the steps I used:-
1) Install jiggs's WM6 AKU070 (make sure HTC HomePlugin is activated - dunno if you really need it).
2) Install HTC Audio Manager.
3) Install HTC Audio Mgr Today Plug-in.
4) Install Touch flo(Alpha).cab
5) Install JT ButtonFlo.cab
6) Map Touch Flo pgm to one of the buttons - I chose the O2 Media Plus button.
7) Soft-reset.
Everything should work beautifully when you press the button for the old O2 Media Plus ( which has now been mapped to Touch Flo program).
Everything in the Touch Flo Cube should work.
And I believe there's also a Touch Flo Cube Customizer program available. I will try to repost it here if I find it working well.
I'm hoping someone will get the touchscreen interface working so that we can swipe and activate the cube using our fingers or stylus! Thats what I'm waiting for!
The ultimate "O2 Touch" is coming!
Mike
I will stick with my Iphone look O2 Atom, much cooler must say
Phone goes missing / Touch Settings V1.22 not working on this Touch Cube yet.
PROBLEM #1
I notice that my Phone button is missing from the HTC Home Plugin after I installed this Touch Cube. So instead of 6 buttons on the Home Plugin, I'm only left with 5 button!
Luckily the Touch Cube (using buttonflo) works and I can put my 9 favorite contacts in the contact page on the cube
When I reinstall Home Plugin again and reset, the 6buttons comes back, but my Touch Cube blanks out Then when I reinstall Touch Cube again, my Home Plugin is missing the Phone button...Oh well...
PROBLEM#2
Also, when I install Touch Settings V1.22, my Touch Cube blanks out when I try to launch it.
Tried installing Touch Settings before Touch Cube and vice-versa, but that didnt help either
If anyone can get Touch Settings V1.22 working with this Touch Cube, please post your files and installation instructions. THanks.
this touchflo is still on demo version, alot of programs have conflict here.
Is this topic's Flo the *actual* one or the Flash based one? <.<?\
Edit: Hm, it's the actual one.
Unfortunately, all the thing does is just blackscreen my device, so I can't test it further.
Ultimate Chicken said:
Is this topic's Flo the *actual* one or the Flash based one? <.<?\
Edit: Hm, it's the actual one.
Unfortunately, all the thing does is just blackscreen my device, so I can't test it further.
Click to expand...
Click to collapse
You must have HTC Audio Mgr and HTC Audio Mgr Plugin installed and also HTC Home Plugin running first.
Then install Touch Flo(alpha).cab and lastly the JTButtonFlo.cab file. Map a O2 Atom button to Touch Flo and then do a soft-reset.
After that, it should work.
Followed the instructions and still got blackscreen'd. Verified that the music manager plugin was running as well.
Is it possible that this program can be affected by the presence of HTC Today?
Also, where do you install it in? Both installing in Device Rom caused a blackscreen. Installing in ExtROM had no effect (pressing the button that runs TouchCube does nothing).
Ultimate Chicken said:
Followed the instructions and still got blackscreen'd. Verified that the music manager plugin was running as well.
Is it possible that this program can be affected by the presence of HTC Today?
Also, where do you install it in? Both installing in Device Rom caused a blackscreen. Installing in ExtROM had no effect (pressing the button that runs TouchCube does nothing).
Click to expand...
Click to collapse
the CREATOR IF THIS program is BYKA.. he is on this thread
Try this in your ATOM..Touchflo...
http://forum.xda-developers.com/showthread.php?t=333163
Byka's Cool Touchflo 3D Cube
http://forum.xda-developers.com/showthread.php?t=328010
try to ask question on that thread..
No no no, Riden, this is NOT Byka's program. If you install it, it says Bepe and someone else, NOT Byka. I have used Byka's rendition before, abliet for just 3 days - this one does NOT require Flash, unlike Bykas, leading me to think it IS the original, ripped, Touchflo cab that I'd seen around here some time ago.
I can NOT ask Byka about this version of the TouchCube. In fact, I have no reason whatsoever to approach Byka, as his flash cube installs and runs perfectly on my device, with the exception of being a memory hog. >.>
Ultimate Chicken said:
No no no, Riden, this is NOT Byka's program. If you install it, it says Bepe and someone else, NOT Byka. I have used Byka's rendition before, abliet for just 3 days - this one does NOT require Flash, unlike Bykas, leading me to think it IS the original, ripped, Touchflo cab that I'd seen around here some time ago.
I can NOT ask Byka about this version of the TouchCube. In fact, I have no reason whatsoever to approach Byka, as his flash cube installs and runs perfectly on my device, with the exception of being a memory hog. >.>
Click to expand...
Click to collapse
ah now its clear so this is another program..can u provide me a screenshot pls.. how good it is?
gives black screen , will wait for touchflo rom ,if it is possible
ah now its clear so this is another program..can u provide me a screenshot pls.. how good it is?
Click to expand...
Click to collapse
I can't, because it blackscreens my device. <.<
I'll try again when I get home, tho, but don't expect a miracle. This needs to be worked on.
started to inspect the TouchFLO. Boy, this is going to be another set of sleepless nights.
Exellent
jiggs said:
started to inspect the TouchFLO. Boy, this is going to be another set of sleepless nights.
Click to expand...
Click to collapse
I can smell TouchFlo on our MightY AtoM soon
Simple steps on howto
1. download the kitchen Download
2. download Prophet Touch X rom Get it here
3. extract Kitchen and Prophet Touch X to separate folder
4. Place the OS.nb from Prophet Touch X in the rom folder of the Kitchen
5. run Buildos.exe and choose what to include (the marked apps are the once that are in Prophet Touch X) press the green play button and wait for it to finish
6. run CreateROM.bat (if there is any error the you have included to much in the Buldos prosess)
7. if there were no error the new OS.nb is in the temp folder move it to the Prophet Touch X folder and overwrite the os.nb in it
8. flash any step 1 WM5
9. now Flash your new rom within Prophet Touch X folder
if everything is done right you should have your new coocked rom on your Prophet
I have put all the things that should not be removed into the SYS folder so do only make changes to the OEM folder till you know more about cooking .
replace the HTC Audio Manager with this one
View attachment OEMAudioManager.zip
New HTC Album with folder option
View attachment HTCAlbumFolderOption.zip
Extras and links
I'll upload some addons for the kitchen later on as I've made more OEM packs
You can also search for oempacks to include but be aware that some OEM packs are device depented
Some cool tools that I use but have not included in kitchen You'll need to understand what they do before using them
HyperCore Kitchen cool for dumping roms and building ( I use it for dumping)
this is great.. awesome.
Great job Gullum. Now guys, we all should start frying Hokienmee or Char Kueh Teow (both chinese cuisine)
geney said:
Great job Gullum. Now guys, we all should start frying Hokienmee or Char Kueh Teow (both chinese cuisine)
Click to expand...
Click to collapse
I like both of them..LOL..
Really love this kitchen...
Thanks man, you are great!!!
It'll be even better if have a list of what those things really for. I do not know which box to check and which one is not
Maybe I'm too new for 'cooking'
geney said:
It'll be even better if have a list of what those things really for. I do not know which box to check and which one is not
Maybe I'm too new for 'cooking'
Click to expand...
Click to collapse
hold the mouse over one of the options and there should show and explaination for most of the items
good news
i'll try it
for every change in X and flashing it, is it always necessary to do step 1 again (wm5 flashing) ?
When I do hard reset and at the "tap screen to go on" point, I could start flashing X too ?
What I mean, is the complete rom exchanged when I flash X, or do some parts from wm5 or old X (IX, VIII ....) remain ?
I've try to cook today.. BUt seems something is going wrong...
Better I flashed it back to the original touch X ROM...
I also had some bad luck with cooking.
I did everything gullum said, flashed 'new' TouchX, did hard reset and then when its time to see welcome screen and 'press any key.....' there is blank white screen! Nothing happens no matter which button i press! Any ideas?
mcupurdija said:
I also had some bad luck with cooking.
I did everything gullum said, flashed 'new' TouchX, did hard reset and then when its time to see welcome screen and 'press any key.....' there is blank white screen! Nothing happens no matter which button i press! Any ideas?
Click to expand...
Click to collapse
I did the same think.
At my case, i have enter today screen.. But I think, its programs don't install clearly.. (hard reset don't help either.)
The first screen is the same one as you.. The white one.. Maybe you should to try ask Gullum again..
I just flash back to Touch IX with another Ext ROM. QuickMenu in that ext.ROM
thanks gullum
I would like to translate this rom to Portuguese can you give some advices? our some tutorial to do that, please? can i do that with this soft?
best regards
thanks (for this perfect kitchen) gullum ,some 3 questions i have :
1.>how to get oem or make one ,and
2.>how to get .dsm , .rgu files of my favorite software . and
3.>how do i make registry changes prior to build os are they automatic
Note :ext_rom files attributes should be read only since its like that in original rom so i made them read only(i think its healthy for system files any virus won't be able to modify it unless the file needs to be appendable updateable it should be read only),plus i deleted alot of thumbs.db files lying in many folders (about >2mb) just to clean oem folder files off thumbs.db i know winxp might be making them all the way .
i corrected audio manger with this kitchen (its gr8),i can't seem to solve camera album (have solved solution given below )problem ,it seems to have come back you know i can't use gestures , what to do ,any reg setting solution.
Edit : **corrected** the setting in reg hklm\software\htc\htcalbum\cacheserial to 2130706432
and hklm\software\htc\htcalbum\default_viewer to 0
if it still don't get solved set first 11 enteries (h_enable to v_pos) value to 0 in
hklm\software\htc\htcalbum\touchscroll\htcalbumclass
i'll try to provide a cab but this forum has alot of intelligent members
BuildImgfs
whatever I include in the buildos I am facing the same error when I try to create rom; something about BuildImgfs
any help guys!!
ma3ayta said:
whatever I include in the buildos I am facing the same error when I try to create rom; something about BuildImgfs
any help guys!!
Click to expand...
Click to collapse
2 reasons 1.> i hope you are pressing play(top left in build OS)button after whatever you choose,with what ever you want in it.
2.>your file size has to be limited its almost full with this kitchen so you have to remove some item like voice dialing (which i seldom use) or some other item removed before you add some item since size dependency is very important here ,and later run create rom .remember you cannot select everything because of space limitation .
Hello Gullum
I'm trying to do very basic thing adding Windows Live package into the OS.nb but it fails during CreatROM.bat. At BuildImgfs.exe the application BuildImgfs.exe crashes and show the error message and whether to send a report to MS or not (I don't send...).
I just directly add Windows Live to your OS.nb. Is it already fully loaded? Should I remove something before?
question with task manager
something is wrong with task manager.
in control panel ,its setting doesn't work!
Same problem.
Whatever i select in buildOS, BuildImgfs crashes.
Last records is CreateROM.bat window is:
Processing "Painting.gif" as file
Processing "S5K3BAFX.dll" as file
Processing "3aca900a-0834-11dc-8314-0800200c9a66.dsm" as file
Processing "c7dbe475-1d17-4fbf-a63e-af6dc042569a.rgu" as file
Processing "c7dbe475-1d17-4fbf-a63e-af6dc042569a.dsm" as file
Processing "-жE+-A+?.txt" as file
I think reason in strange file name -жE+-A+?.txt.
BINGO!!!
I Found this file in Prophet Touch kitchen.
\\OEM\Quickmenu\-жE+-A+?.txt
Just delete it before kitching.
Let's pretend I'm new to windows mobile. (I am). Can anyone tell me HOW I get to these HKEY directories that everything is edited in. If anyone could give me a step-by-step instruction on how to install or modify anything at all in the phone, I would greatly appreciate it.
Please start the steps right after the 'Turn on phone' step, as I am fairly confident I have that under control. Every time I've asked this question on other forums I just get links to different forums with no helpful information below a certain level of expertise. I have never coded or done anything other than drag and drop folders, etc so a dumbed down version of how to start and I can learn from there. Anything! PLEASE!!! I hate having this amazing machine and not being able to utilize it.
oh, Touch Pro, sprint
First you need to install a registry editor. The two most used are PHM (free http://www.phm.lu/Products/PocketPC/RegEdit/) or Resco Explorer (paid http://www.resco.net/pocketpc/explorer/). I prefer Resco, but everyone has their own pref.
And installation, you fire it up and simply navigate it to your registry. Pretty straightforward.
I downloaded the free one but it isn't showing up in my phone. I navigated to its folder on my pc and everything seems to be zipped. when I unzip the file extensions are *.001 and I can't open or access them. am I doing something wrong ?
also, if anyone can explain to me how to install .net framework ?
warrenmrogers said:
also, if anyone can explain to me how to install .net framework ?
Click to expand...
Click to collapse
i assume you need the new 3.5 .net compact framework.
http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
You simply download and install the file on your computer (not your mobile device). This file will install the framework on your computer and will activate the add/remove programs on the sync center, so the next time you connect your touch pro it will ask to install the program. Then you just follow any instructions displayed on your touch pro for final installation and you're set to go!
here's on .Net http://www.fuzemobility.com/?p=470
It has an extra app to choose a default .Net.
There's also a Tips and Tricks section and a walk through for TouchFlo3D at fuzemobility.com that you may want to try.
I can relate to this problem.
warrenmrogers said:
Let's pretend I'm new to windows mobile. (I am). Can anyone tell me HOW I get to these HKEY directories that everything is edited in. If anyone could give me a step-by-step instruction on how to install or modify anything at all in the phone, I would greatly appreciate it.
Please start the steps right after the 'Turn on phone' step, as I am fairly confident I have that under control. Every time I've asked this question on other forums I just get links to different forums with no helpful information below a certain level of expertise. I have never coded or done anything other than drag and drop folders, etc so a dumbed down version of how to start and I can learn from there. Anything! PLEASE!!! I hate having this amazing machine and not being able to utilize it.
oh, Touch Pro, sprint
Click to expand...
Click to collapse
I have a Alltel HTC Touch Pro. The software that came with it does not work with Vista. I googled active sync for Vista, I got links to Windows Mobile Device Center. I installed that onto my desktop. It syncs my phone to my desktop, but only shows my device memory and the storage card. I have installed downloaded and installed net.frame. When I downloaded Advanced Config Tool and draged and drop (also copied & pasted) into the device memory and tried to click the cab. file it only shows that it will go to the c: drive on my desktop. I do not see anything showing for the windows on my device. Hopefully someone can post some useful infomation about this. Yes I did use search, that lead me here. There are lots of complete noobs. Before we can add useful information for others. ( like showing off the really cool function of these new phones we have to be able to use them ourselves. Thanks for any help.
Here's some tips that might help you:
When plugging your Touch Pro into your PC via USB, you should be prompted on the Touch Pro whether you want to connect as "ActiveSync" or "Disk Drive". You should click "ActiveSync" for installing applications.
If you are using your desktop PC and download an application for your Touch Pro, it will typically be .exe or .cab. The .exe files are intended to run on your desktop PC first, and will then trigger an installation to your Touch Pro through ActiveSync (Windows XP) or Windows Mobile Device Center (Windows Vista).
If the file is a .cab, it is intended to run on your Touch Pro directly and will install the program. To move a .cab to your Touch Pro, you use the explore feature in ActiveSync (or similar feature in Mobile Device Center), and drag and drop. (Alternatively, you can download .cab files directly onto your phone from the source website using the Opera web browser). Once the .cab is on your Touch Pro, you use the file explorer program on your phone to naviagte to the file and then execute it.
When you install programs onto your TouchPro, a dialogue appears on the phone to walk you through the installation. To save your phone's shared memory, you can install programs to your memory card. Unfortunately, some applications work best when installed onto the phone versus installing them onto the memory card.
Hope that helps
Thank you very much for your reply. I'll give this another try. I had the Alltel HTV Touch Flo awhile back and was running XP on the desktop. If I remember correctly, I saw my device in the tree layout with the software running XP. I gave the Touch Flo to a family member and got a BlackBerry Curve. Wanted to go back to a windows platform for the versitilty of programs. I know everything has a learning curve to it. With lots of reading and study, trial and error, and help from generous people here. Noobs like myself can get a lot more use and enjoyment from their devices. Each new version that comes out is getting faster, more powerful, and has more features. Others see these things that we have and want one. It would be helpful if we could help them to see all the possibilities that are there. The I Phone gets a lot of attention with commercials and has opened up for new apps being developed. There are as many, if not more apps for widows. We just have to learn to implement them with our device. I know I did not start this thread, but others can see the original posters title and understand their, and my question. Thanks again to the reply, and to anyone else who comes up with more help for the noobs.