Hi, I used Wizard Service Tool to unlock SIM
So this was done this way --->
Reading CID block...
Calculating CID block sum...
CID checksum: B2EEFBE9
Decrypted stored sum: ED9021856636CABE
Decrypted calcd sum: ED9021856636CABE
Key index : 72 - Block index: 184
CIDkey: ЂЪO˜ЕYO^
CID IMEI: **************
SIM lock status: 0100000000000000 LOCKED
Lock #1 in use.
Detecting SPL version...
SPL version: 2.21.Olip
DOC chip is write-protected!
By inserting my SIM it srarting to search the network hour by hour.
So plz help me solve this problem.
P.S.
I have T-Mobile MDA-Vario
P.P.S.
I've insalled WM 6.5 HD...
Related
Hi everybody
Im new here and have no experience with my new TYTN.
So i tried upgrade on 838PRO HK_ENG_WM6- first i unlock cid & sim THEN SEE IPL 1.04 AND SPL 2.30 OLIPRO and after start flash with dopod rom.
After 15 percent tytn stopped and lost connect with sync centre - my PC running under WIN XP - so now is device totally dead and boot no go trough win mobile logo screen JAST GREEN LED DIOD -
it looks like LOSE super CID and my boootloader change and now ipl 1.04 and spl 2.03 NOW WHEN GO IN BOOTLOADER AND MTTY command:
Cmd>task 32
CID: Wait interpreter timeout
Level = FF
Cmd>info 2
HTCSF kEØ(HTCE
Cmd>
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.03
Built at: Jun 16 2007 01:57:22
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x5
----------------------------my bootloader is changed...HELP PLEASE i try all metod more then 20rom flash ..sd card....how to fix this.
other flash by ruu is not possible by error msg - invalid vendor id and stack in 1% and sd card not work just always see not allow!!! .
if anybody got idea to fix it - please send me a post. Very thanxful.
Hi frnds
my G4 was working fine but once while accessing GPRS it go hang so i restart my device but only boot loader mode.. i try many rom but G4 dint repair then i use hard spl and flash with
here is detail for my G4 "WM5_AKU3.3_Crossbow_BETA" then my G4 alive but only one problem now i've main battery didnt get charge with original charger its how in power status "main battery unknown" so i try my frnds battery but same problem my battery working fine in his G4, how to solve this problem before flashing my phone all working fine.
i also try "Xion_WM_6.1_GER_v0.4" but same problem can any one help to solve this problem "Main Battery Unknown"
here is the detail for my G4
Code:
=> Bootloaders:
IPL: 2.16.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 15671FARIA.3.5)
ROM: 3.8
Registry AKU: FARIA.3.5
Radio: 02.47.21
Protocol: 4.1.13.24
=>Extended_ROM:
Version: 2.20.7.114
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
cfb7d682 - 489.37M (0x1e95ee00)
ae9dc342 - 9.99M (0x9fd800)
4ea9a13a - 43.24M (0x2b3e000)
4fb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
6fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000da1e0107253302510104061f
Key Index: 23
Get another Radio ROM and flash it, it should solve your problem.
starkwong said:
Get another Radio ROM and flash it, it should solve your problem.
Click to expand...
Click to collapse
thnx bro..
if u i'll try and post the result here
i have same problem.i flashed it.But same problem continue...
Please check battery pins in your PDA, may be dusty or wrong or deflected
Hi.
here is the detail of my G4 when it is working fine
Code:
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 35638400**********
=> Bootloaders:
IPL: 2.16.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 15671FARIA.3.5)
ROM: 3.8
Registry AKU: FARIA.3.5
Radio: 02.47.21
Protocol: 4.1.13.24
=>Extended_ROM:
Version: 2.20.7.114
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
cfb7d682 - 489.37M (0x1e95ee00)
ae9dc342 - 9.99M (0x9fd800)
4ea9a13a - 43.24M (0x2b3e000)
4fb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
6fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000da1e0107253302510104061f
Key Index: 23
but it show unknown main battery so i flashed it with spl 3.08
now it show only
IPL 2.16.0001
SPL 3.08
i flashed it with many other roms but not ableto repair my G4 can anyone tell me how to solve my problem..
thanx
you have flashed it with a g3 spl and now you are screwed, your ipl is g4 your spl is g3 , thats not good. I doubt you can repair it yourself. I dont know of any remedy to this except sending back to the manufacturer
Very Very true what scousemartin has said,there's no remedy,its a Gonner!
Bad luck!
this problems comes form my stupid mistake....
but it happen due to spl 3.08 g3(s/w) flashing so may be there is some ways to repair if anyone know let me know..
i was **** by myself..
thnx
are you still able to power on your device and get to bootloader to allow flashing? find a rom that contains g4 ipl and spl flash that, its worth a shot if you can stil flash.
Hello
any other ideas in how to repair this problem?
I just grab a Wizard 100 from a friend that was playing with a new ROM an now is in the RGB screen and the IPL is 2.21.001 SPL 2.28.001.
When it power on you can seen the Wizard Love screen and then it goes to the RGB screen again.
I tried to run the Wizard Love ROM again but it do the same.
Thanks for the help or if any can refer to another threat.
Download and flash official stock rom to recover.
Deleted double post !
Hello,
i've bought this device from somebody. There is already another rom installed.
But i like to install another one.
I've lookt already in allot of post but it's always for installing from a original rom.
Are their any special things i have to do?
I've been looking also for programs for vista. i've found some but i cant run them.
Now i've reinstalled xp. What programs do you recommend to me to instal a new rom. and what are the specifiek steps i have to pass.
Thx for the help
ipl 2.21.0001
spl 2.21.0lip
ps. my english isn't verry good
Which rom is running at present,is it official wm5 or custom build wm6 ?
download WST_4.2.2 tool and run 'Device Info' and 'CID Action' button to get the vital data of the phone and post it here.
Wizard Service Tool v4.2.2
07/09/08 09:11:43
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384008658161
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
Registry AKU: .1.0.2
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: AMP_Vanilla
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
6e9d5152 - 9.99M (0x9fd800)
6eae2902 - 43.24M (0x2b3e000)
efb26b52 - 50.13M (0x3220000)
efb26982 - 3.06M (0x310000)
efb2692e - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000170501010c1f0fb115030696
Key Index: 25
All Done.
Reading CID block...
Calculating CID block sum...
CID checksum: 77D29C2F
Decrypted stored sum: C46E0673CB3C0C58
Decrypted calcd sum: C46E0673CB3C0C58
Key index : 25 - Block index: 146
CIDkey: 2BßO©Ö
CID IMEI: 3
CID: WIZQTK01
Phone is CID LOCKED!
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
Grrrrrr8 !!!
Your phone is already 'HardSPL',there's no need to do any other procedure,just download any wm6 or wm6.1 latest custom built rom,hook up the phone with pc via usb cable and run the downloaded rom,it'll start to flash,let it complete 100%,the phone'll reboot and load the newer rom.
Don't ever flash any official,as your phone is HardSPL,it'll get Bricked,coz official roms contain IPL/SPL in them,ok
Hi Experts
My Phone is Advantage X7500 .I Tried to change (upgrade) my rom version (AP 4.0 Platinum) cause it's speed is very Low.
In Bootloader is see this Information :
Athe400
IPL : v2.02
SPL : V3.65 Olinex
And This is The Device Information :
ROM Version : AP 4.0 Platinum
ROM Date : 11/09/07
Radio Version : 1.58.00.00
Protocol Version : 32.91.7020.20H
And The Identity Tab In Device Information :
Model No : ATHE100
Why In The Bootloader wrote ATHE400 And In Device Information ATHE100?
Now I Downloaded Michy 6.0 ROM (windows Mobile 6.1) with SPL 3.5 and Tryed to Install But After 1% The Error [244] : INVALID MODEL ID Shown What do I do ?
Please Help Me
These are The Pictures Of My Phone Details
Please Help
i have same problem
hi i have same problem . my x75oo is dead i try lot of rom it didnt work same bady help us
mansoor2fx said:
Hi Experts
My Phone is Advantage X7500 .I Tried to change (upgrade) my rom version (AP 4.0 Platinum) cause it's speed is very Low.
In Bootloader is see this Information :
Athe400
IPL : v2.02
SPL : V3.65 Olinex
And This is The Device Information :
ROM Version : AP 4.0 Platinum
ROM Date : 11/09/07
Radio Version : 1.58.00.00
Protocol Version : 32.91.7020.20H
And The Identity Tab In Device Information :
Model No : ATHE100
Why In The Bootloader wrote ATHE400 And In Device Information ATHE100?
Now I Downloaded Michy 6.0 ROM (windows Mobile 6.1) with SPL 3.5 and Tryed to Install But After 1% The Error [244] : INVALID MODEL ID Shown What do I do ?
Please Help Me
Click to expand...
Click to collapse
Athe400 is the id for the athena x7510 which is a different hardware
You could try cmonexs solution to access the phone via mtty to change it back to the correct ID.
I am assuming you were totally correct in saying you have an athena x7500 with the microdrive.Check against the photo in the wiki.