Hello,
I have a Jabra BT 3030 headset with keys like "play" "forward" "pause" "louder" ect. I use pocketplayer for listening
It connects and I can hear music and even can use the buttons for increase decrase music.
BUT ALL other buttons ALWAYS start the blood.. windowsmediaplayer.
PLEASE HELP, there MUST be an option somewhere where it says, if bluetooth blabla start the mediaplayer. But where can i find it?
It is NOT advandedconfig-tool and keymappings.
P.S. In EnergyROMThread isn´t any solution nor can anyone help
Thx.
os version 5.2.21901 Manila 2.5.20121225 ROM 23.4.10 WWE
Hi try these drivers for the Jabra BT 3030.
They work on my TD2 and all buttons work as they should.
Have phun!
Related
I've been playing around with my XDAIIi today and finally got music coming from my Jabra BT250.
Pressing the answer/end button on the Jabra toggles the sound to the headset and back to the XDAIIi.
At the same time I get my Tom Tom voice over the music!
The sound is not great, certainly not Hi-Fi though this, I guess, is mainly down to to the headset.
doesent work with me...
XDAIIi hardware+drivers support voice dialing over BT and playing audio. It was written in specification.
It is impossible to make these drivers work on normal XDAII or XDAIIs devices.
That's too bad for 2s user!
how did you get this to work as on my XDA2i i cant get it work, mainly the tomtom voices i am intrested in, not fussed about the music side
Thanks
John
I don't like answers like the one I'm about to give you and it's all I have.
I was on a call and ended it with my Jabra headset button. I then pressed the button again as I wasn't certain it had ended and I got the Tom Tom voice. I then played some music and that came through as well.
Now I can switch between XDA sound and Jabra sound just by toggling the headset button.
I haven't done anything with settings or patches. I got it quite by accident. If you want any info on my settings just ask but I'm sure they are all default.
The only thing that had changed between not getting it and getting it was the installation of Microsfot Voice Command, which is probably the best bit of s/w I have used. I don't know if this is a factor or not.
Thanks Mindraceing, are you useing Voice comands v1 or v1.5
Thanks
John
I'm using 1.5 UK version.
I have i-mate PDA2k and Plantronics 510 http://www.plantronics.com/north_america/en_US/products/cat1150057/cat5420035/prod5360004 bluetooth headset that is really cool.
The problem is that I can't find any way to make PDA listen to headsets microphone and to play sounds through it :-( When I press and hold the button on the headset I hear <beep> and the icon on PDA changes from headset to something like headset making sound. In the headset I hear very quiet noise. Thats all. All sound are still playing through the PDA and headsets microphone is ignored :-( I also tried Cyberon, Vito Voice2go and Voice dialer - no success with headset.
Is there any way to make it work?
PS Latest official firmware on PDA2k (1.40, not WM5) and latest bluetooth drivers (3900)
Ok so I have a Motorola H3 headset and am trying to use it with my X01HT. I have it paired up and it brings it up as a hands free device. I have LSVW WM6(4/08) w/ new A2DP driver. Ok anyways, I could listen to music on the headset when it was paired with my Compaq H6315 yet it won't work with the X01HT. Does anyone know of a possible fix?
I have the same question that is X01HT support A2DP profile? I am preparing to buy a headset.
Well the thing is, if I push the button on my headset it opens the voice shortcut program, and if I have WMP in the background playing a song it will switch from speaker to headset for about 2 seconds and then go back to the speaker. This tells me it should be able to stream music to the headset.
Hi!
Yesterday I went through the upgrade of the official Dutch HTC Europe WM6 release. No problems there and WM6 works a charm.
The problem came to the light when I paired my Motorola HT820 A2DP headset. The music in the Windows Media Player plays well through A2DP, but only for a few seconds. After that it starts pausing every second. The same goes for all types of audio I play (video, TCPMP, etc).
Who can help? There was no problem using WM5 and a previous WM6 ROM (unofficial and WWE).
Thanks!!
Sounds like your sampling rates are off. Check this thread for info:
http://forum.xda-developers.com/showthread.php?t=308752
Search on Priority256_fix. That seems to be the final piece of the puzzle to fix the blue tooth problem.
nrm said:
Search on Priority256_fix. That seems to be the final piece of the puzzle to fix the blue tooth problem.
Click to expand...
Click to collapse
Or search on Bluetooth Priority Fix.
Thanks for the tips.
Ofcourse there will be always another problem: my Motorola A2DP headset now fails to autoconnect (after being paired) to the X7500. Normally when I turn on the headset you will see a headphone/musictone icon in the top bar and hear the "connect sound" through the headset. This doesn't happen now. I need to soft reset first, and after that it will work again, for a few times.
Deleting the headset and pairing again works, but the autoconnecting stops working when I try again later.
Damn, what is it with the official WM6 and A2DP?
apd said:
Or search on Bluetooth Priority Fix.
Click to expand...
Click to collapse
Hi, I still experience lags and pauses while using A2DP. With the registry tweak Priority256 it even gets a lot worse!!
Any more suggestions? I tried several headsets and even the Parrot Sound speaker set, but all of them are the same. So it's not the headset.
EDIT: I figured that it has something to do with the normal Bluetooth headset I use. I want to use the A2DP stereo headset simultaneously with the normal headset for phone calls. The A2DP headset only uses "Stereo audio" when connected, while the normal headset uses "Headset". This was no problem at all with all other devices I had and no problem as well on the X7500 running WM5. With WM6 things are different I guess.
A2DP WITHOUT the normal headset connected is no problem, like it should work. WITH the voice headset connected simultaneously, the lags come up, the prioriry fix makes no difference in this matter. And I'm stubborn, I want to have the voice headset to be connected at all times, the A2DP headset when I want to listen to music.
Any thoughts?
Hello,
I bought a Jabra BT3030 lookalike, expecting to use it to control the Blackstone, which will have wired headphones connected directly to the 3.5 jack (best sound quality, convenience of a remote, and I expect long battery life).
However I cannot get the sound to come through the headset if the remote works. It looks like if a stereo headset is connected, all sound will be sent to it (if I connect the headset to the BT receiver, it works fine).
I tried switcha2dp but if I switch off AD2P, the remote stops working.
I hoped to use only the AVRCP profile when pairing, but that is not an option (I only have "handsfree" or "wireless stereo", "handsfree" does not work for music/remote).
Can anyone offer any advice? I'd like to disable AD2P while keeping AVRCP but I can't seem to find a way...
Thanks,
Did you ever find a solution to this? I am in the exact same situation