hello,
i am trying to upgrade to insomnia rom . so i upgraded the rom Radio: to 1.65.28.25 then i flashed it to hard spl 1.22 confirm by holding camera button + power button and it shows spl 1.22 on the tri colour screen.
i noticed the camera doesnt work , meaning it loaded the app but the view finder was just black . so hard reset it To no avail . then i thought it may be corrupt radio so i reflashed it with Radio: 1.65.28.25 which still didnt work . so i tried a newer radio 1.71.09.01 with a hard reset to no avail
so I was panicking and I couldnt remember my original radio versoin but I knew it was along the lines of 1.58.xxxx so I reflashed it with RUU Nike Radio 1.58.21.23S Modded (Save Power and have better Network Connection!) "Highly Recommended" .
Now my camera is working. my concern I dont want to be flashing insomnia rom if requirement is radio vers 1.65xxx plus which renders my camera in operative????
cv65user said:
hello,
i am trying to upgrade to insomnia rom . so i upgraded the rom Radio: to 1.65.28.25 then i flashed it to hard spl 1.22 confirm by holding camera button + power button and it shows spl 1.22 on the tri colour screen.
i noticed the camera doesnt work , meaning it loaded the app but the view finder was just black . so hard reset it To no avail . then i thought it may be corrupt radio so i reflashed it with Radio: 1.65.28.25 which still didnt work . so i tried a newer radio 1.71.09.01 with a hard reset to no avail
so I was panicking and I couldnt remember my original radio versoin but I knew it was along the lines of 1.58.xxxx so I reflashed it with RUU Nike Radio 1.58.21.23S Modded (Save Power and have better Network Connection!) "Highly Recommended" .
Now my camera is working. my concern I dont want to be flashing insomnia rom if requirement is radio vers 1.65xxx plus which renders my camera in operative????
Click to expand...
Click to collapse
I think there went something wrong with your radioflash, I'm not sure what you did wrong but I think you have to try it again and I think then it is working, if not I suggest to flash the htc 2.16 rom, it includes the 1.65.22.29 radio in it and after that flash, you can flash the insomnia rom again.
Greetz,
BTW You can find the htc 2.16 rom in my 4shared folder, just click on it.
but surely two newer radios cannot be at fault or even hardware fault. could it possibly the fact my stock t mobile mda rom cannot interact with newer radio rom ?
should i download RUU_Nike_TMO_UK_2.06.110.2_Radio_NikeMR_1.65.28.25 _signed_Ship.exe is this the original t mobile uk mda touch plus ?
update i just re downloaded RUU_Nike_Radio_1.65.28.25 . but same prob lem . the camera app loads but its just a black viewfinder cannot find the camera . but if i reflash back to radio rom 1.58.xxxx . camera works fine ????
update i just re downloaded RUU_Nike_Radio_1.65.28.25 . but same prob lem . the camera app loads but its just a black viewfinder cannot find the camera . but if i reflash back to radio rom 1.58.xxxx . camera works fine ????
cv65user said:
update i just re downloaded RUU_Nike_Radio_1.65.28.25 . but same prob lem . the camera app loads but its just a black viewfinder cannot find the camera . but if i reflash back to radio rom 1.58.xxxx . camera works fine ????
Click to expand...
Click to collapse
Really strange, the only thing I can think about is that your radio is corrupted or you have downloaded the wrong radio which is not made for the Niki, just try to flash the 2.16 rom, you can find him HERE it has the radio included and I can confirm that the radiorom in that rom is working with insomnia's roms.
Hope this will solve your problems.
Goodluck and greetz,
just to clairfy mines the t mobile mda touch plus with slide out 16 kybd. do you know where the original t mobile mda touch plus rom is for download ? just in case i need to flash back ?
cv65user said:
just to clairfy mines the t mobile mda touch plus with slide out 16 kybd. do you know where the original t mobile mda touch plus rom is for download ? just in case i need to flash back ?
Click to expand...
Click to collapse
You can find the shipped roms for the Niki HERE, thanks to conflipper.
And again goodluck and I hope you can solve your problem.
i finally install the rom . its awesome a big difference from stock t mobile rom ..now about the insomnia rom , i installed 16 key because i got 0-9 and a text button, www, backspace and text message button right ? and i also installed the ABC over T9 CAB.
it seems if i am texting - when i want to use the keypad if i slide it up the touch screen gets disabled ? if i try to text in T9 it remembers the errors ? it seems the keys are not mapped properly. its always stuck in T9 mode althogh the visual keyboard display slider is slid over to ABC ? so i went to T9 options and un ticked all the auto fill .
should I have installed the 16 or 20 key cab?
edit yes it confirms it seems if my screen is slid up the keypad is disabled? ie. when i slid up phone it will not let me screen unlock until i slide the screen back down .
thank for your guidance rataplan
cv65user said:
thank for your guidance rataplan
Click to expand...
Click to collapse
You're welcome buddy
Related
ROM version:1.23.70.2
ROM Date: 08/14/06
Radio version: 1.06.04.00
I uploaded here
http://rapidshare.com/files/942270/SPV3100_Orange_1.23.70.2_WWE_1060400_SHIP.ace.html
can you upload elsewhere!
thanks
I am uploading this ROM at this time. Will post when done.
hi
is this the stock rom or the upgrade rom?
thanks
zohaer21 said:
hi
is this the stock rom or the upgrade rom?
thanks
Click to expand...
Click to collapse
Sorry have no Idea. I just got the file from Rapidshare to put on the wiki.
Its done.
HER_ORRO_123702_1060400_WWE_SHIP.exe is the file name.
Update did not work
Hi all,
I just tried to use this update however it did not work. It said something about invalid operator?? It is an Orange M3100...
Any tips?
Dave
It is the WWE update from orange; if you have a bootloader >=1.06 it will only setup on a device having a CID matching ORANGE_001 or something like that. As far as I know there are different CID for each contry, an french device will have something like Orange_203 for CID.
Upgraded ok on an M3100. - Mine was unlocked with imei-check v3 so my CID was 0 anyway, but I suspect it would have been fine.
Versions are now:
Operator version: 14.123.10.702
ROM Version: 1.23.70.2
ROM Date: 08/14/06
Radio version: 1.06.04.00
Protocol version: 32.37.7010.01H
OS Build: 14955.2.3.0
It left my bootloader at version 1.04 (possibly this could be handy for people with M3100s who have tried to install an image with bootloader v1.06?)
Interestingly though it set my CID back to HTCSORANG001 and set my privilege level back to FF, however the phone remained SIM-unlocked. I switched to a T-Mobile SIM (I have a dual-sim adaptor) and it worked fine.
Re-run imei-check v3 and it set my CID to SuperCID and priv level to 0 again.
Seems fine so far. Of course it's only been up 10 mins....
I CANT SEEM TO FIND THE ROM!~~
any links
thanks
It's still in Hermes uploads. I don't feel confident enough in it just yet to update the wiki; let's get some confirmation that it's ok.
It appears to originate from Romania btw. When I installed it my regional settings were Romanian and the PIE favourites had Romanian sites in them. Seems to work fine in English though; I had to go hunting to figure out where it was from.
I've re-installed most of my stuff now. No apparent probs so far.
Ok got everything re-installed.
Syncing mail, calendar & contacts OK. PhoneAlarm working OK. Resco Explorer OK. Tried a couple of games OK. TomTom OK. Phone calls OK. Connected to GPRS & Wi-Fi OK. Browsed the internet ok. Java apps OK. Camera OK. Citrix apps OK.
Only difference I've noticed so far is it's been trying to connect to Orange GPRS in preference to Wi-Fi. I just deleted my Orange GPRS settings, since I use my T-Mobile sim for GPRS, so that's fixed.
Updated the Hermes Upgrading wiki, although link for file is to Hermes Uploads.
Pof, I think you can move the file to Shipped_Complete_Updates, when you're ready.
I can confirm that this Rom works an absolute treat. Does appear to be Romainian as the Time zone is set there.
Updated my phone several weeks ago to an Imate Rom, which worked ok but didn't really solve the problems I was having (namely bluetooth). Now have an Orange Rom again so at least I can get the phone swapped by Orange again if I ever knacker it.
Well done one and all for finding this Rom
Is it faster/more stable?
What other improvements?
Does it have MSN Messenger on it?
I can't really say I've noticed it being particularly faster. I seem to have less problems with my Dual-SIM adaptor, but that may be coincidence. Apart from that, it seems pretty much the same.
One hiccup to watch out for; the MMS settings default to using a Romanian server, so if you use this you may need to go to Inbox > Menu > Tools > Options > MMS > Servers and change the settings on the MMS server.
No MSN Messenger. I don't use this, but isn't there an install file for it floating around somewhere?
I had a play with IM, and Agile messenger or IM+ seemed quite good if I remember rightly.
couple of things with the rom:
i had it for 2 days then flashed teh imate telstra rom again due to :
1)the phone got hung several times a day , requiring soft resets
2)it went to sleep mode and didnt wake up by pressing the power button .. again had to soft reset
3)didnt work very with wizbar adv 2
so i went back to imate telstra rom which works flawlessly on my jasjam
also i had no problems like above with any of the other roms (tytn,dopod,cingular) only with this rom!!
zohaer21 said:
couple of things with the rom:
i had it for 2 days then flashed teh imate telstra rom again due to :
1)the phone got hung several times a day , requiring soft resets
2)it went to sleep mode and didnt wake up by pressing the power button .. again had to soft reset
3)didnt work very with wizbar adv 2
so i went back to imate telstra rom which works flawlessly on my jasjam
also i had no problems like above with any of the other roms (tytn,dopod,cingular) only with this rom!!
Click to expand...
Click to collapse
You, discriminator! ...Kidding. Maybe this happens due to the fact that this ROM was meant to work on European networks. It might have some radio incompatibilities with the US networks. Try to separately install the latest Cingular radio (it is available on the xda ftp). I may be wrong about the above said, but in Romania this ROM works flawlessly...
yeah i guess so... will try later..
i used to love orange roms.. due to their very nice and easy to navigate today app..but man in this rom the background totally sucks!!!
totallytechie said:
Updated the Hermes Upgrading wiki, although link for file is to Hermes Uploads.
Pof, I think you can move the file to Shipped_Complete_Updates, when you're ready.
Click to expand...
Click to collapse
Sorry for the delay, I was on vacation the last week without internet connection
The file is now on Shipped_Complete_Updates:
ftp://xda:[email protected]_Updates/HER_ORRO_123702_1060400_WWE_SHIP.exe
I also changed the wiki info because the CID was incorrect, it is ORANG008 (Orange Romania).
zohaer21 said:
couple of things with the rom:
i had it for 2 days then flashed teh imate telstra rom again due to :
1)the phone got hung several times a day , requiring soft resets
2)it went to sleep mode and didnt wake up by pressing the power button .. again had to soft reset
3)didnt work very with wizbar adv 2
so i went back to imate telstra rom which works flawlessly on my jasjam
also i had no problems like above with any of the other roms (tytn,dopod,cingular) only with this rom!!
Click to expand...
Click to collapse
I am having the same issues with the phone getting hung..or won't come from sleep mode. I am rocking the cingular 1.31 rom.
Hi, I’m from a group of peoples whom works in an environment which camera is prohibited. I had tested my Prophet flashing from WM5 to WM6.0, WM6.1 Prophet Shadow 2.0 TE Rom is running smooth and very stable in my Prophet.
Thank-you very much Cloudyfa for your wonderful Rom
As to use my Prophet G3 in my working environment, I had dismantled the camera and test booting up my ppc. During boot up, it hanged at this htc display, done a hard reset and re-boot, it still hanged at this display and it sight like the booting program is searching for something.
Decided to flash back to WM5 NVID and Goodd…. It boot up to WM5 and try clicking on the camera icon, it’s not functioning. Tested it’ functions and connect to GPS every thing works smooth and steady, but not as fast as WM6 Rom and no launcher etc…..
Re-flashed to WM6.0 and WM6.1 Rom, always hanged when boot up in one way or the others . Flashed back to Prophet Shadow 2.0 TE Rom and reboot, it still stuck at the htc isplay page. If look at the booting up window carefully, it show IPL 2.20, SPL 2.20.0000, GSM 02.19.21 & OS 5.2.20.21
To my understanding of the flashing process, the Prophet Shadow 2.0 TE Rom had already flashed in my prophet and rebooted my itself, but hanged at htc display because the process is looking for the camera hardware which I had dismantle out and that why is go round & round until it hanged.
Please correct me, if I’m wrong. Thank-you.
For troubleshooting, can any body provide me a tool (program) and guide me into the nk.nbf file to remove the camera execution file from loading? And with this tool, I can also use it to flash future Rom and enjoy flashing new roms.
Maybe new threads will be form for those who like to have Prophet without camera.
Rewards, I will buy you beer, ha…ha…ha…
Prophet G3 w/o camera
IPL : 2.20
SPL : 2.20.0000
GSM : 2.19.21
OS : 5.2.20.21
Flashed Rom : Transformer 1.1, Shadow 2.0 TE
Prophet G4 c/w camera
IPL : 2.15
SPL : 2.20.0001
GSM : 2.19.21
OS : 5.2.20.21
Flashed Rom : Transformer 1.1, Shadow 2.0 TE
glim59 said:
Hi, I’m from a group of peoples whom works in an environment which camera is prohibited. I had tested my Prophet flashing from WM5 to WM6.0, WM6.1 Prophet Shadow 2.0 TE Rom is running smooth and very stable in my Prophet.
Thank-you very much Cloudyfa for your wonderful Rom
As to use my Prophet G3 in my working environment, I had dismantled the camera and test booting up my ppc. During boot up, it hanged at this htc display, done a hard reset and re-boot, it still hanged at this display and it sight like the booting program is searching for something.
Decided to flash back to WM5 NVID and Goodd…. It boot up to WM5 and try clicking on the camera icon, it’s not functioning. Tested it’ functions and connect to GPS every thing works smooth and steady, but not as fast as WM6 Rom and no launcher etc…..
Re-flashed to WM6.0 and WM6.1 Rom, always hanged when boot up in one way or the others . Flashed back to Prophet Shadow 2.0 TE Rom and reboot, it still stuck at the htc isplay page. If look at the booting up window carefully, it show IPL 2.20, SPL 2.20.0000, GSM 02.19.21 & OS 5.2.20.21
To my understanding of the flashing process, the Prophet Shadow 2.0 TE Rom had already flashed in my prophet and rebooted my itself, but hanged at htc display because the process is looking for the camera hardware which I had dismantle out and that why is go round & round until it hanged.
Please correct me, if I’m wrong. Thank-you.
For troubleshooting, can any body provide me a tool (program) and guide me into the nk.nbf file to remove the camera execution file from loading? And with this tool, I can also use it to flash future Rom and enjoy flashing new roms.
Maybe new threads will be form for those who like to have Prophet without camera.
Rewards, I will buy you beer, ha…ha…ha…
Prophet G3 w/o camera
IPL : 2.20
SPL : 2.20.0000
GSM : 2.19.21
OS : 5.2.20.21
Flashed Rom : Transformer 1.1, Shadow 2.0 TE
Prophet G4 c/w camera
IPL : 2.15
SPL : 2.20.0001
GSM : 2.19.21
OS : 5.2.20.21
Flashed Rom : Transformer 1.1, Shadow 2.0 TE
Click to expand...
Click to collapse
Hey...... did you ever try the simple step.....
remove the sim card?
just brain storming......
Yes, try every methods that i had learn from this thread, from 31/06/08 until now, out of solutions then ask of help
Regards
glim59 said:
Yes, try every methods that i had learn from this thread, from 31/06/08 until now, out of solutions then ask of help
Regards
Click to expand...
Click to collapse
if your prophet still can flash........
did you try intertek's micro V3 rom?
he had removed the default camera (except the camera.dll)
give it a try....... ^^
I removed the camera recently too (G4). Didn't boot either. This has nothing to do with the software, it seems like its in the mobile's firmware (bios).
Instead of removing the camera module, remove the lens! Dead simple. on the sides of the camera lens module there are 4 small metal leaves to prise up. The lens module comes out together with the spring that is underneath it. All you are left with is a cmos. You could possibly put the lens back in later, with a fiddle.... Its now totally useless to take photos with and the security people at your company can see that the camera has no lens when they look through the camera hole at the back of the mobile, which means you'll be OK if they stop you and look at the mobile. So you can't get sacked or carted of the premises.
I work at most of the major car companies in germany, so I have the same problem
Hi, Jellyme
did you try flashing with new rom? did it boot up?
I will download and flashing intertek's micro V3 rom tonight after work
thkx
No, I didn't try a new rom.
I don't think a new rom will work, as my Prophet hung at the HTC Logo, before the OS even started booting. My guess its a Boot ROM thing: It checks for a reponse from the camera chip.
However, I hope you have luck with a new ROM! However, I wouldn't want to be stuck on a particular ROM.... some of them here are just a little too buggy to live with.
jellyme said:
No, I didn't try a new rom.
I don't think a new rom will work, as my Prophet hung at the HTC Logo, before the OS even started booting. My guess its a Boot ROM thing: It checks for a reponse from the camera chip.
However, I hope you have luck with a new ROM! However, I wouldn't want to be stuck on a particular ROM.... some of them here are just a little too buggy to live with.
Click to expand...
Click to collapse
Go for Korand's 3.2 ( wm6.1) stable fast and bug free, its a clean rom with basic features.. ^^
edit: Should be Korand 3.1 ...
> Go for Korand's 3.2 ( wm6.1) stable fast and bug free,
> its a clean rom with basic features..
There are no bug free 6.1 for me. However, most are pretty damn close! It always depends on which functions you need. For some, the 6.1 are bug free, for my particular usage (business) they are good enough, but not bug free. I'm happy with the 6.1 that I use, with the camera lens removed...
The BIOS needs to be told to ignore the camera at startup. Anyone with an idea how to do this?
jellyme said:
> Go for Korand's 3.2 ( wm6.1) stable fast and bug free,
> its a clean rom with basic features..
There are no bug free 6.1 for me. However, most are pretty damn close! It always depends on which functions you need. For some, the 6.1 are bug free, for my particular usage (business) they are good enough, but not bug free. I'm happy with the 6.1 that I use, with the camera lens removed...
The BIOS needs to be told to ignore the camera at startup. Anyone with an idea how to do this?
Click to expand...
Click to collapse
Umm... Does the ROM not boot up at all without a camera (do different - WM5 - ROMs do the same)?
I had tried a few of WM6.0 &WM6.1 without camera, ever intertek's micro V3 rom which removed the default camera (except the camera.dll) advised by dioxda2, It hanged for half a hour at the Front booting display showing IPL..SPL... and showing the ROM version.
As for WM5.0 NVID rom w/o camera no problem flashing and when activate the camera, display flipped and remain normal without having the camera display page.
Thank-you Jellyme for your method, just flashed with camera w/o len last night, but need to flashed 3 times before it able to boot up to Shadow 2.0 TE and it slight unstable when activation of some programs. I will monitor it for a few days.
As for me, re-moving the len from the camera is still no good enough, cause work involve with Military Security. I'm putting my two arms and limbs high up the air , ha..... ha..... ha.....
At the same time, I had also e-mail to HTC service centre to check whether they have any device or dummy camera connector to plunge back on the main board. No reply yet.
Regards
Would completely removing the camera drivers work? Or maybe put some tape over the lens
completely removing the camera, it will boot up to HTC display and then hanged for shadow 2.0T. For the other, stuck Front booting display showing IPL..SPL... and showing the ROM version.
Not adviseable to put some tape over the lens, Security check do not want to see camera in the camera window, ever len is out and still have to place a piece of thick Black paper on the camera receiver to complete cover the shadow of the camera image, in which the camera is still active.
Military security would not clear this conditions of the Prophet or camera phones.
It may be possible to cook a ROM with no camera drivers at all... That way, it wouldn't work at all...
> It may be possible to cook a ROM with no camera drivers at all...
> That way, it wouldn't work at all...
Thats what we want. Actually I think the Camera drivers have only to be removed from the registry... in case references to them are found there. Then the camera drivers should be removed.. or a dummy camera driver written that just has the required interfaces and returns OK at every call, if removing the camera drivers doesn't work.
Maybe getting the driver from a WM phone without a camera or from WM 5.0?
jellyme said:
> It may be possible to cook a ROM with no camera drivers at all...
> That way, it wouldn't work at all...
Thats what we want. Actually I think the Camera drivers have only to be removed from the registry... in case references to them are found there. Then the camera drivers should be removed.. or a dummy camera driver written that just has the required interfaces and returns OK at every call, if removing the camera drivers doesn't work.
Maybe getting the driver from a WM phone without a camera or from WM 5.0?
Click to expand...
Click to collapse
I think devices without the camera won't have the drivers at all... I can re cook a WM5 ROM now with no camera drivers/no camera exes etc...
Hi, my guys over here are buying new camera phone like iphone, Samsung i780, Nokia E51i........etc to dismantle the camera or cameras.
Their phone still work without camera.
FYI only
regards
glim59 said:
Hi, my guys over here are buying new camera phone like iphone, Samsung i780, Nokia E51i........etc to dismantle the camera or cameras.
Their phone still work without camera.
FYI only
regards
Click to expand...
Click to collapse
It might just be WM, or even just the Prophet...
It might just be WM, or even just the Prophet...
Click to expand...
Click to collapse
Samsung i780 is using WM 6.0 rom............ FYI
glim59 said:
Samsung i780 is using WM 6.0 rom............ FYI
Click to expand...
Click to collapse
Then it's our Prophets
Hi Guys,
I've been using the ROM from Michy the R4 edition for some days without experiencing any problem and now it occurs that phone function stoped working for unknown reason ! just like that.
Impossible to enter PIN number the connection manager refuse even to open.
I've tried to install different ROM to see if it could change anything but nothing has changed.
I've also no more description of the RADIO I'am using in the about file.
Please help me to save my lovely brick !
i can help u
hi pal i can help u i also had faced the same problem
ur radio board has been dislocated
pm me to make ur baby alive
u an also contact me on phone at +919823291495 or messenger
at [email protected]
What data you have in BL mode ?
callmelolo said:
Hi Guys,
I've been using the ROM from Michy the R4 edition for some days without experiencing any problem and now it occurs that phone function stoped working for unknown reason ! just like that.
Impossible to enter PIN number the connection manager refuse even to open.
I've tried to install different ROM to see if it could change anything but nothing has changed.
I've also no more description of the RADIO I'am using in the about file.
Please help me to save my lovely brick !
Click to expand...
Click to collapse
Hi
Please download the Michy R4.1 and update it it will work. I had the same problem. My advice is "do not use password or pin while you are testing the new rom"
1. Do a hard reset By Vol Down+ reset hole press
2. Get into boot loader By Camera button pressed + reset hole press until you see the tricolour screen.
3. Then flash R4.1
Good luck
Hi Sabes,
I tried to install the 4.1 Rom and it loaded well. I had the boot screen where nothing was writen after the "R" of radio and then I went to the frist setting screen. It then asked to reboot to customize and since that moment black screen. The power led is on and nothing more...
**** ! it sounds like its definitely dead !
I don't understand anything cos I did nothing wrong, no droping, no tweaks, everything was working fine up to some day the phone function stoped working for unknown reason and now I have a black screen.
I have 1.2.
Boot screen shows : Rom = None
I have managed to reinstall the ROM from Michy the R4.1 version and it powers on again.
The problem remain the same = no phone function
When I get to Device Information I have nothing writen after Radio version and Protocol version.
callmelolo said:
I have 1.2.
Boot screen shows : Rom = None
I have managed to reinstall the ROM from Michy the R4.1 version and it powers on again.
The problem remain the same = no phone function
When I get to Device Information I have nothing writen after Radio version and Protocol version.
Click to expand...
Click to collapse
I have a couple of ideas but I would like you to get into the bootloader screen and tell us what you can see there
I have
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20. Olipro
I've been trying the TTY thing but.... :
start NB image download
Fail to synchronize with the host (1)
callmelolo said:
I have
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20. Olipro
I've been trying the TTY thing but.... :
start NB image download
Fail to synchronize with the host (1)
Click to expand...
Click to collapse
I think you have somehow lost your radio or it has become corrupted
Do you have one of the shipped roms?
Try flashing this as i think it includes a radio
even AP3 may have a radio included in the RUU
Flash this while you are in bootloader.
Or you could flash radio 1.58
I've been trying to flash the 1.58 this morning and I was stuck on 0%
I will get to the wiky and try to download the original Rom for my Athena.
Thanks
callmelolo said:
I've been trying to flash the 1.58 this morning and I was stuck on 0%
I will get to the wiky and try to download the original Rom for my Athena.
Thanks
Click to expand...
Click to collapse
Just a thought
have you removed your sim and sd card?
Yes I did...
Just finished downloaded the original Rom I will keep you posted with the results...
Hi all
I've upgraded my touch dual to WM 6.1 chinese official but now the bluetooth chip is not recognized, like the device has bo BT.
I have installed hardspl 1.15 before upgrade to this, is correct?
i've tryed also to restore the original SPL 1.16 and reflash, but no BT again.
I've flashed the original radio 1.58 and the original WM6 TIM branded ita version, but no BT again.
anyone could help me?
tnx a lot!
This ROM needs at minimum the integrated 1.65 Radio! After flashing the ROM, make a hardreset and report back!
the chinese version has radio incorporated in nbh, wich is version 1.65.29.22 (i can see on the startup screen).
of course i have hard reset the device after the first boot (red + green key and reset)
i've tryed the non asia version, RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship.exe, hard reset but no BT again :-(
That's really strange!
I'm sorry but at this point I think I can't help you!
man, i think that i've found the issue.
today i decided to open my nike. Removed the screw and the bottom cover, i've found a scew attached to the speaker, wich has destroyed it (in effect, after a repair from htc, the sound was really bad) and this screw touched with the top metal on the bluetooth board, so, i think that some short circuit have destroyed my bluetooth.
And this is HTC FAULT!!!!
now i have to send back to repair and wait another 3 weeks.
Hi,
im currently running the following setup:
phoenix 2.51
radio 1.71
hard spl 1.22
with o2 as service provider in germany.
since some flashing and testing i discovered that after a few seconds of speaking i get massive interferences in the call. my calling partner cant understand me, but i can hear him.
i already flashed back to 6.1 wwe official rom but the error still persists.
does anybody have ideas which could help me?
RsRichard said:
Hi,
im currently running the following setup:
phoenix 2.51
radio 1.71
hard spl 1.22
with o2 as service provider in germany.
since some flashing and testing i discovered that after a few seconds of speaking i get massive interferences in the call. my calling partner cant understand me, but i can hear him.
i already flashed back to 6.1 wwe official rom but the error still persists.
does anybody have ideas which could help me?
Click to expand...
Click to collapse
Try a different radio, eg 1.65.28.25. Works very well, and low power consumption to boot.
use other radio rom
I had the same problem.
Many noises, people on the other side couldn't hear me as well as dropping line.
I also tried different combination in spl/rom/radio (also restoring original spl/rom/radio).
I solved by sending phone to service reparing (warranty).
I don't know exactly what they did since ther was no physical repair but they said they only upgraded something (which sounds strange to me since ther's no official upgrade for my country from HTC) but now it works fine.
shinji_73 said:
I solved by sending phone to service reparing (warranty).
I don't know exactly what they did since ther was no physical repair but they said they only upgraded something (which sounds strange to me since ther's no official upgrade for my country from HTC) but now it works fine.
Click to expand...
Click to collapse
So, what's the build number of ROM and also radio number? If it is one not on the board, any chance of dumping the ROM and posting it?
i tried with 1.5xx roms, 1.65.28.25 etc. and still have the problem.....
rling said:
So, what's the build number of ROM and also radio number? If it is one not on the board, any chance of dumping the ROM and posting it?
Click to expand...
Click to collapse
Rom version: 1.31.408.09
Date rom: 10/30/07
Radio version: 1.58.16.27
Protocol version: 25.61.30.03W
It seems to be the "standard" configuration...
But now on the splash screen there's no more "Niki pro" trace...D 1.31 as it used to be.
ok... i again tried several configurations and also flashed the complete original rom. the error still is there what can i do now? is there any possibility to format the whole phone except the bootloader?
heeeeeeeeeeeeeeeeeeeeeeellllllllppppppppppp
RsRichard said:
ok... i again tried several configurations and also flashed the complete original rom. the error still is there what can i do now? is there any possibility to format the whole phone except the bootloader?
Click to expand...
Click to collapse
The radio, SPL and ROM cover the entire phone's OS. The official HTC WWE release 2.09.405.1 has all three in it. Disable the Hardspl (if other than HardSPL 1.22) by flashing the sspl, then flash this ROM. This will return the phone to original state. You might need to do this if you need to send the phone back for warranty service.
I'm going to send my phone to service again because I got my problems back...because I definetly think I got some "hardware" problems...
If I shake my phone some metallic noises can be heard inside, did you try something similar?
any news on this topic? i still cant use my niki.... im still receiving massive intereferences when calling since my flashing orgy. how to put it back to a fully OEM state without any mods?
nothing? will i really have to send my phone to the service ..... please not, i damaged one of the guarantee seels (back of the phone, right to the camera) mit the pen once....
RsRichard said:
nothing? will i really have to send my phone to the service ..... please not, i damaged one of the guarantee seels (back of the phone, right to the camera) mit the pen once....
Click to expand...
Click to collapse
it must be radio issue - please try to flash a complete rom+radio, flash from microSD this time, rename the nbh file to NIKEIMG.nbh, enter bootloader and flash.
*push* still not working