Hi,
im currently running the following setup:
phoenix 2.51
radio 1.71
hard spl 1.22
with o2 as service provider in germany.
since some flashing and testing i discovered that after a few seconds of speaking i get massive interferences in the call. my calling partner cant understand me, but i can hear him.
i already flashed back to 6.1 wwe official rom but the error still persists.
does anybody have ideas which could help me?
RsRichard said:
Hi,
im currently running the following setup:
phoenix 2.51
radio 1.71
hard spl 1.22
with o2 as service provider in germany.
since some flashing and testing i discovered that after a few seconds of speaking i get massive interferences in the call. my calling partner cant understand me, but i can hear him.
i already flashed back to 6.1 wwe official rom but the error still persists.
does anybody have ideas which could help me?
Click to expand...
Click to collapse
Try a different radio, eg 1.65.28.25. Works very well, and low power consumption to boot.
use other radio rom
I had the same problem.
Many noises, people on the other side couldn't hear me as well as dropping line.
I also tried different combination in spl/rom/radio (also restoring original spl/rom/radio).
I solved by sending phone to service reparing (warranty).
I don't know exactly what they did since ther was no physical repair but they said they only upgraded something (which sounds strange to me since ther's no official upgrade for my country from HTC) but now it works fine.
shinji_73 said:
I solved by sending phone to service reparing (warranty).
I don't know exactly what they did since ther was no physical repair but they said they only upgraded something (which sounds strange to me since ther's no official upgrade for my country from HTC) but now it works fine.
Click to expand...
Click to collapse
So, what's the build number of ROM and also radio number? If it is one not on the board, any chance of dumping the ROM and posting it?
i tried with 1.5xx roms, 1.65.28.25 etc. and still have the problem.....
rling said:
So, what's the build number of ROM and also radio number? If it is one not on the board, any chance of dumping the ROM and posting it?
Click to expand...
Click to collapse
Rom version: 1.31.408.09
Date rom: 10/30/07
Radio version: 1.58.16.27
Protocol version: 25.61.30.03W
It seems to be the "standard" configuration...
But now on the splash screen there's no more "Niki pro" trace...D 1.31 as it used to be.
ok... i again tried several configurations and also flashed the complete original rom. the error still is there what can i do now? is there any possibility to format the whole phone except the bootloader?
heeeeeeeeeeeeeeeeeeeeeeellllllllppppppppppp
RsRichard said:
ok... i again tried several configurations and also flashed the complete original rom. the error still is there what can i do now? is there any possibility to format the whole phone except the bootloader?
Click to expand...
Click to collapse
The radio, SPL and ROM cover the entire phone's OS. The official HTC WWE release 2.09.405.1 has all three in it. Disable the Hardspl (if other than HardSPL 1.22) by flashing the sspl, then flash this ROM. This will return the phone to original state. You might need to do this if you need to send the phone back for warranty service.
I'm going to send my phone to service again because I got my problems back...because I definetly think I got some "hardware" problems...
If I shake my phone some metallic noises can be heard inside, did you try something similar?
any news on this topic? i still cant use my niki.... im still receiving massive intereferences when calling since my flashing orgy. how to put it back to a fully OEM state without any mods?
nothing? will i really have to send my phone to the service ..... please not, i damaged one of the guarantee seels (back of the phone, right to the camera) mit the pen once....
RsRichard said:
nothing? will i really have to send my phone to the service ..... please not, i damaged one of the guarantee seels (back of the phone, right to the camera) mit the pen once....
Click to expand...
Click to collapse
it must be radio issue - please try to flash a complete rom+radio, flash from microSD this time, rename the nbh file to NIKEIMG.nbh, enter bootloader and flash.
*push* still not working
Related
Hi,
i have one bricked Hermes,and I've tried all the methods that i read ever and i explained completely here:http://forum.xda-developers.com/showpost.php?p=1571302&postcount=1548 but no result.
yesterday i tried SD method with wm6 ROM that i downloaded from htc sit ,but i had this on my screen:
HERMIMG.nbh-
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
it freezes at GSM!!i waited 45min,but nothing changed,then i take out the battery.
do you know why?and what can i do?
sorry for my bad English.
hamed_ppc said:
Hi,
i have one bricked Hermes,and I've tried all the methods that i read ever and i explained completely here:http://forum.xda-developers.com/showpost.php?p=1571302&postcount=1548 but no result.
yesterday i tried SD method with wm6 ROM that i downloaded from htc sit ,but i had this on my screen:
HERMIMG.nbh-
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
it freezes at GSM!!i waited 45min,but nothing changed,then i take out the battery.
do you know why?and what can i do?
sorry for my bad English.
Click to expand...
Click to collapse
Hi I have the same problem, radio refuse to flash, something wrong with my radio chip, I have a OS but no gsm. "Welcome to the club" But, I don't know how to solve that problem.
eraserbabyboy said:
Hi I have the same problem, radio refuse to flash, something wrong with my radio chip, I have a OS but no gsm. "Welcome to the club" But, I don't know how to solve that problem.
Click to expand...
Click to collapse
ok,we can continue this thread to find the solution,is there anybody knows how we can fix this problem??
is it a hardware problem??i wish it isn't.
hamed_ppc said:
ok,we can continue this thread to find the solution,is there anybody knows how we can fix this problem??
is it a hardware problem??i wish it isn't.
Click to expand...
Click to collapse
I think that is hardware problem. I flash only OS, without radio and now my hermes work only as PDA, wi-fi and BT also work, but still no gsm.
eraserbabyboy said:
I think that is hardware problem. I flash only OS, without radio and now my hermes work only as PDA, wi-fi and BT also work, but still no gsm.
Click to expand...
Click to collapse
ok,but how we can fix it?Should we replace something in our pda??
i want to know is it fixable or not??
hamed_ppc said:
ok,but how we can fix it?Should we replace something in our pda??
i want to know is it fixable or not??
Click to expand...
Click to collapse
I don't know. In my country I have a htc services and they say to me that my motherboard must be replaced because is to hard to change only radio chip and they only change all motherboard. For 350 Eur(+some Eur) I can by new Tytn. Now I use my pda in my home (in toalet) via wireles to look internet. Work's fine, but sometimes freeze OS and I must do soft reset.
ok guys , i might found a temp solution or maybe it will work permenantely with some one , but i need some one who have spare time and steel nerves coz i'm sick and tired of trying many files and roms and radios .
so any one is willing to start this experiment with his hermes and his spare-time lets begin .
first of all i want to declare that this method revived my radio and i used my device for one day just fine receiving and making calls . then the next day i decided to make a hard reset to see if the radio will stay working , and the result was the radio was dead .
here we go .
1.flash you device with GM360 gold edition http://forum.xda-developers.com/showthread.php?t=329282 don't ask why just try it .
2.after the phone is flashed with gm360 and working ok with no radio or "no gsm" messege now you should flash your phone with your device manufacturer WM5 ROM .
3. to flash WM5 rom you need to follow mr.vanx guide for safe WM5 downgrade . http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=27&Itemid=26 here it is .
4. now after you've flashed WM5 successfully and your device is also working fine with it but still no radio or "no gsm" . you need to flash only radio to your device . no OS only the radio .
5. download this radio . http://forum.xda-developers.com/showthread.php?t=334697 and unrar it on some folder . and don't flash it yet to your device .
6 download Olipro RUUwraper 5.2 http://forum.xda-developers.com/showthread.php?t=298737 there u go.
7. now the files from step "5" which they are the radio 1.54 put the file ruuwrapper from step "6" in the same folder with them to start the radio upgrade using "RUUWrapper.exe" not "ROMUpgradeUt.exe" . when u run it you will have multiple choices , choose "Force Unsafe SSPL (not recommended)" . .
now the radio upgrade should go smoothly as it went for me the first time . after the radio upgrade is done u should be able to use ur radio fine .
now can some one take half the effort of me writing this long method and try it ? thanx for the feedback also .
good luck for all .
feedback
Just now I finished all, by your instruction, step by step. When do the last step, flashing radio rom it's stuck on 0%. Many thank's for help, but it does not work for me.
a-h-t1,
thx for your discription,I'll try your method as soon as i can(because ADSL isn't much available!!)
eraserbabyboy,
can you tell me when did this problem happen to you(i mean loosing GSM)??did it happen when you was flashing WM6 ROM??
I really want to know why this problem happen to me while i didn't have it before flashing??is flashing cause to a hardware problem???
eraserbabyboy,
can you tell me when did this problem happen to you(i mean loosing GSM)??did it happen when you was flashing WM6 ROM??
I really want to know why this problem happen to me while i didn't have it before flashing??is flashing cause to a hardware problem???[/QUOTE]
Hamed I dont know what's happened with my hermes, because I get him with the no gsm error. I have a bootloader 1.09 with enable kitl mode. In PB I lose many, many night to boot os but without sucess. And post many question here, but without answer, a-h-t1 is the first men who try to help and meny 10x for that.
So, before 2 week I send my hermes to Imei-check and before few days I get it back with bootloader 1.01 mfg and instruction from imei teamroblem_Description: The radio chip is faulty 100%. Now the handset is usable as PDA only (wifi + bluetooth working too), but not as a phone (the GSM module refuse to answer/flash).
DO NOT attempt to upgrade the firmware in the phone with a firmware which has RADIO upgrade, as it will put the handset back to the brick mode!!!
Model is SVP3100.[/COLOR][/COLOR]
After that I put the SPL 2.30 Olipro to prevent any future damage, and continuing to "play" and experiment, because I don't have more than, to loose. I have P3300 who work's very nice....
It's possible to boot any OS without radio. (I use nbh tool 1.01 to extract nbh file to nb and after make Ruu_signed but without radio).Also try metod via SD card and same to you, stop when try to flash radio. Also it's happened on 12-13%(independed of the rom version) when start full RUU upgrade. And when try to flashing only radio they stop on 0%. On 12-13% ruu upgrade try to flash radio in this moment, and this is the end. I am not sure is this hardware problems, but imei (I dont belived too much) said YES. In win OS I don't have a imei identification (in device info/identity) and of course radio version is blank. Sometimes happened that os blocked(freeze) or device just totaly go to power off mode and I must to do soft reset. Is any way to totaly disabled phone function in registry? I mean that freeze when phone try to find network or sim, but I am not shure. Last night I open my devices, and get out motherboard, just to see this famously radio chip. It's not possible in "home made" to change yourself this chip. Only if I have a more lucky and found some broken hermes with ok motherboard for 100-150 eur...
I hope that my info just little help to you to know "mystery" about our problems.
And one more time 10x to a-h-t1!
eraserbabyboy said:
Just now I finished all, by your instruction, step by step. When do the last step, flashing radio rom it's stuck on 0%. Many thank's for help, but it does not work for me.
Click to expand...
Click to collapse
I just tried it and same result like you
but many thx for a-h-t1 and eraserbabyboy's help.now I want to try fix it in hardware way!!
but if anyone has idea about our problem please say here.i think it's going to be common problem,because i see many people in xda who has the same problem.
Read this, to see how I solve my problem. But I still have a hope, that it's not hardware problem and in the future I hope that someone will found software key to solve our corrupted radio.
http://forum.xda-developers.com/showthread.php?t=338413
ok,i think it was almost three months ago that i had posted my last post!!
you know my problem and i feel it has became a common problem for poeple who have hermes,unfortunately.
last week,i found a service man who believed that my phone's problem is fixable.
so i gave my pda to him,and because he lives in another city,i returned to mine and waited for him.
yesterday i phoned him,and this is what he said to me:
"first,I tried software methods,but the result was nothing!then I disassembled the device and changed the piece of RF of your ppc.it hung first,but now it loads the windows and find the antenna too!!but immediatly after finding,it hangs."
he has used the Dopod's RF in my htc TyTN and thinks that this problem(hanging after finding the antenna) is because of not matched radiorom.
I have good feel about his say,and i'm trying to help him find the correct radio rom,because he is so busy and cant search the internet to find the radiorom.so I've mailed him the link of wiki's radio rom for hermes and I hope someday this tragedy will finish but i'm not sure.
if anyone have comment about this case please help us,specialy about the RF,because I don't know anything about the Radio Frequency.
I HAD the EXACT same problem I Hermes would get stuck at 11% EVERYtime I tried to flash the OS rom with WM6!! The upgrade process would start and then [email protected]! 11% and I would get ERROR 262 (loss of communication) No FIX anywhere, even with site full of "supposed Hermes Fanboys" Nothing NOBODY knows nothing bout this issue. BUT I think I have found a fix (I have recovered twice gonna do it 1 more time to confirm METHOD)
1a
Its called a 1a brick. Look in the sticky brick section. like 170+ pages of this issue. I believe I have the same device. No GSM/ no imei no radio. Can flash rom's all day long, as long as rom doesnt include GSM. Try to flash ANY GSM does nothing, let it sit 10hrs... Nice free PDA, till i can figure out the wiki & there must be hope for me. Till then my wiz100 keeps rocking. Like the 8525, but wanted it more as a phone then just pda.
nicknowsky said:
I HAD the EXACT same problem I Hermes would get stuck at 11% EVERYtime I tried to flash the OS rom with WM6!! The upgrade process would start and then [email protected]! 11% and I would get ERROR 262 (loss of communication) No FIX anywhere, even with site full of "supposed Hermes Fanboys" Nothing NOBODY knows nothing bout this issue. BUT I think I have found a fix (I have recovered twice gonna do it 1 more time to confirm METHOD)
Click to expand...
Click to collapse
I hope you will fix your device,but when I read about your solution,I felt that guy who brought back to life your device,has just used a ROM whitout GSM,the way that we have been using since months ago.if I'm in mistake so tell us more.
The end of the Tragedy
o0o0k!!
as I've said in my post,the service man that I love! replaced the RF of my pda,but new problem was hanging after finding the antena!!
as he told me yesterday,he tried another used RF,but this time the TyTN's one and it worked) and there is no problem.so after 4 months nearly I can use my pda.
as soon as I can,I will go to get my device and test it myself.
be wait for my smooth experience!!
What is this???
replaced the RF of my pda
Andrey_ORIN said:
What is this???
replaced the RF of my pda
Click to expand...
Click to collapse
its full name is RFSP=Radio Frequency Signal Processor.it's one of ICs on your Hermes mainboard.it needs a professional to replace.I'll explain more early.
but if you have same problem and have tried all of the the wiki methods then you can test my solution.
Hi to all. I solve my problem. Change myself motherboard. I buy second hand hermes with no working keyboard for 100eu (latter I solve even this problems,bad contact on flat cable)) and change the motherboard to my spv m3100. It's stupid to say that I solve this with some software, it's was hardware
faulty (or maybe not???) and I am very happy, because I can use my hermes again.
Now I have a one, my "old" motherboard (hermes) who working like pda, wi-fi and bluetooth also working, but without gsm. If any wish to do some experiment I am here, waiting for instruction. Also, I add some picture from the phase of changing motherboard.
Information for "experimental" hermes:
HERM 200
IPL-1.04
SPL-2.30.Olipro
Rom version:Schap's 4.00
Rom Date: 10/15/07
Radio version: none
Protocol version: none
ExtROM version: 3.60.20070822
No cid, no imei, can't flash radio (stuck in 0%)
Can't flash OS which contains radio (stuck in 12-13%)
Regards for all on this forum.
Hi,
how are you?
do you know is it possible to replace just radiochip to fix our hermes??
How I see, in "home made" it's not possible, because we don't have a special equipment for that operation. Even if you have, but where you can found this famously radio chip? If you wont, I can open my "experimental" Hermes and make a picture of all chip and send to you, but I think that on ftp you have all manuals and pictures with the name of each part. I use this manuals to safely open my hermes and myself change the motherboard.
If I understand you, your hermes working like PDA, without gsm. Do you have a same problem, that devices turn off yourself and until soft reset they don't wont to wake up? Also phone function working very slowly, sometimes it's not possible to activate connection manager...etc
And if you agree, please to continuing disscusion on this thread. Thank's.
eraserbabyboy said:
If I understand you, your hermes working like PDA, without gsm. Do you have a same problem, that devices turn off yourself and until soft reset they don't wont to wake up? Also phone function working very slowly, sometimes it's not possible to activate connection manager...etc
And if you agree, please to continuing disscusion on this thread. Thank's.
Click to expand...
Click to collapse
yes,i have same problem(but when i downgraded it to wm5 it works better and faster!).and like you I still have hope that it's not a hardware problem and wish to find solution.next week I will send my PDA to a serviceman to know what is his idea (maybe it'll work).
hamed_ppc said:
yes,i have same problem(but when i downgraded it to wm5 it works better and faster!).and like you I still have hope that it's not a hardware problem and wish to find solution.next week I will send my PDA to a serviceman to know what is his idea (maybe it'll work).
Click to expand...
Click to collapse
OK, I will waiting, and good luck.
Don't forget to inform us what's say serviceman....
Ok , i've joind the club of "no gsm" 3 months ago . and i've tried many many roms and radios and still no luck .
but in one try i've succeeded in flashing the radio to 100% and the radio worked very well and that night was 5 in the morning i danced on the desk when i saw it . i just couldn't belive it . i called my hermes 20 times from another mobile to hear the defult stupid WM5 ring tone , i missed it really
any way i couldn't believe my eyes , so i tried to do a hard reset to check if the radio will stay or go , it just vanished and again back NO GSM . i was disappointed really .
here's the way it succeeded with me and i was gonna post it for every one else as a solution but it happened with me once , and now it wont pass 0% .
here we go .
1.flash you device with GM360 gold edition http://forum.xda-developers.com/showthread.php?t=329282 don't ask why just try it .
2.after the phone is flashed with gm360 and working ok with no radio or "no gsm" messege now you should flash your phone with your device manufacturer WM5 ROM .
3. to flash WM5 rom you need to follow mr.vanx guide for safe WM5 downgrade . http://www.mrvanx.org/cms/index.php?...27&Itemi d=26 here it is .
4. now after you've flashed WM5 successfully and your device is also working fine with it but still no radio or "no gsm" . you need to flash only radio to your device . no OS only the radio .
5. download this radio . http://forum.xda-developers.com/showthread.php?t=334697 and unrar it on some folder . and don't flash it yet to your device .
6 download Olipro RUUwraper 5.2 http://forum.xda-developers.com/showthread.php?t=298737 there u go.
7. now the files from step "5" which they are the radio 1.54 put the file ruuwrapper from step "6" in the same folder with them to start the radio upgrade using "RUUWrapper.exe" not "ROMUpgradeUt.exe" . when u run it you will have multiple choices , choose "Force Unsafe SSPL (not recommended)" . .
now the radio upgrade should go smoothly as it went for me the first time . after the radio upgrade is done u should be able to use ur radio fine .
now can some one take half the effort of me writing this long method and try it ? thanx for the feedback also .
good luck for all .
Click to expand...
Click to collapse
i guess it was my one last lucky chance , and i blew it up with hard reset .
anyway the only solution right now for no gsm is to change motherboard unfortunatley
Nudge!!! :S
I lost my Radio today, also the IMEI is gone.
This morning it was working and this afternoon it just stopped, tried a hard reset, still nothing. Just tried to flash 1.54, but that didn't work, now trying 1.51 and i see the progress bar, but it stays at 0%
I will leave it this way at my computer and come back later, but it looks the radiorom is broken
I can flash everything except the radiopart, i really seems broken, i've tried flashing with different SPL versions including 2.60 olipro en SSPL.
Also the phone seems to be a lot slower.
But prior to this all the phone did hang often for the last few weeks, so i guess it was already starting to breakdown
i also have a almost similar experience, can anyone verify that the phone is already breaking down??
trion said:
I can flash everything except the radiopart, i really seems broken, i've tried flashing with different SPL versions including 2.60 olipro en SSPL.
Also the phone seems to be a lot slower.
But prior to this all the phone did hang often for the last few weeks, so i guess it was already starting to breakdown
Click to expand...
Click to collapse
chicharon said:
i also have a almost similar experience, can anyone verify that the phone is already breaking down??
Click to expand...
Click to collapse
What exactly is your problem? I've been noticing that about 70% of my calls fail or hang when I attempt to dial, when I try again they usually go through. I also have problems sending txt messages very often. Is my phone on its way out? I haven't even had this phone for a year.....pisses me off
eagercrow said:
What exactly is your problem? I've been noticing that about 70% of my calls fail or hang when I attempt to dial, when I try again they usually go through. I also have problems sending txt messages very often. Is my phone on its way out? U haven't even had this phone for a year.....pisses me off
Click to expand...
Click to collapse
My phone started to hang a lot last week, just for a minute and then come back again, also losing the phone connection. First i thought it was some software i installed. New rom, problem stayed the same.
And then yesterday i totaly lost the radio part, can't flash it in any way, but the phone still seems a lot slower then normal, like it's still looking for the phone part or something
I gues it's just broken, and as it is older then a year, i gues it is really trashed.....
So i think i'm gona buy a new accu for my old phone, my abbo ends in aug 2008, so no new phone before then
Helo everyone, im currently in limbo about what to do..
i've been using the official HTC WM6 rom on my 8525 with radio v1.40 i think.. i've been loosing signal 2 to times daily. I upgraded to Radio 1.57, everything worked much better then 48 hours later the radio went dead.
i've been using 2 different WinXP PCs but both have the same results so im sure its not the OS..
I've been reinstalling different OS without any problems but always reports NO GSM, i've tried running SSPL-HERM from within WM6 and run the flash from the radio 1.54.07.00 firmware here on XDA-Dev but still 0% progress on the "updating the rom".. error 262 update error..
The phone is using HRM100 IPL-1.04 SPL-2.10.Olipro
Could it be:
A - bad block? if yes, how do i fix it?
B - phone is bricked?
C - damaged radio (physical hardware)
Any help would be great!
I have EXACTLY the same problem....! Now I am worried that I'll get busted on the Warantee rap despite it being the offical T-Mobile release for WM6 for HERM300! Mine stopped working after 12 hours. I have a HERM300 and cannot flash the Radio back. Be careful... I think it's a bad block or something permanent. Trying to flash it back to WM5 and send it back for repair bit it's not looking so good at the moment. Will help you if / when I can.
Seems like all radio's starting to break
I didn't even flash mine and it is broken, can flash everything except for the radio part.
now using it like a normal PDA, using internet through bluetooth with my old phone.
Just 10 months to go before I can get a new phone, I don't think it will be HTC again, never got support from them, only from this website.
i found the best way to flash is by using the sd card method, I always use this method to flash my vario II
indie said:
i found the best way to flash is by using the sd card method, I always use this method to flash my vario II
Click to expand...
Click to collapse
tried it, but freezes at like 10%, how do i go about repairing bad blocks?
i tried the SD card method, no good.. i checked the unit, no bad blocks =(
How did you check for bad blocks? Wanna do the same for mine. Cheers.
Try to use an earlyer RUUwrapper after exctract the .exe file. It solved my same problem. I tryed to flash Schaps 4.00 and stoped at 0% I extracted the 4.00 and the 3.60 roms and I overwrited the 4.00's ruuwrapper with 3.60's ruuwrapper and I launched it (4.00) I can flash with that ruuwrapper without problems I hope it works to you too
mine JasJam (shaps 3.54b) gives the same problem.no gsm signal and after try to upgrade radio,it stuck at 0% and now is always at the 3 colour screen also after off-on battery...what can I do..please Help me!!!!!!
mickscores said:
mine JasJam (shaps 3.54b) gives the same problem.no gsm signal and after try to upgrade radio,it stuck at 0% and now is always at the 3 colour screen also after off-on battery...what can I do..please Help me!!!!!!
Click to expand...
Click to collapse
I think your problem is bigger, because if you haven't got gsm signal than maybe your Hermes has bricked...
that means that I will never fix anymore my hermes????
mickscores said:
that means that I will never fix anymore my hermes????
Click to expand...
Click to collapse
I think you can unbick you hermes, but i don't know how exactly... I should read a lot here and ask befor do anything:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
and here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Have you ever dumpeb your ROM? Because if you have the dll-s befor brick than, if I know well, somebody can solve the problem with a service cable...
GorTen said:
I think you can unbick you hermes, but i don't know how exactly... I should read a lot here and ask befor do anything:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
and here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Have you ever dumpeb your ROM? Because if you have the dll-s befor brick than, if I know well, somebody can solve the problem with a service cable...
Click to expand...
Click to collapse
Is it me or are suddenly lot's of TYTN's losing their radio en IMEI, i lost mine too now it is just like a pda, using my old phone with bluetooth for internet. Impossible to flash the radio. Os only works fine.
Yep! Dunno why. GSM appears to be dying, Just got mine repaired in the post from T-Mobile. Just did a quick MTTY check on it (info 8) and there is BAD BLOCK on it already!!! Repaired???? Not so sure. Should I risk HARD-SPL and flash the rom from WM5 to WM6?
Hey all,
Got my HD2 not too long ago after the first one I got was DOA(it wouldn't hold calls).
Anyway I just want to ask for some advice. I'm with Optus prepaid. Ive managed to setup my phone to send MMS and they are properly sending and receiving. The problem is, I cant use the internet. It wont connect. Anyone here got this working with optus?
Secondly, when I put the phone on loudspeaker, the screen wont turn off. The lock button is the hang up button so I cant just hit that. Is it possible to switch the screen off when in loudspeaker?
Will installing a cooked ROM unlock the extra RAM thats in the phone?
My phone software versions are as follows:
OS Version 5.2.21869 (21869.5.0.82)
Manila Version 2.5.20121431.1
ROM Version 1.72.841.0(82124) WWE
Radio Version 2.04.51.22_2
If I want to change the ROM, can anyone suggest something which looks close to the original but has better performance(speed, battery wise) and does not have stability issues? I really want to ensure I do everything right and not brick my phone. I read something about installing wrong radios can brick the phone.
Does anyone know where I can dl this version of the Telstra ROM? Ive got the 1.49 one.
Currently wanting to install this. Energy.Leo.23673.Sense2.5.Cookie.DinikGlass.Jul.24
Would this ROM give any issues with my phone? Is it just a matter of install and away I go or will I be required to punch in a whole bunch of settings.
This is a messy post but any info would help greatly.
Thanks guys!
SargeRX8 said:
Hey all,
Got my HD2 not too long ago after the first one I got was DOA(it wouldn't hold calls).
Anyway I just want to ask for some advice. I'm with Optus prepaid. Ive managed to setup my phone to send MMS and they are properly sending and receiving. The problem is, I cant use the internet. It wont connect. Anyone here got this working with optus?
Click to expand...
Click to collapse
once you flash a custom rom, chances are it will contain teh standard connectionsetup which will find teh correct settings anyway.
Secondly, when I put the phone on loudspeaker, the screen wont turn off. The lock button is the hang up button so I cant just hit that. Is it possible to switch the screen off when in loudspeaker?
Click to expand...
Click to collapse
try doublefinger tapping (two fingers, single tap, turns off, then i use home key to bring screen back on) on the callers image, this works for some roms, probably more likely to work once you change roms.
Will installing a cooked ROM unlock the extra RAM thats in the phone?
Click to expand...
Click to collapse
yes, assuming the rom is based on a tmous core, and you flash a matching radio.(which the rom would require anyway, its a two part process, a 576 enabled rom and a x.xx.50.x radio)
I read something about installing wrong radios can brick the phone.
Click to expand...
Click to collapse
not your phone, tmous (t mobile US) phones only need to worry about that.
Does anyone know where I can dl this version of the Telstra ROM? Ive got the 1.49 one.
Click to expand...
Click to collapse
google knows, dozens of posts on here know
Alright I got my hands on the same rom Ive got on my phone incase I break anything.
I just need a 1.42.000 spl thingy. Which rom do I need?
not sure what you mean, , , the rom you just found will include 1.42.0000
spl is part of all official roms, its not something you can download on its own. Only in official roms, or by using hspl.
T-mobile HD2 Update MR Software (Version 3.14.531.1), What is it?
Today T-mobile release a new software update. Does anybody know what it is for?
I assume if you have a rom installed it is no good. I am running Energy Rom, and Radio 2.15.50.14, so I am assuming updating would be a bad idea.
yeah has anyone installed it and what are the benefits of it?? I want to know b4 installing...
You may get better answers over in the TMOUS HD2 forum on this
Features of the 3.14.531.1 update
I also had the same question - what is it that changed with the new HTC HD2 ROM? I spent a lot of time searching, and found this:
Pasting the text below, just in case that link dies (I hate it when that happens):
[pasted from phonesreview uk on 10/22/2010]
==============================================
For all you T-mobile HTC HD2 smartphone users out there who have been waiting for an official software update to land, you’ll be happy to know that today is the day you have been waiting for as T-Mobile is to release software update version 3.14.531.1 to the HTC HD2.
According to an article over on Tmonews, the new software update from T-mobile will deliver several fixes along with stability improvements and access to new apps like Amazon MP3 and Shazam. As for those bug fixes…
The new software update will fix such stuff as slow browsing when on Facebook, the inability to delete Gmail messages in the preview screen, Twitter errors, SMS being delivered to the wrong person, and the white screen whilst browsing the net, the inability to hear Visual Voicemail, unable to unlock the device, unable to unlock the HTC HD2 with correct password, and the lack of a space bar on company directory keyboard, and finally the speakerphone doesn’t work after using the Call Assist app to call 611.
HTC HD2 user can download the new software update by visiting t-mobile and following the instruction; however T-mobile will issue a notification by text to HTC HD2 users when the update is ready, which should be today the 19th of October so keep an eye on your text messages and let us know how you get along.
xxandy said:
I also had the same question - what is it that changed with the new HTC HD2 ROM? I spent a lot of time searching, and found this:
Pasting the text below, just in case that link dies (I hate it when that happens):
[pasted from phonesreview uk on 10/22/2010]
==============================================
For all you T-mobile HTC HD2 smartphone users out there who have been waiting for an official software update to land, you’ll be happy to know that today is the day you have been waiting for as T-Mobile is to release software update version 3.14.531.1 to the HTC HD2.
According to an article over on Tmonews, the new software update from T-mobile will deliver several fixes along with stability improvements and access to new apps like Amazon MP3 and Shazam. As for those bug fixes…
The new software update will fix such stuff as slow browsing when on Facebook, the inability to delete Gmail messages in the preview screen, Twitter errors, SMS being delivered to the wrong person, and the white screen whilst browsing the net, the inability to hear Visual Voicemail, unable to unlock the device, unable to unlock the HTC HD2 with correct password, and the lack of a space bar on company directory keyboard, and finally the speakerphone doesn’t work after using the Call Assist app to call 611.
HTC HD2 user can download the new software update by visiting t-mobile and following the instruction; however T-mobile will issue a notification by text to HTC HD2 users when the update is ready, which should be today the 19th of October so keep an eye on your text messages and let us know how you get along.
Click to expand...
Click to collapse
It will also **** up some stuff, while fixing others.
No Bluetooth stack fixes...
Its horrible...I'm having the worst connections to apps like Omarket, Marketplace, Slacker Radio...The Wifi will not stay connected...The only thing working as far as connections is the internet.
edit: Everything's working now except the Facebook app.
hi... does anyone know?
i buyed my hd2 t-mobile unlocked and i'm using it in argentina with "Claro Argentina"... the question is... if i change the rom in this Leo... it's going to be locked again to be used only with T-Mobile?
i don't want to blow it!
thanks!
cainmako said:
hi... does anyone know?
i buyed my hd2 t-mobile unlocked and i'm using it in argentina with "Claro Argentina"... the question is... if i change the rom in this Leo... it's going to be locked again to be used only with T-Mobile?
i don't want to blow it!
thanks!
Click to expand...
Click to collapse
no. Once a phone is network unlocked it cannot be locked again.
cainmako said:
hi... does anyone know?
i buyed my hd2 t-mobile unlocked and i'm using it in argentina with "Claro Argentina"... the question is... if i change the rom in this Leo... it's going to be locked again to be used only with T-Mobile?
i don't want to blow it!
thanks!
Click to expand...
Click to collapse
yes, it will be locked again! But, there is no reason why T-mobile will not request an unlock code from HTC on your behalf. Usually it takes 24-48hrs
erezgati2 said:
yes, it will be locked again! But, there is no reason why T-mobile will not request an unlock code from HTC on your behalf. Usually it takes 24-48hrs
Click to expand...
Click to collapse
Not correct sir, ons your device is bean unlock't and you upgrade/downgrade your Rom it will not be locked again.
DensoYamaha41 said:
T-mobile HD2 Update MR Software (Version 3.14.531.1), What is it?
Today T-mobile release a new software update. Does anybody know what it is for?
I assume if you have a rom installed it is no good. I am running Energy Rom, and Radio 2.15.50.14, so I am assuming updating would be a bad idea.
Click to expand...
Click to collapse
Why you say it's a bad idea...because the official is no good or because you can damage the phone this way ? I went from omega to the 3.14.531.1 and I experience many problems freezes restarts etc ...I think the update damaged the phone (although it was successful)
yorgosb said:
Why you say it's a bad idea...because the official is no good or because you can damage the phone this way ?
Click to expand...
Click to collapse
no, because it would remove the rom he was using, which he didnt want.
I went from omega to the 3.14.531.1 and I experience many problems freezes restarts etc ...I think the update damaged the phone (although it was successful)
Click to expand...
Click to collapse
you probably left hspl installed, 3.14 plus hspl = "many problems freezes restarts etc"
Ι am no expert but I am sure I replaced HSPL with SPL 2.08
Still I experience all these freezes and restarts with both 2.13.531.1 and 3.14.531.1 versions (in 3.14.531.1 it even freezes when you insert the memory card)
Can it be something else ?
yorgosb said:
Ι am no expert but I am sure I replaced HSPL with SPL 2.08
Click to expand...
Click to collapse
so, is that spl 2.08 or hspl 2.08 or spl 2.08.0000 or hspl 2.08.hspl? clarity please, leaving off the last 4 digits prevents us from double checking your work.
enter bootloader, whats it say next to spl? (all of it, not just the x.xx bit)
samsamuel said:
so, is that spl 2.08 or hspl 2.08 or spl 2.08.0000 or hspl 2.08.hspl?
Click to expand...
Click to collapse
Entering the bootloader right now says 2.10.0000
It must have been changed after flashing the official 2.13.531.1 (via USB)
Prior to doing that I had run the utility hspl3 and chosen 2.08.0000 (there are 2 choices in this utility as you say 2.08.0000 and 2.08.hspl) so (I thought) I had replaced the hspl with the official loader
Does this utility (hspl3) effectively changes the SPL or just updates the displayed number ?
Do you suggest following the micro SD card method to flash and not the USB method ?
I read somewhere that the ONLY way to replace the SPL is by flashing from micro SD...so what is the hspl3 utility for ?
Can you help me with that please ?
I need help because the phone right now although it seems to have been flashed correctly to official 2.13.531.1 and displays 2.10.0000 as it's SPL version freezes and restarts every some minutes...
yorgosb said:
Entering the bootloader right now says 2.10.0000
Click to expand...
Click to collapse
thats stock - any ending 0000 is stock
It must have been changed after flashing the official 2.13.531.1 (via USB)
Click to expand...
Click to collapse
yes, because you chose teh wrong 2.08 (next step) it will be changed by usb flashing. Had you chosen 2.08.hspl, this would still say 2.08.hspl
Prior to doing that I had run the utility hspl3 and chosen 2.08.0000 (there are 2 choices in this utility as you say 2.08.0000 and 2.08.hspl) so (I thought) I had replaced the hspl with the official loader
Click to expand...
Click to collapse
you replaced stock with stock
Does this utility (hspl3) effectively changes the SPL or just updates the displayed number ?
Click to expand...
Click to collapse
completely changes the actual spl software in your phone.
Do you suggest following the micro SD card method to flash and not the USB method ?
Click to expand...
Click to collapse
usb, always usb
I read somewhere that the ONLY way to replace the SPL is by flashing from micro SD...so what is the hspl3 utility for ?
Click to expand...
Click to collapse
thats old instructions.
for a start hspl .exeis for applying hspl, not just removing it - you can simply run hspl3 (or hspl4, whichever, makes no difference) - choose an spl ending .0000, hspl is gone. choose one with .hspl and, , , guess, , , yes! it loads hspl onto teh phone.
Can you help me with that please ?
I need help because the phone right now although it seems to have been flashed correctly to official 2.13.531.1 and displays 2.10.0000 as it's SPL version freezes and restarts every some minutes...
Click to expand...
Click to collapse
yep, happens a lot that, especially with stock roms,, give 3.14 a try perhaps.
3.14.531.1 has more problems...not only it freezes with certain applications (or making phone calls) but it freezes when inserting the microSD card as well...that's why I went to 2.13.531.1...at least I could keep the microSD inside without freezing...
And that's why I think it's not a firmware-software issue...that's what I'm trying to verify...
Now I have another bigger issue...after trying to flash a firmware that I think it wasn't T-Mobile's by mistake (the phone is T-Mobile model) the SPL is now 3.03.0000 and the 2.13.531.1 and 3.14.531.1 firmwares refuse to start flashing
Is there something I can do ?
I want to go back to 2.13.531.1 so I can sent it to T-Mobile
Thanks
Use hspl4, choose 2.08.hspl, reflash 2.13.
Sounds like you flashed a non tmous stock 3.14,,, don't do anything that silly again.
Just confirm for us,,, your send key is green, right?
Thank you very much I used hspl4 and managed to go back to the proper ROM
As for the send key if you mean the key with the little telephone on it yes it's green...the phone is T-mobile it says so on the top
Now that I have tried 2.10.531.1 - 2.13.531.1 and 3.14.531.1 versions and all 3
suffer from strange freezes and restarts when making phone calls or watching movies from the internet or the storage card (after some time) don't you think it's safe to presume that there is a hardware fault and return it to the vendor ?
Do you think there is something else for me to try ?
Thank you again for your help...