Helo everyone, im currently in limbo about what to do..
i've been using the official HTC WM6 rom on my 8525 with radio v1.40 i think.. i've been loosing signal 2 to times daily. I upgraded to Radio 1.57, everything worked much better then 48 hours later the radio went dead.
i've been using 2 different WinXP PCs but both have the same results so im sure its not the OS..
I've been reinstalling different OS without any problems but always reports NO GSM, i've tried running SSPL-HERM from within WM6 and run the flash from the radio 1.54.07.00 firmware here on XDA-Dev but still 0% progress on the "updating the rom".. error 262 update error..
The phone is using HRM100 IPL-1.04 SPL-2.10.Olipro
Could it be:
A - bad block? if yes, how do i fix it?
B - phone is bricked?
C - damaged radio (physical hardware)
Any help would be great!
I have EXACTLY the same problem....! Now I am worried that I'll get busted on the Warantee rap despite it being the offical T-Mobile release for WM6 for HERM300! Mine stopped working after 12 hours. I have a HERM300 and cannot flash the Radio back. Be careful... I think it's a bad block or something permanent. Trying to flash it back to WM5 and send it back for repair bit it's not looking so good at the moment. Will help you if / when I can.
Seems like all radio's starting to break
I didn't even flash mine and it is broken, can flash everything except for the radio part.
now using it like a normal PDA, using internet through bluetooth with my old phone.
Just 10 months to go before I can get a new phone, I don't think it will be HTC again, never got support from them, only from this website.
i found the best way to flash is by using the sd card method, I always use this method to flash my vario II
indie said:
i found the best way to flash is by using the sd card method, I always use this method to flash my vario II
Click to expand...
Click to collapse
tried it, but freezes at like 10%, how do i go about repairing bad blocks?
i tried the SD card method, no good.. i checked the unit, no bad blocks =(
How did you check for bad blocks? Wanna do the same for mine. Cheers.
Try to use an earlyer RUUwrapper after exctract the .exe file. It solved my same problem. I tryed to flash Schaps 4.00 and stoped at 0% I extracted the 4.00 and the 3.60 roms and I overwrited the 4.00's ruuwrapper with 3.60's ruuwrapper and I launched it (4.00) I can flash with that ruuwrapper without problems I hope it works to you too
mine JasJam (shaps 3.54b) gives the same problem.no gsm signal and after try to upgrade radio,it stuck at 0% and now is always at the 3 colour screen also after off-on battery...what can I do..please Help me!!!!!!
mickscores said:
mine JasJam (shaps 3.54b) gives the same problem.no gsm signal and after try to upgrade radio,it stuck at 0% and now is always at the 3 colour screen also after off-on battery...what can I do..please Help me!!!!!!
Click to expand...
Click to collapse
I think your problem is bigger, because if you haven't got gsm signal than maybe your Hermes has bricked...
that means that I will never fix anymore my hermes????
mickscores said:
that means that I will never fix anymore my hermes????
Click to expand...
Click to collapse
I think you can unbick you hermes, but i don't know how exactly... I should read a lot here and ask befor do anything:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
and here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Have you ever dumpeb your ROM? Because if you have the dll-s befor brick than, if I know well, somebody can solve the problem with a service cable...
GorTen said:
I think you can unbick you hermes, but i don't know how exactly... I should read a lot here and ask befor do anything:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
and here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Have you ever dumpeb your ROM? Because if you have the dll-s befor brick than, if I know well, somebody can solve the problem with a service cable...
Click to expand...
Click to collapse
Is it me or are suddenly lot's of TYTN's losing their radio en IMEI, i lost mine too now it is just like a pda, using my old phone with bluetooth for internet. Impossible to flash the radio. Os only works fine.
Yep! Dunno why. GSM appears to be dying, Just got mine repaired in the post from T-Mobile. Just did a quick MTTY check on it (info 8) and there is BAD BLOCK on it already!!! Repaired???? Not so sure. Should I risk HARD-SPL and flash the rom from WM5 to WM6?
Related
Hi,
I did the popular mistake, tried to unlock with Universal Unlocker , thinking that this is the staff to unlock all the HTC phones.
Ok. What I have now:
NO GSM - we know that
Tried to install radio roms from here, nothing. I got the information about "Checking the information...." and it is hanging like this.
I made reser and HARD RESET aswell.
I tried to install a lot. Nothing helped.
I had radio ver. 1.05.... I remember that. I have my phone from T-Mobile from UK. I had everything nice, now I have four stripes - RED GREEN BLUE and WHITE and ther is written:
HERM300
IPL-1.01
HERM300
SPL-1.04
Can anybody help me ? I tried to download mtty.exe and put all the commands (not PASTE and it still not working.
Now is 6am in Lisbon. I was sitting all that night and I am finishing writting this post.
Help if you can, regards.
Ben
Have a look on this topic http://forum.xda-developers.com/showthread.php?t=280733
It did not help. Where I can get this Qtek rom ? Is that OK for my device ? I have VARIO II from T-Mobile.
I woul like to try instal this - DUMPED English ROM from TMobile Vario II from here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_DumpedRoms
but i dont now how. There are 3 .raw files, how to put them to my phone ?
That solution didnt help: http://forum.xda-developers.com/showthread.php?t=280733
What else I can do ? I was trying with QTEK rom and a got white screen on the phone and 0% on the computer. It was hanging. I tried 5 times. Then I tried to install the Radio Rom from here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
I choosed all of them. Nothing. All of them are hanging on:
Chencking the information on your device... Please wait..
Then there is a screen to update. After long time. So when I press the button is still the same info. Checking the information on your device... Please wait..
And its hanging. When I reset to bootloader again the soft telling me:
This ROM Upgrade Utility does not design for your device.
Please get probper ROM Upgrade Utility and try again!
Where can I get the radio version 1.05 for T-Mobile Vario II ???????????
Is there possibility to download from somewhere ?
Or maybe I should try other solution ?
Read "problem 5" here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Yes, I was tying point 5 few times. The problem is, I can connect through mtty.exe without any problems, but after soft reset, I am pressing POWER and OK button and going to bootloader mode again, and when I am trying to flash the extracted radio ROM (i tried all of them = 4) and there is a problem. nothing is working. I am waiting and waiting, and there is only info: Checking your device information or something like that. What can I do ? Sorry for my English guys.
Instead of flashing an extracted radio image try to flash a normal shipped rom (if possible matching your cid). Capture the process using usb monitor to see where exactly it fails and which error you get.
Where can I download
pof said:
normal shipped rom (if possible matching my cid).
Click to expand...
Click to collapse
?
I had RADIO 1.05 , that I remember, and have a phone from T-Mobile - MDA Vario II.
Benone said:
Where can I download ?
I had RADIO 1.05 , that I remember, and have a phone from T-Mobile - MDA Vario II.
Click to expand...
Click to collapse
No rom matching your cid is available then, use the TyTN 1.18 rom.
pof said:
No rom matching your cid is available then, use the TyTN 1.18 rom.
Click to expand...
Click to collapse
I tried that ROM 2 times, once I plugged with holding camera button and second time without. I made monitor of QTEK rom aswell, because its the one which is changing phone screen from red green blue stripes to completly white. But nothing else is doin...
A attaching logs in zip file below. I have 3 files from each session, I dont know which are correct, 2 of them i saved and 1 is exported.
What do you think ?
I used USB-monitor from http://www.hhdsoftware.com/
very weird... usb seems not working but for what you say bootloader seems to be ok. Are you sure this was after patching the radio with universal unlocker? it seems totally a different problem :-$
I guess you'll have to wait until t-mob releases a ROM matching your CID and then flash it using the hermimg.nbh sd-card flashing method.
You can also try to connect to it via serial, I have no experience on that, but a search on these forums might tell you how...
keep us updated
How long I have to wait ?
Should I go to T-Mobile when I will be back to Scotland and tell them what I did or what ? Did I lose my warranty ? Do you know approximately how much they will charge me for flashing my phone ?
Do I really have no chances to repair it by myself ?
Benone said:
How long I have to wait ?
Click to expand...
Click to collapse
Until t-mobile releases a rom with your cid... it can be today or next year, I don't know.
Benone said:
Should I go to T-Mobile when I will be back to Scotland and tell them what I did or what ? Did I lose my warranty ? Do you know approximately how much they will charge me for flashing my phone ?
Click to expand...
Click to collapse
I don't think you lost the warranty. They usually charge about 100 eur for flashing it back in the service centre. They do it by inserting a diagnostics sd card, but we don't have it for the Hermes
Benone said:
Do I really have no chances to repair it by myself ?
Click to expand...
Click to collapse
You can try flashing over serial port, and you can try sd-card flashing, but for sd-card flashing you need a rom matching your CID first.
Eureka!!!
Finally I made my device working again!
And I dont have simlock !
After trying everything.... ufffff.
THX !!!!!!
1) I downloaded ftp://xda:[email protected]/Hermes/Tools_and_Programs/HTC_Hermes_SIM_Unlock_v1.zip
2) Reset my phone in bootloader mode.
3) Plug USB cable.
4) Run HTC_Hermes_SIM_Unlock_v1.
5) After 20 min. my phone said ELO to meeeee He did not have simlock when was saying that.
YE YE YE
That was simple. If you have any Hermes radio problem, try that first - HTC_Hermes_SIM_Unlock_v1.
Will be more often here, forum seems to be really interesting.
YO!
Yipie
Glad it worked
Need some help...
I tried to flash a new Radio on my Hermes (1.40). Actually to reflash it... (Already had it installed, but this is another story)
While flashing I had 0% update... and not moving
Then CustoRUU said it failed... and proposed me to try again... I have SPL-1.11.Oli
So I could easily restart... get the tri-color screen... But whatever I do... I always refuses to flash... never goes further than 0%... And my USB port works on the PC (tested)... and the phone actually sees once I plug (I get USB apperaing when I plug it)
Has anyone experienced this before ? Can someone help ?
Thanks for your help...
Reflashed the OS ROM and at least I can boot... Kind of unbelievable
A real apin anyway... I have the no GSM problem now, but I guess if I reflash the radio it should work...
Alcibiade said:
Reflashed the OS ROM and at least I can boot... Kind of unbelievable
A real apin anyway... I have the no GSM problem now, but I guess if I reflash the radio it should work...
Click to expand...
Click to collapse
Just cannot reflash it
I tried 1.40 again... get stuck at 0%
So I tried to flash 1.38 instead... Doesnt work. I stay stuck at 0%...
Feel really bad now... If someone can help me...
Thanks
Please refer to the unbricking thread dude, read through it all (i know its a long thread but i can almost guarantee that your situation has been adressed.
look at this guide to flash radio using same way expalined for radio 1.38.xx.xx :
http://www.mrvanx.org/hermes_guide/
The guide is also in italian at this link
mrvanx said:
Please refer to the unbricking thread dude, read through it all (i know its a long thread but i can almost guarantee that your situation has been adressed.
Click to expand...
Click to collapse
I went through it... (Btw didnt precise, I have a X01HT)
Since I have Olipro's Hard SPL 1.11 I should not have any problem... I should be able to flash any NBH with another radio. At least so says the Wiki for unbriking
filippodisvevia said:
look at this guide to flash radio using same way expalined for radio 1.38.xx.xx :
http://www.mrvanx.org/hermes_guide/
The guide is also in italian at this link
Click to expand...
Click to collapse
Thanks, but that s exactly what I had been doing several times... The problem being I get stuck at 0% update...
Alcibiade said:
Thanks, but that s exactly what I had been doing several times... The problem being I get stuck at 0% update...
Click to expand...
Click to collapse
do you get the NO GSM error when the device boots?
if so... it sounds like you bricked your radio bootloader, which I'm afraid is unrecoverable
Olipro said:
do you get the NO GSM error when the device boots?
if so... it sounds like you bricked your radio bootloader, which I'm afraid is unrecoverable
Click to expand...
Click to collapse
HI MAN . .
so there is no way to fix it by software ?? cuz i have the same problem and i'v tryed every almost every thing but there is no way to flash radio rom n stuck in 0%
so what u think to do with my tytn , is there any where to send it to to fix it cuz i'v check the market over here n it cost tooo much to fix it around 500$
cheer
werdow said:
HI MAN . .
so there is no way to fix it by software ?? cuz i have the same problem and i'v tryed every almost every thing but there is no way to flash radio rom n stuck in 0%
so what u think to do with my tytn , is there any where to send it to to fix it cuz i'v check the market over here n it cost tooo much to fix it around 500$
cheer
Click to expand...
Click to collapse
nope, if the radio Bootloader is killed, it's buggered.
Olipro said:
do you get the NO GSM error when the device boots?
if so... it sounds like you bricked your radio bootloader, which I'm afraid is unrecoverable
Click to expand...
Click to collapse
Yes I get the No GSM error when booting
Olipro said:
nope, if the radio Bootloader is killed, it's buggered.
Click to expand...
Click to collapse
Then I am dead...
Olipro said:
do you get the NO GSM error when the device boots?
if so... it sounds like you bricked your radio bootloader, which I'm afraid is unrecoverable
Click to expand...
Click to collapse
No chance to fix it ?
I have been watching this thread, Is there a way to avoid this Oli. This has not happened to me but I do want to make sure that I do not run into troubles with future flashing. I hardly post, to busy reading everything and as you can see from my signature I have Hard SPL 1.40.
Thanks
Alcibiade said:
Yes I get the No GSM error when booting
Click to expand...
Click to collapse
The strange thing is whenever I take out my SIM card and put it back I do not get the "No GSM" message. nd the phone works... That's primarly why I tried to update the radio... To fix this annoying problem...
I just tried again... Removing the SIM, puting back, I get the network, can use the phone. And now, and now......... it's flashing !
Waoh waoh waoh... I guess kind of lucky on this... And I a SURE it's nota misplaced SIM that is the origin of my problem... Still flashing now, will tell the result later
Thanks Olipro for your support
Alcibiade said:
The strange thing is whenever I take out my SIM card and put it back I do not get the "No GSM" message. nd the phone works... That's primarly why I tried to update the radio... To fix this annoying problem...
I just tried again... Removing the SIM, puting back, I get the network, can use the phone. And now, and now......... it's flashing !
Waoh waoh waoh... I guess kind of lucky on this... And I a SURE it's nota misplaced SIM that is the origin of my problem... Still flashing now, will tell the result later
Thanks Olipro for your support
Click to expand...
Click to collapse
It does look like I have a Hardware problem no ? Or not far from it... Seems like I have to take out my SIM card quite often (Not every reboot, but nearly...)
If anybody experienced the same kind of trouble... I'd be happy to hear from them
Olipro, could it be tht the radio bootloader is corrupted, but still working from time to time ? Or maybe I have a hardware issue ? Someting I can try to check about the radio bootloader (Or try to fix it) ?
Otherwise since I dumped the original ROM of my phone, I ll learn how flash it back (If I remember well it's kind of a pain, since the image is not similar to the ones we usually flash from this forum...) and will bring it back
My worry is that the flash fails in the middle and I get stuck... And not sure my phone maker will like "Hard SPL"... But I should not remove it... too risky...
Anyway I'd rather avoid that so if anybody has a clue of what may have happened to my radio booloader (Or if it's something else...), I'd love to have some advice
Lurch3559 said:
I have been watching this thread, Is there a way to avoid this Oli. This has not happened to me but I do want to make sure that I do not run into troubles with future flashing. I hardly post, to busy reading everything and as you can see from my signature I have Hard SPL 1.40.
Thanks
Click to expand...
Click to collapse
yes... I think if the Radio BL is the same or older then the process is skipped, therefore, and again, I *think* if you're BL0108 then you're safe from this.
Thanks for the info Oli.
Even in this configuration (ie moving the SIM or rebooting until I dont have the "NO GSM" message, my 3G / HSDPA connection drops frequently and I have to reboot... Sometimes the phone works, soemtimes it doesnt
Olipro: this symptoms are symptoms for what ? Broken radio bootloader ? (But as it seems not 100% broken...) Or something else ? Do I have a chance to fix this ?
Hi,
i have one bricked Hermes,and I've tried all the methods that i read ever and i explained completely here:http://forum.xda-developers.com/showpost.php?p=1571302&postcount=1548 but no result.
yesterday i tried SD method with wm6 ROM that i downloaded from htc sit ,but i had this on my screen:
HERMIMG.nbh-
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
it freezes at GSM!!i waited 45min,but nothing changed,then i take out the battery.
do you know why?and what can i do?
sorry for my bad English.
hamed_ppc said:
Hi,
i have one bricked Hermes,and I've tried all the methods that i read ever and i explained completely here:http://forum.xda-developers.com/showpost.php?p=1571302&postcount=1548 but no result.
yesterday i tried SD method with wm6 ROM that i downloaded from htc sit ,but i had this on my screen:
HERMIMG.nbh-
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
it freezes at GSM!!i waited 45min,but nothing changed,then i take out the battery.
do you know why?and what can i do?
sorry for my bad English.
Click to expand...
Click to collapse
Hi I have the same problem, radio refuse to flash, something wrong with my radio chip, I have a OS but no gsm. "Welcome to the club" But, I don't know how to solve that problem.
eraserbabyboy said:
Hi I have the same problem, radio refuse to flash, something wrong with my radio chip, I have a OS but no gsm. "Welcome to the club" But, I don't know how to solve that problem.
Click to expand...
Click to collapse
ok,we can continue this thread to find the solution,is there anybody knows how we can fix this problem??
is it a hardware problem??i wish it isn't.
hamed_ppc said:
ok,we can continue this thread to find the solution,is there anybody knows how we can fix this problem??
is it a hardware problem??i wish it isn't.
Click to expand...
Click to collapse
I think that is hardware problem. I flash only OS, without radio and now my hermes work only as PDA, wi-fi and BT also work, but still no gsm.
eraserbabyboy said:
I think that is hardware problem. I flash only OS, without radio and now my hermes work only as PDA, wi-fi and BT also work, but still no gsm.
Click to expand...
Click to collapse
ok,but how we can fix it?Should we replace something in our pda??
i want to know is it fixable or not??
hamed_ppc said:
ok,but how we can fix it?Should we replace something in our pda??
i want to know is it fixable or not??
Click to expand...
Click to collapse
I don't know. In my country I have a htc services and they say to me that my motherboard must be replaced because is to hard to change only radio chip and they only change all motherboard. For 350 Eur(+some Eur) I can by new Tytn. Now I use my pda in my home (in toalet) via wireles to look internet. Work's fine, but sometimes freeze OS and I must do soft reset.
ok guys , i might found a temp solution or maybe it will work permenantely with some one , but i need some one who have spare time and steel nerves coz i'm sick and tired of trying many files and roms and radios .
so any one is willing to start this experiment with his hermes and his spare-time lets begin .
first of all i want to declare that this method revived my radio and i used my device for one day just fine receiving and making calls . then the next day i decided to make a hard reset to see if the radio will stay working , and the result was the radio was dead .
here we go .
1.flash you device with GM360 gold edition http://forum.xda-developers.com/showthread.php?t=329282 don't ask why just try it .
2.after the phone is flashed with gm360 and working ok with no radio or "no gsm" messege now you should flash your phone with your device manufacturer WM5 ROM .
3. to flash WM5 rom you need to follow mr.vanx guide for safe WM5 downgrade . http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=27&Itemid=26 here it is .
4. now after you've flashed WM5 successfully and your device is also working fine with it but still no radio or "no gsm" . you need to flash only radio to your device . no OS only the radio .
5. download this radio . http://forum.xda-developers.com/showthread.php?t=334697 and unrar it on some folder . and don't flash it yet to your device .
6 download Olipro RUUwraper 5.2 http://forum.xda-developers.com/showthread.php?t=298737 there u go.
7. now the files from step "5" which they are the radio 1.54 put the file ruuwrapper from step "6" in the same folder with them to start the radio upgrade using "RUUWrapper.exe" not "ROMUpgradeUt.exe" . when u run it you will have multiple choices , choose "Force Unsafe SSPL (not recommended)" . .
now the radio upgrade should go smoothly as it went for me the first time . after the radio upgrade is done u should be able to use ur radio fine .
now can some one take half the effort of me writing this long method and try it ? thanx for the feedback also .
good luck for all .
feedback
Just now I finished all, by your instruction, step by step. When do the last step, flashing radio rom it's stuck on 0%. Many thank's for help, but it does not work for me.
a-h-t1,
thx for your discription,I'll try your method as soon as i can(because ADSL isn't much available!!)
eraserbabyboy,
can you tell me when did this problem happen to you(i mean loosing GSM)??did it happen when you was flashing WM6 ROM??
I really want to know why this problem happen to me while i didn't have it before flashing??is flashing cause to a hardware problem???
eraserbabyboy,
can you tell me when did this problem happen to you(i mean loosing GSM)??did it happen when you was flashing WM6 ROM??
I really want to know why this problem happen to me while i didn't have it before flashing??is flashing cause to a hardware problem???[/QUOTE]
Hamed I dont know what's happened with my hermes, because I get him with the no gsm error. I have a bootloader 1.09 with enable kitl mode. In PB I lose many, many night to boot os but without sucess. And post many question here, but without answer, a-h-t1 is the first men who try to help and meny 10x for that.
So, before 2 week I send my hermes to Imei-check and before few days I get it back with bootloader 1.01 mfg and instruction from imei teamroblem_Description: The radio chip is faulty 100%. Now the handset is usable as PDA only (wifi + bluetooth working too), but not as a phone (the GSM module refuse to answer/flash).
DO NOT attempt to upgrade the firmware in the phone with a firmware which has RADIO upgrade, as it will put the handset back to the brick mode!!!
Model is SVP3100.[/COLOR][/COLOR]
After that I put the SPL 2.30 Olipro to prevent any future damage, and continuing to "play" and experiment, because I don't have more than, to loose. I have P3300 who work's very nice....
It's possible to boot any OS without radio. (I use nbh tool 1.01 to extract nbh file to nb and after make Ruu_signed but without radio).Also try metod via SD card and same to you, stop when try to flash radio. Also it's happened on 12-13%(independed of the rom version) when start full RUU upgrade. And when try to flashing only radio they stop on 0%. On 12-13% ruu upgrade try to flash radio in this moment, and this is the end. I am not sure is this hardware problems, but imei (I dont belived too much) said YES. In win OS I don't have a imei identification (in device info/identity) and of course radio version is blank. Sometimes happened that os blocked(freeze) or device just totaly go to power off mode and I must to do soft reset. Is any way to totaly disabled phone function in registry? I mean that freeze when phone try to find network or sim, but I am not shure. Last night I open my devices, and get out motherboard, just to see this famously radio chip. It's not possible in "home made" to change yourself this chip. Only if I have a more lucky and found some broken hermes with ok motherboard for 100-150 eur...
I hope that my info just little help to you to know "mystery" about our problems.
And one more time 10x to a-h-t1!
eraserbabyboy said:
Just now I finished all, by your instruction, step by step. When do the last step, flashing radio rom it's stuck on 0%. Many thank's for help, but it does not work for me.
Click to expand...
Click to collapse
I just tried it and same result like you
but many thx for a-h-t1 and eraserbabyboy's help.now I want to try fix it in hardware way!!
but if anyone has idea about our problem please say here.i think it's going to be common problem,because i see many people in xda who has the same problem.
Read this, to see how I solve my problem. But I still have a hope, that it's not hardware problem and in the future I hope that someone will found software key to solve our corrupted radio.
http://forum.xda-developers.com/showthread.php?t=338413
ok,i think it was almost three months ago that i had posted my last post!!
you know my problem and i feel it has became a common problem for poeple who have hermes,unfortunately.
last week,i found a service man who believed that my phone's problem is fixable.
so i gave my pda to him,and because he lives in another city,i returned to mine and waited for him.
yesterday i phoned him,and this is what he said to me:
"first,I tried software methods,but the result was nothing!then I disassembled the device and changed the piece of RF of your ppc.it hung first,but now it loads the windows and find the antenna too!!but immediatly after finding,it hangs."
he has used the Dopod's RF in my htc TyTN and thinks that this problem(hanging after finding the antenna) is because of not matched radiorom.
I have good feel about his say,and i'm trying to help him find the correct radio rom,because he is so busy and cant search the internet to find the radiorom.so I've mailed him the link of wiki's radio rom for hermes and I hope someday this tragedy will finish but i'm not sure.
if anyone have comment about this case please help us,specialy about the RF,because I don't know anything about the Radio Frequency.
I HAD the EXACT same problem I Hermes would get stuck at 11% EVERYtime I tried to flash the OS rom with WM6!! The upgrade process would start and then [email protected]! 11% and I would get ERROR 262 (loss of communication) No FIX anywhere, even with site full of "supposed Hermes Fanboys" Nothing NOBODY knows nothing bout this issue. BUT I think I have found a fix (I have recovered twice gonna do it 1 more time to confirm METHOD)
1a
Its called a 1a brick. Look in the sticky brick section. like 170+ pages of this issue. I believe I have the same device. No GSM/ no imei no radio. Can flash rom's all day long, as long as rom doesnt include GSM. Try to flash ANY GSM does nothing, let it sit 10hrs... Nice free PDA, till i can figure out the wiki & there must be hope for me. Till then my wiz100 keeps rocking. Like the 8525, but wanted it more as a phone then just pda.
nicknowsky said:
I HAD the EXACT same problem I Hermes would get stuck at 11% EVERYtime I tried to flash the OS rom with WM6!! The upgrade process would start and then [email protected]! 11% and I would get ERROR 262 (loss of communication) No FIX anywhere, even with site full of "supposed Hermes Fanboys" Nothing NOBODY knows nothing bout this issue. BUT I think I have found a fix (I have recovered twice gonna do it 1 more time to confirm METHOD)
Click to expand...
Click to collapse
I hope you will fix your device,but when I read about your solution,I felt that guy who brought back to life your device,has just used a ROM whitout GSM,the way that we have been using since months ago.if I'm in mistake so tell us more.
The end of the Tragedy
o0o0k!!
as I've said in my post,the service man that I love! replaced the RF of my pda,but new problem was hanging after finding the antena!!
as he told me yesterday,he tried another used RF,but this time the TyTN's one and it worked) and there is no problem.so after 4 months nearly I can use my pda.
as soon as I can,I will go to get my device and test it myself.
be wait for my smooth experience!!
What is this???
replaced the RF of my pda
Andrey_ORIN said:
What is this???
replaced the RF of my pda
Click to expand...
Click to collapse
its full name is RFSP=Radio Frequency Signal Processor.it's one of ICs on your Hermes mainboard.it needs a professional to replace.I'll explain more early.
but if you have same problem and have tried all of the the wiki methods then you can test my solution.
Hi to all. I solve my problem. Change myself motherboard. I buy second hand hermes with no working keyboard for 100eu (latter I solve even this problems,bad contact on flat cable)) and change the motherboard to my spv m3100. It's stupid to say that I solve this with some software, it's was hardware
faulty (or maybe not???) and I am very happy, because I can use my hermes again.
Now I have a one, my "old" motherboard (hermes) who working like pda, wi-fi and bluetooth also working, but without gsm. If any wish to do some experiment I am here, waiting for instruction. Also, I add some picture from the phase of changing motherboard.
Information for "experimental" hermes:
HERM 200
IPL-1.04
SPL-2.30.Olipro
Rom version:Schap's 4.00
Rom Date: 10/15/07
Radio version: none
Protocol version: none
ExtROM version: 3.60.20070822
No cid, no imei, can't flash radio (stuck in 0%)
Can't flash OS which contains radio (stuck in 12-13%)
Regards for all on this forum.
Hi,
how are you?
do you know is it possible to replace just radiochip to fix our hermes??
How I see, in "home made" it's not possible, because we don't have a special equipment for that operation. Even if you have, but where you can found this famously radio chip? If you wont, I can open my "experimental" Hermes and make a picture of all chip and send to you, but I think that on ftp you have all manuals and pictures with the name of each part. I use this manuals to safely open my hermes and myself change the motherboard.
If I understand you, your hermes working like PDA, without gsm. Do you have a same problem, that devices turn off yourself and until soft reset they don't wont to wake up? Also phone function working very slowly, sometimes it's not possible to activate connection manager...etc
And if you agree, please to continuing disscusion on this thread. Thank's.
eraserbabyboy said:
If I understand you, your hermes working like PDA, without gsm. Do you have a same problem, that devices turn off yourself and until soft reset they don't wont to wake up? Also phone function working very slowly, sometimes it's not possible to activate connection manager...etc
And if you agree, please to continuing disscusion on this thread. Thank's.
Click to expand...
Click to collapse
yes,i have same problem(but when i downgraded it to wm5 it works better and faster!).and like you I still have hope that it's not a hardware problem and wish to find solution.next week I will send my PDA to a serviceman to know what is his idea (maybe it'll work).
hamed_ppc said:
yes,i have same problem(but when i downgraded it to wm5 it works better and faster!).and like you I still have hope that it's not a hardware problem and wish to find solution.next week I will send my PDA to a serviceman to know what is his idea (maybe it'll work).
Click to expand...
Click to collapse
OK, I will waiting, and good luck.
Don't forget to inform us what's say serviceman....
Ok , i've joind the club of "no gsm" 3 months ago . and i've tried many many roms and radios and still no luck .
but in one try i've succeeded in flashing the radio to 100% and the radio worked very well and that night was 5 in the morning i danced on the desk when i saw it . i just couldn't belive it . i called my hermes 20 times from another mobile to hear the defult stupid WM5 ring tone , i missed it really
any way i couldn't believe my eyes , so i tried to do a hard reset to check if the radio will stay or go , it just vanished and again back NO GSM . i was disappointed really .
here's the way it succeeded with me and i was gonna post it for every one else as a solution but it happened with me once , and now it wont pass 0% .
here we go .
1.flash you device with GM360 gold edition http://forum.xda-developers.com/showthread.php?t=329282 don't ask why just try it .
2.after the phone is flashed with gm360 and working ok with no radio or "no gsm" messege now you should flash your phone with your device manufacturer WM5 ROM .
3. to flash WM5 rom you need to follow mr.vanx guide for safe WM5 downgrade . http://www.mrvanx.org/cms/index.php?...27&Itemi d=26 here it is .
4. now after you've flashed WM5 successfully and your device is also working fine with it but still no radio or "no gsm" . you need to flash only radio to your device . no OS only the radio .
5. download this radio . http://forum.xda-developers.com/showthread.php?t=334697 and unrar it on some folder . and don't flash it yet to your device .
6 download Olipro RUUwraper 5.2 http://forum.xda-developers.com/showthread.php?t=298737 there u go.
7. now the files from step "5" which they are the radio 1.54 put the file ruuwrapper from step "6" in the same folder with them to start the radio upgrade using "RUUWrapper.exe" not "ROMUpgradeUt.exe" . when u run it you will have multiple choices , choose "Force Unsafe SSPL (not recommended)" . .
now the radio upgrade should go smoothly as it went for me the first time . after the radio upgrade is done u should be able to use ur radio fine .
now can some one take half the effort of me writing this long method and try it ? thanx for the feedback also .
good luck for all .
Click to expand...
Click to collapse
i guess it was my one last lucky chance , and i blew it up with hard reset .
anyway the only solution right now for no gsm is to change motherboard unfortunatley
Nudge!!! :S
I lost my Radio today, also the IMEI is gone.
This morning it was working and this afternoon it just stopped, tried a hard reset, still nothing. Just tried to flash 1.54, but that didn't work, now trying 1.51 and i see the progress bar, but it stays at 0%
I will leave it this way at my computer and come back later, but it looks the radiorom is broken
I can flash everything except the radiopart, i really seems broken, i've tried flashing with different SPL versions including 2.60 olipro en SSPL.
Also the phone seems to be a lot slower.
But prior to this all the phone did hang often for the last few weeks, so i guess it was already starting to breakdown
i also have a almost similar experience, can anyone verify that the phone is already breaking down??
trion said:
I can flash everything except the radiopart, i really seems broken, i've tried flashing with different SPL versions including 2.60 olipro en SSPL.
Also the phone seems to be a lot slower.
But prior to this all the phone did hang often for the last few weeks, so i guess it was already starting to breakdown
Click to expand...
Click to collapse
chicharon said:
i also have a almost similar experience, can anyone verify that the phone is already breaking down??
Click to expand...
Click to collapse
What exactly is your problem? I've been noticing that about 70% of my calls fail or hang when I attempt to dial, when I try again they usually go through. I also have problems sending txt messages very often. Is my phone on its way out? I haven't even had this phone for a year.....pisses me off
eagercrow said:
What exactly is your problem? I've been noticing that about 70% of my calls fail or hang when I attempt to dial, when I try again they usually go through. I also have problems sending txt messages very often. Is my phone on its way out? U haven't even had this phone for a year.....pisses me off
Click to expand...
Click to collapse
My phone started to hang a lot last week, just for a minute and then come back again, also losing the phone connection. First i thought it was some software i installed. New rom, problem stayed the same.
And then yesterday i totaly lost the radio part, can't flash it in any way, but the phone still seems a lot slower then normal, like it's still looking for the phone part or something
I gues it's just broken, and as it is older then a year, i gues it is really trashed.....
So i think i'm gona buy a new accu for my old phone, my abbo ends in aug 2008, so no new phone before then
So here i am with situation : i can put just about any rom to my tytn, but the problem is the radio. I have tried god knows how many different radio updates, none of em work. And "work" as in when i start the updater, the percentage stays at 0% and after a minute or two it just says error code 260. Im using my _xp_ laptop to update it, with usb-cable. No, i dont have micro-sd card cause im totally broke :<
So i got this tytn from my friend, for free, it originally contained black satin and yes everything worked. But then i installed hmm, yes, CRCs newest and thats the point it went kaput, the radio i mean.
The information that the magical tricolor gives me is:
HERM200
IPL-1.01
HERM200
SPL-1.40.Olipro
So any advice, im puzzled, searched the forums x^y times.
halp! :<
You don't have Hard SPL V7 installed - SPL = 2.10 oli. I'd install that 1st.
Look, $10 for a 2Gb sd card, surely you can afford that?
Don't get bigger than 2Gb if you want to use the sd card method as bootloader won't recognise it. I use a 256Mb for flashing and an 8Gb for normal use. More than enough...
Go to the Hard SPL thread to find out how to install Hard SPL using the sd card method - page 116, post 1160. Afterwards you can use this method to flash roms, just drop the steps using SSPL.exe (Soft SPL). I wouldn't chance flashing a radio rom using the pc, too many things could go wrong... Once the memory is corrupted, you have a lovely PDA, but no more phone...
Also, try to flash the original radio rom on, it may work, DON'T try flashing other things as you may permanently brick your Hermes...
Cheers...
yeah looks like im going to have to submit to buying that micro-sd after all, ill get it, do some things and report back
thanks for advice
now back to the drawing board ^^->
new developments :
installed hard-spl 7
bought micro-sd card, formatted it to fat32
attempted, or, attemping, as i write, to put in a new radio rom as instructed in page 116 post #1160
the progress bar gets stuck to ~10% and never goes forward
what course of action to take next?
yup, waited ~50 minutes, still stuck at 10% :<
Try the SHIPPED STOCK radio ROM... If you can remember what it is...
People have had success flashing the native raio rom when none other will work. It seems it hasn't got to the "magic" 12% mark where its impossible to recover so you MAY be able to flash, no guarantees as these little buggers can be obstinate and cantankerous...
now am i blind but, where to get this magigal stock radio rom ?
pikkuhukka said:
now am i blind but, where to get this magigal stock radio rom ?
Click to expand...
Click to collapse
The operator ROMs typically include radio too. You could look for them.
I have a bricked Hermes. Have tried all the things that you have, and some - no luck in getting the radio to work. The PDA part works beautifully. And the battery lasts almost forever...
kernelguy
I live in finland so um, i have no idea what _is_ the original rom, ohwell :<
brick is a brick
btw got a perfectly working tytn ii so no worries ^^ not gonna flash it in _any_ way x)