I have such problems:
Method 1: If I try to use RUU via ActiveSync, as soon as the red/green/blue recovery screen appears, the device disconnects and reconnects from my system, and the RUU eventually times out trying to reach the device with error 260 ("CONNECTION"). Meanwhile, the device sits at a "Loading..." screen forever. Out of six or so attempts using this method, the progress bar on the device came up as 0% one time, but never moved.
Method 2: If I launch the RGB screen manually (power+vol+reset), connect the USB, and then run the RUU, then I get error 264 ("CONNECTION").
Method 3: If I copy RUU_Signed.nbh to the root of my storage card and rename it to RAPHIMG.nbh, then disconnect from my PC and launch the restore screen (RGB), it sits at a "Loading..." screen for forever. I let it sit there for about 10 minutes and it never did anything. Do I need to wait longer?
I can restart and get back into my existing installation regardless -- so nothing's being updated. Not sure what I can do to get this on my device.
Click to expand...
Click to collapse
Device: Touch Pro Verizon
File what I using: Raphael_CDMA_VZW_HSPL_035
To moderators: I delete my topic after finding a solution. Sorry
Related
Hi everyone,
Yesterday I made a Radio update to version 63.18.55.06_6.35.07.08. I made it putting the update.zip (radio rom) file in the SD Card.
All worked fine until the htc hero restarted (after appears the box with the orange arrow). Thereafter the Hero only shows the Hero logo when I turn on.
I tried to init the fastboot pressing home+power and home+back+power buttons (without SD Card and without SIM card) but always the result is the same, the logo appears and nothing happens.
The computer doesn't detects the Hero's USB connection and I can't run adb commands because it raises the "device not found" error.
Someone can help me?
Thanks in advance!
Did you let the screen with the box run its course?
Did the recovery console come back up saying formatting cache?
Have you tryed holding just back+power? ive never heard of using back+home+power
And also, i think your supposed to enter recovery with the sd in.
If that works then in that state is should be found by adb.
But yes, as the poster before me said, it should show the "unpacking" image, and then it should reboot. It should then go straight back into the recovery and the recovery will format the cache. If you tryed to turn it off at any point then, then something is badly mucked up. But it isnt bricked, and probably can be saved. Its only bricked when no logos at all come up on boot. If you managed to get it reconised by adb, you could probs format the cache manualy, though i dont know the command
All the previous steps after the breack are as you say, but after the "unpacking" image, the htc hero restarted and showed the hero logo instead the correct menu.
The problem with the adb is that the computer doesn't recognize the htc hero across usb. When I write the adb command ("adb devices") doesn't displays any device, and I can't run any adb shell for the same reason. How can I run any adb command if the device isn't recognized by the computer?
Have you tryed just taking the battery out, waiting 30 seconds, putting it back in, then booting the phone holding back+power?
And adb is very strange i find... Sometimes it reconises a phone, sometimes it doesnt, for no apparent reason. Have you tryed leaving it on the hero logo for a while then running adb commands?
If he has flashed, wouldnt the USB Debugging setting be reset also, wouldnt this be why he cannot access via adb.
Hi.
I habe exactly the same problem. I have updated radion.
Now ther come only the T-Mobile Logo and that's all.
I can not enter neither Recovery Mode nor fasbtoot does do something.
Any suggestions?
Lado
this problem shud be fixed asap because i think its a threat for all hero modders and owners as our phones get killed at anytime with this process. so guys lets try to find a solution for this problem. cheers
Updated Radio to 63.18.55.06JU_6.35.09.26 and it killed my hero.
first the box with the orange arrow came up and then the whole phone died... now it wont even turn on the screen.
please fix?????????????????
I had the box with the orange arrow yesterday after flashing radio.
The phone isn't dead, I think it's just working.
I kinda paniced also when it happend but I got into recovery eventually.
When you flash a radio it does not actually install that image until your first boot (when you see that phone out the box image).
At this point DO NOT DO ANYTHING WITH THE PHONE just wait and it will install the image and reboot for you. IT CAN TAKE UP TO 10 MINUTES.
If you turn it off or otherwise interrupt this process it can really mess up your phone. however the general rule is so long as you can see the HTC logo when you turn on i.e. it still turns on you can in theory always recover, its just a matter of finding the way that works.
I just flashed the Energy.RAPHAEL.23554.Sense2.1.Mar.30 rom on to my sprint touch pro and everything went fine no problems, the ruu confirmed that the flash was successful and my phone rebooted and now all it will do is continuously reboot itself. I tried every method I know of to try and hard reset it to no avail. It restarts itself, goes to the TOUCHpro logo splash booting screen for maybe 20 to 30 seconds and never goes any further then it restarts again. if anyone out there thinks they can help me PLEASE do so... I'm completely clueless what to do from here. thanks.
update
I've been able to go into bootloader mode now and break the reboot cycle but now my pc is failing to recognize the phone. I have vista and I reinstalled mobile device center and it won't recognize it when I plug it in. on the phone in bootloader mode it will change from serial to usb on the display when I have it connected so I don't know where to go from here. any ideas?
thats how bootloader works..once it says USB just run the RUU. itll work fine. may have been a corrupted download, so id re-download it or just grab a different rom to flash.
Hi all,
I have searched all over and can't figure out what is my problem. Any help would be greatly appreciated. I have TMO US H2. I've been trying to flash my phone for a few hours to no avail. I have tried to flash a few different ROMs via ActiveSync and I get an error saying it lost connection after it tries to access the bootloader. I then tried to flash it via the SD card, but can't get past the tri color screen, even with a signed ROM.
The tri-color screen shows the following:
PB81120 HX-B3
SPL-2.00.HSPL 8G XE
0x05
Cotulla aHSPL 0x50
Can anyone tell me why I can't seem to get past this screen when trying to flash a ROM?
Sounds like a task for task29. Search for it in this forum, and after you perform it - load a proper rom to your device.
I tried task29 but when it gets to the bootloader it gets stuck on the tricolor screen and says USB at the bottom, just like all the other times I tried to flash it. I get the following error message:
Error [302] - Update Error
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-step to recover from the errors so you can continue with the update.
What am I doing wrong? I keep seeing this error message every time.
so you can't even load a ROM from the sd card? that eliminates a bad usb.
You put a Rom image on the root of your sd card (usually needs to be 8gb or smaller). You make sure it is named LEOIMG.nbh. While pressing in the reset button (by the battery), you hold down the volume down button. Your phone should go into bootloader (tricolored) momentarily, then switch to a grey screen that asks if you want to update. press power for yes or vol up? for no. You press the red (phone call end button) and it errors? Is this what happens?
many people report the supplied 16gb card doesn't work for flashing.
for usb flashing, enter bootloader manually. wait for serial to become usb, and then run the flash.
im having the same problem. i have hardspl, i falshed a radio 2.07.50 just fine, then i tried flashing the rom via computer, the bootloader screen would not display the grey coloured screen where you 'update image' and it said lost connection on my computer. I then tried the sd card way, LEOIMG.nbh, same result - no grey screen to 'update image'
A few weeks ago, I decided to install Liberated Aria. I had a few problems with the installation, but eventually it ended up working fine. Last night, I turned my phone off and turned it back on this morning, but now it won't boot. When I turn the phone on, I get:
LIBERTY PVT SHIP S-ON
HBOOT-0.57.0000
MICROP-031b
TOUCH PANEL-STN 21_00
RADIO-7.08.35.06
MAY 8, 2010,03:56:58
FASTBOOT
and then the options:
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN
When I try to boot into recovery, I eventually get:
SD Checking. . .
Loading . . .[LIBEDIAG.zip]
No image!
Loading. . . [LIBEDIAG.nbh]
No image or wrong image!
Loading. . . [LIBEIMG.zip]
No image!
Loading. . . [LIBEIMG.nbh]
No image or wrong image.
and the options change to:
HBOOT
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
The only problem is that I can't select any of the options. None of the buttons - volume, power, whatever - change or select anything. I can't get past either of these screens. I'm kind of a noob when it comes to this kind of thing, so any help would be appreciated.
The phone will automatically boot into FASTBOOT mode if you hold down the trackpad button while pressing the power button. Is it possible that your trackpad button is broken and is being registered as held down? Try messing with it to see if you can fix it. Otherwise you may have to get the phone replaced if it's under warranty.
This issue does not sound like it is related to installing Liberated Aria.
The trackpad button feels the same as it always has when I click it and I don't see anything visibly wrong with it, so I don't see why it would be registered it as clicked. I tried pushing it and all the other buttons a number of times with the same results. I even took off the screen protector thinking maybe that was causing a problem. Is there a way I can just put an image on my SD card and have it automatically boot that so I can fix it?
Doesn't installing a custom bootloader and/or ROM void the warranty?
Well, you probably will be able to simply run the 2.1 RUU on your phone since you can get to FASTBOOT. I'd probably recommend that over doing the SD card method because when you do the SD card method, you have to press a couple buttons to confirm actions which may not work if your phone isn't accepting button presses. The RUU method does not involve any button presses on the phone itself.
However if you want to try the SD card method I can point you in the right direction.
Edit: Link to 2.1 RUU here: http://www.mediafire.com/?cj56c2gfk86k8oe
Rohda said:
Doesn't installing a custom bootloader and/or ROM void the warranty?
Click to expand...
Click to collapse
Installing a custom bootloader would for sure, but you don't have a custom bootloader. Installing a custom ROM does, but you can reverse the process (via RUU) so they can't really tell.
I downloaded the 2.1 RUU, booted to recovery, connected my phone to my computer, and tried to run the RUU but it gave me a USB connection error. Windows also gave me a USB device not recognized error. My phone does say HBOOT USB PLUG, though. Aside from HTC Sync, do I need another driver?
Do you still have the HBOOT driver installed from when you used Unrevoked? If so you should uninstall that driver I believe. That might be interfering.
Also trying running the RUU when your phone is in FASTBOOT, not HBOOT, to see if that works.
I did have the HBOOT driver still installed. I uninstalled it from device manager and deleted the driver folders. Android Phone doesn't show up in device manager anymore. I retried running the RUU in HBOOT and tried running it in FASTBOOT and still get the USB connection error. Any other ideas?
Try reinstalling HTC sync
Sent from my Liberty using XDA App
Also try doing it on a different computer if you have access to one. Preferably one that never had any drivers on it before. Just install HTC Sync, then run the RUU, that's it.
I've always had trouble getting the RUU to run. It's bizarre.
If that doesn't work, and you still want to try the SD card method, you can download this file: http://www.mediafire.com/?ct1ay7t93d8g742
Rename the zip file to LIBEIMG.zip then place it on the SD card. Then it should automatically detect the file next time you're in HBOOT and ask you if you want to proceed with the install. It's pretty self explanatory. Be patient as some steps take a while and it may appear like nothing is happening. It takes about 5 minutes to finish installing everything and will reboot once during the process. After it's done (it will tell you when it's done), the phone will reboot and there will be a scary looking screen but JUST WAIT about 10 seconds and it will boot normally. Then you're good to go.
After you're done with this, make sure to DELETE the LIBEIMG.ZIP file from your SD card. Otherwise it will ask you every time you go into HBOOT if you want to apply the update.
I reinstalled HTC Sync and it wouldn't recognize the phone was connected.
It seems to have taken a turn for the worse. Now, it won't even turn on. The screen turns on (but stays black) and off and the notification light flashes red when connected to a computer but won't do anything at all when it's not connected. I'll try to plug it into a wall instead of a computer and let it charge for a while and try the SD card method.
I went in today to get it checked out and got a new SIM card and a new battery and it fixed the problem.
Thanks a ton for all the help.
Hi, I got Motorola Moto G, original system, no root. I just encrypted my phone, process most probably finished without problems - I stopped watching the phone on around 90%. Then it restarted, boot animation, "enter your password to decrypt the phone", I type it in, green robo shows for 1 second and then black screen (backlighted) :/ After couple hours nothing changes.
If I type wrong password, phone ofc doesn't acccept it. Computer sees device, but I can't access it. When I turn off the phone by pressing POWER for long time, it just resets and goes back to asking for passwod again.
Please help me recover my data...
EDIT
before entering password PC says phone is off, after typing it, PC says it doesn't have drivers (it worked normally before encryption).
EDIT 2
I can enter fast boot, but IDK what next. Recovery mode just ends with "NO COMMAND"
I see that probably all users who got this problem have Motorola Moto G too. Mostly people who use CM and tried to encrypt phone.
I downloaded Android SDK, fastboot.exe tool sees my phone in this state. Not sure if it can be used to do something useful....
adb.exe doesn't see device
Cyanogenmod is very buggy and in perpetual development state, not recommended.
Try this
http://forum.xda-developers.com/showthread.php?t=2542219
scandiun said:
Cyanogenmod is very buggy and in perpetual development state, not recommended.
Try this
http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
Thanks, but I got stock Android and I don't want to loose my warranty :/
bump
So, I left the phone in black screen step over night. Battery ran out. I tried turning it on/off, entering fast boot mode, but nothing happened, then connected to USB. LED turned on for a while, screen too, showing battery with 0%. But now nothing again. Just black or off, not sure. Can't do literally anything, I tried pressing different keys for minutes and changing USB slot.
EDIT
nevermind, fixed battery problem, Moto G with no power needs normal charger or much longer time on USB
From what I've read, encrypted data on phone is protected by password and some kind of encryption key/file. Reflhasing firmware would cause permanent lose of that key and thus whole encrypted data.
The only solution I guess is copying that key on PC. Copying encrypted data if possible, and decrypting on PC using some tool, as Android is open source, so it shouldn't be a problem to extract it's decryption mechanism and run it on PC.
OR copying key to PC, reflashing phone, copying back key and praying this time system will start.