i got my telstra hd2 recently, but i have tried a lot of different wap settings from google regarding rogers gprs/wap in order to make my HD2 connects to internet but i have no luck at all.
please share you settings so i can try.
thanks a bunch in advance
help please....
thanks in advance
no one willing to shred some light?
helpppppppppppppp please
Rogers Sucks... Good luck
That is what I use on my Kaiser:
Rogers GPRS Config
Access Point Name: internet.com
Username: wapuser1
password: wap
ATVELL said:
That is what I use on my Kaiser:
Rogers GPRS Config
Access Point Name: internet.com
Username: wapuser1
password: wap
Click to expand...
Click to collapse
thanks a million for your kind reply
i have tried it before...
didn't work....
I had a few issue on an old device and just put internet.com and didnt use the user name and password and it work.
Related
Good Day Ladies and Gents,
I am currently new to the forum and request your kind assistance.
I am located in toronto and just purchased a SX56 of ebay, Im trying to set up GPRS on it but i dont have the connection settings.
Would any one be kind enough to help me with this
Regards
Jeremy
First, you have to get Data Plan - the WAP Data will not work.
http://www.shoprogers.com/store/wir...sp?shopperID=3B14CX7DPGSL8MECEMVV72AFJ1BRFUFA
and
http://www.shoprogers.com/store/wir...nceCd=ON&CityCd=Toronto&RegionCd=502&flow=GSM
Second you should create new GPRS connection with following settings:
Access Point: internet.com
User: wapuser1
Password: wapuser
Do not hesitate if you need more info.
Paul
Hi Paul,
Thanks for your reply, I am currently subscribed to a rogers 7mb data plan.
When I called rogers to day they gave me these settings
My Connectin is Called : Rogers
Select Modem is : Cellular Line (GPRS)
Access Point: Internet.com
User Name: wapuser1 " all Lowercase"
Password: wap " all lowercase"
When I try connect to GPRS I get an error message saying " The answering modem has disconnected. To check your connection settingsand change them where needed."
Are there any advanced settings i must add like IP addresses by the way i am using T-mobiles Pocket Pc 2003
Cheers mate for the help
Regards
Jeremy
Dear All,
For those who rooted their HTC Hero and cannot access internet, you need to manually configure these 2 APNs ..
starhub gprs
==========
Name: starhub gprs
APN: shwap
Proxy: 10.12.1.2
Port: 8080
starhub mms
=========
Name: starhub mms
APN: shmms
MMSC: http://mms.starhubgee.com.sg:8002
MMS Proxy: 10.12.1.80
MMS Port: 9201
APN Type: mms
Hope this help..
Cheers.
MMS proxy
Hi, thanks, can you double check the MMS proxy as that is not a valid IP address.
/Peter
peterhoeg said:
Hi, thanks, can you double check the MMS proxy as that is not a valid IP address.
/Peter
Click to expand...
Click to collapse
I missed out the 1. Thanks for pointing out...Cheers.
thanks a lot!
I have a desire HD which I bought in Sydney and using in Singapore, after tlaking to various poeple on the I decided to google for myself and low and behold I created the 2 APN's and I am off and running, albiet a bit sluggishly..
thanks again
ccombe said:
I have a desire HD which I bought in Sydney and using in Singapore, after tlaking to various poeple on the I decided to google for myself and low and behold I created the 2 APN's and I am off and running, albiet a bit sluggishly..
thanks again
Click to expand...
Click to collapse
Try the GPRS settings without the proxy. Speeds things up significantly.
Just want to add in one more...
Starhub Internet
==========
Name: Starhub Internet
APN: shwap
User: star
Pass: hub
APN Type: default
Remove the proxy.
It will seem faster as compared to Starhub GRPS.
Found the following settings from an official statement from Google:
For Starhub customers:
- name: Starhub Internet
- APN: shwapint
- username: [leave blank]
- password: [leave blank]
Works fine for my ADAM
Has anyone got the exact settings working for MMSZAP in the UK please? I've tried billions of combinations with this to no avail.
Please help! Thanks, points all round if so
Scrap that, I've sorted it. For those of you having trouble doing this yourselves, the MMSC code for MMSZAP is the MMS relay code just so you know. You do not need the APN.
My MMSZap settings are exactly as follows:
MMSC: http://mmsc.t-mobile.co.uk:8002
User: user
Pass: pass
MMS Proxy: 149.254.201.135
MMS Port: 8080
Works great
Hi everyone,
i'm on vodafone contract (500mb download limit per month)
I've installed one of the darkstone (non-sense) builds and its running well.
only problem is with the internet.
i can connect using the WAP contract APN, but not with the contract internet APN, both from vodafone.
am I ok using the WAP APN, or is it going to cost me more money??? really confused what the difference is.
really hope someone can help.
thanks
psg
From what i know there are different apn types like internet and mms and just internet.
Vodafone in my country uses internet and mms apn and the APN settings are available on their site.
Assuming that you installed a custom rom it just doesnt't have your apn settings just google them good luck ;-)
Sent from my Galaxy S
thanks,
i think I am using the HTC rom 3.14
just use internet, not sending MMS etc...
not sure if contract WAP APN for internet only has a higher charge or separate charge to the contract internet APN
vodafone settings
Here is a list of the settings for Vodafone
1.Contract Internet
2.Contract WAP
3.PAYT Internet
4.PAYT WAP
The Contract APNs are for pay monthly users
and the PAYT APNs for pay as you go.
Contract Internet
APN: Internet
Username: web
Password: web
Contract WAP
APN: wap.vodafone.co.uk
Username: wap
Password: wap
PAYT Internet
APN: pp.vodafone.co.uk
Username: web
Password: web
PAYT WAP
APN: pp.vodafone.co.uk
Username: wap
Password: wap
Regards Russ
Hi Guys,
Can someone with an Bell Atrix on Fido please help me out with the APN setting for MMS? (I have done a lot of reading on this forum).
I have tried almost every possible settings I found on the internet and nothing seems to works. I even called Fido today to make use MMS is enabled on my account. They reset my account just to make sure. Still I can't get it to work.
This is what I have right now.
APN1 [this one will have the radio button beside it]
Name: fido internet
APN: internet.fido.ca
Username: fido
Password: fido
APN Type: default
(all other fields blank)
APN2 [this one will not have any radio button beside it]
Name: fido mms
APN: mms.fido.ca
Username: fido
Password: fido
MMSC: http://mms.fido.ca
MMS Proxy: 205.151.011.013
APN Type: mms
(all other fields blank)
Can someone with a working MMS on Atrix please let me know what they have as settings?
Thanks a lot.
bumping for an answer
war1000 said:
Hi Guys,
Can someone with an Bell Atrix on Fido please help me out with the APN setting for MMS? (I have done a lot of reading on this forum).
I have tried almost every possible settings I found on the internet and nothing seems to works. I even called Fido today to make use MMS is enabled on my account. They reset my account just to make sure. Still I can't get it to work.
This is what I have right now.
APN1 [this one will have the radio button beside it]
Name: fido internet
APN: internet.fido.ca
Username: fido
Password: fido
APN Type: default
(all other fields blank)
APN2 [this one will not have any radio button beside it]
Name: fido mms
APN: mms.fido.ca
Username: fido
Password: fido
MMSC: http://mms.fido.ca
MMS Proxy: 205.151.011.013
APN Type: mms
(all other fields blank)
Can someone with a working MMS on Atrix please let me know what they have as settings?
Thanks a lot.
Click to expand...
Click to collapse
Give this a try.. Mine didn't work but when I deleted the MMS APN, everything worked. It's weird but it worked.. doesn't hurt to try! (I'm on rogers though.. maybe the same will help you!)
thanks but that didn't work
anyone else?