As far as I could tell from the comments the Exploid root would work even after I had updated with the newly available official OTA for my E10i. It took 3 tries to download the OTA on the phone. The phone then said it would begin the update and then it turned itself off. It has been off now for the last hour and any attempt to wake it has been fruitless. How is OTA supposed to work anyway? How long should the update take and how should it proceed? How can I get my phone to respond again?
I had a bit more luck ... On my german phone ota say 'update not possible' so I use seus and it works. Maybe you can use seus to debrick your phone
Sent from my E10i
At this point I really don't know what to do. The phone won't turn on no matter what I try. Aren't you supposed to be able to reset the phone by holding power and the middle button on the front? When I do that the phone gives a short vibration but then nothing else happens.
I was able to plug the phone into my computer and get it recognized by the SE Update Service program. I performed a Factory Reset + Update (twice), but the phone is still not turning on. Guess I need to contact support.
When you say "not turning on", does it get stuck after the boot anim? That's totally normal on the first boot for Android. When I last did a SEUS update it took about 5 minutes before the homescreen appeared
No, what I meant was that there was absolutely no picture of any kind on the display at all.
Anyway, time heals old wounds or something, because suddenly after 2 hours of not doing anything it suddenly started working again. I've even managed to get root now. Hooray.
junglepunk,
Damaged TA (trim area).
Only SErvice Center may help to you. You can't repair it by yourself.
xfdisk11 said:
junglepunk,
Damaged TA (trim area).
Only SErvice Center may help to you. You can't repair it by yourself.
Click to expand...
Click to collapse
Cool, then I'm going into business cause apparently I'm able to fix damaged phones
Oops. Not accuracy reading. But i'm really damaged my.
xfdisk11 said:
Oops. Not accuracy reading. But i'm really damaged my.
Click to expand...
Click to collapse
Sorry to hear that. Hopefully they can fix it quick.
Related
Hi.
I just got my p500 that went to repair( i bricked the phone) and they fixed it and updated to 2.2.2 but im having some issues.
The phone doesn't turn off the screen, even tough its set'd up to and i have to lock it in order to turn off the screen and sometimes just turn back on even without a text or call and i have to again lock it. Other problem is that the phone does not recognize that it's connected to the pc by usb.
I already tried do a reset by restoring the factory settings but it didn't solve anything.
Does anyone know how to fix this? I didn't want to sent it back to repair because it took a long time for they to fix it.
Thanks
All p500 tht was repaired by service hav this prob, I think its due to faulty motherboarf tht they using.
So that means that i will have to send it back =/ Theres really nothing i can do? I even thought it was all software related and if i flash the phone with the 2.2.2 room (im afraid that downgrading the room will brick the phone) but i don't know if this is possible to do with 2.2.2 and because i haven't found how to root this version.
I had the same problem too after get back my O1 from warranty, really feel disappointed with the service.
Anybody can help except sending back to that stupid service centre ?
Did yours took too long to? Mine took almost a month to get back from repair and it came with all this problems.
Im disapointed with the service too.
You should hav been careful in the first place.
Its a dead end now.
I don't see how its a dead end now.
I should have been careful at the first time while was trying different rooms with different methods and that's why the phone died. I sent it to repair and they replaced the motherboard from what i understood. So if it a new motherboard and i havent change anything since and im having these problems i don't see it as a dead end but as a responsibility from lg or the company that repaired the phone and my provider to repair ir. So maybe the first time since it was my fault it would be my responsibility , but they didn't question that and i didn't say anything. After they repair it but with a malfunctioning piece it's their responsibility to fix it. At least that is how i see it.
Im going to have to sent it back to warranty to repair and i hope it doesn't come with the same problems again.
Ok its not a dead end oO''
I understand ur rage... But I jst warning other users to take precautions while messing with the phone. Or they wud also qq over a bricked box..
Gudluck with the service..
Cheers.
Thanks.
I subscribe your adivce.
I have been thinking of reinstall the firmware(the original from lg) to see if it solves the problem, but im having a issue. I can't connect the phone to the computer(only transferring things to the sd card and install or open from there) and i don't know if i can root it with this version i have now, 2.2.2.
Does anyone know how can i do this with the android version and without connecting it to the pc?
PROBLEM SOLVED
I was planing on sending the phone to repair on monday, but at the time and with the phone here i didn't want to give up so i thought of rooting it and reinstalling the firmware, but nothing worked and the phone didn't recognize that it was connected to a computer. So i kept search other ways to reinstall the firmware and came across a website that talked about a "secret menu" code for the phones and i remembered that this phones must had one and that from there i could do something, i did. From there i did a factory reset and, unlike the ones i did before by going to settings-privacy, when the phone rebooted it told me right way that it was connected to the computer. I also tested the problem with the screen light and so far, so good.
So, if anyone else has this problem(sannielyk reportedly had) what i did was entering the "secret menu" code : 3845#*500# and did the factory reset from there.
Apparently it was a software problem or something that wasn't installed right by the lg service. But so far everything is good, and i hope it keeps that away.
Thanks for the help
Edit the title as [solved].
Goodjob bro.
Cheers.
Done.
Thanks
Thx a lot to griffin_1.
I tried ur "secret menu code" to reset the phone & it is really work , now problem solved.
No need to waste time back to the lg centre.
You're welcome. Glad i could help and that sending the phone to lg could be avoided in this situation.
Oh man you saved my life. I don't know how to thank you. Thanks, thanks, thanks a lot, it really worked.
Thanks griffin_1.
I had the same problem and i was going to send it back to LG service. but ive fixed it with the secret code . Thanks again.
hey people i did send my lg p500 to repair becouse something went wrong the change my mainboard and the ime well done , then i got the 2.2.1 as stock rom
good then i did upgrade to Noijins megatron then the problem starts sometimes
if i just use power amp and want to go to the facebook app the phone simply start blinking the buttons like u would overclock your phone.
then it just reboot from alone i think i got the problem 4 or 5 times a day and i simply start beliving that maybe the gprs or the module might be done for the internet.
so i think should i send it to the repair again ? i even try to flash my baseband
same error at the new roms.
i hope you can help me griffin
got the same trouble like u since lg change my motherboard.
griffin_1 said:
PROBLEM SOLVED
I was planing on sending the phone to repair on monday, but at the time and with the phone here i didn't want to give up so i thought of rooting it and reinstalling the firmware, but nothing worked and the phone didn't recognize that it was connected to a computer. So i kept search other ways to reinstall the firmware and came across a website that talked about a "secret menu" code for the phones and i remembered that this phones must had one and that from there i could do something, i did. From there i did a factory reset and, unlike the ones i did before by going to settings-privacy, when the phone rebooted it told me right way that it was connected to the computer. I also tested the problem with the screen light and so far, so good.
So, if anyone else has this problem(sannielyk reportedly had) what i did was entering the "secret menu" code : 3845#*500# and did the factory reset from there.
Apparently it was a software problem or something that wasn't installed right by the lg service. But so far everything is good, and i hope it keeps that away.
Thanks for the help
Click to expand...
Click to collapse
try this
zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
Hi,
I bought a mini pro sk17i a week back. I updated the phone via pc companion to 2.3.4 (4.0.2.A.0.58). The phone was working fine, but after 2 days it started to reboot itself after a call. after 5 continuous reboot i reset the phone (erased all data), then it worked fine for 2 days. Today while i was shopping i made a call, then it started to reboot. One of the things i noticed was from that point any number i dialed was not showing in the call logs. i couldnt reset the data as i was busy shopping and kept the phone in ma pocket. Later i find the phone is switched off mode. I tried pressing power button but nothing happens. Took the battery out and re inserted the battery. did a reset and it started to work fine. When i took the battery out it was a lil hot (warm) and the phone was also warm (battery area).
Here are my questions;
1.Why did this happen.
2. The phone was a lil hot when i removed the battery, can any part inside the phone be damaged if it goes hot.
3. Is this because of hardware problem/Software problem.
(I did a full reflash using flashtool and the latest firmware, till now its working fine.. dunno if this will happen again)
seems like firmware problem to me.
take the phone to service center if haplens again.
but I guess its fixed now, tho I dont know the reason, might be something happened by updating
It happened again. I flashed back to 4.0.2.A.0.42. What could be the problem.
coolbuy said:
It happened again. I flashed back to 4.0.2.A.0.42. What could be the problem.
Click to expand...
Click to collapse
This might be due to any software you installing after flashing...
Try to remember what you do after flashing and uninstall that software
Else get global copy of .58 update and flash that .ftf packageby using flashtool...
coolbuy said:
Hi,
I bought a mini pro sk17i a week back. I updated the phone via pc companion to 2.3.4 (4.0.2.A.0.58). The phone was working fine, but after 2 days it started to reboot itself after a call. after 5 continuous reboot i reset the phone (erased all data), then it worked fine for 2 days. Today while i was shopping i made a call, then it started to reboot. One of the things i noticed was from that point any number i dialed was not showing in the call logs. i couldnt reset the data as i was busy shopping and kept the phone in ma pocket. Later i find the phone is switched off mode. I tried pressing power button but nothing happens. Took the battery out and re inserted the battery. did a reset and it started to work fine. When i took the battery out it was a lil hot (warm) and the phone was also warm (battery area).
Here are my questions;
1.Why did this happen.
2. The phone was a lil hot when i removed the battery, can any part inside the phone be damaged if it goes hot.
3. Is this because of hardware problem/Software problem.
(I did a full reflash using flashtool and the latest firmware, till now its working fine.. dunno if this will happen again)
Click to expand...
Click to collapse
how do u solved it? i have the same problem. oh man. this problem make me sick
bobo180590 said:
how do u solved it? i have the same problem. oh man. this problem make me sick
Click to expand...
Click to collapse
i allready experience boot loops last week ago..
many method i try to fix it.. the best way is im using wotanserver to reflash the original firmware..
i also try using seus and flashtools but totally doesn't work..
so the best way is try use wotanserver..
Have you had this issue since flashing back to .42?
We will roll out a new software starting next week (.6x) mainly meant to improve the memory management to avoid reboots. Might be exactly what you need.
The roll out will start 12W02 but all phones won't get it at the same time so I cannot say for sure when your phone will get it.
Please post again and let me know when you got this so I know if it helped or not.
-Markus
Sony Ericsson Answers Team
I have exactly the same problem
Markus-SEAnswers said:
Have you had this issue since flashing back to .42?
We will roll out a new software starting next week (.6x) mainly meant to improve the memory management to avoid reboots. Might be exactly what you need.
The roll out will start 12W02 but all phones won't get it at the same time so I cannot say for sure when your phone will get it.
Please post again and let me know when you got this so I know if it helped or not.
-Markus
Sony Ericsson Answers Team
Click to expand...
Click to collapse
Hi Markus, Thanks for the response. As soon as i bought the phone i updated the firmware using pc companion. The flashing part went fine and the phone was working fine for 3 days, then it started reboots and turnoffs. I reinstalled the firmware and the same happened again. Then i observed this repeatedly happens when i finish call or lock the phone once it happens. i Also noticed the last called persons info is not stored in call log. But if u plug it for charging then the phone is fine. I rolled back to the previous .42 version. It was working fine for 4 days, yesterday after an hour of music playback (battery was around 44% or below) this happened again. i turned off the phone once it started restarting itself . then turned it on and cleaned the call logs. From that point its working fine without any shutdowns/restarts. Please help, i'm pretty sure that this is not a hardware issue. if the phone can run fine for 3 days without any probs..
andymac2k8 said:
I have exactly the same problem
Click to expand...
Click to collapse
me too when i use GPS or Wlan (.42 and .58 Firmware).
Thanks for the info.
I suggest you wait for the new update (.6x) which should hopefully be available for your phone very soon. If this won't fix the problem you have or if you don't feel like waiting for it (I cannot give an exact date when you will get it) you should contact a service center and have them examine the phone and do whatever necessary to get it working properly.
Repair routines varies a lot depending on market and local laws so you should give the local support a call and ask for some info about this if you choose to go with the service option.
http://www.sonyericsson.com/cws/corporate/common/contact/phonelist
-Markus
Oops, double post.
Hi People of the world! As you can see im new to here so yeah i just might be in the wrong section...
So, I just got my shiny android a week ago, and know it sits on my desk, lifeless, like a brick. Like literally its dead! I don't know if I can fix it or the BIOS (if theres one in Samsung Galaxies) is fried, or maybe the motherboard is fried, or the battery overcharged, etc. But I just cant do anything! I'm totally out of ideas!
Heres the problem, I first rooted my android successfully, and played around with my android a while. But as you expect I just coudn't wait for the jelly bean update! So, I desided I would give a try to take the Russian firmware instead. That was already a bad idea, but I read on some threads that it would work fine, so I downloaded one from Sammobile.com. The real mistake? I downloaded the wrong phone. I own a Samsung Galaxy S Advance NFC Version;GT-I9070P The one I downloaded was UnNFC version; GT-I9070. Well, I didn't realize that, and proceeded with entering download mode and eventually flashing the PDA file from Sammobile with ODIN. So I pressed start. It started the process, and after 5 min it said in blue: RESET. I saw the phone rebooting. Now, another big mistake: I started touching the power button, which I shouldn't have done. Then, instead of waiting, as soon as seeing the thing wasnt booting, I took out the battery and unplugged the USB cable. Then after a while the PASS appeared in green. So it went successfully? NONONO Now it wont boot! More specifically, it wont TURN ON! like it wont whow any sign of life. As if it had no battery or USB.
Today I discovered, If I hold Vol UP+Power+Home when its connected to my PC, it makes the beep, shows that it failed to install the driver for "U8500 USB ROM" What the (*^&(&%*(&^&* is that??? Also, in 5 seconds, the device disappears, meaning that I must hold the button combo for another 20 seconds.
So, I've got no connectivity to ODIN, nor Kies, and I cant go into download mode, nor recovery mode.
Any Help?
Pleeaase if you can help youre a super god of androids!
ok, so if I understand correctly, You can't even turn on a phone - no samsung logo, no yellow triangle, nothing, right?
MikeSome1 said:
ok, so if I understand correctly, You can't even turn on a phone - no samsung logo, no yellow triangle, nothing, right?
Click to expand...
Click to collapse
Exactly. Nothing at all.
The only evidence that its not fried is that the computer detects it as U8500 USB ROM for 5 seconds whenever i hold the power button or any combination. Nothing on the phone though.
Hey
Hey man got the same problem... I have put mine to a service center i will see what the'll do
pafiking said:
Hey man got the same problem... I have put mine to a service center i will see what the'll do
Click to expand...
Click to collapse
Yeah i think I should take it to service too, but I want to try at least first:cyclops:
I've just repeated exactly the same steps as the OP on my GT-9070P and have "successfully" bricked my two-week-old phone. If someone happens to find a solution, please share. :crying:
Lynnfield4000 said:
I've just repeated exactly the same steps as the OP on my GT-9070P and have "successfully" bricked my two-week-old phone. If someone happens to find a solution, please share. :crying:
Click to expand...
Click to collapse
Ikr its really bad to break your phone as soon as i get it. Worse, for me its a few of days to my birthday! Worse thing that could happen. I will PM you if i happen to find a good solution. Also, to make it really the worst thing, the GT-I9070 is one of the less popular phones (not like the s3). The NFC version? Even rarer! So not only are there not many developers working for that phone, not many people have really encountered problems with the phone at all.
Surge
Surge411 said:
Ikr its really bad to break your phone as soon as i get it. Worse, for me its a few of days to my birthday! Worse thing that could happen. I will PM you if i happen to find a good solution. Also, to make it really the worst thing, the GT-I9070 is one of the less popular phones (not like the s3). The NFC version? Even rarer! So not only are there not many developers working for that phone, not many people have really encountered problems with the phone at all.
Surge
Click to expand...
Click to collapse
Please help! I also bricked my Samsung S Advance I9070P after downgrading from JB to GB, since JB was updated for India I9070...but the phone bricked after downgrade. Everything was successful and it had auto-rebooted after the downgrade and stuck with Start up screen. When I removed battery and tried again..it bricked! No recovery mode, No download mode, no power on.
Surge411 said:
Ikr its really bad to break your phone as soon as i get it. Worse, for me its a few of days to my birthday! Worse thing that could happen. I will PM you if i happen to find a good solution. Also, to make it really the worst thing, the GT-I9070 is one of the less popular phones (not like the s3). The NFC version? Even rarer! So not only are there not many developers working for that phone, not many people have really encountered problems with the phone at all.
Surge
Click to expand...
Click to collapse
So you find any solution? I have a similar problem right now.
Hi, I have a galaxy s2 in what i believe is hard brick mode. A little backstory, i was watching some stuff online when i noticed the battery bellow 35%. So i pluged it to the usb charger. I left it there for like 20 minutes. When i came back, i unlocked the phone only to see tons of "error" messages and the force close window. Apperently it had to force close /system?... I was puzzled so i just pulled the battery off and on and tried turning it in. Stuck at the welcome screen. I tried ro acces recovery mode. The android icon was "dead" and some error messeges appeared in red, unable to mount /system, invalid argument. I turned it off, but the welcoming screen poped up without me touching anything. I left it for a few minutes. Then i pulled the battery off for a few minutes too. When i tried to turn it on again, the phone was dead. Nothing works, i tried:
Pressing the power button for a minute
Download mode
Recovery mode
Leaving the battery out for hours
Leaving it charging for hours
Nothing. Im stunned, mainly because i never rooted it or touched anything. Im desesperated at this point, any help will be great. I abused google and made tons of search, but everything related to my problem has to do with flashing and rooting failures. Which i never did with my phone.
If you've never messed with it, and assuming it hasn't expired time-wise, send it in for warranty service. If you don't have warranty, try another battery just in case, then try a jig. Then start looking for JTAG repairers (assuming it can be JTAG'd), and if it can't, take it to local mobile repair shops & have them take a look at it. If they can't/won't fix it, then send it to Samsung/authorised repairer.
I think i voided the guarranty by updating the phone to ICS a few months back... Im trying the battery swap now.
demian93 said:
I think i voided the guarranty by updating the phone to ICS a few months back... Im trying the battery swap now.
Click to expand...
Click to collapse
That wouldnt void the warranty.
{go back to your iphone since you are an android noob}
theunderling said:
That wouldnt void the warranty.
{go back to your iphone since you are an android noob}
Click to expand...
Click to collapse
It depends on how he upgraded to ics, if he did from an official update then is ok, but if he flashed a leaked or a custom rom based on ics then no more warranty if he can't flash the original samsung rom
Already tried changing batteries, didnt work...
You know what to do next then.
I still dont understand the cause of the brick, my phone is dead and it wont even charge. This is bogling my mind. And yeah im an adroid noob, this my first smartphone.
Hey guys I'm new to the forum so go easy on my
So here's the story, last month when the .314 update came I was to impatient to wait until it got the over the air update so I dowloaded it from XDA flashed it using flash tools. I've done the many times before tomy z2 and also to my previous phones and everything went fine. But this time after around 20% of the flashing was complete the completion bar just got stuck there forever. I waited an hour but nothing seemed to be happening so knowing well that it'll brick my phone I unplugged it from the PC. After some googling I found out that there was a new version of flashtools available so I unisntalled my previous version and installed the new one and flashed the same ftf file again. This time to my relief the flashing went normal and my phone was successpfully updated. After a few hours of use my phone just randomly restarted. I didn't pay any attention to it but in the following days my phone started restarting at the most random times around 3-4 times a day. So obviously I knew that something has gone wrong. So I used my booted my phone into safe mode but the problem presisted, I tried doing a hard reset and then I use SUS to repair it but the problem was still there.I even flashed the singtel version of the same firmware version but even then the phone just randomly rebooted. There's nothing wrong with the sim because I switched the sim too (because some people kept insisting that the sim is to blame although I knew in my case that it wasn't) but as I expected the problem presisted. Now I'm at a loss as to what to do.I bought the phone from singapore but right now I don't live there so I can't claim warranty (even if I could).
So I turn to you, the experts in XDA it would be great help if you guys can guid me to a solution or atlesat tell me what the hell is actually wrong with the phone.
Ps: the restarts are entirely random. eg: I can play asphault for hours or shoot 4K for a long time without any problems but then I try texting someone and the phone restarts.
silver1704 said:
Hey guys I'm new to the forum so go easy on my
So here's the story, last month when the .314 update came I was to impatient to wait until it got the over the air update so I dowloaded it from XDA flashed it using flash tools. I've done the many times before tomy z2 and also to my previous phones and everything went fine. But this time after around 20% of the flashing was complete the completion bar just got stuck there forever. I waited an hour but nothing seemed to be happening so knowing well that it'll brick my phone I unplugged it from the PC. After some googling I found out that there was a new version of flashtools available so I unisntalled my previous version and installed the new one and flashed the same ftf file again. This time to my relief the flashing went normal and my phone was successpfully updated. After a few hours of use my phone just randomly restarted. I didn't pay any attention to it but in the following days my phone started restarting at the most random times around 3-4 times a day. So obviously I knew that something has gone wrong. So I used my booted my phone into safe mode but the problem presisted, I tried doing a hard reset and then I use SUS to repair it but the problem was still there.I even flashed the singtel version of the same firmware version but even then the phone just randomly rebooted. There's nothing wrong with the sim because I switched the sim too (because some people kept insisting that the sim is to blame although I knew in my case that it wasn't) but as I expected the problem presisted. Now I'm at a loss as to what to do.I bought the phone from singapore but right now I don't live there so I can't claim warranty (even if I could).
So I turn to you, the experts in XDA it would be great help if you guys can guid me to a solution or atlesat tell me what the hell is actually wrong with the phone.
Ps: the restarts are entirely random. eg: I can play asphault for hours or shoot 4K for a long time without any problems but then I try texting someone and the phone restarts.
Click to expand...
Click to collapse
Telephony error
Try repairing via sony pc compaion
If the problem persists contact sony customer support
Envious_Data said:
Telephony error
Try repairing via sony pc compaion
If the problem persists contact sony customer support
Click to expand...
Click to collapse
Thanks for the reply. I tried repairing via pc companion...did't work. What's a telephony error?
silver1704 said:
Thanks for the reply. I tried repairing via pc companion...did't work. What's a telephony error?
Click to expand...
Click to collapse
Telephony is actualy the phone part of a smart phone, its sim card slot to the app it self
Usualy when there is a problem with any one of those it will cause a phone to not function properly
In this case yours is one of them
Replacement or repair is needed ;D
Envious_Data said:
Telephony is actualy the phone part of a smart phone, its sim card slot to the app it self
Usualy when there is a problem with any one of those it will cause a phone to not function properly
In this case yours is one of them
Replacement or repair is needed ;D
Click to expand...
Click to collapse
I see. Unfortunately the country I live I'm in at the moment doesn't have a sony service centre or anything of the sort so I have to go back to Singapore to actually give it for repairs.
But how is it possible that I got a hardware damage just by a flashing error? I mean before that incident the phone worked just fine for 3 months and I've never dropped my phone or done anything to actually damage it physically.
silver1704 said:
I see. Unfortunately the country I live I'm in at the moment doesn't have a sony service centre or anything of the sort so I have to go back to Singapore to actually give it for repairs.
But how is it possible that I got a hardware damage just by a flashing error? I mean before that incident the phone worked just fine for 3 months and I've never dropped my phone or done anything to actually damage it physically.
Click to expand...
Click to collapse
Z2 suffered alot of manufacturing issues so it is posible a part on a well kept device can break, like my Z2 vibrator motor randomly stopped yet i never dropped it
I've got same problem..did you fixed it? Advice me plz..
Sent from my D6503 using XDA Free mobile app
my has phone automatically factory reset every thing even the SD card
how can I restore my SD card ?????