Hey all,
Ive got a few contacts with more than 1 number. On my Nokia I could enter as many mobile numbers per contact as I wanted. On the HTC, it overwrites the last number... Is there a way to enter more than 1 number for 1 contact?
I'm using the Energy Cookie DinikGlass rom
Thanks!
lol theres a way to store more than one work, home number but only one mobile number...
Bump
Ump
Mp
P
Anyone please?
Although you may only have one 'Mobile' phone number, you can put other mobile numbers in these catagories:
Company
Work
Work2
Home
Home2
Car
Assistant
Pager
Radio Phone
Related
hi people,
recently I ve figure it that when I send sms, the person which get my sms dont recieve my GSM phone number as a sender number, the SMS show my home number as an origin of the sms.
Also in phone settings on the top of the screen is that phone number, the number of my home and not gsm number as it should be...
Probably I ve set it somewhere and sometime and I cant recall any more, digged thru the wallaby but couldnot find it, as far as I remember long time ago somewhere I clicked that number and mark it as "my number" but cant recall anymore was that on some other phone which probably put that in SIM or that was on the wallaby somwhere...
Please help, how can I change that number, its quite stupid to have that number as a senders number when no one can reply to it coz I have no SMS on the home phone and beside that I dont live with my familiy any more...
Just tested the sim in the other phone... Looks like its in the wallaby somewhere, when I send sms from my ancient nokia 5110 everything is fine :S
In the owner data of the wallaby is phone number from the place where I work, I really dont know the origin of that old home number reported in sms messages :S
Thanks ppl and BR !
Hey Guys!
I'm having some issues in contact identification in Brazil and would like to know if you share the same problems in other countries. (And, .:hopefuly:., if you have a solution for this)
In Brazil, to make long distance phone calls we have to store our contacts number in this format:
0 + Operator + Area Code + Phone Number
For short distance calls, you could use just the phone number or the "full" number with the zero, operator and area code numbers.
Considering this, I've always had my contacts full numbers stored in my phone in case that if I go to another area code, I'll still be able to call my contacts from my city and from somewhere else.
The problem is: Whenever I get a SMS / MMS, the operator send the number in the following format (with a missing operator no.) and the phone won't recognize it as being a contact number.
0 + Area Code + Phone Number
I used to have nokias phones (n95, e71), motorola's, etc. and they all were capable to identify the contacts in SMS and phonecalls. I'm probably doing something stupid with my phone here.
It may be relevant:
Phone numbers in brazil: 8 digits
Area codes: 2 digits
Operators: 2 digits
ps.: If I misused the "operator" word, you can undestand it as being like "Sprint", "Verizon", "O2" and other companies that may provide you with long distance services. Eg. I could be a sprint user and use verizon's long distance service.
What your operator?
Thx
EMERSON VIER
My current phone operator is TIM - Brasil - São Paulo (11)
Every SMS I get has the phone number in this format:
0 + Area Code + Phone Number
Does android allow some sort of "default" operator for every phone call?
I'm having the same problem with my phone, I'm also a TIM subscriber.
The only (flawed) solution that I've found is to store the same number again but without the operator code.
Still hoping to find a better solution. Anyone out there can help us?!?
I use the MagiCall 2.2.4. my operator TIM.
andretrizzo said:
I'm having the same problem with my phone, I'm also a TIM subscriber.
The only (flawed) solution that I've found is to store the same number again but without the operator code.
Still hoping to find a better solution. Anyone out there can help us?!?
Click to expand...
Click to collapse
That's exactly what I'm doing.
Couldn't find Magicall for android. Just WinMo.
My phone operator in Brazil is Vivo and I store all my phone numbers in the following format:
0 + area code + phone number
Because I ommited the operator code, Vivo assumes its default code. This way, the numbers stored in my phone are good for short and long distance calls, and the caller identification also works for SMS and MMS.
I'm not sure that applies to TIM though.
Of course what I suggested is just a workaround. This seems to be a known issue in Android:
http://code.google.com/p/android/issues/detail?id=1673
http://code.google.com/p/android/issues/detail?id=1250
http://groups.google.com/group/android-platform/browse_thread/thread/0e5286ce14aba5b2
You could vote for the issues.
TIM doesn't have a "default" operator service. That's why we have this problem.
I think Claro and VIVO does. As soon as I get out of this contract, I'll migrate to other provider.
I have the same problem here.
You guys found any solution beside switching operators?
Nope.... Right now I'm a very happy vivo user.
However, it seems that the sim card is the one responsible to automatically add an operator number. Every time I call someone without the operator I get this message indicating that the sim card has changed the mumber automatically.
I wonder if we could add an program into TIM's simcards to act like other companies do.
danielmk said:
Nope.... Right now I'm a very happy vivo user.
However, it seems that the sim card is the one responsible to automatically add an operator number. Every time I call someone without the operator I get this message indicating that the sim card has changed the mumber automatically.
I wonder if we could add an program into TIM's simcards to act like other companies do.
Click to expand...
Click to collapse
I installed a program called Right Number.
All my contacs are in the format: 0 + Area code + Number (01191234567)
When you make a call, the program adds the operator number of your like.
And when you receive a call, the phone will recognize the contact.
I recomend!
I have searched for this and found the same question posted in a HD2 Android category, but there were no responses... so asking for myself in here.
I have all my phone numbers listed in my contacts with the preceeding area code, as I often travel outside of the local area and need those area codes included in my contacts numbers..... ie: all my phone numbers are 10 digits in length.
However, there doesn't seem to be a requirement for the area code to be sent, when a caller has Caller-ID enabled. In other words, I receive some calls from contacts in my phone, but if their phone doesn't include the area code in their Caller-ID, then my phone doesn't recognise or identify the number. Consequently, when hanging up from those calls, it constantly asks me if I want to save the number.
Note - it isn't a permanent thing. Many incoming calls DO identify correctly, as the area code has obviously been sent with C-ID.
Does anyone have a solution for this?
Obviously I COULD go thru every contact and manually add another non-area-coded phone number - perhaps under an obscure phonebook entry, like "pager"... but surely this is something that one would expect be handled automatically by the phone... not by duplicating entries as a work-around.
What would happen for business-people who travel internationally - most of their contacts would also include the "+61" (or whichever) country code also.....
Nobody ???
Bumping again ????
Anybody have any clues to this?
Did you try disabling the Area Code Prefix setting in Settings -> Call Settings ?
kawazaki said:
Did you try disabling the Area Code Prefix setting in Settings -> Call Settings ?
Click to expand...
Click to collapse
Thanx mate for your reply.
Sorry took so long.... my phone has been in for warranty repair (unrelated matter to this) for the last 7 weeks, so I haven't logged onto xda in that time !!!
No..... I haven't tried disabling the AC Prefix setting. I will have a look at that and see if it makes any difference.
One additional comment..... I am also having the REVERSE problem.... in that SOME people who ring me on their mobiles, the caller ID is also sending the +61 (Australia) country code in front of their mobile number too.... so again, my phone isn't recognising them as being the "same" number as what is stored in my phonebook ????
Will try the disable thing you mention and report if it works.
Sorry mate... cannot find the setting you mention.
Could you explain please exactly where it is ?
spinifex74 said:
Sorry mate... cannot find the setting you mention.
Could you explain please exactly where it is ?
Click to expand...
Click to collapse
Or you could turn off having the phone ask to to add the number to your contacts.
On the US T-Mobile phone it is:
Activate phone screen
Menu
Options
Menu
Network Selection
Advanced tab
Turn off the feature to "Add new phone number to People at end of call"
I'm using the NRG ROM.
Thanks stevedebi.
Sorry - I mite not have been properly clear.
The issue isn't being asked to save a new number.
The issue is.... the phone does not recognise a number - mobile or landline - if there is an area-code or country-code prefixed to the number (or vice versa) with the entry in the phone book.
Eg: ALL my contacts saved in my phone have their mobile numbers WITHOUT the +61 country code.... and ALL landline numbers are saved WITH area-codes.
Now - depending on my contact's phone operators, they sometimes send with, or without, those prefixes in their caller ID's.
Consequently - on those occasions.... my phone does not recognise incoming calls or messages as having come from my contacts, due to the extra numbers at the beginning.
Surely this is a software issue from HTC? I mean, surely the software should be able to query an incoming called ID (either with or without prefixed-codes) with a saved number in the contacts/phonebook (with or without prefixed-codes)... ???
Bumping again ?
Sorry to be repetitive.... still looking for an answer to this ???
Check you registry setting for "HKCU\Control Panel\Phone\CalIidMatch" value=?!?
try to reduce the number for "Value" by 1 and try.
This is for the number of digits your phone will check when comparing incoming numbers with stored names.
Thanx Omar,
Will try that. Question though.... does it check the phone number (by number of digits) in reverse order? ie: setting a particular number will have no effect, if it checks in normal forward order, as it's PREFIXES that are making things wrong.... so the phone needs to ONLY check the LAST 10 digits.... not the first 10. This will eliminate the issue with any country-code added to the front of a number... but will not help with a local area code, as these are dependent on the callers' carrier, if they send the area code in the CID or not
From my experience with my HTC phones, it checks the last digits.
I have number saved with the +974 international code (for Qatar), & when local call come in, they only show the local format (without +974) & the caller ID still recognises the names. Our local numbers are 8 digits, so I have the registry value set at 7 or 8 & it works fine.
I'm looking for something that'll allow me to add more than 1 mobile type number to a contact... I can Company, Work and Work 2, Home and Home 2, Car, Assistant, Work Fax, Pager and Radio as well as Mobile...
But thats the problem, I can't have/add 2 or more mobile type numbers.
Thanks for suggestions and advice!
So I will be changing my mobile phone number, I was wondering is there some app or tool that I can check what services/software/apps that is currently connected to my number so I can update them and change the mobile number registered to my old number to a new one. For example If my gmail or fb is connected to my old number I will remove it and update it with my new one. apparently I lost track of the list of my conneceted services to my number