installed or played with something, and now when i open programs they only draw on top 2/3 of screen, almost like some screen size setting has changed?
sense and some apps ok, just WM native apps. ie. when drawing windows, scroll bars stop at 2/3 with bottom of screen not drawn
help, dont want to hard reset
badaas said:
installed or played with something, and now when i open programs they only draw on top 2/3 of screen, almost like some screen size setting has changed?
sense and some apps ok, just WM native apps. ie. when drawing windows, scroll bars stop at 2/3 with bottom of screen not drawn
help, dont want to hard reset
Click to expand...
Click to collapse
interestingly, but don´t have a solution. this is definitely a problem of resolution. like vga 640x480 and not WVGA 800x480
mirolg said:
interestingly, but don´t have a solution. this is definitely a problem of resolution. like vga 640x480 and not WVGA 800x480
Click to expand...
Click to collapse
yes have hard reset, cant find reg keys, tooooooooooooooo many lool
Related
Hi there!
One of my "problems" I have with the S2 is that i can't seem to be able to properly fit a picture on my screen.
Whenever i set a picture as wallpaper it will be zoomed in.
Is there a way i can fit a picture in its original size (so the whole picture can be seen) on the screen?
Many thanks,
Peter
If you are trying to set a scrollable wallpaper on a single portrait screen then it's not possible, but otherwise you have to click on the portrait icon, then drag the orange lines to the furthest corner of the picture, then set it.
There it goes "wrong", whenever i do that in portrait mode, and I select the part i want and set it as wallpaper... the result will be that it is zoomed in.
For example as i drag the orange lines around my girlfriend and I set it... it will only show me the chest, stomach and a part of the legs instead of the whole body.
PeterK1990 said:
There it goes "wrong", whenever i do that in portrait mode, and I select the part i want and set it as wallpaper... the result will be that it is zoomed in.
For example as i drag the orange lines around my girlfriend and I set it... it will only show me the chest, stomach and a part of the legs instead of the whole body.
Click to expand...
Click to collapse
You need 480 x 800 resolution photos/wallpapers to fit in portrait mode, any other resolution will slightly distort or won't fit on the screen.
I always crop my pictures in photoshop to 960x800 for wallpaper and 480x800 for lockscreen wallpaper. All WVGA androids use these resolutions.
I just checked, i dont loose any of my picture in that resolution.
Hope this helps.
The screens resolution is 480x800, not 960x800, the latter is for scrollable wallpapers, which I never use. So if someone wants to use a full picture set to one screen then he/she should use a wallpaper of phones resolution, i.e- 480x800
Regards.
Sent from GT-I9100
PeterK1990 said:
There it goes "wrong", whenever i do that in portrait mode, and I select the part i want and set it as wallpaper... the result will be that it is zoomed in.
For example as i drag the orange lines around my girlfriend and I set it... it will only show me the chest, stomach and a part of the legs instead of the whole body.
Click to expand...
Click to collapse
I have this same problem, i have resorted to just using the scrollable crop button and knowing that I'll lose the edges. There's certainly some sort of bug regarding this.
I have a photo taken with the SG2 camera that is 480x800. When I set wallpaper, I select portrait mode (non-scrollable, single photo).
However, the actual wallpaper is still zoomed in and I don't know why. Portrait-mode wallpapers seem to be broken, the phone wants to stretch photos into scroll-mode size even though it is not selected.
The lock screen wallpaper works fine.
Anyone know a fix?
Edit: The same problem is described here and also for other phones, no answer yet: http://forum.xda-developers.com/showthread.php?t=1121133
Edit: I have a fix, but it's not a good one. Using a photo editor, add 240x800 pixels to either side of your image. This will produce a 960x800 image. Set this as your scrollable wallpaper (this will not work if you select portrait-mode). Then, use your launcher options to disable wallpaper scrolling.
If you are using stock launcher it should work. If your pic is 480 x 800, select portrait mode , drag the orange lines to fit the whole screen and your pic won't zoom in. The way Samsung uses this feature is crappy anyway. I gotta try 2-3 times before i can adjust the orange lines to fit the screen, without pic being zoomed-in.
When I hook up my prime in r my 720 p TV everything works great, shows the whole screen. But when I hook it up to my 1080p screen it cuts off the outer edge if the screen all the way around. Thick enough to barley see the apps icon on the home screen. But it also does this on my Acer a 500, so I think it is a android issue. Is there a setting that I have never seen before to fix this?
Also I made sure its not the zoom, wide or stretch feature on the TV
Sent from my ADR6300 using xda premium
Got the same problem
monkey10120 said:
When I hook up my prime in r my 720 p TV everything works great, shows the whole screen. But when I hook it up to my 1080p screen it cuts off the outer edge if the screen all the way around. Thick enough to barley see the apps icon on the home screen. But it also does this on my Acer a 500, so I think it is a android issue. Is there a setting that I have never seen before to fix this?
Also I made sure its not the zoom, wide or stretch feature on the TV
Click to expand...
Click to collapse
this is an issue with your TV enabling overscan of the HDMI image. on my panasonic plasma TV i had to troll through the advanced picture settings and change the "HD Size" to "Size 2". i don't know why panasonic makes this the default but that's how it goes. once that setting was made the display was a perfect 1080p crop. changing zoom/wide/stretch doesn't solve this problem because all that does is adjust how a sub-1080p image is presented on the 1080p surface.
jackl8 said:
this is an issue with your TV enabling overscan of the HDMI image. on my panasonic plasma TV i had to troll through the advanced picture settings and change the "HD Size" to "Size 2". i don't know why panasonic makes this the default but that's how it goes. once that setting was made the display was a perfect 1080p crop. changing zoom/wide/stretch doesn't solve this problem because all that does is adjust how a sub-1080p image is presented on the 1080p surface.
Click to expand...
Click to collapse
This^^^^^^^^^^^^^^
My TV used to do the same, it's as he says: find overscan, give it the boot!
Has anyone found an app or method to stretch the comic page to completely fit the screen? When I choose "fit to screen" it has large black spaces on either side. I am looking for a way to utilize all my screen space without it shrinking the comic down to the size of say, the Nook Tablet. I guess the image would have to be stretched somewhat. Anyone know what i'm talking about ?
I haven't tried on the Touchpad yet, but on my Nook I would always use the "fit to width" option, then there is just some vertical scrolling needed. Of course, that has a smaller screen too so I would need to read in landscape mode and scroll for each row of panels. It still worked pretty well though.
I bought my touchpad just to read comics on. If your describing what I think you are, its because most comics are not the exact size of the screen so when your in portrait mode there's about a half inch of blank space so its just black. If you stretched the comic it would probably look weird.
SithL0rd said:
I bought my touchpad just to read comics on. If your describing what I think you are, its because most comics are not the exact size of the screen so when your in portrait mode there's about a half inch of blank space so its just black. If you stretched the comic it would probably look weird.
Click to expand...
Click to collapse
That was one of my reasons for buying a TP too.
On PV for example, when you choose "actual size" it spreads past the left/right borders I would just love it to stay when it hits them so I can utilize all my screen space and not have to scroll. It would be stretching the image I guess but it doesn't look weird because I can do it if I zoom manually, but I have to do so for every page, thus, scrolling. I am not sure if there are other issues such as resolution complicating the problem. It's like the cropping issue on wallpapers - I just don't have the knowledge to identify what the problem is exactly. The correct borders aren't being detected. It seems to happen on every app. The "fit to screen" function thinks the black space is part of the comic.
It's not a huge deal I would just love to find a method to stretch the image to fit perfectly. Would gladly pay for it.
I use comic rack and when it's in landscape mode and I put it on single page, the page fits automatically width wise, doesn't go past. I just scroll up and down, don't need to go left/right to see cut off images. It's that what you're trying to achieve? Same thing goes with PV for me. Width wise the page fits
HP Touchpad [05/13 Nightly] .: Tapatalk 2 :.
Perfect viewer works very well for me for all of the comics I've read. I fit to width and just have to touch to scroll once to get the last inch or so and then to turn the page. Works great with the TP as there seems to be minimal distortion of the panels with its aspect ratio.
Yes that is what I am using (fit to width). It is almost perfect but yeah, you gotta tap the page to get the extra height.
I am guessing this is some technical problem, as I have yet to see any reading app that can fill the page on both the width and height exactly. Yet, when I read PDF magazines on Perfect Viewer, it squeezes the image into the screen and I can read it easily.
Maybe it's the comic resolution or something (though I have tested multiple).
I don't see it not fitting vertically an issue. If everything did fit on the page sometimes the words would be too small to read. I use the TP in landscape mode all the time, I like viewing pages that way better.
HP Touchpad [05/13 Nightly] .: Tapatalk 2 :.
YiNG_YaNG_6o4 said:
I don't see it not fitting vertically an issue. If everything did fit on the page sometimes the words would be too small to read. I use the TP in landscape mode all the time, I like viewing pages that way better.
HP Touchpad [05/13 Nightly] .: Tapatalk 2 :.
Click to expand...
Click to collapse
Most of this was I answered above, recently referencing how PV delas with PDF's, squeezing it onto the screen.
Can't fathom reading comics in landscape mode as this would make them even bigger than most physical comics, and only allow you like 1 strip per read.
Hi,
I'm trying to screen cast from a Nexus 4 to a large screen TV (using a PTV3000). I want to put the TV in portrait mode and have the screen case occupy the entire screen, however I don't seem to find a way to accomplish this. When the phone's orientation is vertical (portrait) it assumes the TV is in landscape orientation and the phone screen is displayed small in the middle of the TV with black space on the sides.
After doing some searching it seems that this behavior can only be changed with a custom ROM, however I haven't been able to pinpoint where in the AOSP tree this behavior can be changed. Any suggestions are much appreciated.
Thanks!
Full screen
mariusmuja said:
Hi,
I'm trying to screen cast from a Nexus 4 to a large screen TV (using a PTV3000). I want to put the TV in portrait mode and have the screen case occupy the entire screen, however I don't seem to find a way to accomplish this. When the phone's orientation is vertical (portrait) it assumes the TV is in landscape orientation and the phone screen is displayed small in the middle of the TV with black space on the sides.
After doing some searching it seems that this behavior can only be changed with a custom ROM, however I haven't been able to pinpoint where in the AOSP tree this behavior can be changed. Any suggestions are much appreciated.
Thanks!
Click to expand...
Click to collapse
Did you ever get the full screen to work?
Hello Good People
I have Galaxy s10 lite snapdragon version. Pretty expensive one. I love my phone.
Sadly, there are ghost touches at the middle of Screen as yellow circle. No warranty period. I tried apps to disable that portion of screen by overscan but no way.
Is there any way to disable that portion by changing screen resolution like this:
"adb shell wm overscan left,top,right,bottom where left, top, right and bottom are the coordinates upto which screen works.
For example, phone resolution of 480px × 854px, would have had this problem, adb shell wm overscan 0,0,0,839 to disable 15px at the bottom of the screen.
Or adb shell wm size 480x839
"
i got this code from net. It disables at bottom but i need the disabled portion placed at the middle of Screen, which i don't know. Would you please help me with correct code or any other way so that i can use the screen without being bothered by ghost touches. Please please. Help a little.
Minimum width 400 dp
Size6.7 inches, 107.8 cm2 (~87.8% screen-to-body ratio)Resolution1080 x 2400 pixels, 20:9 ratio (~394 ppi density)
Run diagnostics. Is it really a hardware issue?
Clear system cache, hard reboot, and try in safe mode.
No factory reset... not yet.
blackhawk said:
Run diagnostics. Is it really a hardware issue?
Clear system cache, hard reboot, and try in safe mode.
No factory reset... not yet.
Click to expand...
Click to collapse
Done but no way out.