[SOLVED] bricked x10 mini - need help - Sony Ericsson XPERIA X10 Mini

Hi, i've just bricked my x10 mini (wanted to edit framework-res.apk and did something wrong)
I still can see it under adb, but if i try to enter su mode to recover old file, i'm getting errors stopped(signa), segmentation fault.
If i try to recover it via seus, i can't connect the phone, coz i need to have "back" button pressed when connecting usb, but i can't turn device off. Only restart with "home" plus "power" buttons...
What am i to do?
[SOLVED]
I've managed to recover it via PC - Companion. When it says, that you have to power off the phone, then hold "back" button and connect usb, you have to hold both the "back" and "home" buttons, then press the "power" button and in the momen, when screen goes black, immediatley connect usb. Then slide your finger to hold only the "back" button.

dopeless said:
[SOLVED]
I've managed to recover it via PC - Companion. When it says, that you have to power off the phone, then hold "back" button and connect usb, you have to hold both the "back" and "home" buttons, then press the "power" button and in the momen, when screen goes black, immediatley connect usb. Then slide your finger to hold only the "back" button.
Click to expand...
Click to collapse
I thank you sooo very very much ...

I am also trying to recover my phone using pc companion but get download error.
I tried what u said but when i hold back + home and press power the screen does not go black but the menu to switch off or silent or plane mode come up. I hit power off and connected the usb and slid my hand to the back button but still got same download error... any siggestions would be greatly appreciated...rooted u20i 1.1.a.0.12 software i have got

You can use UpdateService : sonyericsson.com/cws/support/phones/topic/updateserviceapplication, is better than PCCompanion.

Make sure u turn off firewall before dwnlding update.
Sent from my E10i using XDA App

Thanks
onetwothree

Thanks mate,just tried your tip using SEUS and it worked (after many tries).

my phone turns on...no black screen as you said
SEUS says my mini is up-to-date and PC Companion says that there's no update available for my mini

thanks
thanks man!!! you're my hero!!!!!!

Mini Pro
albertine said:
You can use UpdateService : sonyericsson.com/cws/support/phones/topic/updateserviceapplication, is better than PCCompanion.
Click to expand...
Click to collapse
Hi,
would this be any different in Mini Pro? I tried to update the FW via SEUS, but its still bricked.

i dunno what 2 do !! =S my phone is bricked already ... and stuck @ Sony ericsson logo .. the 1st one .. when i press on the power button .. the LED the red one goes up 3 times .. am confused what 2 do =S ...

am i the only one who has done everything i could find in this forum and yet can't fix my phone?
I've tried to access xrecovery --> not possible
I've tried re-flashin with x10flash tools --> no can do without the usb debugging activated
I've tried using SEUS --> Only gives me a screen saying my phone is up-to-date but won't let me reinstall it
I can go on flash mode but it's just uselesss since no program can do anything.

App2sd / adb shell/ wi-fi problem
I've rooted my phone and also did the process of put the adb archive in the C:\ to execute by the cmd the program to set up the phone for app2sd.
The problem is: after this i doesn't have the root permissions to change the name of things in the root of the memory, neither access to wi-fi... i tried to undo the app2sd process unninstalling it, but there always a problem to access this file:
/system/bin/sh
Could someone please help me?
Thanks by now.

How i did it
Thank you!
I had big problems with this at first, but then i realised that i had to plug in usb right after i pressed the power button and also right before the vibration. This is in about 2 seconds so i plugged the usb half way at first so that i could insert it the whole way fast, before the vibration.
It's working but after many tries
Thanks again!

Related

[Q] Helpplease !!!! x10 mini bricked

Hello everyone, i'm sorry for my bad English, I accidentally moved the "app" folder from the system to the sd card using root explorer, and I have lost almost all applications (market, root explorer, astro, ecc...), then I try to resolve this problem doing a hard reset , but now the phone goes on and after about 1 minutes goes off again again and again, and I can not stop it. also does not connect to pc .. anyone knows a way to fix it? I think I'll take it in assistance, the phone is still under warranty but it was rooted
Thank you guys
maicolboss said:
Hello everyone, i'm sorry for my bad English, I accidentally moved the "app" folder from the system to the sd card using root explorer, and I have lost almost all applications (market, root explorer, astro, ecc...), then I try to resolve this problem doing a hard reset , but now the phone goes on and after about 1 minutes goes off again again and again, and I can not stop it. also does not connect to pc .. anyone knows a way to fix it? I think I'll take it in assistance, the phone is still under warranty but it was rooted
Thank you guys
Click to expand...
Click to collapse
flash using binarys guide or repair from seus
Unfortunately i can't connect my phone in flash mode...
maicolboss said:
Unfortunately i can't connect my phone in flash mode...
Click to expand...
Click to collapse
they should stick this solution lol
to connect the phone use this:
put the seus ready to repair
connect the cable to phone and pc
press both midle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
reconpt said:
they should stick this solution lol
to connect the phone use this:
put the seus ready to repair
connect the cable to phone and pc
press both midle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
Click to expand...
Click to collapse
You're a genius!!!!.... I thought my phone was dead.... but now is resurrected ... thank you so much!!
reconpt said:
they should stick this solution lol
to connect the phone use this:
put the seus ready to repair
connect the cable to phone and pc
press both midle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
Click to expand...
Click to collapse
Dude, you're a machine - my phone wouldn't power off so i was waiting for it to run flat lol... your post helped a ****load to get my phone repaired.
Thanks!
reconpt said:
they should stick this solution lol
to connect the phone use this:
put the seus ready to repair
connect the cable to phone and pc
press both midle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
Click to expand...
Click to collapse
had the same issue of not being able to connect my phone to pc to repair with seus. thanks loads the "press both midle and right button at the same time and press the power button" trick!!!
I tried your solution but seus just tell me my mini it's up-to-date and there's no more the button for installing anyway android.
The phone just reboots over and over
I seem to have a slightly different problem. I tried the process and right after it said that the phone is connected, the green light on the phone goes out and it looses connection to the phone and prompts me to reconnect. My phone is stuck on the sony ericsson logo, will not shut off and will not boot, can not be detected by the computer. I think I have little more than a very expensive hockey puck.
reconpt said:
they should stick this solution lol
to connect the phone use this:
put the seus ready to repair
connect the cable to phone and pc
press both midle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
Click to expand...
Click to collapse
THANKYOU THANKYOU THANKYOU THANKYOU THANKYOU
Could never live without my phone, thankyou your the best
lije87 said:
I tried your solution but seus just tell me my mini it's up-to-date and there's no more the button for installing anyway android.
The phone just reboots over and over
Click to expand...
Click to collapse
try this mate
http://forum.xda-developers.com/archive/index.php/t-981935.html
I have the same problem SEUS says my phone is "up-to-date" what can we do?
Hey yhis helped me too thanks !
something similiar too...
Hi,
Here is my problem.
I have Xperia x10 mini/ yesterday , but mistake, I installed the firmware of the X10 mini PRO !!!
Now, once I understood the mistake, I want to flash with x10 mini firmware.
In order to flash I need to have FLASHTOOLS and need to press the BACK button - the problem is that since the phone is using now the wrong firmware, the BACK button (needed for the flushing ) doesn’t do anything and thus, I cannot install the correct firmware. I tried pushing all other buttons without any luck.
Any idea how I can overcome this problem ? I can’t use my phone now.
ramimos said:
Hi,
Here is my problem.
I have Xperia x10 mini/ yesterday , but mistake, I installed the firmware of the X10 mini PRO !!!
Now, once I understood the mistake, I want to flash with x10 mini firmware.
In order to flash I need to have FLASHTOOLS and need to press the BACK button - the problem is that since the phone is using now the wrong firmware, the BACK button (needed for the flushing ) doesn’t do anything and thus, I cannot install the correct firmware. I tried pushing all other buttons without any luck.
Any idea how I can overcome this problem ? I can’t use my phone now.
Click to expand...
Click to collapse
The flashmode is initialized before any firmware is loaded, so that isn't your problem
It should always work when your phone is turned off, you press the back-button and attach it to your usb-cable, it should enter flashmode.
If you can't turn it off, connect your phone to your pc, press home and power together till the screen goes black, and then press the back-button.
Well,
I managed to turn the phone off ( using the home+power button), then release the two of them, pressing the BACK button and connecting the USB cable .
nothing hapenns till i release the BACK button and then the phone starts to load with the previous problem.
before installing the the wrong firmware, using the BACK button was OK.
any idea?
update
I managed to hold together the HOME+BACK button and then pushed the POWER button and flashed the E10i 2.1.1 A.0.6 firmware!!!!
while doing it, i noticed for a meesage that the phone is not rooted.
upon finishing the flashing, the phone doesnt boot up, i managed to see the green light and thats all.
i also downloaded the S1 tool in order to root the phone but it says that it can not detect the phone....
what should i do now?
---------- Post added at 01:11 PM ---------- Previous post was at 12:15 PM ----------
update #2
phone doesnt boot up.
when i connect the flashtool i get the message "Device connected in flash mode".
how to continue from that point ?

[Q] Any help for a Xperia x10 mini bricked?.

I've got a Xperia x10 mini, I was trying to unlock it (no success, as you can see). Now I'm capable of doing nothing, my xperia just shows a black screen with the sony ericcson logo on it, can't be switched off (even pressing power button and the button in the middle, it just reboot and come back to the logo) when I try to plug it into my laptop by the normal way (meaning that I remove the cable and put again pressing the button with an arrow), in order to reinstall the ROM, my laptop doesn't get it, the only thing I can get right now is that lousy black screen and I don't know what to do.
Any help out there?
Try Bin4ry flashtool
Sent from my E10i using XDA App
I'm trying but it just say:
Searching for Xperia
Maybe is my ROM version, do you know any tested one?
http://forum.xda-developers.com/showthread.php?t=825664
and you have [HOWTO] if you're unsecure.
Try it with SEUS on another Computer (no Windows XP)
This works for me....
SEUS or Flasher.. same thing, same result
hey, all you need to do is the following:
1- go through the steps of SEUS till you reach the step which tells you to connect your phone to the computer.
2- connect your phone to the computer (even it is still showing just the SE logo.
3- press now (after connecting to computer) the "back buttom" + "mid buttom" + "the power buttom" all togother, then as your phone turn off remove your fingers from the buttoms except the "back buttom"
here the computer will recognise your phone.
4- continue through the rest of the steps
i hope this will help
When you get to the:
"Searching for Xperia..."
Turn off your phone, hold back key (<-) and connect it with PC via USB cable while holding back key. Green light should flash on your notification led.
Just to let you know, dont panic or get fustrated, x10mini cant be that easily bricked, i got same issue like you countless of times (cause im editing/developing custom mod for mine) and Flashing with Bin4ry always bring it back to life. OMG! xMini Zombie!!

[Solved] X10 brick and can't access flash mode

if your x10i brick (SE Logo) and can't reboot can't access xrec and can't access flash mode (for flash generic rom)
i have a solution..
1. connect the phone to PC (USB)
2. open superOneClick v1.55 and click shell root icon
3. open FlashTool 0.2.9.1 and click Ask Root Perms
4. click menu advanced --> clean --> clear cache
5. click xrecovery icon
6. click menu advanced --> Xrecovery--> Reboot into Recovery
7. look you phone.. bingo.. u can access Xrecovery and then just install u favorit custom rom n reboot..
8. now u phone normaly n u can access flash mode to flash generic rom..
and.. sory my english is bad hehe...
jakadewantara said:
if your x10i brick (SE Logo) and can't reboot can't access xrec and can't access flash mode (for flash generic rom)
i have a solution..
1. connect the phone to PC (USB)
2. open superOneClick v1.55 and click shell root icon
3. open FlashTool 0.2.9.1 and click Ask Root Perms
4. click menu advanced --> clean --> clear cache
5. click xrecovery icon
6. click menu advanced --> Xrecovery--> Reboot into Recovery
7. look you phone.. bingo.. u can access Xrecovery and then just install u favorit custom rom n reboot..
8. now u phone normaly n u can access flash mode to flash generic rom..
and.. sory my english is bad hehe...
Click to expand...
Click to collapse
sorry i`m spanish and my english is very bad.
My problem: my x10 cant acces flash mode because pc dont detect the phone. Dont charge, etc... the brick block charge dock, mini usb...any solution please.
try thread from DoomLORD : [DEV][How-To] Get Back to Stock Even With Broken / Damaged USB Port in http://forum.xda-developers.com/showthread.php?t=1054818
tarzerixx said:
sorry i`m spanish and my english is very bad.
My problem: my x10 cant acces flash mode because pc dont detect the phone. Dont charge, etc... the brick block charge dock, mini usb...any solution please.
Click to expand...
Click to collapse
Likely the USB port is dead and you have to send it in for repair.
I used flashtool 3.0, pretended I was gonna flash 2.1 onto it and wella it worked. Your idea fixed my phone Dude. Thanks for the help.
pccobra said:
I used flashtool 3.0, pretended I was gonna flash 2.1 onto it and wella it worked. Your idea fixed my phone Dude. Thanks for the help.
Click to expand...
Click to collapse
Please mention the steps, or link, when i press on shell root(in superone click) it keeps on waiting for device. (flashtool never enables ask for root).
NOTE: It happened when I was trying update my ROM Wolfbreak , I did factory rest and all other resets available on xRec . (xcluding sd card format) then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen. please give me some thoughts to make it in working mode again
Thanks
RedAxe said:
Please mention the steps, or link, when i press on shell root(in superone click) it keeps on waiting for device. (flashtool never enables ask for root).
NOTE: It happened when I was trying update my ROM Wolfbreak , I did factory rest and all other resets available on xRec . (xcluding sd card format) then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen. please give me some thoughts to make it in working mode again
Thanks
Click to expand...
Click to collapse
Hapenned the same to me...
I try to follow the steps, but i can't pass step 4 (it's unavaiable the "clean cache" bottom...)
Please help...
Restore original firmware with SEUS
RedAxe said:
...then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen...
Click to expand...
Click to collapse
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
do u have trick for my problem here forum.xda-developers.com/showthread.php?t=1388476
my x10 just vibrate once and stack on blank screen.
Sent from my X10i using Tapatalk
When I use SEUS It keep saying "You have the newest software available"
I tried the hard reset and all. The phone now just won't start at all
Hi,
i got the same problem what you describe ive stuck at the SE logo and cant get into recovery and i cant use flashtool. i tried to do what you say in the first post, but when i press the shell root button, it says "wait for device" then its not responding, and i cant moce on to the next step... what should i do now?
Ketoth said:
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
Click to expand...
Click to collapse
u totally saved me =D
X10 mini revived!
Hi,
The procedure described above works fine until you've the phone recognized by the computer.
Here's how It has finally been recognized:
1) Completely switch off the phone (Do not leave it with SE logo).
-You can do the either by removing the battery connector (be cautious) under a rubber on the left(not above) of the camera lens.
-OR when the USB is plugged in,
(1.1) press center + back + power button until power off,
(1.2) then release center and power button AND KEEP back button down(about 2-5 seconds) until green led lights on. remark:LED will stay green until you unplug USB or phone switches on.
(1.3) Unplug USB.
Your phone should be OFF now. SE logo doesn't appear anymore (Wait 30s to be sure)
2) Unplug the USB cable from computer and plug it in another USB port of the PC.
3) At this time, if you plug USB on your X10 mini, it should be recognized as a SEMC device (It has worked for me).
-Success? Go step 4
-Failure, retry (from step 2 should be enough) with another USB port. If you've tryied all ports already, I've no idea.
4) If step 3 is successful, unplug USB.
5) Start SEUS (update service program from SE), choose you phone, follow the instructions on screen. Remark: Even if it says that you've got the last version, there is an "Install" button available on the bottom right corner. Click it!
Hope it'll help.
deBelch.
PS: Many thanks the whole forum for the help provided.
hello guys..my se xperia x10 mini pro stuck on the SE logo..and i tried to press power+ home button but it din't change anything.It also give 0.3sec led green flash while pressing the power and the menu button.can anyone plz help me with this..???
cruzstar said:
hello guys..my se xperia x10 mini pro stuck on the SE logo..and i tried to press power+ home button but it din't change anything.It also give 0.3sec led green flash while pressing the power and the menu button.can anyone plz help me with this..???
Click to expand...
Click to collapse
Update phone using SEUS....
Just google SUES
Definitely it will work....
Sent from my X10i using xda premium
yea i have use the SEUS..by pressing the back button..but it dont work..plz help me
Dear sir i already done that procedures but no use in seus shown u already updater software. plz help me
Cannot unbrick xperia mini E10i
Ketoth said:
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
Click to expand...
Click to collapse
Hello Guys,
I need your urgent help.
I cannot restore phone with SEUS or Companion. It says I already have the soft.
Getting fatal errors in Flashtool, I am stuck with SE logo and bootloader relocked.
I have the stock kernel but CM7 ROM.
Do you have any other ideas?
Tanks a lot!
deBelch said:
Hi,
The procedure described above works fine until you've the phone recognized by the computer.
Here's how It has finally been recognized:
1) Completely switch off the phone (Do not leave it with SE logo).
-You can do the either by removing the battery connector (be cautious) under a rubber on the left(not above) of the camera lens.
-OR when the USB is plugged in,
(1.1) press center + back + power button until power off,
(1.2) then release center and power button AND KEEP back button down(about 2-5 seconds) until green led lights on. remark:LED will stay green until you unplug USB or phone switches on.
(1.3) Unplug USB.
Your phone should be OFF now. SE logo doesn't appear anymore (Wait 30s to be sure)
2) Unplug the USB cable from computer and plug it in another USB port of the PC.
3) At this time, if you plug USB on your X10 mini, it should be recognized as a SEMC device (It has worked for me).
-Success? Go step 4
-Failure, retry (from step 2 should be enough) with another USB port. If you've tryied all ports already, I've no idea.
4) If step 3 is successful, unplug USB.
5) Start SEUS (update service program from SE), choose you phone, follow the instructions on screen. Remark: Even if it says that you've got the last version, there is an "Install" button available on the bottom right corner. Click it!
Hope it'll help.
deBelch.
PS: Many thanks the whole forum for the help provided.
Click to expand...
Click to collapse
nope...didnt work...there is NO Install beneath...wonder why? is it i am using the latest SEUS?
greetings. please i followed your steps to unbricked my device but my x10 cant boot into flash-mode. whenever i try to connect it via flash-tool. the green light comes on but in some few seconds it boot automatically. and when i try to flash anything it boot automatically. please help me
---------- Post added at 12:21 AM ---------- Previous post was at 12:16 AM ----------
greetings. please i followed your steps to unbricked my device but my x10 cant boot into flash-mode. whenever i try to connect it via flash-tool. the green light comes on but in some few minutes it boot automatically. and when i try to flash anything it boot automatically. please help me

[Help] Need to hard reset SE Xperia X10 Mini

SE Xperia X10 Mini, Rooted, XRecovery loaded, Andread 2.2.1.
Now won’t boot properly. Can sometimes get past the swipe unlock screen to be confronted by:
“The application Home (process com.sonyericsson.home) has stopped unexpectedly. Please try again. Force Close”
And
“The process com.android.phone has stopped unexpectedly. Please try again. Force Close”
Is there anyway to do a proper hardware only hard reset on the mini as obviously can't select anything from the menu ?
All the information I’ve found so far just uses the Power and Home buttons to switch it off/on. No help.
SE PC companion won’t link to upgrade as I can’t press any buttons on the mini.
I don’t hold out much hope for the FlashTool if it also requires buttons to be pressed on the device.
On most other devices you can at least remove the battery but not with this.
Just so we are clear, there is no way to brick an x10 mini. now flashtool will always work unless there is a physical defect with the phone...in which case your done. basically download flashtool (use search function) and read instructions for it(use search function). it only requires you to turn off your phone and hold back as you plug it in so there is almost no way for a device not to be able to do this.
I followed the FlashTool instructions, held down the back button but no joy. No green LED on device, no recognition on FlashTool.
I don't think the mini is turning off properly.
The only way I can turn it off is to hold the home and power buttons for 3-4 sec, but usually it restarts immediatly.
Is there another way to properly switch off/on?
g.rommit said:
I followed the FlashTool instructions, held down the back button but no joy. No green LED on device, no recognition on FlashTool.
I don't think the mini is turning off properly.
The only way I can turn it off is to hold the home and power buttons for 3-4 sec, but usually it restarts immediatly.
Is there another way to properly switch off/on?
Click to expand...
Click to collapse
take a good look, the green LED should flash atleast ONCE....i had the problem when i was new to rooting and installing ROMS.....do this...
1. make your deskie/lappy fully prepared to flash your phone by SEUS, only requiring you to connect the phone in flash mode (even keep your USB to phone cord inserted to the computer)
2. power off the phone by holding the home+power key (& keep holding them, now press the back button).
3.release the power key but KEEP HOLDING THE HOME KEY and the back key...(if you release the home key, the cell will restart).
4. now connect the phone to the computer and hopefully it will connect in flash mode
hope this helps in solving your problem
if i helped you, kindly press the "THANKS" button
In my case, I found that keeping the usb cable plugged into the phone was a problem. So I kept the usb cable plugged into the pc but uplugged from the phone end till flashtool asked me to start the phone in flash mode. Another problem I had was of the drivers when the phone started in flash mode even though I had PCCompanion installed. I had to install the flash mode drivers from the ggsetup-2.2.0.10.exe file which was in the drivers folder under the FlashTool install folder.
Use SEUS! Its better!
Solved! Now working back in SE Android 2.1 state. Rooting, new ROM etc tomorrow.
I found a reference online that described a small rubber panel to the left of the camera lens that gives access to the battery connector and allowed me to disconnect that battery. I could then keep it switched off until ready for the power/back button/connect USB juggling act that the SE Update Service application required in order to reload Android 2.1.
Thanks for all the replies and suggestions.

[Q]soft brick

hey all, i have a small brick with my x10 mini
currently the phone it stuck at the sony ericsson screen
and when i connect my phone with SEUS, it just tells me to mount the phone but since its stuck on the sony ericsson screen, i can't do that
what do i have to do to restore the stock 2.1 onto my x10 mini?
thanks~
Listen tu me...
Do you have installed flashtool, if you have then you must go to the Drivers folder and install the gg-setuup... something like that is called... Install it... then put the phone into flash mode with two buttons... middle button below the keyboard where the three keys... button to turn on the cell phone... These two buttons are pressed and keeps... pres the thanks button if i helped you...
well the problem i'm having is that the phone will not turn off since its stuck at that screen
so i can't boot it into flashmode @[email protected]'
lil-devil said:
well the problem i'm having is that the phone will not turn off since its stuck at that screen
so i can't boot it into flashmode @[email protected]'
Click to expand...
Click to collapse
Not sure tho.. Connect your phone to pc.. Then give adb reboot command ( considering you know what ia adb ) your phone will reboot ( as u mini.,i guess u cannot pull out ur phone battery )
Sent from my U20i using xda premium
no i can't pull the battery out, or i would of already >.<;
and i can't give it adb commands because during the bootup screen the adb function is not enabled yet otherwise i could use the flashtool to do it =/
Listen tu me...
put the phone into flash mode with two buttons... middle button below the keyboard where the three keys... button to turn on the cell phone... These two buttons are pressed and keeps... pres the thanks button if i helped you... I had the same problem... I solve it so I put cell phone in flash mode with two buttons that I have mentioned...
i took the phone a part slightly so i was able to access the battery to disconnect it
and i tried to boot the phone into recovery or flashboot and i wasn't able to
i tried power + down volume key
and power + home key
wasn't able to get in
does anyone have any idea?
Thanks~
I'm with the same problem, but the recovery nor flashmode is accessible :/
follow this step..
http://forum.xda-developers.com/showthread.php?t=981935

Categories

Resources