Hello everyone, i'm sorry for my bad English, I accidentally moved the "app" folder from the system to the sd card using root explorer, and I have lost almost all applications (market, root explorer, astro, ecc...), then I try to resolve this problem doing a hard reset , but now the phone goes on and after about 1 minutes goes off again again and again, and I can not stop it. also does not connect to pc .. anyone knows a way to fix it? I think I'll take it in assistance, the phone is still under warranty but it was rooted
Thank you guys
maicolboss said:
Hello everyone, i'm sorry for my bad English, I accidentally moved the "app" folder from the system to the sd card using root explorer, and I have lost almost all applications (market, root explorer, astro, ecc...), then I try to resolve this problem doing a hard reset , but now the phone goes on and after about 1 minutes goes off again again and again, and I can not stop it. also does not connect to pc .. anyone knows a way to fix it? I think I'll take it in assistance, the phone is still under warranty but it was rooted
Thank you guys
Click to expand...
Click to collapse
flash using binarys guide or repair from seus
Unfortunately i can't connect my phone in flash mode...
maicolboss said:
Unfortunately i can't connect my phone in flash mode...
Click to expand...
Click to collapse
they should stick this solution lol
to connect the phone use this:
put the seus ready to repair
connect the cable to phone and pc
press both midle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
reconpt said:
they should stick this solution lol
to connect the phone use this:
put the seus ready to repair
connect the cable to phone and pc
press both midle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
Click to expand...
Click to collapse
You're a genius!!!!.... I thought my phone was dead.... but now is resurrected ... thank you so much!!
reconpt said:
they should stick this solution lol
to connect the phone use this:
put the seus ready to repair
connect the cable to phone and pc
press both midle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
Click to expand...
Click to collapse
Dude, you're a machine - my phone wouldn't power off so i was waiting for it to run flat lol... your post helped a ****load to get my phone repaired.
Thanks!
reconpt said:
they should stick this solution lol
to connect the phone use this:
put the seus ready to repair
connect the cable to phone and pc
press both midle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
Click to expand...
Click to collapse
had the same issue of not being able to connect my phone to pc to repair with seus. thanks loads the "press both midle and right button at the same time and press the power button" trick!!!
I tried your solution but seus just tell me my mini it's up-to-date and there's no more the button for installing anyway android.
The phone just reboots over and over
I seem to have a slightly different problem. I tried the process and right after it said that the phone is connected, the green light on the phone goes out and it looses connection to the phone and prompts me to reconnect. My phone is stuck on the sony ericsson logo, will not shut off and will not boot, can not be detected by the computer. I think I have little more than a very expensive hockey puck.
reconpt said:
they should stick this solution lol
to connect the phone use this:
put the seus ready to repair
connect the cable to phone and pc
press both midle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
Click to expand...
Click to collapse
THANKYOU THANKYOU THANKYOU THANKYOU THANKYOU
Could never live without my phone, thankyou your the best
lije87 said:
I tried your solution but seus just tell me my mini it's up-to-date and there's no more the button for installing anyway android.
The phone just reboots over and over
Click to expand...
Click to collapse
try this mate
http://forum.xda-developers.com/archive/index.php/t-981935.html
I have the same problem SEUS says my phone is "up-to-date" what can we do?
Hey yhis helped me too thanks !
something similiar too...
Hi,
Here is my problem.
I have Xperia x10 mini/ yesterday , but mistake, I installed the firmware of the X10 mini PRO !!!
Now, once I understood the mistake, I want to flash with x10 mini firmware.
In order to flash I need to have FLASHTOOLS and need to press the BACK button - the problem is that since the phone is using now the wrong firmware, the BACK button (needed for the flushing ) doesn’t do anything and thus, I cannot install the correct firmware. I tried pushing all other buttons without any luck.
Any idea how I can overcome this problem ? I can’t use my phone now.
ramimos said:
Hi,
Here is my problem.
I have Xperia x10 mini/ yesterday , but mistake, I installed the firmware of the X10 mini PRO !!!
Now, once I understood the mistake, I want to flash with x10 mini firmware.
In order to flash I need to have FLASHTOOLS and need to press the BACK button - the problem is that since the phone is using now the wrong firmware, the BACK button (needed for the flushing ) doesn’t do anything and thus, I cannot install the correct firmware. I tried pushing all other buttons without any luck.
Any idea how I can overcome this problem ? I can’t use my phone now.
Click to expand...
Click to collapse
The flashmode is initialized before any firmware is loaded, so that isn't your problem
It should always work when your phone is turned off, you press the back-button and attach it to your usb-cable, it should enter flashmode.
If you can't turn it off, connect your phone to your pc, press home and power together till the screen goes black, and then press the back-button.
Well,
I managed to turn the phone off ( using the home+power button), then release the two of them, pressing the BACK button and connecting the USB cable .
nothing hapenns till i release the BACK button and then the phone starts to load with the previous problem.
before installing the the wrong firmware, using the BACK button was OK.
any idea?
update
I managed to hold together the HOME+BACK button and then pushed the POWER button and flashed the E10i 2.1.1 A.0.6 firmware!!!!
while doing it, i noticed for a meesage that the phone is not rooted.
upon finishing the flashing, the phone doesnt boot up, i managed to see the green light and thats all.
i also downloaded the S1 tool in order to root the phone but it says that it can not detect the phone....
what should i do now?
---------- Post added at 01:11 PM ---------- Previous post was at 12:15 PM ----------
update #2
phone doesnt boot up.
when i connect the flashtool i get the message "Device connected in flash mode".
how to continue from that point ?
Related
Hello, Im trying to flash my phone with Jerpelea`s tutorial, but I cant put this phone in Flash mode, it says to hold the Back button after power it off, but it seems to have no effect at all...
also hold the back buttom while powering the phone doesnt work...
can someone help me please??
Hold back button down first then plug USB in and continue to hold back button
Hello A have the same problem is there a other whay?
Thanks
you have to switch the phone off.. take out the battery for 5 seconds (min).. then.. this is the bit you need three hands for... you need to hold the back button whilst plugging in the USB cable.. continue to hold the back button until the software tells you to let go..
Whill this work for de x10i ??
Resisting the temptation for sarcasm....
Yes, it's the x10i method.
Sent from my X10i
Sorry, I don't understand.. because on my x10 with froyo beta2 hotfix1 of zdzihu, this method does not work...
Italiano38 said:
Sorry, I don't understand.. because on my x10 with froyo beta2 hotfix1 of zdzihu, this method does not work...
Click to expand...
Click to collapse
There is only only method for the X10a/i/mini/mini pro/1.6/2.1/2.2 into flashmode, as Mr Iceman has already explained, if it doesn't work for you you're doing something wrong or your phone is broke. To save having to use 3 hands, plug the lead into the phone first, then attaching it to the PC is a much simpler task.
Oki, thank you, I will test it later because I have a bigger problem like I said here: http://forum.xda-developers.com/showthread.php?p=10781800#post10781800
Is this method work for the latest xperia mini pro[SK17i] ?? pliz.. im newbie here..
My xperia sola cannot be put into into flashmode. as i connect the usb while holding the volume down key the green light appear and after 5 seconds the green light is out and change to red one and the phone shows the sony logo.
please help me how to install or connect my xperia sola to flash mode. tnx
tsoytsoy1880 said:
My xperia sola cannot be put into into flashmode. as i connect the usb while holding the volume down key the green light appear and after 5 seconds the green light is out and change to red one and the phone shows the sony logo.
please help me how to install or connect my xperia sola to flash mode. tnx
Click to expand...
Click to collapse
Xperia sola is different than x10
so if you ask in xperia S forums you will get your answer
Teio said:
Hello, Im trying to flash my phone with Jerpelea`s tutorial, but I cant put this phone in Flash mode, it says to hold the Back button after power it off, but it seems to have no effect at all...
also hold the back buttom while powering the phone doesnt work...
can someone help me please??
Click to expand...
Click to collapse
Hey Teio, check if that video works for you, avoid all the information just pay attention on the hardware process:
Turn off phone or take out battery
Conect your USB cable to PC
Open Flashtool
Select Kernel that you wanna flash
Wait for pop up message
Connect your phone
Hold back button
Re Insert Battery
Put Xperia x10 in flash mode
Regards
Press volume down button
radiation626 said:
Is this method work for the latest xperia mini pro[SK17i] ?? pliz.. im newbie here..
Click to expand...
Click to collapse
Since back key is feather touch button it won't work while phone is switched off....., So those phone you should press volume down button instead...
vijay.pushkin said:
Since back key is feather touch button it won't work while phone is switched off....., So those phone you should press volume down button instead...
Click to expand...
Click to collapse
I have the same problem, this metod don´t work in the xperia mini pro[SK17i], 'press volume down button' isn´t recognized
whit a command according to forum 'supported devices' . How can i flash this model of xperia now?
Hi, i've just bricked my x10 mini (wanted to edit framework-res.apk and did something wrong)
I still can see it under adb, but if i try to enter su mode to recover old file, i'm getting errors stopped(signa), segmentation fault.
If i try to recover it via seus, i can't connect the phone, coz i need to have "back" button pressed when connecting usb, but i can't turn device off. Only restart with "home" plus "power" buttons...
What am i to do?
[SOLVED]
I've managed to recover it via PC - Companion. When it says, that you have to power off the phone, then hold "back" button and connect usb, you have to hold both the "back" and "home" buttons, then press the "power" button and in the momen, when screen goes black, immediatley connect usb. Then slide your finger to hold only the "back" button.
dopeless said:
[SOLVED]
I've managed to recover it via PC - Companion. When it says, that you have to power off the phone, then hold "back" button and connect usb, you have to hold both the "back" and "home" buttons, then press the "power" button and in the momen, when screen goes black, immediatley connect usb. Then slide your finger to hold only the "back" button.
Click to expand...
Click to collapse
I thank you sooo very very much ...
I am also trying to recover my phone using pc companion but get download error.
I tried what u said but when i hold back + home and press power the screen does not go black but the menu to switch off or silent or plane mode come up. I hit power off and connected the usb and slid my hand to the back button but still got same download error... any siggestions would be greatly appreciated...rooted u20i 1.1.a.0.12 software i have got
You can use UpdateService : sonyericsson.com/cws/support/phones/topic/updateserviceapplication, is better than PCCompanion.
Make sure u turn off firewall before dwnlding update.
Sent from my E10i using XDA App
Thanks
onetwothree
Thanks mate,just tried your tip using SEUS and it worked (after many tries).
my phone turns on...no black screen as you said
SEUS says my mini is up-to-date and PC Companion says that there's no update available for my mini
thanks
thanks man!!! you're my hero!!!!!!
Mini Pro
albertine said:
You can use UpdateService : sonyericsson.com/cws/support/phones/topic/updateserviceapplication, is better than PCCompanion.
Click to expand...
Click to collapse
Hi,
would this be any different in Mini Pro? I tried to update the FW via SEUS, but its still bricked.
i dunno what 2 do !! =S my phone is bricked already ... and stuck @ Sony ericsson logo .. the 1st one .. when i press on the power button .. the LED the red one goes up 3 times .. am confused what 2 do =S ...
am i the only one who has done everything i could find in this forum and yet can't fix my phone?
I've tried to access xrecovery --> not possible
I've tried re-flashin with x10flash tools --> no can do without the usb debugging activated
I've tried using SEUS --> Only gives me a screen saying my phone is up-to-date but won't let me reinstall it
I can go on flash mode but it's just uselesss since no program can do anything.
App2sd / adb shell/ wi-fi problem
I've rooted my phone and also did the process of put the adb archive in the C:\ to execute by the cmd the program to set up the phone for app2sd.
The problem is: after this i doesn't have the root permissions to change the name of things in the root of the memory, neither access to wi-fi... i tried to undo the app2sd process unninstalling it, but there always a problem to access this file:
/system/bin/sh
Could someone please help me?
Thanks by now.
How i did it
Thank you!
I had big problems with this at first, but then i realised that i had to plug in usb right after i pressed the power button and also right before the vibration. This is in about 2 seconds so i plugged the usb half way at first so that i could insert it the whole way fast, before the vibration.
It's working but after many tries
Thanks again!
Hi all. I have multiple problems in my x10i.it has 2.1 It was rooted and worked fine..few days ago I tried to wipe the phone and did the master reset via xrecovery ..after the restart it just hanged at the boot logo and xrecovery is not working from then....I wanted to update with SEUS via USB... but the phone is not connecting as well...What should I do? PLZ HELP ME GUYZ........
Hi,
Seus doesn't recognize your x10 even if you hold back button while plugging usb (flash mode) ?
This week my x10 2.1 crashed (I suppose it was because of rooting with superoneclick without rebooting immediatly), and wasn't recognized by windows. It was in a loop turnig on/off and only putting off battery could turn it off really. Big Problem.
The only solution I found : putting off battery, pluggin usb cable, holding back button and putting on battery. Back button still hold (like flash mode) until seus recognize x10. Then it runs alone and install rom (after I rooted with flashtools and launched jit optimisation, witch increase truely x10 performances!).
Probably seus not recognize your phone because you have a rooted and custom firmware in your x10 and xrecovery is not working because you did a reset and then you delete some files from your phone, you can reinstall it with the x10flashtool or to make a complete restore firmware whit the same x10flashtool
If SEUS/PCC doesn`t recognize your phone, remove them from PC and reinstall them.
You have an USB driver problem
ohm74 said:
Hi,
Seus doesn't recognize your x10 even if you hold back button while plugging usb (flash mode) ?
This week my x10 2.1 crashed (I suppose it was because of rooting with superoneclick without rebooting immediatly), and wasn't recognized by windows. It was in a loop turnig on/off and only putting off battery could turn it off really. Big Problem.
The only solution I found : putting off battery, pluggin usb cable, holding back button and putting on battery. Back button still hold (like flash mode) until seus recognize x10. Then it runs alone and install rom (after I rooted with flashtools and launched jit optimisation, witch increase truely x10 performances!).
Click to expand...
Click to collapse
nope, phone is not connecting in flash mood..i pulled of the battery and did as u said,,nothings working ......
Take the phone with the warranty for repairing.
mistake_man said:
Probably seus not recognize your phone because you have a rooted and custom firmware in your x10 and xrecovery is not working because you did a reset and then you delete some files from your phone, you can reinstall it with the x10flashtool or to make a complete restore firmware whit the same x10flashtool
Click to expand...
Click to collapse
one more thing....i checked the device manager se drivers r working f9.....when i connect phone via usb cable the green light automatically turns on....even b4 i press back key
iMatth3w said:
Take the phone with the warranty for repairing.
Click to expand...
Click to collapse
I bought it from ebay ...no warrenty... think thats stupid :/
rumanbsl said:
nope, phone is not connecting in flash mood..i pulled of the battery and did as u said,,nothings working ......
Click to expand...
Click to collapse
Did you wait for at least 30 seconds before putting battery inside phone (to make sure clearing all memories? And sure you hold back button before, during and after?
Otherwise, what does happen if you press and hold volume button before turning on the phone (and keep volume button hold)?
rumanbsl said:
one more thing....i checked the device manager se drivers r working f9.....when i connect phone via usb cable the green light automatically turns on....even b4 i press back key
Click to expand...
Click to collapse
Well your usb is definitly working then as its glowin green?..
Are you sure you are doing it all right? It happened the same to me, and it ended I was pressing the wrong buttom (I knew which one was the correct one, but was blind cause I was scared that Ive broke it totally), a day later I noticed it and I was able to flash my phone.
However, read a guide and follow it step by step, reinstall everything and start from beginning maybe?
Or use the repair function with PC Companion
Hi! I had the same problem!
1. Search and download from this forum Flashtool 0.2.6
2. Install it.
3. Download from this forum one generic ROM (for exemple X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897 )
4. Put the file in directory Flashtool/firmware
5. Launch X10flashtool.exe
6. DO NOT PUT THE USB CABLE IN THE PHONE
7.From option "flash select the desired ROM
8. Wait the program to begin(a picture will appear)
9. Pressing the back button, insert the usb cable.
10. Wait the flashing to begin and release the back button.
Follow instructions and WAIT around 5 minutes until flashing will complete
11. Send me two words if it helps you! Success!
ohm74 said:
Did you wait for at least 30 seconds before putting battery inside phone (to make sure clearing all memories? And sure you hold back button before, during and after?
Otherwise, what does happen if you press and hold volume button before turning on the phone (and keep volume button hold)?
Click to expand...
Click to collapse
I've did everything as u told.....no luck ! guess its the time to go to repair center...btw a guy from help center told me about software tampered,,!!out of luck
Hi,
I would like to ask you for advice before throwing my X10 mini away and buying something else.
I have had MiniCM7 installed for a very long time (more than a year), and upgraded to all versions without any problem. Today I installed MiniCM9 3.0.2, but I decided to reinstall MiniCM7 because of some problems detected with this version, so I went to SEUS, downgraded to 2.1.1.A.0.6, installed BusyBox, xMiniRecovery, root and flashed MiniCM7 2.2.0 and gapps. I have done it quite a lot of times before.
But, when I tried to reboot onto MiniCM7 2.2.0, my phone was stuck onto Sony Ericsson logo. Here's what I did:
1) Ok, Home+Power and reenter into recovery by pressing back key. No, no luck, it doesn't enter into any recovery.
2) B plan, I'll go to SEUS again. Home+Power, connect USB and keep back key pressed. Nothing, SEUS doesn't recognize anything, but Companion does activate a little popup on my Windows, as if it detects my phone plugged into my computer. No red, yellow, or green lights in the phone.
3) C plan. Flash kernel directly. I downloaded kernel from http://forum.xda-developers.com/showthread.php?p=17674938#post17674938 and used FlashTool. But, again, when I press Home+Power, connect the USB cable and press back key, it doesn't recognize anything, FlashTool is waiting for me to connect something. Antivirus is disabled.
If I keep back key pressed, no SE logo appears; black screen. If I release back key for a little while, SE logo appears and it gets stuck.
Both if I connect it to the computer or to the power socket, no green/yellow/red led appears.
Does anybody have any idea? Everything (cable and phone) were working wonderfully before flashing 2.1.1.A.0.6 for the last time.
Kind regards,
Jordi
Ok,before u try this u should know it will delete everything of phone memory:apps,contacts,etc.
And it removes root and recovery and phone will be like the day u bought it except that bootloader is not touched if unlocked stays unlocked
TRY AT UR OWN RISK
Steps:
1-download sony erricsson pc companion
2-click support zone and choose software update
3-before clicking continue click on repair phone
4-wait till loads and choose phone type
5-concentrate on this one cuz it has 2 methods
5a:if ur phone doesent restart automaticlly just plug usb in computer first then with phone powered off hold the back button and connect the usb cable only let hold when it says u can
5b:if ur phone DOES restart automaticlly remove battery till u reach this step and put back cover bedside till ur done with this method what were gonna do is when we reach this step we quickly plug battery and before it restarts just hold back and insert usb cable.
6-wait to install
7-congratulations unbricking
8-(optional):click the thanks button :xD
Sent from my U20i using XDA
Hi,
Thank you very much for your quick answer. I had never realized the procedure shown in steps 2-4.
But Companion refuses to install it! "It's impossible to install or setup update components of phone sotfware" grrrrrrrrrrrrr Tomorrow I'll try to get another computer and follow your procedure.
Thank you very much
Always happy to help as ive been in such issues alot
Sent from my U20i using XDA
You say you have an X10 Mini, and not an X1O Mini-Pro.
The X10 Mini requires you to run the nAa-kernel in order to run the latest verstion of MiniCM7.
You say you downgraded back to stock firmware and installed MiniCM7 again, did you forget about the kernel?
SmG67 said:
You say you have an X10 Mini, and not an X1O Mini-Pro.
The X10 Mini requires you to run the nAa-kernel in order to run the latest verstion of MiniCM7.
You say you downgraded back to stock firmware and installed MiniCM7 again, did you forget about the kernel?
Click to expand...
Click to collapse
Aaaaaaaaaaaaaaaaarghhhhhh you are right!!!!!!! I have installed kernels and versions a lot of times on my device, and I was so confident of myself that this time I didn't realize I was missing one of the most important steps!!!!!!!!!!!!!!! So stupid of me.......!!!!!!!
I've tried PC Companion as suggested before, but no way: it doesn't detect the "flash mode" at boot time. I keep pressing Back key and I only get a black screen; when I release Back key, SE logo appears and gets stuck forever. It doesn't matter if I try SEUS, PCCompanion or FlashTool, it's always the same. I can't shut it down, just restart over and over again via Home+Power.
Does anybody know what can I do?
Kind regards,
Jordi
jordisegurapla said:
Aaaaaaaaaaaaaaaaarghhhhhh you are right!!!!!!! I have installed kernels and versions a lot of times on my device, and I was so confident of myself that this time I didn't realize I was missing one of the most important steps!!!!!!!!!!!!!!! So stupid of me.......!!!!!!!
I've tried PC Companion as suggested before, but no way: it doesn't detect the "flash mode" at boot time. I keep pressing Back key and I only get a black screen; when I release Back key, SE logo appears and gets stuck forever. It doesn't matter if I try SEUS, PCCompanion or FlashTool, it's always the same. I can't shut it down, just restart over and over again via Home+Power.
Does anybody know what can I do?
Kind regards,
Jordi
Click to expand...
Click to collapse
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
SmG67 said:
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
Click to expand...
Click to collapse
I've tried that already, doesn't work...
Looks bad, huh???
SmG67 said:
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
Click to expand...
Click to collapse
I do not know what did I do, but by trying for the 1000th time to do the Home+Power+Back key combination with USB connected and keeping Back key pressed, and pressing and releasing it madly afterwards, while FlashTool was waiting for me to flash MiniCM7, FlashTool has reacted!!!!!! It allowed me to install MiniCM7 again!!!
What happened? I do not know, perhaps I pressed Back key just the microsecond that the hardware needed it.
Thank you very much!!!!
hahaha, cool And here i was thinking you were trying to flash the kernel, lol
But good luck
SmG67 said:
hahaha, cool And here i was thinking you were trying to flash the kernel, lol
But good luck
Click to expand...
Click to collapse
Ok, you are right again; FlashTool allowed me to install the kernel ;-) and then, everything else.
Thank you very much, really!!!
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
bokivaol said:
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
Click to expand...
Click to collapse
Happened to me b4 if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
Leave your phone plugged in and press POWER-HOME and BACK all together, as soon as the screen turns completelly black (backlight off too) releast POWER and HOME, and leave the back-button pressed, that will probably work too.
LukBoy99 said:
if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
Click to expand...
Click to collapse
Can you explain me a little more detailed, i didn't get you very well. I am noob
How do you mean until I reach connection step, where should I reach connection step?
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
SmG67 said:
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
Click to expand...
Click to collapse
It doesn't work.
I tried and POWER-BACK-HOME buttons while the phone is plugged in (turned off and turned on), same sh..t. Phone starts like that I powered it on
stitypta had
What do you think, what will happened if I wipe it using CWM? Can I brick it on that way?
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
SmG67 said:
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
Click to expand...
Click to collapse
Does this mean that I have hardware problem. Phone works without any problem.
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
SmG67 said:
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
Click to expand...
Click to collapse
I didn't flashed it before, I couldn't do that. I couldn't unlock bootloader, because I couldn't boot it in flash mode (phone just show that battery charging), after installing CWM now phone even don't show that battery is charging (it turns on when I plug in USB in the phone without holding any button). This is nightmare!
You are still on the original firmware then?
I mean, your phone still works?
SmG67 said:
You are still on the original firmware then?
I mean, your phone still works?
Click to expand...
Click to collapse
Yes, I am on original firmware and phone still works, but I have problem to boot it in flash mode. When I plug in USB cable in the phone it turns on, like that I pressed POWER button. I don't press any button, but when I plug in usb cable 10-20 seconds and phone is on.
Yes, because your phone detects the usb-cable getting plugged in, even when it's off, it thinks you want to charge it, so (normally) it loads the kernel in order to start the charging-process, that is normal behaviour. I have been on a kernel that didn't support that feature, and it booted into the full rom before it started charging.
In short: the usb-port also functions as a power-button, sort off
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
Yes, the back button works perfect, closing apps (not close apps, but back to the phones "desktop"), back to previous pages in browser...
I am concerned because, before I installed CWM , when it was OFF and plugged in on USB, phone just showed black screen and when I clicked on some button I could see that battery is charging, that was all. Now, when I plug in USB it turns on like I pressed POWER button.
And off course never booted in flash mode because it turns on
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
What is app-drawer, I don't know what is that.
oh, that's the bit where you find all your installed apps, the grid you see when you press on the little triangle on the bottom of your desktop, or swipe up on the desktop.
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
SmG67 said:
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
Click to expand...
Click to collapse
I solved problem about POWER-ing on when I plug in USB. I installed new ROM "MiniCM7Pro_V21_Paul_XXX" via CWM because I didn't need to boot it in flash mode and now when I plug in USB I got that it charging battery and orange led diode.
But I can't boot it in flash mode even with new ROM, all the time orange led diode when I hold back button and plug in USB. I wiped out all date except something about "battery" from Advanced CWM options.
bokivaol said:
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Click to expand...
Click to collapse
i dont have time to read if this was resolved but you need to leave your phone of for about 2 min the little bugger holds a charge for quit a bit you got one of the newer ones like mine i got this info from sony website at least 30sec power off before attempting to do the above steps also i do know how to get the phone out of this refer to the this thread http://forum.xda-developers.com/showthread.php?t=1635286&page=2 i only know this cause iam you !! lol as soon as i find a stock rom boom i am
http://minus.com/lbg0XZRW728Kwu ling for stock rom bro
follow step for step with the referance link above to reflash stock rom thanks that dude that told me
and it works cause i rebricked it lol i reflashed the same rom that did this to my phone and so far all above steps in referance link seem to be working"
http://forum.xda-developers.com/showthread.php?t=1636504 follow to the t you hav i.c.s 4.0 i guess works like a charm ! between both guides 25 min !!! yesterday i put 7hrs !! enjoy bro and thank thank the guys that root me they are the true credit iam just passing the info on too you that i got from both guides. look at my post and you will see i had this problem follow these steps and you will be fine remeber firs boot is the longest
best thing that ever happened to me was i bricked my my xperia mini pro u20 haha got ics out it lol