Related
Been searching for another screen protector but my Expert Shield is peeling from the front camera section due to the **** design of the screen protector.
Been looking on eBay and they have alot of generic ones, like 3 packs or something for $5 dollars.
Stuff like these.
http://cgi.ebay.com.au/3-Screen-pro...3286.c0.m14&_trkparms=66:2|65:1|39:1|240:1318
Has anyone actually used them? Are they really worth the hassle or just bite the bullet and spend more on a better brand.
The Expert Shield cost a fair bit, but it is too bad it's peeling off.
i have bought the followings:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=220372166644
and
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=270355890539
and
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=300296896070
and
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=250367478475
and waiting for this
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=370174439118
and they all look like the stock one but all of them are a bit short from the top and bottom and they all from the same manufacture as they look and measure exactly the same except for the ones in the first link have a very weird V cut on the earpiece and not a round cut just like the rest..
i would say it's better to get a brand name product that would fit the phone exactly without any shortage in the size... and i think at the end i will just buy IS as i had it on my diamond and it fit good!
and waiting for this
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=370174439118
and they all look like the stock one but all of them are a bit short from the top and bottom and they all from the same manufacture as they look and measure exactly the same except for the ones in the first link have a very weird V cut on the earpiece and not a round cut just like the rest..
i would say it's better to get a brand name product that would fit the phone exactly without any shortage in the size... and i think at the end i will just buy IS as i had it on my diamond and it fit good![/QUOTE]
I already got a Full body Armor,same as the last item that you are waiting but in the full version and i am really happy with it actually.
good to know.. i only bought that as a test and if it all goes well, i will get the full body armor .. thanks for the info
Ok... Am I the only one who cant seem to find anything for this phone? No cases (besides the Body Glove which doesnt fit 100% and the gel skin you can buy at the T-mobile store) No cradles, no mounts, nothing pretty much no concern on T-mobile's part to make any nice things for this phone. I know its fairly new but c'mon the Mytouch launched with sky divers and and plenty of skins and cases and even a zipper cloth box. I paid alot and waited alot for this phone now i dont have any options on what to get. All that ebay stuff for the unbranded version from what i hear does not fit the T-mobile version any help or any posting of actual T-mobile touch pro 2 accessories and sites would help. Sorry for the ranting i feel a little better im kinda new at this so please try to keep the flaming to a minimum lol thanks. By the way the phone rocks!!!!
body glove case for tp2
I am one of those that purchased it for $25 at tmobile last Friday and I am the first to say I hate it. While it feels nice, the top part keeps coming off. Also, I noticed the "proximity sensor" (shuts off screen when you put it against your face when you make a phone call) does NOT work with this case. Looks like I'm returning it tmw. I'd love to find cover for tp2. So paranoid of breaking my tp2 with 4 kids.
i hear ya man thanks for chiming in. I was looking to get that case but i too didnt think much of it besides your right about the proximity sensor some people have drilled a small hole to compensate for what body glove didn't do. i did however stumble across this site : http://www.thinktouchpro2.com/tmobile.html
its the only site as far as i know that actually states that they have a dock for the t-mobile version of the touch pro 2 um yay?
Check out Golla bags on Ebay, I'm loving the one I got. Fits the phone perfect with another pocket for cards, and a zip pocket for cash or headphones. $5-7 shipped.
Maybe one of T-Mobile's ways of trying to get everyone to switch to Android.
Have you seen all of the MyTouch accessories @ Walmart.
Yeeeeeeesh!
yes i have its crazy how they are pushing these android devices i actually had a g1 for about 5 months and dont get me wrong i like android but the possibilities on a windows phone as far as programs and tweaking are endless. I need windows and i was so patiently waiting for the touch pro since my birthday is aug 13th and it dropped on the 12th it was my birthday gift to myself.
Is it me or is everything for the tilt 2 expensive and HARD TO FIND or un available. I love silicon cases right, so I wanted to buy one for my new tilt 2, CANNOT FIND ONE ANYWHERE! I found one for a T-Mobile touch pro 2 but it was black, not fitted for my device, ugly and EXPENSIVE! I tried to look for a spare stylus just in case, on Ebay I found ONE for $15!!!!!!! Tried to get a spare battery cover just in case something happened to mine, CANNOT FIND ONE ANYWHERE! Not on ebay, amazon or anywhere. I ended up ordering the european touch pro's battery cover for $20!! Batteries for the tilt 2 are hard to come across and are as much as $50 for one. I have never had so much trouble finding accessories for a phone as popular as this that is used on 4 MAJOR carriers. The pure, which is only supported on At&t has silicon cases in any color for maximum $5. Battery backs for $5-7 and the other accessories are even cheaper. Does anyone have an explanation for this, sorry for my rage I just need to express my anger towards this predicament.
froggylover1345 said:
Is it me or is everything for the tilt 2 expensive and HARD TO FIND or un available. I love silicon cases right, so I wanted to buy one for my new tilt 2, CANNOT FIND ONE ANYWHERE! I found one for a T-Mobile touch pro 2 but it was black, not fitted for my device, ugly and EXPENSIVE! I tried to look for a spare stylus just in case, on Ebay I found ONE for $15!!!!!!! Tried to get a spare battery cover just in case something happened to mine, CANNOT FIND ONE ANYWHERE! Not on ebay, amazon or anywhere. I ended up ordering the european touch pro's battery cover for $20!! Batteries for the tilt 2 are hard to come across and are as much as $50 for one. I have never had so much trouble finding accessories for a phone as popular as this that is used on 4 MAJOR carriers. The pure, which is only supported on At&t has silicon cases in any color for maximum $5. Battery backs for $5-7 and the other accessories are even cheaper. Does anyone have an explanation for this, sorry for my rage I just need to express my anger towards this predicament.
Click to expand...
Click to collapse
The issue stems from the fact that each carrier's version of the TP2 is just slightly different enough that many accessories will only work on one or two of them...so that presents the obvious challenge to manufacturers of trying to guess which models it's worth producing compatible accessories (like cases) for.
Boxwave does carry a line of silicone-like cases for the Tilt2, but I don't know if the styling will suit you.
I feel your pain. I want a rubber case for mine and I had thought I found one on ebay (it was the only one listed). I decided to send the seller a message just to make sure that it would fit a Tilt2. He said no, it was just for the TP2, EVEN THOUGH TILT2 WAS IN THE TITLE!!!!!!!!!!!!!!!
It does seem like everything is for the TP2 and not the Tilt2. But that's okay, I still love the phone.
Do you think the european touch pro 2 battery back will look okay on the tilt 2? I ordered it but haven't gotten it yet, but on the plus side the annoying PTT button wont be their (YAY FOR ME!). I hope it works..... I also hope my dream of silicon cases will come true
Eh, the PTT button is decidedly ungay. use Rhodium Keyboard Config to map it to do awesome **** like rotate screen on single click, disconnect data on double click, toggle wifi on triple, and bluetooth toggle on hold...
Really? Well, if I could find a Tilt 2 battery cover i'd use it. Otherwise not an option for me....
I'm quite sick of the whole situation myself
I totally feel your pain... and Hell, I live in L.A. where you'd think you should be able to find damn near anything on a shelf somewhere, but not a chance. Not even the AT&T stores here carry anything. If you have a Blackberry or an iPhone, then you have more choices than brains, but for anything HTC, good luck. And sorry, I'm not keen on shopping for some things online and accessories for this phone with so many variables is one of them. Someone is missing out on $$$
Okay, I have succeded a huge feat that only people's wild imaginations could think up. I have completed a challange so difficult, gorrillas and llamas will be terrified to death to think of the trouble and harshness I went through to complete this amazing acomplishment. This is no longer a figment of your imagination but a reality! I have found..... A SILICONE CASE FOR THE TOUCH PRO 2! I was searching in the Amazon for the mysterious silicone case when suddenly it popped out of no where! I found green, black, purple, pink, red, blue, and any other color of the rainbow. I was tempted to attack the deal and was just about to finish and proudly show my trophy when.... Amazon doesn't support paypal.... Oh well. Just a little over exaggeration. I did find them on amazon.com but no paypal support so ima have to wait
This site has silicone and rubberized for the tilt 2. http://www.talkietech.com/athtcti2ac.html
Where? The one I found was made for the t-mobile version and is $6.
If you're willing to do a little trimming (PTT button), then most of the Touch Pro 2 plastic, rubberized and silicone cases can be used.
TP2 Silicone case from a hong kong vendor on e-bay:
sorry I can't post link because I'm a new user.
OOh, put it as the title, put a space between every 3 letters or so. I dont have a ppt button anymore, gave it up for a new battery cover.
I am hoping there are some people here who know about what brands/sites are good ones or trustworthy.
Ok, picking up my Evo 3D on Friday..... and surprise surprise, the phone isn't even out yet, yet there are a million different places with brands nobody has ever heard of with supposed cases for this phone, some of them even having dimensions smaller than the phone itself despite being listed as for the 3D.... (Yes I know, no need to tell me many manufacturers will take existing stock and claim it works for the new device just to sell it).
So the thing is, I have no idea what cases might be designed specifically for the HTC Evo 3D, or even any respectable sites to buy such cases from.
But I am also sorta over-complicating the issue by not being sure if I should first over a back cover for the phone or not. See, I am not a fan of the way the camerapod sticks out, I was wondering if there were any GOOD cases that add enough bulk to essentially make the cameras level with the rest of the phone, even if this will add thickness.
Something like this, but I don't know if this really is an official HTC product or not, and if there aren't better ones (or if that is a trustworthy site):
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=28040
And this brings me to my main concern. The main case I want to get is a belt-clip holster, not just a simple little clip that attaches the phone to your belt but basically a whole pouch to hold it, something like this:
http://www.amazon.com/Black-Horizontal-Leather-Magnetic-Closing/dp/B0051IGCAI
But on top of the problem I already mentioned of there being a million cases just simply calling themselves a HTC Evo 3D case... there is also the issue of how it will fit. Normally, I don't care if a case is a little too big for a phone since it will hold it anyway, but all of my previous phones didn't have sensitive parts like the camera sticking out so much before, if I were to get a case, id want one designed to hold the pushed-out camera in place too.... but that would only work if I decide not to get a case that ads bulk for the purpose of keeping the cameras flush with the back of the phone.... and if I do decide to go with a back-cover to add bulk, will those pouch-cases then even still hold the phone or will it then be too thick?
Sigh... I'm over-complicating things aren't I? So anyway, any ideas? Its a shame those back-covers that increase the size of the phone can't make use of that size, such as storing a slightly higher capacity battery or something.
That first one's badass. I wonder how much coverage you get on the front. I ordered two slide together ones (like the innocase surface, but a clone), and one super-silicone one. I like buying a bunch of different colored cases to shake things up every now and then.
ey
retnuh730 said:
That first one's badass. I wonder how much coverage you get on the front. I ordered two slide together ones (like the innocase surface, but a clone), and one super-silicone one. I like buying a bunch of different colored cases to shake things up every now and then.
Click to expand...
Click to collapse
post some links so we can see what they look like plz i still need case
http://www.amazon.com/gp/product/B0053NWDO0
This is the silicone one. Cheap and highly rated for other phones.
http://www.amazon.com/gp/product/B0052TTMXA
This is the snap together (innocase surface-esque) one. Might be sold out now.
where is the case with the kickstand?
I went yesterday to a sprint store and got me a otterbox commuter case. I love it. They had about 4 different kinds but none with a kickstand. They also had the car dock as well.
TPU case for me. Ordered a few weeks ago from ebay, $4 shipped.
picked up a chase from BB this morning belt clip
case 20
screen protector was free
Are there images of any of these cases?
Cyber Akuma said:
Are there images of any of these cases?
Click to expand...
Click to collapse
case i have
http://www.bestbuy.com/site/olspage...d=1218353393109&viewtype=largeFrontView&h=387
but with out the kickstand
Picked up a Body Glove hard case when I picked my 3vo up this morning. Doesnt add too much bulk
Sent from my PG86100 using XDA Premium App
I got the case that Best Buy sells with a kick stand. It's 2-piece, kickstand, soft-touch, protects well. Very streamline. It costs too much ($40.00) but I had some reward points and ended up getting it for free. Love it!
Hmph, just terrific. To complicate matters, that hardshell case I posted isn't even available until July 13 apparently.... and nobody is showing that it looks like from the front...
I guess I should just at the minimum get a belt-clip pouch for now. Does anyone know of any good horizontal ones that were specifically designed for the Evo 3D instead of just general cases that roughly fit a phone of that shape?
Yesterday i got my $11 bookcase cover for my beloved 7.7, it fits the tab nicely and it has a "built in" stand so that you can use the tablet as for example a mediaplayer. Only downside, that I can see now with this type of stand, is that you need to have the tablet wrong way around (connector to the left, instead of right) when you want to use it as a type-stand, but thats not a big deal for me atleast.
The inside of the lid and backside are dressed in thin felt to not scratch the tab.
the plastic seems alittle thinner than on similar cases and that way you have a smaller risk getting the flash to reflect in the plastic when taking pictures.
It was quite cheap compared to the OEM bookcase covers that are out there, as I didnt "buy it now", the delivery was 5 workingdays from Hong Kong to Sweden.
I dont think i have ever gotten something from Hong Kong to Sweden that fast
So how do you like it? Would you reccomend it? How is the stand, does it feel like it will break or something?
I've been looking for something like this and I really like the look of this.. and the OEM ones are soooo expensive, as you say..
Krutet said:
So how do you like it? Would you reccomend it? How is the stand, does it feel like it will break or something?
I've been looking for something like this and I really like the look of this.. and the OEM ones are soooo expensive, as you say..
Click to expand...
Click to collapse
I am happy with it, and the stand seems sturdy enough.
And I would recomend it, remember to check out the rest of the colours also
Nice case, i have orderd one thx för the pic
GT-P6800 via Tapatalk 2
I purchased one of these and thought it was pretty good value. It looks nice on the tab (I had an orange one) and I didn't have any of the fit problems that others reported in the other thread. The stand worked great for my needs and the material it's made out of has a really nice feel to it too.
I did have a couple of minor gripes though.
1) There's nothing to keep the cover closed. Not a big deal if you just want the screen protected while it's in a bag or whatever.
2) The panel forms the bottom most part of the stand was always picking up dirt from whatever I set it down on and then carrying it back on to the screen when I closed it. I started to notice tiny abrasions on my screen protector from it.
I've since switched to a different case but still think this one was pretty good for the money.