[Q] HD2 ring without sound - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Hello,
Sometimes when I receive call in my HD2 it's don't made any sound, the call is ther but no sound is made. I miss some call because of this. Any sugestions?
Thanks in advance.

I imagine you have changed a setting on the phone, just save your info and do a hard reboot to return it to stock

johnerz said:
I imagine you have changed a setting on the phone, just save your info and do a hard reboot to return it to stock
Click to expand...
Click to collapse
I all ready try that, but do not work.

Go to Settings->Sound & Display
-Check your profile settings
-Make sure your ringer volume is turned up.
-Make sure you have a ring tone set.
-Check that your ring type is not set to 'Ring once' or 'Vibrate only'
-Turn off the 'quiet ring on pickup option'
-Turn on 'pocket mode'
See if problem persists.
Also, how often does this happen ("sometimes" is a bit vauge) and does it happen only when certain people call you?

Faelok said:
Go to Settings->Sound & Display
-Check your profile settings
-Make sure your ringer volume is turned up.
-Make sure you have a ring tone set.
-Check that your ring type is not set to 'Ring once' or 'Vibrate only'
-Turn off the 'quiet ring on pickup option'
-Turn on 'pocket mode'
See if problem persists.
Also, how often does this happen ("sometimes" is a bit vauge) and does it happen only when certain people call you?
Click to expand...
Click to collapse
Thanks for the tips, but the problem persists.
It happens 2 times in 3 calls.
I think that i have to send the phone to HTC assistence.

Is it the same numbers you are having the problem with?
If so its a setting without doubt.
Try deleting the full phonebook entry for those numbers (write them down if you wish) soft reboot (press the red or yellow rest button under the battery cover) then have them call you again

I had the same issue. The issue was the ROM I was using. Sometimes it did, and sometimes it didn't play my custom ringtone.

xmoo said:
I had the same issue. The issue was the ROM I was using. Sometimes it did, and sometimes it didn't play my custom ringtone.
Click to expand...
Click to collapse
When you change the ROM the problem disapear?

ricardojm said:
Hello,
Sometimes when I receive call in my HD2 it's don't made any sound, the call is ther but no sound is made. I miss some call because of this. Any sugestions?
Thanks in advance.
Click to expand...
Click to collapse
The same thing happened to me too a few times. Still dono where the problem is...

Mine did the same, and afte a hard reset, it did not recover. Send to HTC and found out that the speaker is broken. They replaced it under warranty. All is fine again after that

Related

[Q] Aria / Android Ringer Volume broken

I have a rooted, Liberted HTC Aria. I can set the volume all the way down to vibrate via the rocker, place it on the table, call it from another phone, and the phone will ring.
When I re-check the volume level it is set to the quietest ring, not vibrate.
I have repeated this over and over as I though I was just accidentally hitting the rocker while it was holstered, but that's not the case.
I've tried downloading volume lock. I set the phone to vibrate and test volume lock to see if it works.
It does, I get a message to confirm new volume level, if i don't it stays on vibrate, as indicated by the vibrate icon.
Then you call the phone... The phone rings and the volume is now set to the quietest ring, not vibrate.
Any ideas, this is a huge inconvenience at work?
Thanks.
Don't know how old this thread is, but I will tell you, you are not going crazy.
I have a vibrant that is rooted and custom rom loaded.
I've had the custom rom for 3-4 months now.
I reloaded some crappy rom, and after I did that, no matter what rom i put on it, I get this ringer problem.
So, no, it's really a problem, you're not imaging it.
So far I can only think that the default build.prop has been funked with.
Or, one of the programs that you installed is messing with it.
I think that it more likely is #1 because on fresh install the phone is fine. But upon reloading all my apps (apps only, no data/ system data), the damn phone will funk up and do the ring crap again.
So, try Odin - to stock and from there, flash a brand new rom and restore one by one.
Sorry mate, that's what I've found, it sucks. I hope you found a solution for this. Like I said, I have a Vibrant, so I don't browse the "Aria" forum at all. I found this thread on GOOGLE.
If you find out anything, PLZ PLZ PLZ, - contact me.
aljl1011 at g- mail DOT . com
thank you
jrckt320 said:
I have a rooted, Liberted HTC Aria. I can set the volume all the way down to vibrate via the rocker, place it on the table, call it from another phone, and the phone will ring.
When I re-check the volume level it is set to the quietest ring, not vibrate.
I have repeated this over and over as I though I was just accidentally hitting the rocker while it was holstered, but that's not the case.
I've tried downloading volume lock. I set the phone to vibrate and test volume lock to see if it works.
It does, I get a message to confirm new volume level, if i don't it stays on vibrate, as indicated by the vibrate icon.
Then you call the phone... The phone rings and the volume is now set to the quietest ring, not vibrate.
Any ideas, this is a huge inconvenience at work?
Thanks.
Click to expand...
Click to collapse

[Q] S3 keypad tones

Would anyone know if it is possible to turn off the 'drip' tone when dialling a number and have normal phone dial tones.
Menu --> Settings --> sound --> Keysound on (under System).
Well for me that just allows you to turn the "Drip" on and off.
I don't want a drip, I want a more normal phone tone, as used in tone dialling
shawnfr said:
Well for me that just allows you to turn the "Drip" on and off.
I don't want a drip, I want a more normal phone tone, as used in tone dialling
Click to expand...
Click to collapse
did you mean to change the default keypad sound (drip)?
i believe you must replace system sound and of course it need to be rooted..
I would like it to sound like piano keys. Much better than a drip sound.
Sent from my GT-I9300

galaxy s3 auto vibrate itself

hi ..
every other hour or tow my phone set itself to vibration mode !
and i always miss important calls because of vibration mode !
it's very annoying !!
please help !
I have the same problem. Is it a phone setting somewhere? If so, I just cannot find it.
drogoal said:
hi ..
every other hour or tow my phone set itself to vibration mode !
and i always miss important calls because of vibration mode !
it's very annoying !!
please help !
Click to expand...
Click to collapse
Probably you have a case or somehow are pressing the volume all the way down.
Remember either lowering the volume or power button plus silent mode are the quick shortcuts to enable Vibration mode.
Also when a call is received and the phone is upside down can make the ringing on mute.
Sent from my GT-I9300 using Tapatalk 2
In my case Timeriffic was automatically reinstalled from Google Play. the default setting was to set the phone to vibrate at 8PM Mon - Thu. All sorted now.
fawaad said:
Probably you have a case or somehow are pressing the volume all the way down.
Remember either lowering the volume or power button plus silent mode are the quick shortcuts to enable Vibration mode.
Also when a call is received and the phone is upside down can make the ringing on mute.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
i had the same problem, you can activate or deactivate this option under settings/sound/automatic feedback
Hmm,
Can't seem to find that seting on my phone, so will have to hope that it was because of Timeriffic.
valerio.tosti said:
i had the same problem, you can activate or deactivate this option under settings/sound/automatic feedback
Click to expand...
Click to collapse
I know this is an old thread, but all of a sudden my phone seems to randomly switch sound on throughout the day, after i put it on vibrate. I wonder if there's a way to enable vibrate only via the notification bar, rather than the volume keys.
In my opinion the volume keys should only control the current volume, rather than the sound "profile" (mute, sound, vibrate).
Anyway i will be doing some looking into why this seems to happen.
1) you have a case which is pressing the Volume button down
2) Try turning off AUTO HAPTIC FEEDBACK
3) try resetting your phone if all else fails
Sent from my GT-I9300 using Tapatalk 2
i have same weird vibrating problems also. I normally set my phone to sound mode no vibrate. whenever someone text me it automatically change the mode to sound+vibrate I've been trying anything but to no avail this still persists.
and BTW I'm using GO SMS.
Even i have been facing this problem with various ROMs..what could be the issue? any help?
S3 auto turns to Vibrate mode
Hi,
For last 2 weeks, i am facing a same problem. randomly few times in a day, message default ring tone rang without any message and after a while (may be after few seconds) it turns to Vibrate.
the only thing new happened to my phone is, its board died all of a sudden (bgr[dot]com/2012/12/21/samsung-galaxy-s-iii-hardware-failure-262887/) and the Samsung service center has replaced it with new board. since then i am facing this problem.
I was using the Nova launcher before the repair, and now after the repair using the same Nova launcher.
Any idea? anyone else facing the same issue? btw, i have turned off the haptic feedback as well, restart the phone also, but issue still persists.
any feedback would be highly appreciated, thanks.
R: Auto Vibrate itself
To
junaidnavas
bordikun
khurramjamshed
Guys, I am facing similar problem and nothing else is working. I think we should compare notes to find out what is the cause of this problem. Tell me what ROM are you running? Custom or Stock. If custom then which one? What 3rd Party apps are you running that can schedule tasks e.g Tasker, Scheduler etc. Have you turned off Haptic feedback and motion under your phone settings?
My Answers:
Custom ROM Yes
Ripper ROM (Love it and big fan)
Haptic Feedback Off
Motion Feature Disabled
3rd Party Apps Yes
Tasker Yes
Scheduler No
Call recording Yes
I have sam problem with NOTE 2.
Every last incoming call set my "default" sound profil .Depend what I have set ( sound, vibration, mute....) at the incoming call moment.
I found out that AVG antivirus is a problem???? I delete AVG and for now ( two days ) all is OK.
Maybe its the auto mute
There is a feature under motion that puts the phone in vibrate/silent when you "turn it down", maybe that is what is causing you problems? My phone was muting itself with no logical reason and deactivating it did the trick, hope it works for you

[Q] Problem with vibration. It only vibrates for calls and doesn't for anything else

Hi all,
I have a problem with the vibration of the device.
It vibrates when I receive calls (I put the heartbeat vibration), but it doesn't for anything else.
I've tried to use any possible mode (silent, vibration, loud), and tried disabling and enabling the vibration from the "Sound" menu and from individual applications, but found no fix for this so far.
Same thing happened one month ago but I don't remember in which way I made it work by playing with the settings.
Anyone ever faced this problem before?
Any idea about the resolution?
Thanks a lot.
ale
have you tried under sound settings to enable auto haptic(the last one) and tick with V whatever app that doesn't vibrate?
and offcourse, try to reinstall the SMS app and define the incoming settings that'l support vibrate.
eytan123 said:
have you tried under sound settings to enable auto haptic(the last one) and tick with V whatever app that doesn't vibrate?
and offcourse, try to reinstall the SMS app and define the incoming settings that'l support vibrate.
Click to expand...
Click to collapse
Thanks for your reply.
I guess I fixed it again, but I don't know in which way.
Among the things I have done there are:
- put the volume at the max and untick and tick again the "Sound and Vibration" in "Sound" menu (which I suppose gave the fix)
- Activated the Haptic feedback
- Activated the Auto Haptic feedback for some applications
- changed the "Device Vibration" in "Sound" menu
- increased to the max the vibration intensity for every voice in "Sound" menu
The menu names/voices may be different since I'm using the italian language on my phone.
I just wanted to share with you all in case someone face the same problem again.
Thanks a lot again
ciao
ale

In call volume problem

Recently I've noticed a problem that I most certainly didn't have before. The problem is that the in call volume keeps going down to around 50% with every new call. When I receive or make a call, the in call volume is around 50%, which is not enough for me. So I make it louder to 100% and can talk just fine. Unfortunately, with a new call the volume goes down again to the same default volume around 50%, which means I have to turn the volume up every time I receive or make a call. This is really annoying. I'm absolutely positive that I did not have the problem before. What might cause the problem and what can be done about it?
P.S. Settings >>> Sound >>> Volume - all the sliders are on the right.
EasyWorld said:
Recently I've noticed a problem that I most certainly didn't have before. The problem is that the in call volume keeps going down to around 50% with every new call. When I receive or make a call, the in call volume is around 50%, which is not enough for me. So I make it louder to 100% and can talk just fine. Unfortunately, with a new call the volume goes down again to the same default volume around 50%, which means I have to turn the volume up every time I receive or make a call. This is really annoying. I'm absolutely positive that I did not have the problem before. What might cause the problem and what can be done about it?
P.S. Settings >>> Sound >>> Volume - all the sliders are on the right.
Click to expand...
Click to collapse
Go to Phone -> Call settings -> My Call sound.
You can try this. Or use the extra volume button when calling someone.
QoY said:
Go to Phone -> Call settings -> My Call sound.
You can try this. Or use the extra volume button when calling someone.
Click to expand...
Click to collapse
I have tried that (both checking and unchecking the option) - the problem remains. The extra volume button is not an option since tapping it every time is even more annoying than increasing the volume with the Volume Up button.
EasyWorld said:
Recently I've noticed a problem that I most certainly didn't have before. The problem is that the in call volume keeps going down to around 50% with every new call. When I receive or make a call, the in call volume is around 50%, which is not enough for me. So I make it louder to 100% and can talk just fine. Unfortunately, with a new call the volume goes down again to the same default volume around 50%, which means I have to turn the volume up every time I receive or make a call. This is really annoying. I'm absolutely positive that I did not have the problem before. What might cause the problem and what can be done about it?
P.S. Settings >>> Sound >>> Volume - all the sliders are on the right.
Click to expand...
Click to collapse
Why dont you try a factory reset.....
art_arev said:
Why dont you try a factory reset.....
Click to expand...
Click to collapse
As a last resort, I finally did. It worked. Luckily, I had a two week old nandroid backup, so, hating to restore all the apps and settings manually, I just fell back to that backup. It appears that I did not have the problem in question two weeks ago, so after restoring from the backup I got back all my apps and settings with no in call volume issue. But it is still unclear what caused the problem and how to fix it if it pops up again.
you have to set the volume to 100 in audio settings, doing so will save the settings. also you can get some extra volume by going into dialer call settings and tick "use extra vol for calls"
bala_gamer said:
you have to set the volume to 100 in audio settings, doing so will save the settings. also you can get some extra volume by going into dialer call settings and tick "use extra vol for calls"
Click to expand...
Click to collapse
But "extra volume" icon is not activated for next call and have to re-tap it to enable again. That's bad.

Categories

Resources