I am on stock 16GB sd card class2 and HD2 stock battteryI tried 2GB class 2 and 8Gb class 6. I am on Radio 2.10 and even upgraded to 2.12.Lot of SODS and phone restarts automatically.
After SOD windows won't load up and hangs at Stick together logo and will never go forward. Need to take off the battery and need to wait for couple of minutes and after wards it loads.
After getting into Android, gets again SOD and will reboot and when I get back into android, will try to check email or make call and then again phone restarts itself.
Any ideas.
I am on Darkstone latest release froyo2.2 with today's update i.e 18th August and tried all kinds of ROMS.
Any help is appreciated.
do you hspl3 your hd2
Yes it says 2.08SPL when I enter in tri-color mode.
Any help on this?
this has happened to me as well, using mattc 1.5b with Cloudy 1.6 winmo ROM
Radio 2.10.50.26. I am unable to provide the cause of this, just seems to be
random.
Could be corrupt files on you sd card. A bit time consuming, but doesn't hurt..
- Copy your sd card onto your pc.
- Format sd card (fat32)
- Copy everything back
I read somewhere that this problem can be caused with mounting your sd card from your phone via usb. I know I had a lot of problems with Android seeing the new files I copied over so I stopped doing it (connecting via usb).
polstein said:
Could be corrupt files on you sd card. A bit time consuming, but doesn't hurt..
- Copy your sd card onto your pc.
- Format sd card (fat32)
- Copy everything back
I read somewhere that this problem can be caused with mounting your sd card from your phone via usb. I know I had a lot of problems with Android seeing the new files I copied over so I stopped doing it (connecting via usb).
Click to expand...
Click to collapse
Friend,
I did copying N number of times, formatting SD card..
Do you want to me to try still?
Any other suggestions?
Just dittoing. Having the same problem with chuckyrom + mattc 1.5. Seems to happen when i'm not using the phone for a while.
Can I load the stock firmware , and install HSP3 and start running android?
Do I need to have a different ROM to run this? All I understood was earlier there was a sound issue but not now..Can I do the above step?
same
yea i get this very random, I'm not to sure if its bluetooth related for me, anyone's guess i think at the moment
kingfisher1111 said:
Friend,
I did copying N number of times, formatting SD card..
Do you want to me to try still?
Any other suggestions?
Click to expand...
Click to collapse
I had this same self-reboot issues, regardless of android build, even after deleting and re-creating the android folder in the sd card.
Following is how I managed to solve it:
Take out sd card and use card reader, mount it on a winxp machine.
Copy ALL files to a backup folder in pc. Use 'xcopy /e /c *.* c:\sdbak\.' for example, as normal copy/paste wouldn't work if it found errors due to corrupted files.
Use sd formatter. Refer to this thread. Do a Full format; a class 2, 8GB will take around 10 minutes to complete.
Copy back each backup folder into the formatted sd card, one by one. Recreate and copy your favorite android build onto the sd card.
Reinsert sd card, boot up and start android from fresh.
Let us know if this works for you.
i did do full format in xp before and have random reboot problems. Maybe something happened since then, ill try this tool.
Did it and no dice, still reboots. Im gonna try another suggestion about uninstalling setcpu.
setcpu
this restart happens to me everytime i use setcpu im on shubcraft 1.4b with the r4 overclocked zimage labeled NewKernels_LatestGIT_r4_BTalternative it just started happening with this zimage. are you using setcpu try uninstalling it it worked for me! i never had this prob with the original zimage! hope this helps!
b3ltazar said:
this restart happens to me everytime i use setcpu im on shubcraft 1.4b with the r4 overclocked zimage labeled NewKernels_LatestGIT_r4_BTalternative it just started happening with this zimage. are you using setcpu try uninstalling it it worked for me! i never had this prob with the original zimage! hope this helps!
Click to expand...
Click to collapse
I havent changed the zimage, but i am using shubcraft and setcpu, ill uninstall and see if it makes a difference. Thanks.
ferdaus said:
I had this same self-reboot issues, regardless of android build, even after deleting and re-creating the android folder in the sd card.
Following is how I managed to solve it:
Take out sd card and use card reader, mount it on a winxp machine.
Copy ALL files to a backup folder in pc. Use 'xcopy /e /c *.* c:\sdbak\.' for example, as normal copy/paste wouldn't work if it found errors due to corrupted files.
Use sd formatter. Refer to this thread. Do a Full format; a class 2, 8GB will take around 10 minutes to complete.
Copy back each backup folder into the formatted sd card, one by one. Recreate and copy your favorite android build onto the sd card.
Reinsert sd card, boot up and start android from fresh.
Let us know if this works for you.
Click to expand...
Click to collapse
It doesn't work. It still reboots inspite of doing all the above steps.
I have the same issue with crashing back to windows mobile when inactive, this is only recent for me, previously Android was solid as a rock. Guess I will try a build without adding apps or settings and see if it crashes, then add apps one at a time.
Does anyone know of a way of catching the error/crash reason?
b1ackhawk said:
I havent changed the zimage, but i am using shubcraft and setcpu, ill uninstall and see if it makes a difference. Thanks.
Click to expand...
Click to collapse
Just a note, shub and darkstone's builds gave me random reboots. Ive moved to mattc's nexus based build and it has been super solid.
I have installed mattc 1.7 and zimage r11 with all .ko files and no longer experience reboots in android, I use task manager and setcpu also, its worth trying a this if you have probs
Sent From My HD2 using xda Android app
Related
I just purchased a new 16gb SD card and have been using an old 8gb that I had from a previous phone since my original 16gb broke in half. At the time of it breaking I was on cm7 7/13 build and otb .13 kernal for cm7. I copied all the files that I had backed up from the old SD and pasted them onto the new 8gb while adding the latest cm7 build and glitch kernals. I just booted into recovery to try and flash these items and it is telling me that there is an error mounting the SD card and under mounts it will not work when I try to mount either. I don't know why this is because all the files on the card are viewable from the regular phone interface and it says that the card is mounted. I just can't enter the "choose zip from SD card" menu in cwm. any idea as to why this is or how I can remedy it?
thanks in advance.
Sent from my SCH-I500 using XDA Premium App
same problem with "cannot mound SD card" in CWM, though I used this same SD card to update to the CM7 7/13 release, but now cannot update to the newest one.. please help!
NEVER worked with COMROM before....HOWEVER
Just like a computer (in a way) your phone saves certain things like how to operate or run on this phone.
Here's my suggestion
Put your mem card in (make sure everything is backed up still) and start the phone NORMAL not in CWM, as you said it reads it just fine so go into:
Settings> Storage
Here hit "Erase SD Card" if it's unavailable just unmount, then proceed
Once you have completed this, put ONLY the .zip files you need back onto the card, via computer...or high speed usb cable, whatever you want but just add the files you absolutly want to do.
Go into CWM and try again....
If it works then go back and only bring onto your card files/pics/vids you ABSOLUTLY want and leave the extra stuff off (meaning maybe one single file on the card is giving the phone a bad taste so the phone is rejecting it.)
Let me know how it goes!
Best of Luck!
Used SD Formatter on my PC, put back the files I backed up onto the SD card, and was able to flash newest CM7! Thanks!
thanks for the info... but sadly my dinc. 2 is set to be delivered tomorrow as I am having the missed call issue quite frequently. I am really going to miss the great dev team and support group that has grown for the fascinate, but it's a shame that this issue is forcing many to jump ship from an otherwise excellent device. thanks again.
Sent from my SCH-I500 using XDA App
I have recently upgrade to android 2.3.3 and am using EWJET as a rom.
I cannot access the SD once Android OS has booted. All apps and the system/settings says SD Card isn't mounted. Tried multiple installs, nothing works.
All 2.1/2.2 Roms are fine.
If i tap back during start-up and access xrecovery I have normal access to the SDcard and can flash packages etc. So the phone is able to access the card ok.
My SD card is the 8gb that came with the phone and isnt partitioned in anyway.
However in the past I did have it partitioned, but not now. Incase I am installing 2.3.3 and the rom wrong, ill tell you my steps.
Factory Firmware 2.1 flashed
rooted, busybox and recovery installed
Flashed X10i_3.0.1.G.0.75_only_kernel_baseband
then install the EWJET rom as per his instructions..
I pray I am only doing the above steps wrong as I desperately want the SD working on 2.3.3.
Any help would be appreciated.
Brent
having something similar:
http://forum.xda-developers.com/showthread.php?t=1201915
brent0r said:
I have recently upgrade to android 2.3.3 and am using EWJET as a rom.
I cannot access the SD once Android OS has booted. All apps and the system/settings says SD Card isn't mounted. Tried multiple installs, nothing works.
All 2.1/2.2 Roms are fine.
If i tap back during start-up and access xrecovery I have normal access to the SDcard and can flash packages etc. So the phone is able to access the card ok.
My SD card is the 8gb that came with the phone and isnt partitioned in anyway.
However in the past I did have it partitioned, but not now. Incase I am installing 2.3.3 and the rom wrong, ill tell you my steps.
Factory Firmware 2.1 flashed
rooted, busybox and recovery installed
Flashed X10i_3.0.1.G.0.75_only_kernel_baseband
then install the EWJET rom as per his instructions..
I pray I am only doing the above steps wrong as I desperately want the SD working on 2.3.3.
Any help would be appreciated.
Brent
Click to expand...
Click to collapse
you try pulling it out and blowing on it like an old nes game...
jk smiles but have you tried perhaps throwing the sd into a computer and just formatting with different cluster sizes or in general formatting the card. Might need to use an adapter.
Happen the same thing to me but with wolfbreaks rom... some people told me to re-flash the rom but it didnt work. The funny thing is the the sd card will work on any other device, and any other sd card will work on the phone... havent try re-formatting the card cauze i dont have the adapter but it should work
Sent from my X10i using XDA App
J!K said:
Happen the same thing to me but with wolfbreaks rom... some people told me to re-flash the rom but it didnt work. The funny thing is the the sd card will work on any other device, and any other sd card will work on the phone... havent try re-formatting the card cauze i dont have the adapter but it should work
Sent from my X10i using XDA App
Click to expand...
Click to collapse
you might want to get an adapter. A while back i tried setting up a sd-ext partition on a 4gig card and long story short the only way i was able to run a format that gave me back the 4gigs was throwing it into an adapter
Had the same thing when I updated with stock-2.3.3.... At the time I had it partitioned in 2 partitions...
I connected the phone then with my pc, and there it was, alive and well.... So I backed up the entire card, that is, the first partition, where all my data were; I powered off the phone, took it out, found a adapter, deleted the 2nd partition with Partition Wizard Home Edition Minitool, made the sd-card 1 partition only, formatted that partition, and then I copied all my backed-up data back to the card
Then I put the card back in the phone, booted and voila: the card was recognized again by 2.3.3....! and now it functions ok!
Hope this helps, greetz, good luck,
kwarkje
J!K said:
Happen the same thing to me but with wolfbreaks rom... some people told me to re-flash the rom but it didnt work. The funny thing is the the sd card will work on any other device, and any other sd card will work on the phone... havent try re-formatting the card cauze i dont have the adapter but it should work
Sent from my X10i using XDA App
Click to expand...
Click to collapse
formatting did not help
Anything new on this?
for me it is a little different. The card that came with the phone works fine with the GB update, the thing is that I got another phone, this one came with a 4 Gb card so I took the one in the x10 with all my pics and put it in my new phone and put the other new card in the x10 but it doesn't recognize it...
I've tried with 2 different cards, in xRec i can read it, back up, etc, but once in android its like there's nothing there. Tried formatting it with no results....
What could it be that it reads the original x10 card and no other?
Ive got no idea, but its annoying. Im gonna have to go back to 2.1 which sucks.
We need to some how figure out whats causing this. Ive tried everything.
2.3 seems to be the problem.
brent0r said:
Ive got no idea, but its annoying. Im gonna have to go back to 2.1 which sucks.
We need to some how figure out whats causing this. Ive tried everything.
2.3 seems to be the problem.
Click to expand...
Click to collapse
I have 2.3 and the card that originally came with the phone (16Gb SDHT) works fine, the thing is that it doesn't read any other card.
brent0r said:
Ive got no idea, but its annoying. Im gonna have to go back to 2.1 which sucks.
We need to some how figure out whats causing this. Ive tried everything.
2.3 seems to be the problem.
Click to expand...
Click to collapse
Same issue no clue what to do
Today i found a workarround using DISKPART (6 years later hehe)
Note that this will wipe your storage card so BACKUP !!
Hold [Win + R] and type in : diskpart (or launch cmd as admin and types: diskpart )
Every lines should be followed by enter key.
list disk
select disk *
(" * " is the number of your drive. be carefull do not choice your hard drive number which is commonly 0)
clean
create partition primary
assign
format fs fat quick
exit
Tested and work fine on windows 8 (but should work on 7, 8.1, 10)
Thanks Hope i help even 6 years later !! cheers
Hi I recently flashed my Samsung Galaxy S2 GT-I9100 with the Resurrection Remix ICS v.1.9.1 ROM and everything went fairly well except that my external sdcard looked like it had been totally erased. While this was irritating it was not devastating (had a backup) but when i attached my sgs2 to my computer to copy the backup back to the sdcard i noticed that everything was there, i hadn't lost a single file. I went back and looked at the card via my phone and it still looks empty but i did notice (after further inspection) that it is almost full. I checked to make sure view hidden files was enabled, it was, but still nada (using OI File manager and File Explorer). I got no ideas would really appreciate any ideas on what i might do to fix this issue.
Cheers,
-Gaiko
[Q] I updated from ICS resurrection remix 1.7 to 1.8.1 and i got problems with..
Hi, thanks for the quick reply but i had tried those things (I shoulda mentioned that, sorry). I have tried combinations of use internal storage and MTP but still not able to see the contents of the exsd card (haven't had problems seeing the card itself, just the contents on the card).
Cheers,
-Gaiko
copy the contents of the sdcard to your computer, and format the sd card from your phone. Try again.
scandiun said:
copy the contents of the sdcard to your computer, and format the sd card from your phone. Try again.
Click to expand...
Click to collapse
hi I tried to format it then copy a few things back on it but strangely it still shows up like it did before, that is, before there was one lone/empty folder that showed up (nothing else showed up through android, but i could see it via windows) but after i formated it, this folder (named "AudioBooks" that i had made before) still shows up when i try to look at the cards contents via android. This folder does not show up in windows, and nothing new that i copy to the card shows up in Android still.
Is there perhaps some sort of cache that i should clear as it seems to be showing me "bits from the past" (though also strange how it only shows me that audiobooks folder and not any of the 5 other folders that i had on there previously).
Any thoughts/ideas would really be appreciated!
-Gaiko
Maka a backup and restore original rom, and see if the problem persists. If not, you should notify a bug to Resurrection Remix rom developer.
Similar problem
I have had a similar problem. Been using RR last few months and all been good. Since I updated to RR 2.2 could not access my internal SD card. I had a few backups and as soon as I restored 2.1 viola everything's fine.
Tried using Siyah 3.2.7.2 and 3.3.1 kernels with no luck.
Have tried wiping everything and doing a fresh install with 2.2 but same issue. Did you have any luck?
Awesome newb video by the way! Made me laugh...
Just rooted and I like it, I don't wanna go back, but I can't get the microsd to pick up...I'll give all the info I can--def newb to root/droid but my background is IT, so hopefully we can figure out how to fix it so I can keep the root and not go back to stock(if that would even repair the problem)
Got a pny 32G microSD, droid incredible 4g lte(Verizon) that I rooted using the unlock script and fakeCID and then loaded Vipers Venom LTE custom rom...somewhere in this process-I think right after unlocking-it quit accessing the sd card...I've looked around and read some things about this 'USB brick' thing, but I don't know if it's applicable to me...here's what it does now:
SD card is in phone, but under 'Storage' Total Space and Available show unavailable, and everything else is greyed. If I try and pull the card the phone gives me the 'sd card unexpectedly removed' error.
Windows XP has no issue reading/writing to this card with a card reader. I've formatted a few times fat32 with xp(which i hate doing)and put it back in the phone, with the phone off, booted, and nothing happens. Oddly, when it first happened, after installing the custom ROM, when I'd do this procedure the phone would see the card on boot, but stay forever on 'preparing sd card/checking for errors' and never complete.
Back on the phone side of things, booting into the 'recovery mode', where you flash and whatever, it can see the card, see it's contents, and I wrote some sort of log to the card(option in the menu), so it can access it...oddly, I could not load my Viper rom from the microsd card, it failed on the file, but put it under some folder on the phone and that's how i ended up flashing the ROM, which I was nervous about doing as everything I saw said put the rom on the external sd card...
If I plug the phone into the XP pc via usb cable, choose use as disk drive, no problem accessing phone data, but 'please insert disk' on the card. Cannot push data when in usb debug mode via adb commands either. Oddly, dunno if this is related, it gives me 2 drives and also a CD ROM drive--tried dialing that##7 number for the option to disable cd rom, but it was already disabled. Dunno if this is related, but throwing it in there.
Tried chkdsk on the sd card with Xp, no errors, no problems. Hell, the card's not two weeks old and I've only had the phone a little over a month. I've done a bit of research the past couple of days and the only thing I haven't tried is the very confusing procedure i've seen for some of these 'usb brick' problems, but is that my problem. I'm hoping if all else fails i can go back to stock, just downloaded the stock rom, but will that even fix it? Gots to have my trailer park boys on my sd card to watch! Thanks for the help guys and gals! Sorry for the long post, but I like to give info--if kernel version or any other data like that is required, I can post it.
zazaray said:
Got a pny 32G microSD, droid incredible 4g lte(Verizon) [...] it quit accessing the sd card...
SD card is in phone, but under 'Storage' Total Space and Available show unavailable, and everything else is greyed. If I try and pull the card the phone gives me the 'sd card unexpectedly removed' error.
Windows XP has no issue reading/writing to this card [...] formatted a few times fat32 [...] and nothing happens. Oddly, when it first happened, after installing the custom ROM, when I'd do this procedure the phone would see the card on boot, but stay forever on 'preparing sd card/checking for errors' and never complete.
[...] booting into the 'recovery mode', where you flash and whatever, it can see the card, see it's contents [...]
Click to expand...
Click to collapse
i tried to slim down your quote, but from my experience i'd still say the sd-card is somehow busted! i had a similar prob with the SD card in my Dinc4G two weeks ago. i _was_ r/w quite fine even from custom rom and at one point, the card just quit. removing and reinserting just ended in "preparing sd-card" and directly after that "safe for removal" ... wasn't able to access it any more within Viper, recovery (TWRP for me) was still seeing the card fine just like on your end.
putting the SD-card into a Win-laptop it _appeared_ fine and came error-free with scandisk etc ... BUT when i tried to backup all data from it before formatting (had like 10G on my 16G card) there were a couple of files that failed to read and i could NOT recover at all anymore. I formatted the SD-card again after that (full format, not fast/quick!) ... and put most of the files back. it is working again now in my Dinc4G but the card sure has some defect sectors (and usually _tends to die soon_ after such errors appear first!
i'd heavily recommend that you try to source some other micro-sd card first and try if you custom rom can read from it again. if that works fine and you see your SD-card from within the settings menu in the rom. you can be pretty sure that it's really the card.
PS: even brand new mem cards tend to fail at times :cyclops: ... just try to erase all private data on it (means: _fully overwrite_ with other stuff until the card is completelly filled) ... and then try to get a replacement from where you got your (fairly new) SD card from.
hope that helps a bit
i agree with the above post... try a different card. if formatting it doesn't fix it, it's time to try a new card.
j13smiley said:
i agree with the above post... try a different card. if formatting it doesn't fix it, it's time to try a new card.
Click to expand...
Click to collapse
Thank you for the help, I resolved this issue, as it is the card, but now I have a different issue, unfortunately...
I've been having some strange things happening with my micro sd card lately. After flashing a CM9 glitch rom, I noticed that when I plug my phone into my pc with a usb cord, it shows two drives instead of just one. This has never happened to me before. I have also been having problems copying files from my pc to my phone and when I disconnect the cable the files are gone from the phone. I copied 2,000+ pics from my work pc to my phone and verified they copied correctly. When I got home all of the pics were gone as well as some ROMS I had just downloaded. I formatted my card with windows xp and then I did a 1 pass secure erase with CCleaner. When that was done, I erased the card from the phone itself. After the card was erased, my Titanium Backup folder was still there with all of my backups. Anyone else experienced these issues?
My card is a Samsung 16GB Class 4 HC and is a few years old
I know regular eraser programs like ccleaner, etc don't work properly on sd cards, (they only kind of move files around so they are not seen) look up sdformatter v4 and use that.
What ROM are you on right now
hhp_211 said:
I know regular eraser programs like ccleaner, etc don't work properly on sd cards, (they only kind of move files around so they are not seen) look up sdformatter v4 and use that.
What ROM are you on right now
Click to expand...
Click to collapse
Right now I am using unofficial CM9 with glitch kernel
One other thing i can think of would be that the scanner would take a really long to re scan all those pics (like maybe 20 minutes or more from what I've read)
hhp_211 said:
One other thing i can think of would be that the scanner would take a really long to re scan all those pics (like maybe 20 minutes or more from what I've read)
Click to expand...
Click to collapse
I tried taking a picture a minute ago and it said please insert an sd card to take a photo. The sd card was still in the phone. The only other thing I can think of is that maybe the phone isn't unmounting the card from the pc aproperly. I had my sd card open on the pc and could see all of my files and when I hit turn off usb storage I didn't see any other messages in the status bar and the files were not there
@Sippi4x4man
I know it sucks but you might need to try saving everything off the sd card again, formatting with sdformatter from your pc,, while still blank install, reboot, wait for ROM to settle in, take picture. Then if all goes well, connect up to the pc (i assume you use mass storage) then put files back on, disconnect from pc,,, reboot and wait the 20+ minutes for 2000+ pics to be scanned by the media scanner process. Hopefully that works
It is formatting now. We will see how it goes. Thanks!
Update: I ran sdformatter and did the overwrite and then format. When I turned usb storage off the ROM said my sd card was damaged. I used odin to go back to stock 2.3.6 and when I was done it was still saying sdcard damaged. I formatted the card from the phone itself and then flashed AOKP Milestone 5 Glitch and all seems to be working just fine. Thank you for your help.