I have a few personal tasks that i need to do at a specific time of the day and at time i am too busy and forget about it
I am looking for an app that will pop up reminder (and play sound) at a set time. Also need to be able to do repeat event so i dont have to program it everyday. So it sort of like the calender that come with android but since the calender on the galaxy does not allow me to customize the reminder ring tone. I cant hear a "beep" when i am in a busy environment.
Thanks for any suggestions.
I just use the alarm on the clock app
you can use the alarm clock on the phone
you can set the exact time.the ringtone it plays.
and you can set the days you want it to ring
Oh DUH!!! i'm thinking too hard. Thanks for your helps. It did exactly what i wanted.
Related
I would like my calendar reminders to be tied to my alarm rather than notifications. The problem with it being tied to notifications is that I don't want texts/emails waking me up at night, but I want an 8AM meeting (which I had this morning and overslept for ) to generate an alarm for, say, 6.30. On my nokia n95 that I had before this, I could set reminders for an arbitrary time before a meeting and it would generate an alarm with an alarm tone, not a notification style *beep* tone that does not repeat. So, what I want is actually pretty simple -
1) Decouple calendar alerts from notification volume
2) Be able to set an alarm reminder at some arbitrary time before a meeting
I've done a bit of research and there doesn't seem to be a satisfactory solution to something that seems like a basic problem to me. So, if anyone here has ideas, please let me know.
Tasker maybe?
Sent from my GT-I9100 using XDA App
I'm just wondering if there is a way to set a default volume and sound for the stock alarm clock, so when I set a new one those are already done? I'd be happy using it rather than ones from the market if I could do that. Had no probs setting alarms in s voice either, but it's pointless if I then have to change those two things.
I am rooted if that helps with a method?
Ok, it's me, Doofus again. Found a sering in build.prop. Will back it up and then try changing it. With regards to volume I've edited my alarm tune (Dream On, appropriate eh) with audacity sering up a huge fade in so that dude should now be fine. I'll post if the build.prop thing works.
Sent from my GT-I9300 using Tapatalk 2
So so far editing the build.prop isn't working. I've also transferred a copy of the music file into the system file where the default used file for alarms is, but still not working. I've rebooted between each change.
Wondering if anyone had any other ideas?
Sent from my GT-P1000 using Tapatalk 2
Not yet but if we do, we'll sure to let you know.
Create an alarm and give it a name. In my case I created "work". Set the ringtone and volume that you want for that alarm. Any alarms you want to use can be dropped into the ringtones folder and will be accessible to the alarm program. Save it. In svoice ask for that alarm by name, in my case "work alarm on" it will show that alarm and time, if that time is good say yes and you're rolling with the tones and volume you set. If not say "Change time to "Xam" and it will ask if you want to make the change, say yes.
A work around but it does work.
Thanks for that. I hadn't thought of asking for an alarm by name and then being able to change it's time, all via s voice.
I did get it to do what I wanted, though in a roundabout way.
Firstly, I always use a particular song and with the alarm clock app I generally use have it set as an increasing volume alarm. I only need it fairly soft so I have the volume down pretty low. To do this first part I use Audacity on my laptop and used the Fade In effect twice to create my alarm.
I then renamed the song to the same name as the song/tone that is used as the default in the stock alarm app. Then using root explorer I replaced the original tone with my renamed song. Now any time I set an alarm it is set to my default sound and volume and I am most happy.
2D Volume
hi
try this app
2D Volume
this is professional audio manager app that contain profiles and volume pop up
the Download Link attached to this post
I've got a few of these up and running flawlessly now so I understand how they work. I'm trying to create one of these for my bedside and having a bit of a problem doing a couple things that I'm trying to do.
First off, is there a way to make the tag a toggle of all adjustments? In other words, I want it to silence the ringtone & notification tone and turn vibrate off amongst other things and then enable them again in the morning with another swype of the same tag. I thought I read somewhere how you could do this but I'm not seeing the option(s) in NFC Launcher now.
Also, I'm having a difficult time getting it to launch the alarm clock app. I can have it launch the clock but then it takes a few more steps to get the alarm clock armed. Using an older version of the Clock that comes with previous versions of Android and Launcher Pro I can create a shortcut on my homescreen that takes me right into the alarm with a single press. Using this knowledge I select 'launch app' from within NFC Launcher and tell it the app is 'Clock' and then under that is a field for what within the app you specifically want to launch. I've tried 'Add alarm' which is the exact verbiage of that screen and nothing happens. I've even tried the text of the option I select from the homepage shortcut I created which is 'com.android.alarmclock.AlarmClock' and that also does nothing. I know the possibility is there but I can't seem to get it to work.
Lastly, if I'm unable to get the alarm clock launch to work as described in the previous paragraph another option would be the 'Alarms' section within NFC Launcher and then the timer one where I can set an alarm for 8hrs from whenever I scan the tag. This would be perfect but nothing I do disables the vibrate and I HATE the vibrate going off with my alarm because it's so loud and startling. I prefer a quiet audible alarm sound since I'm such a light sleeper. A phone rattling loudly on my nightstand jolts me into fight or flight mode... not a great way to start your day.
OstrichSak said:
First off, is there a way to make the tag a toggle of all adjustments? In other words, I want it to silence the ringtone & notification tone and turn vibrate off amongst other things and then enable them again in the morning with another swype of the same tag. I thought I read somewhere how you could do this but I'm not seeing the option(s) in NFC Launcher now.
Click to expand...
Click to collapse
You'll want to use a switch tag for this.
OstrichSak said:
Also, I'm having a difficult time getting it to launch the alarm clock app. I can have it launch the clock but then it takes a few more steps to get the alarm clock armed. Using an older version of the Clock that comes with previous versions of Android and Launcher Pro I can create a shortcut on my homescreen that takes me right into the alarm with a single press. Using this knowledge I select 'launch app' from within NFC Launcher and tell it the app is 'Clock' and then under that is a field for what within the app you specifically want to launch. I've tried 'Add alarm' which is the exact verbiage of that screen and nothing happens. I've even tried the text of the option I select from the homepage shortcut I created which is 'com.android.alarmclock.AlarmClock' and that also does nothing. I know the possibility is there but I can't seem to get it to work.
Click to expand...
Click to collapse
That field is for the activity (so package.activity). However Google's new packages have different class names than their activity names (thanks for that by the way). The Alarm clock is com.android.deskclock.AlarmClock - however this probably won't launch right now. It will in the next update (it's working for me without a problem here on what will be the next release). Support will also be in place for class/activity notation so you could pass in com.google.android.deskclock/com.android.deskclock.AlarmClock and not worry about it (Although this will require more space on the tag).
OstrichSak said:
Lastly, if I'm unable to get the alarm clock launch to work as described in the previous paragraph another option would be the 'Alarms' section within NFC Launcher and then the timer one where I can set an alarm for 8hrs from whenever I scan the tag. This would be perfect but nothing I do disables the vibrate and I HATE the vibrate going off with my alarm because it's so loud and startling. I prefer a quiet audible alarm sound since I'm such a light sleeper. A phone rattling loudly on my nightstand jolts me into fight or flight mode... not a great way to start your day.
Click to expand...
Click to collapse
I don't know about vibrate. All I do is pass the intent off to the alarm handler and tell it set an alarm for X:YY time and it handles the rest. There aren't any public extras to pass with the intent to set vibration or sound preferences. I could look at the actual alarm clock source and see if it accepts any, but that is likely device dependent and wouldn't work on skinned devices.
Thanks for the quick response!
krohnjw said:
You'll want to use a switch tag for this.
Click to expand...
Click to collapse
So, this is a special type of physical tag that one must buy? I bought ten of these and they seemed like decent tags but it sounds like this may not work or are you talking about some software adjustment I'm just not seeing?
krohnjw said:
That field is for the activity (so package.activity). However Google's new packages have different class names than their activity names (thanks for that by the way). The Alarm clock is com.android.deskclock.AlarmClock - however this probably won't launch right now. It will in the next update (it's working for me without a problem here on what will be the next release). Support will also be in place for class/activity notation so you could pass in com.google.android.deskclock/com.android.deskclock.AlarmClock and not worry about it (Although this will require more space on the tag).
Click to expand...
Click to collapse
So, what I'm doing currently is right, it's just that it's not fully propagated on the app's end and will be by the next update.... correct?
krohnjw said:
I don't know about vibrate. All I do is pass the intent off to the alarm handler and tell it set an alarm for X:YY time and it handles the rest. There aren't any public extras to pass with the intent to set vibration or sound preferences. I could look at the actual alarm clock source and see if it accepts any, but that is likely device dependent and wouldn't work on skinned devices.
Click to expand...
Click to collapse
My settings via your app on this particular tag is to turn the vibration of the phone off but I think that the alarm clock overrides this as well as a silent setting to play a tone for the alarm. I looked for a setting to disable the vibrate within the Clock but am not seeing it. I can for the alarm but not for the timer which was plan B as described above.
In the app, new tag -> new switch. Same physical tag.
A switch tag toggles between two task tags.
Sent from my Galaxy Nexus using xda premium
krohnjw said:
In the app, new tag -> new switch. Same physical tag.
A switch tag toggles between two task tags.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
aHA! That's where it was.
As an example I'm going to make a Toggle to do the following:
Night mode
Ringer: Silent
Notification: Silent
Vibrate: Off
Notification light: Disabled
Morning mode
Ringer: Enabled
Notification: Enabled
Vibrate: On
Notification light: Enabled
Now, the question is about the clock. I realize I will be able to launch it with a setting but can I have it disabled (say I wake up before my alarm) and can I put both of these on a Toggle switch? So on the first swipe it launches the clock and on the second swipe it disables it?
OstrichSak said:
aHA! That's where it was.
As an example I'm going to make a Toggle to do the following:
Night mode
Ringer: Silent
Notification: Silent
Vibrate: Off
Notification light: Disabled
Morning mode
Ringer: Enabled
Notification: Enabled
Vibrate: On
Notification light: Enabled
Now, the question is about the clock. I realize I will be able to launch it with a setting but can I have it disabled (say I wake up before my alarm) and can I put both of these on a Toggle switch? So on the first swipe it launches the clock and on the second swipe it disables it?
Click to expand...
Click to collapse
As far as I'm aware the alarm clock handler doesn't take an incoming intent to disable an alarm (I looked at the source some time back to resolve getting it auto set in ICS). It might be possible to directly edit the alarms database, but there's no guarantee this will work on any device that's not an AOSP based device (Since HTC likes to make arbitrary modifications sometimes) so that might not get implemented as it would just be potentially broken on a lot of devices. I'd have to take a look into those data stores though.
krohnjw said:
As far as I'm aware the alarm clock handler doesn't take an incoming intent to disable an alarm (I looked at the source some time back to resolve getting it auto set in ICS). It might be possible to directly edit the alarms database, but there's no guarantee this will work on any device that's not an AOSP based device (Since HTC likes to make arbitrary modifications sometimes) so that might not get implemented as it would just be potentially broken on a lot of devices. I'd have to take a look into those data stores though.
Click to expand...
Click to collapse
Sounds like more trouble then it's probably worth. I can just put 'Launch app' 'Clock' in both activities and then manually activate and deactivate as needed. It would be cool to have it 100% automated but I don't know how necessary that's going to be.
Now I just wish I could figure out how to disable the vibrate from the stock timer so that I can set a toggle to have it go off 8 hours from when I swan the tag as my alarm clock since I don't go to work and always set my alarm for 8hrs from when I go to bed. Most of the time I wake up before it goes off so this is why having it disable with a scan of a tag would be ideal but I realize this could be more effort than it's worth. I'm just scratching the surface on what I can do with these tags so I'll just test out what all I can do with them as they stand.
When do you think that update will occur so that I can launch straight into the alarm clock rather than launching the Clock and having to take another step to get to what I want to get to?
OstrichSak said:
Sounds like more trouble then it's probably worth. I can just put 'Launch app' 'Clock' in both activities and then manually activate and deactivate as needed. It would be cool to have it 100% automated but I don't know how necessary that's going to be.
Now I just wish I could figure out how to disable the vibrate from the stock timer so that I can set a toggle to have it go off 8 hours from when I swan the tag as my alarm clock since I don't go to work and always set my alarm for 8hrs from when I go to bed. Most of the time I wake up before it goes off so this is why having it disable with a scan of a tag would be ideal but I realize this could be more effort than it's worth. I'm just scratching the surface on what I can do with these tags so I'll just test out what all I can do with them as they stand.
When do you think that update will occur so that I can launch straight into the alarm clock rather than launching the Clock and having to take another step to get to what I want to get to?
Click to expand...
Click to collapse
Probably next week. I have some translations to get completed before releasing.
Sent from my Galaxy Nexus using xda premium
krohnjw said:
That field is for the activity (so package.activity). However Google's new packages have different class names than their activity names (thanks for that by the way). The Alarm clock is com.android.deskclock.AlarmClock - however this probably won't launch right now. It will in the next update (it's working for me without a problem here on what will be the next release). Support will also be in place for class/activity notation so you could pass in com.google.android.deskclock/com.android.deskclock.AlarmClock and not worry about it (Although this will require more space on the tag).
Click to expand...
Click to collapse
To revisit this... the way I came up with 'com.android.alarmclock.AlarmClock' was because I was Googling a way to make a shortcut on my homepage to launch right into the alarm clock. I found one but it used an older version of the DeskClock which I recovered from an old backup from Titanium Backup. It works great as a homepage shortcut but is there a way I can make a shortcut using the new clock? If I can I can delete the older style Desk Clock I had to install and then when the new update to your app comes out I can use that to go right to it. I also just noticed that in the new clock there is an option for: 'com.htc.android.worldclock.alarmclock.DeleteAlarm' so maybe the automatically disabling is possible or will this delete an entire Alarm profile? Since you seem to know WAY more about these clocks than I do is there a way to get with the new clock what I've done using the old clock? I mean the 'com.android.alarmclock.AlarmClock' shortcut... does that exist for the new one? I tried different ones that looked like they may be the right one but it wouldn't launch at all.
Hopefully you understand the way I explained all of this. If not I can try to elaborate whatever parts you don't understand.
Edit: BTW, here is a list of the possible choices and all start with 'com.htc.android.worldclock...
WorldClockTabControl
Relaunch*
TimeZonePicker
DeleteTimeZone
RearrangeTimeZone
SetAlarm*
DeleteAlarm
AlarmAlert*
OffAlarmAlert
HandleSetAlarm*
TimerAlert*
SettingsActivity
SoundSelect
The ones with an asterisk are ones that I've tried to create a shortcut on the homepage using 'Add>Shortcuts>Activities (this requires Launcher Pro)>Clock and then I can choose what action within the app. This is how I was able to set a homepage shortcut using a previous Clock app and if I can figure out how to do the same thing with the new Clock that comes with ICS I will delete the old clock I installed and then use this information moving forward once the NFC app is updated.
krohnjw said:
Probably next week. I have some translations to get completed before releasing.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thanks.
Does anyone know if it is possible to have your notifications go off multiple times? I switched from an iPhone 4 which let me repeat every 3 minutes. Is anything like that possible?
It looks like the minimum time interval for repeating events is one day. The Clock/Alarms will allow you do repeat an alarm on specific days (weekly). The calendar app will let you repeat events daily/weekly/monthly/yearly.
I searched for "alarm" on the Play market and tried the top two third party alarm apps and neither appeared to have the feature you described.
You could create an alarm and set the snooze for 3 minutes or create three separate alarms spaced 3 minutes apart.
I mean for text messages and emails. Not alarms. Sorry for the misunderstanding.
Sent from my SAMSUNG-SGH-I747 using XDA
Ah, I misunderstood. I don't see a way to have notifications repeat in the default apps and settings.
After a quick google search, it looks like the app "Handcent SMS" will do what you described.
Once installed, go in to Settings-->Notification Settings-->Notification Settings(again)-->Enable Reminders
The settings there will allow you to set how frequently you'll receive reminders for unread messages.
I want to make use of my Galaxy S5 which is laying under the table hole time and I want your ideas.
My wish so far is to make it speak at loud current weather every 2h, for now I have app that says notifications at loud but I didn't find weather app that puts notifications with weather details as text every few hours, every weather app I installed so far just puts widget in notification area.
EZY-E said:
I want to make use of my Galaxy S5 which is laying under the table hole time and I want your ideas.
My wish so far is to make it speak at loud current weather every 2h, for now I have app that says notifications at loud but I didn't find weather app that puts notifications with weather details as text every few hours, every weather app I installed so far just puts widget in notification area.
Click to expand...
Click to collapse
You can do tons of ideas. One is to make your s5 a dash camera for your car. Another is to use it strictly as a music player in your car. You could also use it as one of those live picture frames. Creativity is key!
I managed to make it speak IFTT notifications about weather at loud for now, every morning and before going to bed.
I want it to be like some kind of info center that speaks useful informations through day, but don't have any other ideas.