Related
OK well I have trying my best as a noob to research for 2 days not in and out on how to fix my issue
My friend tried rooting my phone and to install a different rom. I am on 2.1 and unfortunately I got the phone used with 2.1 already on it so I don't know if it was a leaked or legit 2.1 rom, and I am learning as I go here to fix this issue as I have never new how to do this stuff nor have I ever done it.
Where I am at now:
only thing that happens when I hit power is the phone "vibrates then stays on the 3 skateboard screen" or press "volume down + power" and it goes to the Hboot screen. I go into recovery and it goes to clockworkmod and from there after trying to install any roms from the sd card it says on the last 3 lines
"E:Failure at line 9:
copy_dir PACKAGE:system SYSTEM:
Installation aborted.
and every time I go back or power up to the Hboot screen it does not have any "update bar" (I guess if this was done right as I read on other threads there should be some type of update bar) on the right corner or any other options "for me to select" accept:
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
and then with some other info above the Hboot highlighted in blue
I have tried formatting the sd card a bunch of times, I did the clearing of the "wipe data, wipe cache partition, wipe dalvikcache" as I read to do over my reading, but I see that if I go under any restore options under clockwork, no files are found for me to back up too so I am seeing he did not back up any of my info, I also have tried using 2 different ds cards.
So more less it looks like my options are to get this fixed from the only place my phone will boot to with options and thats when I press volume + and power so I guess loading whatever I need to my sd card>>if thats an option or am I screwed, I have seen many tutorials but none of them start where my particular position is stuck at in Hboot. this is my only phone and I had to buy a prepaid which is just about out of minutes, I put an add on craigslist trying to get someone I will pay to fix my issue but no luck, please I need help and I will pay u somehow to guide me through this of my exact issue, I was trying to get to rom 2.3 but if it's easier to get back to 2.1 rom then so be it.
PLEASE!~~
Please HELP!
Cheeva316 said:
Please HELP!
Click to expand...
Click to collapse
Got a solution in the making for you, just give me about 30 minutes.
Edit: Maybe 45 minutes lol, sorry i'm testing this before I have you do it to see if it works.
Ok download the following files:
http://www.mediafire.com/?njwqa7axwzyaqgb
http://www.mediafire.com/?f69cl8dc747h0l9
http://www.mediafire.com/?xg8nnqs177xggx4
http://www.mediafire.com/?qxpi5wsx5lzbhbo
http://www.mediafire.com/?4tg67hck7vh1xxs
Edit: Flash the "rootme.zip" first then follow the rest.
Now what you need to do first is extract the "nandroid" file to somewhere you can easily find it.
Now take the folder called "nandroid" along with all the other zip files you downloaded and place them on your sd card. Put your sd card in your phone and power on with volume down+end. Press volume up. Use the trackball to select "Backup/Restore". Use the trackball again to select "Nand Restore". Use it again to select "HT9BGHG01402". Use it again to select "BDS-20110125-0901". Let the restore run, then power off your phone. Turn your phone back on with just the power button, let it run (might even take up to 10 minutes for the phone to start up). Let me know if the phone boots up or not after about 10-15 minutes. This should work and if it does then we can go from there, even to getting you 2.3 if you want.
You might be asking, what the hell is he having me do ? Here's what i'm doing. I made a nandroid backup a few months ago of when I had kaosfroyov39 which is a 2.2 rom. I am going to have you flash MY backup to YOUR phone which when done right, CAN work. Anyway, let me know what happens and remember to give the phone about 10-15 minutes to boot all the way.
Cheeva316 said:
"E:Failure at line 9:
copy_dir PACKAGE:system SYSTEM:
Installation aborted.
Click to expand...
Click to collapse
( Another phone on the precipice of being ruined by someone's cobbled-together "clockwork" recovery. )
If the /system flash memory partition got corrupted in a way that left a lot of pages marked as bad pages, then the /system partition will be "short", and only small ROMs will successfully load into it, if at all. That might be the cause of the above error messages.
But - because you are using Clockwork, there is really no way to know if that is the case, or if you simply have a whole bunch of corrupted ROM files on your SD card. That's because Clockwork does not verify ROM files before it starts flashing them - which allows total garbage to be flashed to the phone. (That's why Clockwork should never be used by newbs).
Here's what I would suggest you do.
- Make sure you are keeping the phone well charged. (Leaving the phone in HBOOT mode will discharge the battery quickly, even if it is plugged in to the charger, BTW).
- Report the exact bootloader version you have - probably 1.47.0000 or 1.49.0000, but it could be something other. Please be precise.
- With the power off, eject the SD card out of the slot and see if you can boot into the normal HBOOT menu with no SD card in the slot. Report your result.
- Boot into the recovery menu and tell us what version # of the recovery you have. If you can determine the details of how your friend attempted to root the phone, that might be pertinent. Again - precise details are valuable; vague hand-waving not so much.
- The Amon_RA recovery has a mode ("USB-MS toggle") which allows you to mount the SD card to the PC. Does your "Clockwork" recovery have this feature, or are you able to put files onto the micro-SD card using a media slot on a PC?
- Be aware that one or two people that were in situations that are very close to what you described ended up bricking their phones because they went from where you are now to attempting to use either a PB00IMG.ZIP ROM, or an RUU utility. Their phones went from bootable (in the way that yours is now) to bricks in that process.
What I would suggest you do at the moment is to find the SMALLEST Eris** ROM you can find, get it onto your SD card, verify that you didn't corrupt it, and then perform a "wipe data/factory reset" in your recovery and attempt to install it. If you get the same errors as above, then you should definitely NOT try to do a PB00IMG.ZIP or RUU installation. (The current gingerbread ROMs (e.g. GSB v1.4) are pretty small - they only use about 65% of the /system partition.)
I have a flashable "repair" file which might be applicable. It is not a "ROM" per se - it uses some low-level MTD (flash memory) repair techniques, and also flashes into place the original Amon_RA (v1.6.2) recovery, instead of whatever p.o.s. "Clockwork" recovery you currently have on the phone; but I regard it as something which should only be used as a last resort. But - without some more details and testing on your part, I don't feel comfortable about posting it up.
Let me know.
**PS I wanted to ask one more question - this is an Eris we are talking about, right? (I note you were posting in the Hero CDMA forum not so long ago).
Well I want to thank you for replying with such info but it seems that the recovery image file that I reinstalled on the phone was bad cause when it was updating the bar was going up but as it was going through each item it was updating.. I noticed "bootloader in red letters" with I believe saying "error" next to it and then same on another item it tried updating then the phone powered off and now it's dead, tried everything, no charging light comes on, computer (2 different computers) wont reconize it, it's doing nothing at all, I will try to get my hands on another battery but I am broke, but I doubt it's the battery cause I heard with a bootloader error (or damaged) then the phone won't boot up or do anything so I guess the phone is scrap for parts which sucks cause now my friend who started this deal killed my only phone me n my family had, another lesson learned...time to try n sell some stuff on craigslist..damn
Yes it's a Droid Eris...or was! damnnnn...
Again thank you for your help very much appreciated...
Wish I would of read this part before I let my friend re-load the "PB00IMG.ZIP" cause thats exactly what he loaded and then it started the process what I jus described above..f***k!
Be aware that one or two people that were in situations that are very close to what you described ended up bricking their phones because they went from where you are now to attempting to use either a PB00IMG.ZIP ROM, or an RUU utility. Their phones went from bootable (in the way that yours is now) to bricks in that process.
Cheeva316 said:
Wish I would of read this part before I let my friend re-load the "PB00IMG.ZIP" cause thats exactly what he loaded and then it started the process what I jus described above..f***k!
Be aware that one or two people that were in situations that are very close to what you described ended up bricking their phones because they went from where you are now to attempting to use either a PB00IMG.ZIP ROM, or an RUU utility. Their phones went from bootable (in the way that yours is now) to bricks in that process.
Click to expand...
Click to collapse
Well, I am very sorry that this happened to you and my advice to you didn't reach you in time. From the details that you added, I am pretty sure that you indeed have a hard brick.
BUT - the death of your Eris can still help others avoid the same fate. If you can reconstruct the rooting process you went through,
[SIZE=+2]PLEASE LET US KNOW EXACTLY WHAT ROOTING METHOD YOU USED[/SIZE] - and then we can wave people away from it.
When I say exactly, I mean extremely specific: do you still have the download file that you used? If so, push it up to an uploader site and give a link to it. (I think you mentioned unrevoked or something). Do you still have the exact link you used to download that rooting software? Was it Unrevoked? Z4root?
bftb0
I will tomorrow as I saved all the files on my laptop n I am on my pc now, but will do try my best as I am a newb to this phone stuff
Did you try what I suggested or is it too late ?
phone wont do anything so cant do nothing...
Did you find out any more details about the rooting method you used?
might be a couple more days till I can get to it, my laptop is messing up now...all the saved info was on it
Everything was great.. did the update rebooted gtab worked great. Has always been stock. I shut it down and when I got home from work i hit the power button and I get the viewsonic birds then the tap n tap logo then the n just stays there and that is it has been stuck on the n for hours. I turn it off and back on and the same thing. Any advice would be appreciated.
Thank you
Have the same problem on stock Gtab.Mine gets to the birds and sticks.Tried holding power and volume up at the same time, but won't reset.Can't discharge the battery because it still goes into sleep mode after 10 min.Computer won't read when plugged into USB.Bought on Woot so a return will be a major p.i.t.a. I am new to Android devices
and was just getting enough balls to try rooting and flashing!!! FML
Yea bought mine from woot also... I liked the stock rom was also afraid to try to load a new rom. Looks like I will be sending it back
hvideo1 and sepder,
You have a choice to make. What both of you have is called a "boot loop".
Sometimes they happen because somebody does something wrong -- and
sometimes like in your case they just seem to happen.
You can return them if that is your desire -- or you can try to fix them.
Usually if one partitions the tablet and cleans it up, it can be fixed. But
that means you have to do some quick learning.
First, you have to get back to a fully stock, hopefully working version. Look
at the following procedure -- which we wrote hoping everyone would be able
to understand and use:
http://forum.xda-developers.com/showthread.php?t=861950
If you complete this procedure and the reflashed stock version works, then
we can load a program called CWM and do the partitioning and cleaning. If
the boot loops persist, then a second choice is to nvflash CWM and use it
to partition/clean up.
http://forum.xda-developers.com/showthread.php?t=865245
http://forum.xda-developers.com/showthread.php?t=1030042
The threads above give you more info on the various procedures.
Post back here what you decide to do or if you have questions.
Rev
I would try a simple data wipe first. Much easier and less invasive.
http://forum.xda-developers.com/showthread.php?t=1030915
Thanks for the replies. I don't want to send my gtab back so I'm reading both post and going to see what happens. I will reply back (hopefully with the gtab) Thanks again
I'm in the same boat as hvideo1 and sepde
Already tried the nvFlash first method mentioned by butchconner but can't get past the "Booting recovery kernel image" message, just sits there on the viewsonic splash.
Going to read and try the "CWM and do the partitioning and cleaning" next.
Appreciate everyone's help!
lrgche,
To NVFlash, you have to press Power/Volume - to activate APX. It will usually come
up with the white screen and then turn black.
"Booting recovery kernel image" indicates you may be pressing Power/Volume + , which
starts up Recovery -- a different process.
Go back through the procedure again and double check that everything is right and
it should work.
Rev
K J Rad said:
I would try a simple data wipe first. Much easier and less invasive.
http://forum.xda-developers.com/showthread.php?t=1030915
Click to expand...
Click to collapse
This worked for me. Thank you back up and working. the only reason I didn't go the other way was because I didn't understand alot of reading and just confused me (not hard to do)
Lol. Thanks to both of u
hvideo1 said:
This worked for me. Thank you back up and working. the only reason I didn't go the other way was because I didn't understand alot of reading and just confused me (not hard to do)
Lol. Thanks to both of u
Click to expand...
Click to collapse
Glad to help. You should learn that other procedure if you plan on doing any serious modding in the future though. It may become necessary next time.
Update: Hallelujah, we have seen the birds!
Just for future reference to those of you who may be stuck in an "APX loop", where NVFlashing and even repartioning do not work for you. I tried many things, and only one thing worked.
Didn't work:
1) NVFlashing to anything
2) Repartioning or wiping
3) Wiping out all storage on the SD card
After doing many, many rinse and repeats on the above, the only thing that did work were these instructions:
imurg said:
Please check this thread
http://forum.xda-developers.com/showpost.php?p=11306979&postcount=92
Note that he is using the NVFLASH_46 and although is has been deprecated, it works like a charm:
1) NVFlash the g tab_46 (it works with 46 and doesn't with other)
2) Let it finish and boot up
3) Go to storage setting and unmount the sd card.
4) Run a format.
5) Go to security and do Restore to factory settings
6) As part of this it will reboot. When restarts you'll see the birds. Everything is back to normal.
Click to expand...
Click to collapse
Now, I don't know of too many cases like mine where APX was the only thing that was working and that no amount of CWM or NVFlashing could bring back whatever was wrong with the bootloader, but this method forced a recovery image restore and got me back to the point where I can now power down and reboot. And for that, I thank this fine community!
I think we need a better guide somewhere on... Stages of recovery. If this doesn't work, here's the next deeper level. (Example: Level 1, wipe data/cache and reflash the rom. Level 2: Repartition and fix permissions. Level 3: NVFlash for 1.1 or 1.2 back to stock. Level 4: run the steps I have listed above. Level 5: fixing the bootloader. Level 6: Remove the case cover and short the back.)
Anyways, thanks again guys. Hopefully someone else will search with the same issue I had and get fixed as I have.
try this (not a developer here) when it boots up use your computer to delete all the files on the sd card so it looks blank- not sure if it will fix your issue but if there is a file on there messing your reboot into cwm that should will get rid of it. let me know how it goes. (standard at your own risk disclaimer) i have done this before just to see what would happen and nvflash brought it back up.
Hey, thanks for the reply. The sdcard was already blanked out through my various steps, so that doesn't appear to be the problem. Same things happen.
Now, that's just the app data and such on the sdcard, so I am guessing if I was able to see/delete all the system files instead via USB and delete it that way, I'd see something else.
just to bee clear i would delete everything on there not just the system files- so when you go to the drive from your computer it shows nothing at all.
here are the steps i would take start to finish.
1 nvflash rom
2 connect to computer, mount usb, then highlight and delete all files on gtab.
3 nv flash again (preferably with a stock rom with cmw pre loaded
4 reboot and pray that this fixed it.
OP - What size is the nvflash file you are using? I have run into a similar issue before with the larger nvflash.exe (like 152kb). It should be 140KB.
Just something else to check.
So to clarify, when you nvflash the 3588 stock image, it will automatically reboot at the end of the nvflash_gtablet.bat batch file?
pugsby said:
Hey all. Little frustrated since I've tried most of the tricks and still have a soft-bricked device. Not sure how it happened originally, but one way or another, I have a bad bootloader and no access to CWM.
APX works. I can NVFlash 1.1 or 1.2-based Stock or otherwise roms, and they boot (once, and only once...) . I can get USB mount. I've tried them with and without CWM pre-installed and see no differences.
But as soon as I reboot or power off, it just returns to APX mode. It is only a black screen, however. No birds, no logo, no nothing. The only way to make it boot again is to NVFlash it again.
All the instructions say to enter CWM to re-partition or to wipe data. That's great, but I have no access to CWM. Pressing the buttons during bootup does nothing because the device never makes it that far through bootup. And the format utility doesn't wipe enough data to return this back to a truly blank device, because when I nvflash, my apps still show to be there and I want it back to a blank slate.
I've tried pressing the buttons directly after a NVFlash to enter CWM that way, but it just goes straight into the rom.
Others have suggested popping off the back of the case and grounding out things to reset that way, but I thought that was just if APX didn't work, but APX is the only thing that DOES work, so not sure if it applies. (Let me know if I'm wrong there)
More things to try?
Click to expand...
Click to collapse
With the tablet in APX mode and plugged into your computer...
1) Open a command shell
2) Navigate to your nvflash directory
3) type in the following command but DO NOT hit enter
nvflash --bl bootloader.bin --download 6 part6.img --go
4) Hold down the volume UP key on the tablet and press the enter key on your computer.
5) Continue to hold the volume UP key until the tablet starts the nvflash.
6) Release the volume up key and when the nvflash finishes it should boot into CWM
After you repartition, wipe data, clear cache, etc. it might still loop into APX. If it does you'll need to force it to install a new bootloader. I'll dig up a link to the procedure if you need it.
I'm interested to know what the hell you did to get to the apx bootloop in the first place. I've gone through great lengths to try to replicate people's problems. I've even purposely done things out of order, done things wrong, drop the gtab couple times, etc. and I've never run into this problem.
goodintentions said:
I'm interested to know what the hell you did to get to the apx bootloop in the first place. I've gone through great lengths to try to replicate people's problems. I've even purposely done things out of order, done things wrong, drop the gtab couple times, etc. and I've never run into this problem.
Click to expand...
Click to collapse
I've worked on quite a few of these and still can't replicate it on my own either. Most of them had flashed an incompatible version of ClockworkMod (usually with ROM Manager) and a few had tried to move from Cyanogen directly to a 1.2 based ROM. A very small minority of them had issues with their internal flash memory. No one consistent thread that ties them all together that I've found. One interesting point though... In every case it was easy to recreate the problem after the tablet had been "Fixed." All I had to do was nvflash with the same image that was traditionally used for returning the devices to stock (bekit 1105).
K J Rad said:
I've worked on quite a few of these and still can't replicate it on my own either. Most of them had flashed an incompatible version of ClockworkMod (usually with ROM Manager) and a few had tried to move from Cyanogen directly to a 1.2 based ROM. A very small minority of them had issues with their internal flash memory. No one consistent thread that ties them all together that I've found. One interesting point though... In every case it was easy to recreate the problem after the tablet had been "Fixed." All I had to do was nvflash with the same image that was traditionally used for returning the devices to stock (bekit 1105).
Click to expand...
Click to collapse
I'v tried rom manager, wrong cwm version, and wrong bootloader. And I still can't replicate this apx bootloop thing. And I have 2 gtabs to work with. A 3rd one should be coming soon. Weird.
Added by edit.
I'm assuming you're some kind of technician or repairman? If so, then it's good that you're telling me this. I've been considering the possibility that this apx bootloop thing is not really an apx bootloop but rather something the user is doing or a button is stuck or something silly like that. Good to know the problem is real.
Mind telling me how you fix this? Since I can't replicate this, I have no idea how to even begin fixing this.
Acidburn find out a solution for this problem
Please check this thread
http://forum.xda-developers.com/showpost.php?p=11306979&postcount=92
Note that he is using the NVFLASH_46 and although is has been deprecated, it works like a charm:
1) NVFlash the g tab_46 (it works with 46 and doesn't with other)
2) Let it finish and boot up
3) Go to storage setting and unmount the sd card.
4) Run a format.
5) Go to security and do Restore to factory settings
6) As part of this it will reboot. When restarts you'll see the birds. Everything is back to normal.
Good luck
K J Rad said:
With the tablet in APX mode and plugged into your computer...
1) Open a command shell
2) Navigate to your nvflash directory
3) type in the following command but DO NOT hit enter
nvflash --bl bootloader.bin --download 6 part6.img --go
4) Hold down the volume UP key on the tablet and press the enter key on your computer.
5) Continue to hold the volume UP key until the tablet starts the nvflash.
6) Release the volume up key and when the nvflash finishes it should boot into CWM
Click to expand...
Click to collapse
This got me into CWM (Yay!). This, however, did not fix the APX looping (boo).
I repartitioned, wiped, nvflashed, wiped, repeat. Even though I have more options now with CWM, the end outcome is still the same that after the initial boot, it won't boot again.
BUT, I did find a working method. See the original post.
goodintentions said:
I'm interested to know what the hell you did to get to the apx bootloop in the first place. I've gone through great lengths to try to replicate people's problems. I've even purposely done things out of order, done things wrong, drop the gtab couple times, etc. and I've never run into this problem.
Click to expand...
Click to collapse
I was hoping you'd respond, goodintentions, as I used your NVFlash files and instructions this last time around from your very handy site.
I'm not sure exactly what happened. I do know that Rom manager was involved somehow, trying to use that integration with recovery. (I know, not recommended, but at first it acted like it would work).
Also, I think a 1.2 Rom was mistakenly flashed on top of a 1.1 bootloader somehow.
The details are fuzzy. It's been so many things since then that who knows..
goodintentions said:
I'v tried rom manager, wrong cwm version, and wrong bootloader. And I still can't replicate this apx bootloop thing. And I have 2 gtabs to work with. A 3rd one should be coming soon. Weird.
Added by edit.
I'm assuming you're some kind of technician or repairman? If so, then it's good that you're telling me this. I've been considering the possibility that this apx bootloop thing is not really an apx bootloop but rather something the user is doing or a button is stuck or something silly like that. Good to know the problem is real.
Mind telling me how you fix this? Since I can't replicate this, I have no idea how to even begin fixing this.
Click to expand...
Click to collapse
I am a tech. Been working with/on/in electronics and computers for roughly 35 years. I had a hard time believing the problem was real until I had one in my hands that was doing it. I've tried doing it to my own tablet but a simple nvflash always got me going again.
imurg said:
Please check this thread
http://forum.xda-developers.com/showpost.php?p=11306979&postcount=92
Note that he is using the NVFLASH_46 and although is has been deprecated, it works like a charm:
1) NVFlash the g tab_46 (it works with 46 and doesn't with other)
2) Let it finish and boot up
3) Go to storage setting and unmount the sd card.
4) Run a format.
5) Go to security and do Restore to factory settings
6) As part of this it will reboot. When restarts you'll see the birds. Everything is back to normal.
Good luck
Click to expand...
Click to collapse
This is successful in some cases but not all. In some cases the bootloader has to be updated using factory stock recovery. ClockworkMod and nvflash don't update the bootloader (and I suspect some other system related partitions/information) properly. For those cases the fix is a little more complex. This process...
http://forum.xda-developers.com/showpost.php?p=13474033&postcount=114
has worked on all but one of the tablets I've recovered. The odd one out required an extra reboot (though I was doing the steps from memory and on an unfamiliar computer so I could be mistaken). However... as noted above... a subsequent nvflash of even the same image resulted in another APX loop. The end result was I had to craft a custom nvflash for each of those machines to avoid the problem in the future. That may or may not be necessary for all cases but since it's relatively easy I just do it out of habit now.
Keep in mind that serious APX looping issues are very rare in the grand scheme of things. Many times folks get confused and fail to follow directions properly and think they have a bigger problem than they really do. The overwhelming majority of times a simple nvflash and repartitioning will fix these things right up.
Added: BTW, the best way I've found to avoid the APX loop issue entirely... do a data wipe before you flash a new ROM and then again immediately after and before you boot it for the first time. I know... one should be enough... but if you make it a habit to do two... then you'll probably remember to do at least one of them ;-)
Great info. I shall try not to enter another painful APX loop. I was shocked how many things I had to try and places I had to go before I found a working method. I guess I really did a number on this thing somehow. But I'm happy that it's back.
I didn't have to do the more painful one you mentioned, but honestly I was ready to try about anything short of slaying a dragon.
I have yet to find an answer to this while searching for the past day, so I'm going to ask about it here.
My LG Optimus V's (just got it a few days ago as a birthday present) screen seems to be permanently blank... In case someone asks... yes, it is activated.
What Happened:
I rooted the phone using Gingerbreak 1.2, installed rom manager/clockwork recovery mod, then attempted to backup my phone in case something went wrong. However, when I started the backup, I noticed that the screen was completely blank. I was kinda freaking out, so I just took a shower while it did it's thing. When I came back, it was done creating the backup and it showed up in Rom Manager. After toying with some of the things I can do with it rooted (I only rooted it to see how much of a difference it would make without changing the kernel), I decided to recover that backup. When my phone restarted to recover the backup, the screen was blank once again. After waiting for over an hour, I concluded that it must have finished (since my HTC Hero would finish restoring and never reboot until I tell it to) and took out the battery. Afterwards, it would show the LG splash screen... then the blank screen.
What I Did:
I was thinking about the android screencast java application a few hours after my problem first developed. I plugged my phone into my computer, got adb working, and android screencast showed me that my phone was actually getting stuck at the clockwork recovery mod screen. I tried many things... I installed a CM7 rom, flashed 3 different recoveries, flashed an overclocked stock rom, etc. Eventually, I flashed the stock rom (no changes whatsoever) and stock recovery. Now I can hear my phone, but cannot see it. However, I should note that while using CM7 the same thing happened. The only difference being that I could use android screencast to see the screen (the phone was actually working) with CM7. Now with the stock rom, adb is disabled and I cannot see the screen or do... anything.
What I Think I Should Do:
I'm thinking about calling Virgin Mobile and telling them that my screen is defected. If they see the issue they'll probably think that it's a hardware issue (for all I know, it could be) and they'll probably give me a replacement. However, if anyone as had the same problem and fixed it, I would love to know.
I would love you hear your opinion on this and, if possible, a fix. Thanks in advance!
(JIC, if I posed in the wrong section, I'm sorry...)
you poor souls reporting the symptoms of getting the newer screen hardware from the optimus s in your v's don't number in the double digits yet, but it's getting closer.
I posted a fix on AndroidCentral, see it:
here
good luck! the fix has worked for everyone I pointed to it so far.
btw, the screencast idea is excellent!
crud. stock recovery, you may be SOL.
you'll probably have to boot into custom recovery to use screencast or adb now.
use the unplug phone -> pull&replace battery -> hold home+volume down -> keep holding, press and hold power until lg screen goes blank to enter recovery. maybe adb will work in stock recovery, I dunno.
Thank you very much for the reply!
Yeah, you're right, I'm probably SOL... I still have one option though! Theoretically, I should be able to turn on ADB without being able to see my screen. I know how to access the settings without seeing it, but navigating myself to the "Applications", "Development", "USB Debugging" may be a little hard. I will attempt to do so. I will report my progress in a bit.
However, if you (or somebody else) could provide screenshots of a step-by-step process to turn on USB Debugging in the stock rom (since it's kinda hard to do remember where everything is and screenshots of different phones is kinda different) then I would appreciate it VERY much!
I shall update this in an hour or so.
UPDATE (9/2/11 - 9 PM):
I'm going to take a break for now. Good thing I give everyone my Google Voice number, I doubt anyone will notice a change. I'm going to flash a stock rom onto my HTC Hero so I can figure out where things are on the LG Optimus V (Same screen size) in an hour or so. I'll update my progress in like 2 hours.
UPDATE (9/3/11 - 8:10 AM):
I have been unable to turn on USB Debugging and it seems to be because I don't know where the confirmation after turning it on is located. However, I should note that when I boot into (I think) recovery, "adb devices" states that the device is attached but offline. If there is a way to make it "online" from stock recovery then I would love to know. For now, I will try everything I can.
UPDATE (9/3/11 - 8:22 AM):
Ok. I plugged my phone into the back of my computer and now when I do "adb devices" it detects the device in recovery mode. However, when I try "adb shell" it says "- exec '/system/bin/sh' failed: No such file or directory <2> -". I'll try some more stuff, but does anyone have any idea of what I can do? Android Screencast doesn't work either, so that's not an option.
UPDATE (9/3/11 - 9:42 AM):
Crap... now it's indefinatly booting into recovery... I had something like this happen before, I'll report my status in an hour or so...
UPDATE (9/3/11 - 12:36 PM):
My friend finally got my phone booting out of recovery again! Now all I have to do is get "USB Debugging" on and it SHOULD work!
I <think> there's a key combination to power up into the bootloader. if you can find it with searching here and android central.
I haven't been able to track that down today. If you can get into the bootloader, you can fix it. Search for asadullah's fastboot root instructions here if you find a way to get into the blue screen (the bootloader, which fastboot talks to.)
otherwise, I'll be done taking the kids to the (ugh) pool in a few hours and I'll search more.
try pulling your battery for a few minutes and see if the reboot cyle stops that way, at least it might get into recovery or the rom.
glad you got back into recovery again, not too sure how to help at this stage though, since I can't find a way to get into the bootloader with a power-on key combo. just emergency mode (useless to the V since the firmware from LG is missing a file) and safe mode. boo.
there is a youtube video for enabling usb debugging on the v, maybe it'll help you find the right spots to press.
http://www.youtube.com/watch?v=nHal0hPNS6s
edit: you can also try to reboot into the bootloader with adb, even though it's missing the shell... it's worth a try, and if it works you can flash xionia recovery with fastboot and things would be a lot easier from that point.
Code:
adb reboot bootloader
if that works but you need more help, a battery pull is the only way to power off with the bootloader except "fastboot reboot" will try to boot your rom.
Awesome, thanks for the replies! I'm going to try your suggestions now. I'll let you know how things work out in a few hours. I would have replied earlier, but to my satisfaction there was a surprise party planned for me, lol. I will defiantly try these out now.
Once again, thank you very much. I honestly did not expect a reply for something that happens to such few people.
bigsupersquid said:
I <think> there's a key combination to power up into the bootloader. if you can find it with searching here and android central.
I haven't been able to track that down today. If you can get into the bootloader, you can fix it. Search for asadullah's fastboot root instructions here if you find a way to get into the blue screen (the bootloader, which fastboot talks to.)
otherwise, I'll be done taking the kids to the (ugh) pool in a few hours and I'll search more.
try pulling your battery for a few minutes and see if the reboot cyle stops that way, at least it might get into recovery or the rom.
Click to expand...
Click to collapse
I'm honestly not sure what my friend did, lol. She was just messing with it while it was, apparently, in recovery and it ended up rebooting and loading the rom. I, honestly, don't want to risk getting stuck in recovery anymore since taking out the battery for an hour didn't do anything... If I'm unable to get adb on using what I know from that video then I'll try booting into the bootloader. Like I said before, I'll report my status in a few hours. I really appreciate your help up to now!
EXTREMELY HAPPY UPDATE!!! (9/4/11 - 1:22 AM)
I was able to turn on ADB! I used what I learned from that video and how turning on ADB works on my HTC Hero to get it working and it's FINALLY ON! Now I can attempt to flash the recovery, kernel, and everything else in order to get it working! Thank you VERY much! I will let you know how everything turn out
Another Wonderful Update! (9/4/11 - 2:03 AM)
I have flashed the recovery.img (the Xionia CWMA one) and can see my screen in recovery! I haven't seen anything on my screen besides the LG splash screen so I'm overwhelmed with joy! I'm flashing a new ROM and the other stuff now!
Final Update! (9/4/11 - 2:09 AM)
2:05 AM - I see the rom's boot screen!
2:06 AM - I see the CM7 Mod boot screen!
2:08 AM - I see the UI on my screen and everything seems to be working! Thank you VERY much!
Quick question though... If I want to install a new ROM, do I need to flash the xionia anykernel one directly afterwards?
ah, excellent! glad it's working now.
you're the most persistent (and maybe technically apt) person I've helped with this so far.
I still think that using screencast was the best new idea I've seen yet.
yes, you'll need to flash the xionia kernel after flashing any rom or rom update.
roms come with their own kernel in the boot.img, and none of them currently out for the v have the video drivers from the newer sprint kernels.
right now, xionia kernel is the only thing that works.
and, you'll need to flash the key swap after changing roms, as well, but at least forgetting to do that won't take out your display.
now that you've got xionia recovery on your phone, it should be a lot easier next time.
Thank you for both the help and the compliment!
I don't like giving up when it's something I know I can do. I figured that if I was able to mount my SD card without being able to see the screen, I should be able to turn on USB Debugging as well. About the Android Screencast... I didn't actually think about it until it until I plugged in my phone while the screen was blank, ran "adb devices", and saw that my device was detected within recovery. I figured that I might as well give it a shot... and it worked.
Alright, that's what I figured. Hopefully someone realizes what's happening with refurbished Optimus V smartphones and ports the newer sprint kernels to the Optimus V. I feel like I got ripped-off though... I bought my phone "new" and got a refurbished one. I can't really do anything though, we're not technically supposed to be rooting our Virgin Mobile phones anyways, lol. I'll be sure to do that everytime now though. For now, I think I'm good with the Bumblebee rom.
Once again, thank you VERY much for your help! I know I would not have been able to fix my phone without your help.
EDIT:
Oh yeah, btw, if the Optimus V ever gets stuck in stock recovery, press the "back" button then "home" button to boot into the rom. Not sure why it works (I was never able to see the screen), but it worked.
There is a key combo!
First time caller long time listener... I bricked my own Optmus V with a bogus ROM. To boot into recovery without adb press (Home)+(Volume Down)+(Power) Now rocking CM7!
Hey all,
I’ve heard that the Rezound is impossible to brick, but all I can guess is that I managed to do the impossible.
I bought a used Rezound a month or so ago. The previous owner had already rooted it and upgraded it to ICS – I honestly wasn’t happy he did this and didn’t mention it in his listing; I just wanted a stock phone and didn’t want to mess with rooting. I didn’t know exactly what he had done to it, so my idea was to reflash it myself, so I knew exactly what was on the phone. Battery life and overheating had been a real problem with the phone, so I was suspecting he might have done something to cause it, so I wanted to rule that out before concluding it was a hardware issue.
ANYWAY – I used cwm, backed everything up, wiped the phone’s memory, then booted back into recovery mode to flash the new ROM. I was able to pick the new ROM and get the process started. It worked its way through the process, rebooted, then sat on the intro screen for-ever. No matter how long I let it sit, it would not complete the install. At that time, I was able to boot back into recovery mode, at which point I cleaned out all the data caches, wiped it as clean as I could, and then tried to repeat the install. Eventually, I used every option in recovery mode and nothing made a difference – I never managed to get the phone working again.
In my last effort, I left the phone on overnight, figuring I’d give it all the time I could to sort itself out, settle into the new ROM, etc. NOW, the battery is dead and the phone won’t charge it. If I remove the battery, put it back in, and plug it in, the charge light goes on for about 5 seconds and then turns back off. At this point, the phone is completely dead.
Do I have any options at this point? Or am I just pretty much SOL?
And no, I don’t know WTF I’m doing, clearly the main issue is probably typing on the keyboard right now. Any help is appreciated.
phermes1 said:
Hey all,
I’ve heard that the Rezound is impossible to brick, but all I can guess is that I managed to do the impossible.
I bought a used Rezound a month or so ago. The previous owner had already rooted it and upgraded it to ICS – I honestly wasn’t happy he did this and didn’t mention it in his listing; I just wanted a stock phone and didn’t want to mess with rooting. I didn’t know exactly what he had done to it, so my idea was to reflash it myself, so I knew exactly what was on the phone. Battery life and overheating had been a real problem with the phone, so I was suspecting he might have done something to cause it, so I wanted to rule that out before concluding it was a hardware issue.
ANYWAY – I used cwm, backed everything up, wiped the phone’s memory, then booted back into recovery mode to flash the new ROM. I was able to pick the new ROM and get the process started. It worked its way through the process, rebooted, then sat on the intro screen for-ever. No matter how long I let it sit, it would not complete the install. At that time, I was able to boot back into recovery mode, at which point I cleaned out all the data caches, wiped it as clean as I could, and then tried to repeat the install. Eventually, I used every option in recovery mode and nothing made a difference – I never managed to get the phone working again.
In my last effort, I left the phone on overnight, figuring I’d give it all the time I could to sort itself out, settle into the new ROM, etc. NOW, the battery is dead and the phone won’t charge it. If I remove the battery, put it back in, and plug it in, the charge light goes on for about 5 seconds and then turns back off. At this point, the phone is completely dead.
Do I have any options at this point? Or am I just pretty much SOL?
And no, I don’t know WTF I’m doing, clearly the main issue is probably typing on the keyboard right now. Any help is appreciated.
Click to expand...
Click to collapse
Well, not sure about the installation issues...but the reason the phone died is because you have CM recovery. Known issue .. probably a hundred threads just not recently because people have either switched or don't let their phone run down. Phone can't charge from CM recovery and you need to switch back to Amon Ra recovery. http://forum.xda-developers.com/showthread.php?t=1434532
Basically, pull battery and then replace and hold volume down and power at the same time to boot into bootloader. Plug phone into computer . Put Amon recovery img into the same folder containing fastboot. Then make sure phone is in fastbootUSB . http://forum.xda-developers.com/showthread.php?t=1339679&highlight=amon+ra
Latest is 3.15 .. so once it is placed in the right folder type fastboot flash recovery recovery-ra-vigor-3.15-gnm.img ... this will flash amon ra recovery.. then you can charge. Once charged then you can attempt to recover your rom.
Sounds like you need an external charger to get the battery a little juice. I never thought that it was possible for a battery to not be able to charge because it was super dead unit I saw it happen on a Thunderbolt. You could take the battery to Verizon and have them give it a quick charge, just to get you back on your feet or got to an electronics store and buy a charger (can always take it back). Get it to boot again then work it from there maybe flash the Stock or Leaked PH98IMG just to get back to working so you can breath again..
Getting yourself out of a jam is part of the learning curve in flashing phones.
Yep, known problem with CWM. Plug it in powered off for a long time. It might not seem like it is charging, but it is, very little.
What ROM did you flash?
Also need to know the firmware version.
Once you get into hboot, tell us what radios you have and what version of hboot. You have three options, 2.11, 2.21, and 2.25. Also tell us if it has S-On or S-Off.
All of this is crucial for us to help you get back to stock.
Great, thank you for the good info! I was about ready to toss the thing in the trash, but it sounds like there may be hope yet!
EmerikL said:
Yep, known problem with CWM. Plug it in powered off for a long time. It might not seem like it is charging, but it is, very little.
What ROM did you flash?
Also need to know the firmware version.
Once you get into hboot, tell us what radios you have and what version of hboot. You have three options, 2.11, 2.21, and 2.25. Also tell us if it has S-On or S-Off.
All of this is crucial for us to help you get back to stock.
Click to expand...
Click to collapse
I'll have to get back to you on all of that - I'm not entirely sure right now, and everything is at home. Pretty sure it was a Venasaur ROM.
I wish the mods would delete any and all links to CWM. These threads keep cropping up.
its possible you need to flash the ICS firmware patch as well and thats why its not booting
Sorry to hassle you guys with what has probably already been answered a few times. I did some searching – yes, I should have done a little more - and the results I found were all folks that had phones that would still power on to some degree. I didn’t find many where the phone was completely dead, and if I did the responses were generally, “You’re screwed, throw it out.” Issues with cwm really didn’t cross my mind, so I didn’t think to search on that.
Anyway, I appreciate the help. I’ll sit down tonight and see if I can’t figure this thing out.
It is likely that he is S-ON and if he had a sense 4 rom installed, the new rom won't boot.
To the OP, can you please tell us the hboot version # (2.xx) it is either 2.10, 2.11,2.21, or 2.25. Also tell us if it says S-ON or S-OFF and unlocked, locked, or relocked, or juponutbear in purple at the top.
Easiest way to brick it is to take out battery while flashing a hboot haha.
No worries about the question, we're glad to help (since you didn't post this in the Development section lol)
Anyway, as long as you are S-ON, it shouldn't be too bad of a process, just lengthy. First, you'll need the Android SDK so you can get Fastboot, etc, as well as all the HTC device drivers installed, and you'll need to flash Amon RA recovery over.
Amon RA can be found here:
http://forum.xda-developers.com/showpost.php?p=23781936&postcount=428
**Make sure the Recovery file is in .img format, not .zip or anything, and place in the same folder as Fastboot (which is located in the Android SDK folder).**
You'll need to pull the battery, plug the USB cable into the computer, plug into the phone, replace battery, and hold down 'Power' + 'Volume Down' until the screen flashes the HTC screen. (Not sure if that's the only order, but it works). This will take you into Fastboot.
Next, you'll need to open a command prompt and 'cd' to your folder with Fastboot in it. Type:
Code:
fastboot flash recovery recovery-ra-vigor-3.15-gnm.img
into the command prompt and hit enter. It should show on the command prompt a couple lines of time it took, etc. and when done you will have Amon RA recovery.
Now you will at least be able to charge your phone!! From the phone, you can select 'Bootloader' then 'Recovery' and you will boot into recovery, which will allow you to charge your battery. You can check the charge status of the battery while in recovery in one of the menus, can't remember which one. (Fun tip: you can use 'Home'/'Menu' to scroll up/down, 'Back' to go back and 'Search' to select, since the hardware buttons are so difficult to press)
Once you get the phone charged, you have a couple of options. Since you stated you wanted to go to stock, I'll explain the steps to get back to the state the phone shipped with.
Once you get a good charge, you will also need to re-lock the bootloader to go back to stock, which is also done in fastboot by typing:
Code:
fastboot oem lock
(Get to fastboot by Battery Pull>Battery Put Back>Power + Volume Down, all while connected to a computer, just like when doing the Recovery flash)
BACK TO STOCK::
You can do this one of two ways, either run the revert using a .zip, or as a .exe connected to your computer. Personally, (and I know I'll probably lose credibility here lol) I prefer the .zip method, although many swear by the 'True RUU' .exe method.
**Here's a little aside to get you so you can get all of these files onto your phone. There's an option in Amon RA that mounts as removable storage to your computer so you can transfer files. Select 'USB-MS toggle' and then select 'USB-MS Toggle SDCard'. Then you can transfer all the files you need before continuing.
First, download the stock "ruu" zip from here:
http://goo.im/stock/vigor/ruu/RUU_V..._1.12_9k_1.83_V_APT_release_221502_signed.zip
and you will need to rename it to PH98IMG.zip and it will need to be placed on the root of your SDCard, not in any folder. Then download the MainVer.zip from here:
http://forum.xda-developers.com/showpost.php?p=23169557&postcount=4\
which can be placed anywhere on the SDCard, but I would place it in the same place as the PH98IMG file for ease.
Once you have the PH98IMG file on the root of the SDCard, and have the MainVerLow zip there also, continue on.
To flash, go to the 'Flash zip' menu in recovery, and locate the setMainVerLow.zip. All this does is set the Main Version low, so hboot (or whatever) doesn't kick it back saying you can't downgrade. This flash will only take a second, and when complete, go back to the main Recovery menu.
It probably doesn't matter, but I would wipe data/factory reset again just to be safe. Do this by selecting 'Wipe' then 'Wipe ALL data/factory reset'. Once done, go back to the main Recovery screen.
Now you will want to reboot into bootloader, which I believe is under either 'Other' or 'Developer Options'
The phone will reboot, and book back into a screen similar to what you saw in fastboot. Some purple text will scroll saying stuff about looking for some file, and will find the one you just put on there and ask if you want to update now. Click the power button to confirm the update. It will show a progress bar on the side, as well as list the parts it has updated for you. It will get around halfway done or so and reboot itself, but DON'T TOUCH ANYTHING OR REMOVE THE BATTERY!!! lol it will reboot and finish the second half of the install. Once it's done, I think you need to hit 'Power' one more time to reboot, but once it does you will be rebooted and load up the completely stock ROM that originally shipped with the Rezound. Of course, from here you can go to the system update menu and update to the latest released OTA.
EDIT:: Just wanted to add, none of what I have written was developed/discovered/first-posted by me, it is the work of other, MUCH more intelligent people other than myself. So don't thank me for anything other than putting them all here lol
con247 said:
It is likely that he is S-ON and if he had a sense 4 rom installed, the new rom won't boot.
To the OP, can you please tell us the hboot version # (2.xx) it is either 2.10, 2.11,2.21, or 2.25. Also tell us if it says S-ON or S-OFF and unlocked, locked, or relocked, or juponutbear in purple at the top.
Click to expand...
Click to collapse
Will try to do that tonight.
I need to get it to power up first. I've had it plugged in at my desk all day and no luck so far. Let me get that taken care of and I'll go from there.
See if you can borrow a friends battery. A thunderbolt or my touch 4g slide battery will work too. You can also manually charge your battery by wiring a USB cable directly to it. Then you can get rid of the broken recovery and charge the battery fully.
good luck.. if you figure all this out you might like being rooted. i had several issues coming from an htc incredible to rezound the cwm was one.
Definitely get Amon Ra.
Sent from my ADR6425LVW
con247 said:
You can also manually charge your battery by wiring a USB cable directly to it. Then you can get rid of the broken recovery and charge the battery fully.
Click to expand...
Click to collapse
OK, that looks interesting. How do I do that?
EDIT - NEVER MIND - just found it.
phermes1 said:
OK, that looks interesting. How do I do that?
EDIT - NEVER MIND - just found it.
Click to expand...
Click to collapse
might be worth your while:
http://www.amazon.com/HTC-Thunderbo...ords=htc+thunderbolt+external+battery+charger
It doesn't charge very fast, but nice to have around.
Hopefully im not too late, but click my name and look at the threads that i have started. I used a ghetto IMO method to charge a dead droid x battery. You njeed a useless usb cable and a little time. Basically you strip the red and black wires and respectively touch them to the + and - leads on your battery. This will charge it relatively fast, you only need to hold it on the battery for a minute or so, just long enough.
But use this as a last plan method, i dont know how safe this is because the voltages may go in wrong or damage the battery, but to this day my droid x still works and i got it on the release week so its relatively old.
If you can, you should get a legit charger instead but if you want it done fast, give this a try or find another way. hope i helped but just make sure that if the battery heats up if you try this, you stop immediately. That could mean that the battery is about to explode or its breaking.
hope i helped, but if you want more help there is bound to be youtube videos on how to do this.
If you try this and something goes wrong its not my problem, but i have done this before and it should work.
Here is the link to the forum i made:
http://forum.xda-developers.com/showthread.php?t=1656547
Yakuzagang5 said:
No worries about the question, we're glad to help (since you didn't post this in the Development section lol)
Anyway, as long as you are S-ON, it shouldn't be too bad of a process, just lengthy. First, you'll need the Android SDK so you can get Fastboot, etc, as well as all the HTC device drivers installed, and you'll need to flash Amon RA recovery over.
Amon RA can be found here:
http://forum.xda-developers.com/showpost.php?p=23781936&postcount=428
**Make sure the Recovery file is in .img format, not .zip or anything, and place in the same folder as Fastboot (which is located in the Android SDK folder).**
You'll need to pull the battery, plug the USB cable into the computer, plug into the phone, replace battery, and hold down 'Power' + 'Volume Down' until the screen flashes the HTC screen. (Not sure if that's the only order, but it works). This will take you into Fastboot.
Next, you'll need to open a command prompt and 'cd' to your folder with Fastboot in it. Type:
Code:
fastboot flash recovery recovery-ra-vigor-3.15-gnm.img
into the command prompt and hit enter. It should show on the command prompt a couple lines of time it took, etc. and when done you will have Amon RA recovery.
Click to expand...
Click to collapse
Update on my efforts. The steps above are where I'm currently at - so I haven't gotten far.
I got the $5 charger as suggested, so my phone will power on and I can at least get to the bootloader screen.
For whatever reason, it will NOT power on if I follow the steps above. It won't power up when I have it plugged into the PC. I can only power it on with it unplugged. So, when I run through the command prompt to install Amon Ra, it seems to be unable to connect to the phone. It displays 'Waiting for device' and nothing ever happens. At this point, it looks like I have everything I need on the PC side, but the phone is too boogered up to communicate with it.
I'm trying the options to clear out the memory right now. The problem there is that it goes to the screen with the top hat and orange circular arrow, and just sits there forever. It never acknowledges that it's done clearing memory.