Hi. This is the first time I will root and flash a phone. Of course I can't use my phone during the process itself, but what about after I root? I am a busy person and most likely I won't be able to root then flash in the same day.
How long does the root process, and then the flash process, take about? Estimates?
After I root, I can take and receive calls and SMS right away right? No waiting to do other things first? How about after I flash? When I get done flashing, can I start to use my phone again?
I am just nervous that it will take so long and I have to go for a meeting or my boss or student needs to talk to me, etc...
Thanks, LGnationrc
After you root and/or flash ROM. Assuming you did a full wipe, you'll have to set the phone up.
Basically the touch the Android robot and sign in to your Google account.
Phone and SMS should work right after that.
Sent from my Transformer TF101 using Tapatalk
Just remember to backup your contacts or remember to sync it to Google Contacts before you start (go to sync in settings, choose your account and tap "Sync Contacts".
ok thanks guys. I can't find this "thanks" button but I give you guys one each!
I think I will just do a root first, before I get into flashing. Rooting seems easy and fast. I have everything really to go, I just want to read up and get more information before I dive in.
After I am all done, flashing too, I basically want a faster phone (no more lag!) and I want to be able to run skype (I can't with my LG Optimus X2) and I want to remove that stupid and loud shutter sound when i record once and for all. Maybe I can free up some battery life too. I only get about 10 days before she is shut off dead. I only have about 20 apps. Maybe I can remove all the build crap apps too.
When I finally have the time to do it, I will let you guys know how it went. And report any problems I have if any. Thanks, lgnationrc
Just to clarify, the rooting process itself will not change the usability of your phone afterward. Until you choose to flash a custom ROM you can run your device with it's stock ROM as long as you like. In my case, I used a clean rooting method (not a one-click method) and it took 10 minutes to complete. I did spend quite a bit of time reading up on the subject beforehand.
Sent from my HTC Vision using XDA App
Ditamae said:
Just to clarify, the rooting process itself will not change the usability of your phone afterward. Until you choose to flash a custom ROM you can run your device with it's stock ROM as long as you like. In my case, I used a clean rooting method (not a one-click method) and it took 10 minutes to complete. I did spend quite a bit of time reading up on the subject beforehand.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Ok, whats the difference between oneclick method and a "clean" root method? Why a "root" vs. a oneclick method?
That is fine. I just want to get the process started. As long as I can take this in steps and still be able to use the phone in between steps.
What is the percentage of chance that I brick my phone trying to do this?
Thanks, lgnationrc
lgnationrc said:
Ok, whats the difference between oneclick method and a "clean" root method? Why a "root" vs. a oneclick method?
That is fine. I just want to get the process started. As long as I can take this in steps and still be able to use the phone in between steps.
What is the percentage of chance that I brick my phone trying to do this?
Thanks, lgnationrc
Click to expand...
Click to collapse
Both are rooting methods. With some devices there are apps designed to root you at the click of a button. Sometimes this is great and sometimes it can cause problems. With my phone, HTC G2, I used a process that takes a tad bit longer, but I was able to see what was going on each step of the way. My point was simply that rooting doesn't usually take long at all. If you already have a good method in mind stick with it and don't let me confuse you. And all this said - I did use a program called z4root to root my old CLIQ and it worked great. If you do find a one click method just be sure to do your homework on it, and be sure it's not causing more harm than good.
And I can't give you a percentage in terms of bricking your phone. If I were you I would just read instructions, then re read, read the posts by other users... read as much as you can. If you don't understand something, do a Google search. And when you feel comfortable, go ahead and do it. Flashing a custom ROM is simple and really does breathe new life into your phone. Good luck.
Ditamae said:
Both are rooting methods. With some devices there are apps designed to root you at the click of a button......Flashing a custom ROM is simple and really does breathe new life into your phone. Good luck.
Click to expand...
Click to collapse
Good news. I rooted my LG last night. No problems, went fast. I will wait to flash a few weeks before I feel really comfortable and read as much as I can.
But one problem I have right now is, I can't delete the factory apps. I have Astro file manager and I try to delete facebook but I keep getting "Error deleting" message.
And I am trying to figure out how to remove that stupid shutter sound when I record video. I guess there is a law in Hong Kong (thats where I bought the phone) that before you record there has to be a loud shutter sound. Nothing works. I can't figure it out. Any ideas?
I also haven't backed my phone up yet. I have to get the software still.
lgnationrc said:
Good news. I rooted my LG last night. No problems, went fast. I will wait to flash a few weeks before I feel really comfortable and read as much as I can.
But one problem I have right now is, I can't delete the factory apps. I have Astro file manager and I try to delete facebook but I keep getting "Error deleting" message.
And I am trying to figure out how to remove that stupid shutter sound when I record video. I guess there is a law in Hong Kong (thats where I bought the phone) that before you record there has to be a loud shutter sound. Nothing works. I can't figure it out. Any ideas?
I also haven't backed my phone up yet. I have to get the software still.
Click to expand...
Click to collapse
You need a root enabled file manager. Try es file explorer from the market. You have to enable it in the settings.
Sent from my HTC Glacier using xda premium
lgnationrc said:
Good news. I rooted my LG last night. No problems, went fast. I will wait to flash a few weeks before I feel really comfortable and read as much as I can.
But one problem I have right now is, I can't delete the factory apps. I have Astro file manager and I try to delete facebook but I keep getting "Error deleting" message.
And I am trying to figure out how to remove that stupid shutter sound when I record video. I guess there is a law in Hong Kong (thats where I bought the phone) that before you record there has to be a loud shutter sound. Nothing works. I can't figure it out. Any ideas?
I also haven't backed my phone up yet. I have to get the software still.
Click to expand...
Click to collapse
First thing I would do is flash Clockworkmod recovery. This will allow you to create a backup (nandroid) of your device in its current state. This way, if any of the changes you might make cause unwanted side effects, you can always restore. If you download Rom Manager in the Market, it should contain the recovery for your device.
Astro will not allow you read/write access to the system. I would install ES File Explorer. It's a free file manager app on the Market, and it will allow you access to system files, where you'll be able to do things such as remove the shutter sound.
You have to be careful deleting system applications from your ROMs. Some are necessary. Facebook is not, obviously... but you're better off leaving the stock system apps alone and flashing a custom ROM where you'll have many more options. Also, FYI, Titanium Backup is useful for creating user app/data backups, and also in that is allows you to freeze apps which essentially makes them unavailable... however, they can also be easily restored (defrosted) if need be. Happy flashing.
Okay,
So, I finally upgraded from my old POS HTC TP2 and got a Samsung Siii, which so far is beyond description. However, being that I'm primarily a Windows Developer, and VERY used to the way windows operates, I am finding it rather difficult to adjust to system level configurations with the Android OS.
Like, in windows there's a Registry, which on the phone or on the computer if you know what you are doing you can configure manually and effect massive changes to the system. But I can't seem to find anything like that for the Android OS, which make some sense, but there are some things I'd like to change:
Screen real-estate.
So I go from this TP2 which had like a 2 inch screen, and 480x600 or something, to this SIII with a 4.6 inch screen and damn near double the resolution. but on my Tp2 I could see like 10-12 emails/texts listed, and with Cookie's Home Screen, I could have up to 25 apps on one screen.
Given Screen Dynamics, I should very simply be able to see 20 emails/texts on screen, and 60 apps, but like people who move from a 1280x1024 desktop to a 2048x1280, their resolution goes up, but they also increase the size of the icons and fonts so effectively their desktop real-estate hasn't changed. Working visual Studio (and most other editors not used for WYSIWYG documents like Word) my font size is like 7-8pt type on 1680x1050 resolution. I am not visually impaired here, so I can read small print on a big screen, yet I even with the smallest font setting the default applications and text are MASSIVE. I can see like 8 text conversations and 7 emails. When you browse to a website the size is tiny, and I can zoom to an appropriate level, which currently provides 10 times the amout of information than the default home and app screens provide. Instead of "Small,Medium,Large" etc, is there any low level configuration where I can define the icon/font DPI to say that true 7pt type is perfectly acceptable for me? Are there any Apps that do this?
Texts & Emails.
Not to say that I'm much of a nay-sayer, but do we have to have stupid little bubbles for my chat screen? I mean, simply list them out in text. It's called texting, not "comic book bubbling". the bubbles get in the way and I'd simply like to make them a simple line by line. Sure the emote icons can be drawn in, and with other graphics to indicate attachments and such, but can I turn off "bubble texting" and just so me a direct list. This (with the font changes) would allow me to follow two weeks worth of text history with any one contact instead of having to remember my bubbles are on the right theirs on the left. (of course a good starting point would be to be able to reverse that). Can any of this be done easily?
As for Email, well It was an "add on" to my old TP2, but I would like a simple one-click way to "Mark all as read". I do not use GMail nor ever will. I own two domain names and my emails come through there. So the GMail client is out. The default client, as aforementioned, only shows like 7 emails in either a categorized today,yesterday,etc view, or a conversation threaded view. I just want a list: Line 1: Sender and Date, Line 2: Subject. And a simple button to click at the top that says: Mark All Read. I shouldn't have to check each email and then mark read, and with the categories if any emails are already read, the option defaults to mark unread so I have to check, mark unread, check, and mark read to get them all. I have like 6 different email accounts, with multiple aliases, and I'm on many newsletters and other such things, so I get quite a few emails daily, but I don't always need to read them. So far i've looked around and haven't found much in the way of email applications that will do what I want, which Mozilla Thunderbird (and my old TP2) do quite readily.
Mostly, I'm looking for ways to truly manipulate this device to the max, so that I can truly treat it like a portable computer. I used my old tp2 (while it was functioning) is a primary universal communications device, and I know I will do the same with the SIII, but to make my experience more enjoyable I need some starting points to determine if I can easily configure this thing to work my way. (Nah, i'm not a control freak, )
Thanks
Jaeden "Sifo Dyas" al'Raec Ruiner
There is a way to make everything smaller. There is a build.prop file. If you open it You should be able to find line like lcddensity (just look for lcd or density). Default is 240 but if You make it smaller everything will be smaller. Also You can have more icons on Your laincher when You're using better launcher. I'm using adw launcher ex and it has this option. Also the sms bubble thing. Take a look for "go sms pro" on android market. It has plenty of options
Sent from my X10i using xda app-developers app
Thanks for the pointers. So i need a different launcher, and the sms/email apps to solve my other problems. Great.
As for the "build.prop" file. Is that something that I will have to use the sdk and like rebuild the OS (basically, "root" the phone)?
Thanks
J"SD"a'RR
JaedenRuiner said:
Thanks for the pointers. So i need a different launcher, and the sms/email apps to solve my other problems. Great.
As for the "build.prop" file. Is that something that I will have to use the sdk and like rebuild the OS (basically, "root" the phone)?
Thanks
J"SD"a'RR
Click to expand...
Click to collapse
Yeah root is required. If You have that You can just open it as normal *.txt file. Root Explorer is best for doing it
Sent from my X10i using xda app-developers app
JaedenRuiner said:
Thanks for the pointers. So i need a different launcher, and the sms/email apps to solve my other problems. Great.
As for the "build.prop" file. Is that something that I will have to use the sdk and like rebuild the OS (basically, "root" the phone)?
Thanks
J"SD"a'RR
Click to expand...
Click to collapse
root would be required, but in most cases, you don't have to start from scratch to gain root, only if you flash a new or custom rom, so, no rebuilding the OS in most cases. the build.prop tweaks and custom launchers are a great start, but you might want to research the custom recovery for your device, so that you can make a nandroid backup, and restore in the event that you change something that causes issues that you can't fix..it's a good precaiution at any rate if you plan on doing a lot of poking around.,
jakuburban said:
Yeah root is required. If You have that You can just open it as normal *.txt file. Root Explorer is best for doing it
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
yea, great. this is effing priceless. So I root the phone. I get a build.prop editor, I change the lcd density so I can get more info on screen and what happens. TouchWiz has stopped working.
Home doesn't work, nothing works. the phone is as useless as a paperclip as a paperweight. even better, the kies install still works only a 3rd the time (at best) so plugging it in via usb i can't even access the device. There appears to be no key combo command to tell the thing to use its internal flash recovery to restore factory defaults, and I can't access the build.prop file from my computer in order to change the file back to its original settings.
very helpful, i must say, winmo6.5 may have sucked, but it worked. this android crap really is NOT user friendly.
As a programmer I believe in "ultimate user customization". and yet I either have to suffer under google bird brained ideas of how things will work, or have a different phone. the very fact that I cannot just RESET TO FACTORY DEFAULT. albiet that woudl suck too, but so far it's all about this ODIN crap. why isn't the factory ROM on the phone itself? all i did was root it and edit one file. if that breaks android so easily, it really needs to be taken back to the drawing board.
[EDIT]
And now I've found the way to get to the factory restore...but it doesn't effing restore. cause I'm still getting the same error after the restore. at least my POS HTC tP2 when i RESTORED it, it flashed EVERYTHING back to factory defaults, including the system files I changed. I now have a brand new SIII that is worthless.
Jaeden "Sifo Dyas" al'Raec Ruiner.
Have a bit of patience with yourself mate. I too came from WM (Touch Diamond, Touch HD and then a HD2) and I'm a Windows developer by profession, so Android was completely alien to me. The Linux crowd are sorted but we've got a steep learning curve ahead of us
All you've told us about your current problem is that "nothing works". Can you tell us what actually happens when you turn the phone on? Is it booting okay and getting to where you'd expect to see a home screen?
JaedenRuiner said:
yea, great. this is effing priceless. So I root the phone. I get a build.prop editor, I change the lcd density so I can get more info on screen and what happens. TouchWiz has stopped working.
Home doesn't work, nothing works. the phone is as useless as a paperclip as a paperweight. even better, the kies install still works only a 3rd the time (at best) so plugging it in via usb i can't even access the device. There appears to be no key combo command to tell the thing to use its internal flash recovery to restore factory defaults, and I can't access the build.prop file from my computer in order to change the file back to its original settings.
very helpful, i must say, winmo6.5 may have sucked, but it worked. this android crap really is NOT user friendly.
As a programmer I believe in "ultimate user customization". and yet I either have to suffer under google bird brained ideas of how things will work, or have a different phone. the very fact that I cannot just RESET TO FACTORY DEFAULT. albiet that woudl suck too, but so far it's all about this ODIN crap. why isn't the factory ROM on the phone itself? all i did was root it and edit one file. if that breaks android so easily, it really needs to be taken back to the drawing board.
[EDIT]
And now I've found the way to get to the factory restore...but it doesn't effing restore. cause I'm still getting the same error after the restore. at least my POS HTC tP2 when i RESTORED it, it flashed EVERYTHING back to factory defaults, including the system files I changed. I now have a brand new SIII that is worthless.
Jaeden "Sifo Dyas" al'Raec Ruiner.
Click to expand...
Click to collapse
How much did You change the value? Some of the apps(very few) don't support even a small change, and if You changed it like about 30+ then launchers may have problems.(in this case it has). You can copy files from & to phone using adb commands, even when You can't do anything. You can install e.g. ADW Launcher (program in my description does that) that should work and would bring Your phone back to life. There is also other way to repair it, but I hope You made a backup (this is "must to do" thing if You change sth. in ROM, especially when somebody is a noob and doesn't know a way how to repair it) , or just a backup of build.prop (50% chances that it will work).
Making factory reset won't help. Samsung Kies was always a crappy thing and never worked. Try odin to reflash ROM (if You didn't make a backup). And one important thing. Is it a custom ROM, do You have flashable package somewhere on the pc or phone? If so don't use ODIN yet. And send me this ROM. (is this *.zip file, not *.img?) There is a chance to restore build.prop.
PS. I understand You have usb debugging enabled?
Archer said:
Have a bit of patience with yourself mate. I too came from WM (Touch Diamond, Touch HD and then a HD2) and I'm a Windows developer by profession, so Android was completely alien to me. The Linux crowd are sorted but we've got a steep learning curve ahead of us
All you've told us about your current problem is that "nothing works". Can you tell us what actually happens when you turn the phone on? Is it booting okay and getting to where you'd expect to see a home screen?
Click to expand...
Click to collapse
After i changed the lcd_density, it rebooted and came to my lock screen. everything was smaller as I hoped, so i began punching in my PIN. then a small dialog popped up saying TouchWiz UI had stopped. I hit okay, and figured the lcd density I had chosen must be incompatible. So I pressed OK, figuring I would jump back in and change it back. I typed in the PIN and hit OK. My home screen background game up, but the bottom App row (5 icons) wasn't there. another dialog about the TouchWiz UI popped up. I pressed OK. Then a dialog saying System UI had failed. after 4 or 5 dialogs I could no longer press the OK button, like it either wouldn't recognize my touch or was "disabled" or something. so I tried to reboot the phone (holding the power button in to get to the reboot menu). It rebooted with the exact same behavior. Knowing that the phone was rooted I let it reboot, and tried plugging it back into my PC.
Now, even before I did all the advanced changes, when plugged into the computer, the SPH-L710 node in explorer only comes up a quarter of the time, so now, i plugged in and unplugged until the node appeared to allow me to explore the phone, figuring it is "rooted" now so I should be able to get to the build.prop file some how and change it. No such luck.
I played with the button presses hoping to find some soft-key combination that would "restore factory defaults". Took some intuitive leaps, and remembered power+VolDn+home lead me to download mode. and that when rebooting the guide had told me to use power+volup+home to get to "recovery". so I tried that, which lead me to the "Stock Recovery Mode" screen. (rather different than the ClockworkMod Recovery I used to root the device).
At this point I selected the third option, "wipe data/restore factory settings". (yes, I had backed up the device before i performed all this so I'm not "worried" just annoyed). the phone when through the process and claimed the restore was complete so in the menu I selected to reboot and it popped back up asking all the same initial questions it had when it was first turned on. thinking "yea" i'd solved the issue, it booted in asking for my name and yadda, yadda, yadda, when suddenly the SAME TouchWiz UI error pops up. again. skipping over the initial configuration stuff, it got to the psuedo lock screen, saying slide to unlock, and i see 4 icons at the bottom (not 5) and again the TouchWiz UI and System UI errors pop up repeatedly. I can't select any of the icons at the bottom, and I am now without a phone untill I can simply alter 3 characters in a text file, which I can't get to.
I get the learning curve and all, but if this build.prop file is so critical, factory reset should reset it too. it apparently does not, and so until i can somehow alter that file to set the lcd density back to 320 i'm screwed.
J"SD"a'RR
jakuburban said:
You can copy files from & to phone using adb commands, even when You can't do anything.
Click to expand...
Click to collapse
well first step is finding ADB. I downloaded the SDK but couldn't find adb anywhere in the sdk tree. once I do find it, using it will be amusing to say the least.
jakuburban said:
There is also other way to repair it, but I hope You made a backup
Click to expand...
Click to collapse
Of course i backed up the phone with my data. But unless I get it to boot in the standard home screen with the applications I can't restore the data.
jakuburban said:
or just a backup of build.prop (50% chances that it will work).
Click to expand...
Click to collapse
what purpose would this serve. the build.prop editor I used made a backup, but again untill i can get into the phone I can't restore this backup.
jakuburban said:
Making factory reset won't help.
Click to expand...
Click to collapse
which in mymind (as a developer) this is a bad design. any 'breaking' change should be repairable by a factory reset.
jakuburban said:
Samsung Kies was always a crappy thing and never worked.
Click to expand...
Click to collapse
needed it for the usb drivers, that's all.
jakuburban said:
Try odin to reflash ROM (if You didn't make a backup).
And one important thing. Is it a custom ROM, do You have flashable package somewhere on the pc or phone?
Click to expand...
Click to collapse
not custom rom or anything. I've had the phone for a week and was finally getting tired of not having certain things the way I wanted them. so I'd figured I'd dig around. I found many tutorials on the rooting of this phone and since they were all very similar I went with this one:
How to Root SPHL710
that part wen off just fine. seemed there was nothing for me to worry about. there was no ROM or crazy changes, just wanted to give myself root access. I then wanted to change LCD density, so I tried it and here I am.
jakuburban said:
PS. I understand You have usb debugging enabled?
Click to expand...
Click to collapse
it wasn't essential for what I was doing at the time. ODIN worked for the root process. *shrug* can't change it now, so I hope it isn't necessary.
J"SD"a''
JaedenRuiner said:
well first step is finding ADB. I downloaded the SDK but couldn't find adb anywhere in the sdk tree. once I do find it, using it will be amusing to say the least.
Of course i backed up the phone with my data. But unless I get it to boot in the standard home screen with the applications I can't restore the data.
what purpose would this serve. the build.prop editor I used made a backup, but again untill i can get into the phone I can't restore this backup.
which in mymind (as a developer) this is a bad design. any 'breaking' change should be repairable by a factory reset.
needed it for the usb drivers, that's all.
not custom rom or anything. I've had the phone for a week and was finally getting tired of not having certain things the way I wanted them. so I'd figured I'd dig around. I found many tutorials on the rooting of this phone and since they were all very similar I went with this one:
How to Root SPHL710
that part wen off just fine. seemed there was nothing for me to worry about. there was no ROM or crazy changes, just wanted to give myself root access. I then wanted to change LCD density, so I tried it and here I am.
it wasn't essential for what I was doing at the time. ODIN worked for the root process. *shrug* can't change it now, so I hope it isn't necessary.
J"SD"a''
Click to expand...
Click to collapse
So I see that You made a backup with some app (Titanium Backup?), not CWM or (whatever You have) recovery. That's crappy. (My bad, I could have told You about that)
Enabling usb debugging now is impossible so I think, all that's left to reflash with Odin. All the hope was in adb controlling, which REQUIRES usb debugging.
Sent from my X10i using xda app-developers app
jakuburban said:
So I see that You made a backup with some app (Titanium Backup?), not CWM or (whatever You have) recovery. That's crappy. (My bad, I could have told You about that)
Enabling usb debugging now is impossible so I think, all that's left to reflash with Odin. All the hope was in adb controlling, which REQUIRES usb debugging.
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
yea, I pretty much made that call yesterday, as all the ADB struff I tried didn't work. (but it was worth while for the learning process). I flashed with stock rom, and now i'm up and running. (guess I won't be messing with that setting again. ) as it is, i'm trying different launchers which has some of the features I want, and then I'll keep looking for different email/sms apps that shrink the info. (seriously on this size/res of screen, only seeing 8 emails is pathetic).
basically now trying the Apex Launcher, and then I'll do the ADW launcher. which ever is more to my liking i'll go pro. then handcent or gosms, k9 or others, or perhaps i'll even start writing my own clients that include font setting micro, .
thanks though, at least my first attempt to alter the phone is no different than my first attempt to write a program.
Cheers,
Jaeden "Sifo Dyas" al'Reac Ruiner
JaedenRuiner said:
yea, I pretty much made that call yesterday, as all the ADB struff I tried didn't work. (but it was worth while for the learning process). I flashed with stock rom, and now i'm up and running. (guess I won't be messing with that setting again. ) as it is, i'm trying different launchers which has some of the features I want, and then I'll keep looking for different email/sms apps that shrink the info. (seriously on this size/res of screen, only seeing 8 emails is pathetic).
basically now trying the Apex Launcher, and then I'll do the ADW launcher. which ever is more to my liking i'll go pro. then handcent or gosms, k9 or others, or perhaps i'll even start writing my own clients that include font setting micro, .
thanks though, at least my first attempt to alter the phone is no different than my first attempt to write a program.
Cheers,
Jaeden "Sifo Dyas" al'Reac Ruiner
Click to expand...
Click to collapse
I'm glad to hear that Before messing with the system ALWAYS make a CWM backup, not some app backup (like titanuim backup).
PS. I use ADW Launcher EX. It's the best for me. Tried other but this one is the best.
Hi. I recently deblurred my phone using Lokifish's deblur script. It worked great and I'm loving it. Only one problem. After an hour or two of use, I notice that the icon for the ringer toggle disappears (only the on icon, the silent icon remains). The toggle works fine, but I'd like to not have a missing icon.
The first time this happened I thought it was my fault, because I removed all the icon png files that were showing up in my library. However, after restoring a nandroid backup, the icon disappeared again over time. I even tried restoring a stock backup (nandroid backup of stock photon after 2.3.5 OTA update) and going through the whole process of running the script again. Same result.
During the first hour or two of use after deblur, I'm generally going back and installing all my apps again, adding widgets, getting settings back the way I like them, and so fourth. So, I think it has something to do with one or more of these tasks.
I'm just wondering if Lokifish can help me in getting the icon back. I'm posting here, because I'm too new to post a reply in the deblur thread since it's in the developer forum. Please let me know. Thanks.
You are never too new to reply or ask on the thread of the developed thing you have problem with. You should only avoid posting new threads on the developer section, unless you developed or found something and want to share it.
About your problem: Sorry, I'm not an expert yet, and I have no idea.
yairku said:
You are never too new to reply or ask on the thread of the developed thing you have problem with. You should only avoid posting new threads on the developer section, unless you developed or found something and want to share it.
About your problem: Sorry, I'm not an expert yet, and I have no idea.
Click to expand...
Click to collapse
Thanks, I appreciate your reply. Unfortunately, when I try to post a reply to a thread in the developer forum, I get the following error:
p0wder2, you do not have permission to access this page. This could be due to one of several reasons:
The reason below that line that I think most applies to myself is the following:
New members (those with fewer than 10 posts) are not permitted to post to development-related forums.
This is why I have made the determination that I am "too new" to post. If this is inaccurate, please let me know, as I would love to be able to post a reply in the Deblur thread regarding the issue I experienced.
Thanks again.
I'm facing the same issue related to toggle icon. Finally I've to factory reset twice to get my icon back... lol
Sent from Motorola Photon 4G via Reliance
Sorry, my mistake. It's normal that you're unable to reply on the developer forus, just as you said. You can try to do what matrix says, factory reset twice. Then try to restore data using advanced restore within recovery mode.
Sent from my MB855 using xda app-developers app
Thanks, but I actually have a nandroid backup of the "deblurred" stock ROM. When restoring from that backup, the icon is there for a while and then it isn't. I also reverted to the stock 2.3.5 ROM, without the deblur, and when I went through the whole process again, the same thing happened. Icon is there for a while, then it isn't. I need a way of getting it back without any resets or restoring from backups. If not, I can live without it
Thanks again though. I appreciate the suggestions, they are just ones I've already tried.
I'm able to reply on the script's thread, so I posted for you.
It's right here
I'm sorry for writing "he or she", I just don't know you.
Anyway, I am a male.
Good day!
Cool!
yairku said:
I'm able to reply on the script's thread, so I posted for you.
It's right here
I'm sorry for writing "he or she", I just don't know you.
Anyway, I am a male.
Good day!
Click to expand...
Click to collapse
Awesome, thank you so much!
You're most welcome!
Even if you reinstall it, you won't get your icon back... this is something related to application and memory problem... when I restored my backup, same issue again... didn't find any solution except installing lesser apps...
In my case some go application is causing a problem...
Sent from Motorola Photon 4G via Reliance
matriX1218 said:
Even if you reinstall it, you won't get your icon back... this is something related to application and memory problem... when I restored my backup, same issue again... didn't find any solution except installing lesser apps...
In my case some go application is causing a problem...
Sent from Motorola Photon 4G via Reliance
Click to expand...
Click to collapse
Interesting. Well, I figured it had to do with adding apps since that's the first thing I do after the deblur process is completed. However, I'm thinking there may be a way of forcing ADW to reload it, but I'm not nearly familiar enough with linux (or the ADW launcher for that matter) to figure that out on my own.
Oh well, as I said before, I can live without it if needs be. I'd rather have all the apps that are currently installed than the ringer icon. Thanks for confirming my suspicions, though.