Related
Thread OBSOLETE:
Go here for update:
http://forum.xda-developers.com/showthread.php?t=1939783
arcatarc said:
hi all,as you know Qualcomm released a new updated driver for ICS...original post: http://forum.xda-developers.com/showthread.php?t=1550185
But the problem is that the original package causes a problem with camera preview.
I managed to resolve(?)this by using the original eglsubAndroid.so.
So..here you are,the NewAdrenoICS.zip is the originalupdate,NewAdrenoICSSony.zip is the modded one.
1 make a nandroid backup
2 install the .zip
3 feedback are wellcome
Click to expand...
Click to collapse
Nice update there But umm, before i use this, is there a bug still inside? krabappel was using it for KA07 ROM and he said there was a bug when playing the video. Can you confirm that? And please upload the stock flashable zip please, in case something goes wrong Thanks mate.
hansip87 said:
Nice update there But umm, before i use this, is there a bug still inside? krabappel was using it for KA07 ROM and he said there was a bug when playing the video. Can you confirm that? And please upload the stock flashable zip please, in case something goes wrong Thanks mate.
Click to expand...
Click to collapse
No,i've no problem with video player,for the stock flashable i'll make it in a moment...
Edit:1st post updated..
I don't know if there's any placebo effect, but it seems the ICS transition is smoother thx arcatarc!
hansip87 said:
I don't know if there's any placebo effect, but it seems the ICS transition is smoother thx arcatarc!
Click to expand...
Click to collapse
I've noticed that too...
Tnx to you for your wonderful work
Which should we install? The NewAdrenoICS.zip or the NewAdrenoICSSony.zip?
idareyoutoclickthis said:
Which should we install? The NewAdrenoICS.zip or the NewAdrenoICSSony.zip?
Click to expand...
Click to collapse
NewAdrenoICSSony.zip.
NewAdrenoICS.zip is for test because have problem with camera preview.
Well flashed this to an arc. And like other posts. It does feel alot for responsive and zippy.
Sent from my LT18i using xda premium
Window animations are definitely better and smoother...
Antutu scores show slightly better scores inn 2D... 3D scores remain the same...
Thanks ... Great job...
Again:i don't know if is a placebo effect but Browser seem more smoother and faster...
arcatarc said:
Again:i don't know if is a placebo effect but Browser seem more smoother and faster...
Click to expand...
Click to collapse
It s not placebo xperia s 3d word wallpaper working perfectly thanks
this results i test after install adreno driver.
fps average - 72 using fps test.apk
3D average - 654 using quadrant
fyi
cpu max freq - 806mhz
cpu min freq - 122mhz
gov - ondemand
I/O - noop
btw .. thanks for the driver
Yep, it improves smoothness, especially in particular apps, like RootExplorer, where touchscreen responsivness is awesome, super fast!
@arcatarcc
You should post these drivers in Arc/Arc and Neo/NeoV Dev sections too... Arc/ARC-S/Neo users of my Hybrid ROM gave a positive feedback of its working and improvement...
jjdoctor said:
@arcatarcc
You should post these drivers in Arc/Arc and Neo/NeoV Dev sections too... Arc/ARC-S/Neo users of my Hybrid ROM gave a positive feedback of its working and improvement...
Click to expand...
Click to collapse
I'm glad to share my work with all the xperia comunity,in particular with great developer like you,so if you want you can do it for me..
Only a request:just add a link to unicef as in my signature.
Tnx mate!
Sent from my ST18i using XDA App
Nice work there
Finally I can use with no problems
Thanks many
@JJ how much your fps score using this tools? my results above after ive did something with my fps. if your score below than mine than i'll include that tweak into kernel.
Great work , Thank you very much
Sirkay, whoa your avg fps test is high. I can only achieve 64fps max with stock ics beta. :/ wonder why. Can I look into your build.prop?
sent from my white ray using XDA App
here my build.prop
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Mon Feb 20 13:22:51 2012
ro.build.date.utc=1329740571
ro.build.user=sirkay
ro.build.host=iPwnd
##### Final patch of properties #####
ro.build.product=ST18i
ro.build.description=LT18i-user 4.0.3 4.1.C.0.7 -H9_3w test-keys
ro.product.brand=SEMC
ro.product.name=ST18i_0000-0000
ro.product.device=ST18i
ro.build.tags=release-keys
ro.build.fingerprint=SEMC/ST18i_0000-0000/ST18i18i:4.0.3/4.1.C.0.7/-H9_3w:user/release-keys
ro.config.ringtone=sony_ericsson.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.semc.content.number=PA3
################# Updating of the SW Version #################
ro.semc.version.fs_revision=4.1.C.0.7
ro.build.id=4.1.C.0.7
ro.build.display.id=Hybrid-ROM-v2
##### Values from product package metadata #####
ro.semc.product.model=R800i
ro.semc.ms_type_id=AAD-3880097-AV
ro.semc.version.fs=WORLD-i
ro.semc.product.name=Xperia Ray
ro.semc.product.device=ST18i
ro.product.model=ST18i
# begin build properties
# autogenerated by buildinfo.sh
ro.build.version.incremental=-H9_3w
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.type=user
ro.product.board=
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony Ericsson
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=13
ro.board.platform=msm7x30
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
# end build properties
#
# system.prop for urushi
#
# Notify the system that the RIL only signals once
ro.telephony.call_ring.multiple=false
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
wifi.interface = wlan0
ro.semc.wifi.hostapd=1
ro.semc.timescape_keys=Sony_Ericsson_Xperia
ro.semc.sols.product-code=95
ro.semc.sols.company-code=5
persist.ro.ril.sms_sync_sending=1
ro.use_data_netmgrd=true
# Disable strict mode checking
persist.android.strictmode=0
# Constant values for Battery test in Service menu
ro.semc.batt.capacity=1500
ro.semc.batt.test.z_threshold=50
ro.semc.batt.test.min_level=70
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
#Default values/Locales for the hiding languages feature
ro.product.locale.excluded=ar_EG ar_IL fa_IR iw_IL
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-sonyericsson
drm.service.enabled=true
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.semc.xloud.supported=true
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
ro.usb.pid_suffix=14F
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.drm.active.num=4
ro.drm.active.0=semc,1
ro.drm.active.1=cmla,0
ro.drm.active.2=viaccess,0
ro.drm.active.3=marlin,1
persist.rildenabled=1
persist.wifienabled=1
persist.btenabled=1
#Network Tweaks
net.tcp.buffersize.default=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.wifi=87380,1048576,2097152,87380,1048576,2097152
net.tcp.buffersize.lte=87380,524288,1048576,87380,524288,1048576
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.umts=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.gprs=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.edge=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
#
# Extra
#
ro.HOME_APP_ADJ=1
ro.ril.disable.collapse=0
Debug.performance.tuning=1
ro.opengles.version=131072
pm.sleep_mode=1
ro.kernel.android.checkjni=0
debug.sf.hw=1
video.accelerate.hw=1
persist.chargemon.active=1
windowsmgr.max_events_per_sec=150
debug.enabletr=true
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
com.qc.hardware=true
ro.max.fling_velocity=4000
ro.mot.eri.losalert.delay=1000
mot.proximity.delay=25
ro.lge.proximity.delay=25
net.dns1=8.8.8.8
net.dns2=8.8.4.4
ro.config.nocheckin=1
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.hsupa.category=6
ro.telephony.default_network=0
#net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
#net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
#net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
#net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
#net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
ro.media.capture.maxres=8m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.capture.flash=led
ro.media.capture.torchIntensity=40
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
wifi.supplicant_scan_interval=150
dalvik.vm.execution-mode=int:jit
dalvik.vm.checkjni=false
ro.opengles.version=131072
ro.compcache.default=0
WIND WIND.zip for 1.46.1500.3 (WIND users only!)
T-Mobile TMOB.zip for 1.43.531.3 (T-Mobile users only!)
Bullet Proof BP.zip for Bullet Proof ROM
FAQ:
------------------------------------------------------------
Can I flash this via recovery? No, extract the build.prop and push it to system and set to 644
Why do I see no data speed increase? This only unlocks the full HSPA+ performances on the phone, actual speed is still limited to the provider's cellphone tower types
To use this, rename your current build.prop and past the one in the zip to system, change the permissions to 644 and reboot.
Change log: 04/14/2012:
removed hep option (I think this is killing battery, not sure)
added modified Bullet Proof version of build.prop, should be ok for the mail problem
Change log: 04/05/2012:
added T-Mobile version
re-enabled ro.ril.disable.power.collapse
removed the default home operator stuff (did not make a difference)
ro.telephony.default_network set to 2 so the network type setting sticks (only on wind version)
added ro.ril.hep = 1
added ro.kernel.android.checkjni=0
added pm.sleep_mode=1
added windowsmgr.max_events_per_sec=150
added video.accelerate.hw=1
added debug.performance.tuning=1
Change log: 04/03/2012:
Added to default to home operator "WIND Home" and the numeric IDs for gsm and cdma configs
WiFi Scan interval to 300s (save battery)
heapsize to 128MB
debug.composition.type from c2d to gpu (home screen seems to be much smoother)
Tweaked the HSPA configs (I can't see much change, probably because I am far in the boonies)
Enabled "Dual Transfer Mode"
Enabled ro.ril.enable.sdr (unsure what it is, but just testing it)
Post your test results, recommendations etc.
Can you tweak the tmobile one also?
Not sure about wind, but tmobileUS has (the top 4 lines in screenshot),.when edited, increase data speeds... Mine should be edited already, but as I looked at them while uploading, those numbers look stock (may explain my 15 mb/s speed vs my 25 mb/s speed )... I will have to doube check.
Also, any way to edit this to completely kill the capacitive lights so they won't come on after reboot?
Sent from my HTC_Amaze_4G using Tapatalk 2 Beta-5
glacierguy said:
Can you tweak the tmobile one also?
Not sure about wind, but tmobileUS has (the top 4 lines in screenshot),.when edited, increase data speeds... Mine should be edited already, but as I looked at them while uploading, those numbers look stock (may explain my 15 mb/s speed vs my 25 mb/s speed )... I will have to doube check.
Also, any way to edit this to completely kill the capacitive lights so they won't come on after reboot?
Sent from my HTC_Amaze_4G using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
I would prefer to work directly from a stock one (need to source one some how). And no, this will not be able to disable the button lights, you need to do them in the init.post_boot.sh file under etc
Can someone provide a completely unmodified build.prop?
Mine is stock... I verified with the modified build prop faster speeds thread...
http://db.tt/MlsimcFo
Also... That's not stock stock... I haven't edited it, but I am on a Rooted Rom... Idk if NRGZ made any changes in his ROM
Thanks
PS... Here's the thread with some build.prop edit suggestions for faster data speeds. I can confirm it works.
http://forum.xda-developers.com/showthread.php?t=1489046
Build.prop faster data speeds [Solved]
Sent from my HTC_Amaze_4G using Tapatalk 2 Beta-5
glacierguy said:
Mine is stock... I verified with the modified build prop faster speeds thread...
http://db.tt/MlsimcFo
Also... That's not stock stock... I haven't edited it, but I am on a Rooted Rom... Idk if NRGZ made any changes in his ROM
Thanks
PS... Here's the thread with some build.prop edit suggestions for faster data speeds. I can confirm it works.
http://forum.xda-developers.com/showthread.php?t=1489046
Build.prop faster data speeds [Solved]
Sent from my HTC_Amaze_4G using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Yours is definitely modified, I see that it has custom names in the namespaces at the bottom.
I did put those values in the build prop, but I dont see much changes on my side. then again, it is probably my provider or my location
How are speeds on this?? I usually get awful speeds from WIND in my neighbourhood, wondering if this'll fix that.
Sent from my HTC Amaze 4G using xda premium
rbaruch said:
How are speeds on this?? I usually get awful speeds from WIND in my neighbourhood, wondering if this'll fix that.
Sent from my HTC Amaze 4G using xda premium
Click to expand...
Click to collapse
This only sets to allow maximum speed the HSPA on Amaze 4G can support, so far, I have not seen any improvement, probably won't until WIND rolls out better HSPA or "4G"
morrislee said:
This only sets to allow maximum speed the HSPA on Amaze 4G can support, so far, I have not seen any improvement, probably won't until WIND rolls out better HSPA or "4G"
Click to expand...
Click to collapse
Same here. No change in data speeds at all :|
morrislee said:
I would prefer to work directly from a stock one (need to source one some how). And no, this will not be able to disable the button lights, you need to do them in the init.post_boot.sh file under etc
Can someone provide a completely unmodified build.prop?
Click to expand...
Click to collapse
Stock TMOUS build.prop from 1.43.531.3 OTA...
Code:
ro.ril.oem.ecclist=911
ro.ril.enable.a53=1
ro.ril.enable.dtm=0
ro.ril.gprsclass=10
ro.ril.hsdpa.category=24
ro.ril.hsupa.category=6
ro.ril.hsxpa=4
ro.ril.def.agps.mode=1
ro.ril.fast.dormancy.timeout=10
ro.ril.def.agps.feature=1
ro.ril.radio.svn=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420
ro.ril.enable.sdr=0
ro.ril.enable.gea3=0
ro.ril.enable.amr.wideband=0
ro.ril.set.mtusize=1440
ro.ril.rxd.mode.nv=11
ro.ril.bler.threshold.nv=125
ro.ril.rscp.threshold.nv=110
ro.ril.enable.rxd=1
ro.ril.oem.cnap=1
ro.ril.enable.r8fd=1
ro.ril.disable.cpc=1
ro.ril.ims=1
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-htc
ro.com.google.clientidbase.am=android-tmobile-us
ro.com.google.clientidbase.vs=android-hms-tmobile-us
ro.com.google.clientidbase.gmm=android-htc
ro.com.google.clientidbase.ms=android-hms-tmobile-us
ro.ril.vmail.310260=+18056377243
ro.phone.min_match=7
ro.ril.enable.ganlite=0
ro.product.model=HTC_Amaze_4G
ro.ril.def.agps.feature=1
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.customizationid=251013
ro.aa.project=Ruby
ro.aa.romver=1.43.531.3
ro.aa.maincid=T-MOB010
ro.aa.modelid=PH8511000
ro.aa.cidlist=T-MOB010
ro.aa.rid=201
ro.aa.taskid=228638
ro.aa.skulist=531
ro.aa.mainsku=531
ro.com.google.clientidbase=android-htc
ro.aa.customizationid=251013
ro.aa.project=Ruby
ro.aa.romver=1.43.531.3
ro.aa.maincid=T-MOB010
ro.aa.modelid=PH8511000
ro.aa.cidlist=T-MOB010
ro.aa.rid=201
ro.aa.taskid=228638
ro.aa.skulist=531
ro.aa.mainsku=531
ro.com.google.clientidbase=android-htc
ro.build.id=GRJ22
ro.build.display.id=GRJ22
ro.build.version.incremental=192596.3
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.4
ro.build.date=四 12月 1 02:56:31 CST 2011
ro.build.date.utc=1322679391
ro.build.type=user
ro.build.user=root
ro.build.host=ABM035
ro.build.tags=release-keys
ro.product.model=HTC Ruby
ro.product.brand=tmous
ro.product.name=htc_ruby
ro.product.device=ruby
ro.product.board=ruby
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=ruby
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.43.531.3 CL192596 release-keys
ro.build.description=1.43.531.3 CL192596 release-keys
ro.build.changelist=192596
ro.product.ua=
ro.build.fingerprint=tmous/htc_ruby/ruby:2.3.4/GRJ22/192596.3:user/release-keys
ro.build.project=Ruby:228638
ro.product.version=1.43.531.3
ro.build.languageremove=0
ro.build.sense.version=3.0
keyguard.no_require_sim=1
# end build properties
#
# system.prop for ruby
#
ro.sf.lcd_density=240
debug.fb.rgb565 = 0
debug.composition.type = c2d
#+HTC_RIL: from QCT Fusion
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.rild.ril.ltedr=0
persist.rild.ril.ltedrtable=max_retries=infinite,10000
DEVICE_PROVISIONED=1
#
# system props for the cne module
#
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=11
#
# system props for telephony modules
#
#device supports LTE
ro.config.lte=true
#device supports EHRPD
#ro.config.ehrpd=true
#device supports simultaneous 1x voice + LTE
#ro.config.svlte1x=true
#-HTC_RIL: from QCT Fusion
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
# pyramid RF team request
ro.ril.enable.dtm = 0
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 10
ro.ril.hsupa.category = 6
ro.ril.hsxpa = 3
# Default network type.
# 0 => WCDMA preferred.
ro.telephony.default_network=0
wifi.interface=tiwlan0
wifi.supplicant_scan_interval=15
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
# Change to 32m, due to 2.3.3 GB already change to 32m
dalvik.vm.heapsize=32m
# For the default value of agps
ro.ril.def.agps.mode = 2
# For HSDPA low throughput
ro.ril.disable.power.collapse = 1
# For Pyramid China NEL
ro.ril.enable.prl.recognition = 1
# For emmc phone storage
ro.phone_storage = 0
# For ext4 file system
ro.ext4fs = 1
# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl = http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN = http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN = http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url = http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN = http://fotamsg.htccomm.com.cn/android/extra/
ro.htc.appupdate.url = http://apu-chin.htc.com/check-in/rws/and-app/update
ro.htc.appupdate.url_CN = http://apu-chin.htccomm.com.cn/check-in/rws/and-app/update
ro.htc.appupdate.exmsg.url = http://apu-msg.htc.com/extra-msg/rws/and-app/msg
ro.htc.appupdate.exmsg.url_CN = http://apu-msg.htccomm.com.cn/extra-msg/rws/and-app/msg
# Release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4329-B1
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.0.50.032
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles = 4270339
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
# For quick boot mode
persist.sys.shutdown.mode = hibernate
# For opensense sdk
ro.htc.common.version = 2.0.0.0
# Following property will be reference by Settings.
ro.product.processor = 1.5 GHz dualcore
ro.product.ram = 1GB
ro.product.display_resolution = 4.3 inch qHD resolution
ro.product.main_camera = 8M
ro.product.front_camera = 2M
ro.product.bluetooth = 3.0
ro.product.wifi = 802.11 a/b/g/n
# Properties for supporting framework features
ro.htc.framework.screencapture = true
# support sdcard2
ro.sdcard2 = 1
# Extend key dispatching timeout
keydispatchtimeout = 15000
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.networklocation=1
ro.setupwizard.mode=DISABLED
ro.setupwizard.mode=OPTIONAL
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.setupwizard.mode=DISABLD
ro.com.google.gmsversion=2.3_r7
media.a1026.nsForVoiceRec=0
htc.audio.alt.enable=1
htc.audio.hac.enable=1
ro.setupwizard.enterprise_mode=1
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
New version is up and t-mobile one added. Always backup your current one just in case!
yo2boy said:
Same here. No change in data speeds at all :|
Click to expand...
Click to collapse
Prolly depends on your area. My neighborhood has awful service, yet when im in downtown toronto I get fast speeds.
rbaruch said:
Prolly depends on your area. My neighborhood has awful service, yet when im in downtown toronto I get fast speeds.
Click to expand...
Click to collapse
Do you see improvement before and after applying my build.prop in your downtown area? Or has it always been that way?
will the t-mobile one work for simple mobile?
---------- Post added at 10:50 PM ---------- Previous post was at 10:48 PM ----------
morrislee said:
And no, this will not be able to disable the button lights, you need to do them in the init.post_boot.sh file under etc
Click to expand...
Click to collapse
I apologize for thread jacking with this question, but what would you put in this file, I am asking here, rather than via PM because I think others might like to know... you could make a new thread if you prefer... thanks!
edit: ok did a little digging, would this work?
Code:
mount -o rw,remount /dev/block/mmcblk0p29 /system
chmod 777 /sys/devices/platform/leds-pm8058/leds/button-backlight/brightness
echo 0 > /sys/devices/platform/leds-pm8058/leds/button-backlight/brightness
chmod 444 /sys/devices/platform/leds-pm8058/leds/button-backlight/brightness
mount -o ro,remount /dev/block/mmcblk0p29 /system
edit2: confirmed, the above works, just edited the file (init.post_boot.sh) and adb pushed it, then rebooted... nice, no more bleed!
rbaruch said:
Prolly depends on your area. My neighborhood has awful service, yet when im in downtown toronto I get fast speeds.
Click to expand...
Click to collapse
Reception's always been better downtown, probably more/better towers or something
adslee said:
Reception's always been better downtown, probably more/better towers or something
Click to expand...
Click to collapse
Thanks I will try this out.
And for you Wind users, I am on the Energy ROM and I can't send MMS for some reason, keeps failing. Although the other day I did receive one from another Wind user, but missed them from Rogers customers.. My APN for MMS matches exactly what its supposed to be.
benjamminzIS said:
will the t-mobile one work for simple mobile?
Click to expand...
Click to collapse
I think my original question was missed because of the other things I asked [OT] in my post... anyone know the answer?
benjamminzIS said:
I think my original question was missed because of the other things I asked [OT] in my post... anyone know the answer?
Click to expand...
Click to collapse
It should, simple mobile runs on tmobiles network
The t-mobile one works very well for me. I went from a constant 18-20Mb to over 23Mb/s.
djdanska said:
The t-mobile one works very well for me. I went from a constant 18-20Mb to over 23Mb/s.
Click to expand...
Click to collapse
Nice speeds, but usually they are depended on traffic. Don't get your hopes up!
Hello all. I have Xperia Ray, when i downloading Hd game extra data my wifi starts dropping, so i cant download data. Any fix or ideas to solve my problem?
Sorry for bad English, Greetings from Lithuania.
audr3nux said:
Hello all. I have Xperia Ray, when i downloading Hd game extra data my wifi starts dropping, so i cant download data. Any fix or ideas to solve my problem?
Sorry for bad English, Greetings from Lithuania.
Click to expand...
Click to collapse
Power off the wi fi for 20 secs. Then put the device on as long as possible screen timeout. Put it very close to the router. On every 5 mins tap the screen from preventing it from sleep
try out "wifi fixer" from the market, it's free and very good.
MrTapa said:
Power off the wi fi for 20 secs. Then put the device on as long as possible screen timeout. Put it very close to the router. On every 5 mins tap the screen from preventing it from sleep
Click to expand...
Click to collapse
3ateef said:
try out "wifi fixer" from the market, it's free and very good.
Click to expand...
Click to collapse
Not helped ;/ my WIFI still auto disconnecting. Any ideas to fix? I tried wifi fixers from market no one fix.
What rom are you on? If you are rooted and have a root explorer installed can you pull a copy of your build.prop and post it for me to take a look at?
Sent from my Xperia ray using xda premium
sucker for sony's said:
What rom are you on? If you are rooted and have a root explorer installed can you pull a copy of your build.prop and post it for me to take a look at?
Sent from my Xperia ray using xda premium
Click to expand...
Click to collapse
Im using RayOnium.v7 Final, GB 2.3.4. My build.prop
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Wed Oct 19 09:31:26 2011
ro.build.date.utc=1319009486
ro.build.user=SEMCUser
ro.build.host=SEMCHost
##### Final patch of properties #####
ro.build.product=ST18i
ro.build.description=ST18i-user 2.3.4 4.0.2.A.0.62 wf_v3w test-keys
ro.product.brand=SEMC
ro.product.name=ST18i_1251-7710
ro.product.device=ST18i
ro.build.tags=release-keys
ro.build.fingerprint=SEMC/ST18i_1251-7710/ST18i:2.3.4/4.0.2.A.0.62/wf_v3w:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1251-7710
ro.semc.version.cust_revision=R11D
#########################################################################
ro.config.ringtone=sony_ericsson.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.semc.content.number=PA6
################# Updating of the SW Version #################
ro.semc.version.fs_revision=4.0.2.A.0.62
ro.build.id=4.0.2.A.0.62
ro.build.display.id=RayOnium.v7 Final
##### Values from product package metadata #####
ro.semc.product.model=ST18i
ro.semc.ms_type_id=AAD-3880119-BV
ro.semc.version.fs=WORLD-i
ro.semc.product.name=Xperia Ray
ro.semc.product.device=ST18
ro.product.model=ST18i
# begin build properties
# autogenerated by buildinfo.sh
ro.build.version.incremental=wf_v3w
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.4
ro.build.type=user
ro.product.board=
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony Ericsson
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7x30
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
# end build properties
#
# system.prop for Urushi
#
# Notify the system that the RIL only signals once
ro.telephony.call_ring.multiple=false
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
wifi.interface = wlan0
ro.semc.wifi.hostapd=1
ro.semc.timescape_keys=Sony_Ericsson_Xperia
ro.semc.sols.product-code=83
ro.semc.sols.company-code=5
persist.ro.ril.sms_sync_sending=1
ro.use_data_netmgrd=true
# Disable strict mode checking
persist.android.strictmode=0
# Constant values for Battery test in Service menu
ro.semc.batt.capacity=1500
ro.semc.batt.test.z_threshold=50
ro.semc.batt.test.min_level=70
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
#Default values/Locales for the hiding languages feature
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
ro.com.google.gmsversion=2.3_r5
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-sonyericsson
persist.usb.storagemode=mtp
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
#ro.ril.hsxpa=1
#ro.ril.gprsclass=10
ro.semc.xloud.supported=true
ro.com.google.clientidbase=android-sonyericsson
dalvik.vm.heapsize=48m
dalvik.vm.heapstartsize=6m
dalvik.vm.heapgrowthlimit=40m
ro.sf.lcd_density=240
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.drm.active.num=4
ro.drm.active.0=semc,1
ro.drm.active.1=cmla,0
ro.drm.active.2=viaccess,0
ro.drm.active.3=marlin,1
#Misc Tweaks
wifi.supplicant_scan_interval=60
persist.sys.purgeable_assets=1
windowsmgr.max_events_per_sec=200
#Network
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=0
ro.ril.hsdpa.category=8
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.sdr=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
ro.ril.disable.power.collapse=0
ro.ril.enable.a52=0
ro.ril.enable.a53=0
ro.ril.enable.dtm=0
#Media Tweak
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
#Network Tweaks
net.tcp.buffersize.default=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.wifi=87380,1048576,2097152,87380,1048576,2097152
net.tcp.buffersize.lte=87380,524288,1048576,87380,524288,1048576
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.umts=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.gprs=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.edge=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
#OOM Tweaks
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=3
ro.PERCEPTIBLE_APP_ADJ=2
ro.HEAVY_WEIGHT_APP_ADJ=4
ro.SECONDARY_SERVER_ADJ=6
ro.BACKUP_APP_ADJ=7
ro.HOME_APP_ADJ=1
ro.HIDDEN_APP_MIN_ADJ=10
ro.EMPTY_APP_ADJ=15
what router do you have? that could be the problem and not the phone, the router could be dropping the packets as the phone is downloading too much data so the router will kill the connection. If you can log into the router check the settings for wifi make sure you using WPA2 personal mixed AES then change the settings on the phone also. WEP is bad for dropping out signal
NeilDownx said:
what router do you have? that could be the problem and not the phone, the router could be dropping the packets as the phone is downloading too much data so the router will kill the connection. If you can log into the router check the settings for wifi make sure you using WPA2 personal mixed AES then change the settings on the phone also. WEP is bad for dropping out signal
Click to expand...
Click to collapse
My router TPlink tl-wr740n. I have this problem with all other routers, so this is not router problem its phone Hardware/Software isue ;/
Before releasing a new ROM that I have been working on I thought I would share the build.prop file that it uses. I felt that it might generate some useful discussion. If that discussion leads to problems fixed or performance gained (in any ROM) then that would be splendid.
It is likely that many of the settings in fact do nothing -- it is really not practical to test them all. I am, however, concerned about settings that users feel introduce problems and/or degrade performance.
I tried to make it human readable, however that comes at the cost of easy diffing with your current file.
Code:
# (_) (_)(_) ____
# (_)___(_) _ _ _ (____)
# (_______)(_)(_) (_)(_)_(_)
# (_) (_)(_)(_)_(_)(__)__
# (_) (_)(_) (_) (____)
DEVICE_PROVISIONED=1
# build settings
ro.build.id=HMJ15
ro.build.display.id=HMJ15
ro.build.version.incremental=218994.1
ro.build.version.sdk=12
ro.build.version.codename=REL
ro.build.version.release=3.1
ro.build.date=六 12月 3 07:12:41 CST 2011
ro.build.date.utc=1322867561
ro.build.type=user
ro.build.user=finniest
ro.build.host=ABM010
ro.build.tags=release-keys
# product settings
ro.product.model=HTC PucciniLte
ro.product.brand=cingular_us
ro.product.name=htc_puccinilte
ro.product.device=puccinilte
ro.product.board=verdilte
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=en
ro.product.locale.region=US
ro.product.version=Hive I ROM
ro.product.processor=Dual 1.5 GHz
ro.product.ram=1 GB
ro.product.display_resolution=10.1 inch WXGA (1280x800)
ro.product.main_camera=8 M
ro.product.front_camera=1.3 M
ro.product.wifi=802.11 a/b/g/n
ro.product.bluetooth=3.0
# board settings
ro.board.platform=msm8660
ro.build.product=puccinilte
ro.build.description=1.30.502.1 CL218994 release-keys
ro.build.changelist=218994
ro.build.fingerprint=cingular_us/htc_puccinilte/puccinilte:3.1/HMJ15/218994.1:user/release-keys
ro.build.characteristics=default tablet tablet
ro.build.project=Puccini_LTE:229055
ro.build.languageremove=0
ro.build.sense.version=2.1
# rild settings
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
#rild.libpath=/system/lib/libhtc_ril.so
persist.rild.nitz_plmn=""
persist.rild.nitz_long_ons_0=""
persist.rild.nitz_long_ons_1=""
persist.rild.nitz_long_ons_2=""
persist.rild.nitz_long_ons_3=""
persist.rild.nitz_short_ons_0=""
persist.rild.nitz_short_ons_1=""
persist.rild.nitz_short_ons_2=""
persist.rild.nitz_short_ons_3=""
persist.rild.ril.ltedr=0
persist.rild.ril.ltedrtable=max_retries=infinite,10000
# ril settings
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.gprsclass=12
ro.ril.hsdpa.category=10
ro.ril.hsupa.category=6
ro.ril.hsxpa=3
ro.ril.radio.svn=6
ro.ril.disable.fd.plmn.prefix=23402,23410,23411
ro.ril.enable.sdr=0
ro.ril.enable.gea3=1
ro.ril.enable.ucsq=2
ro.ril.enable.sim.hot.swap=1
ro.ril.set.mtusize=1410
ro.ril.disable.cpc=1
ro.ril.enable.dtm=0
ro.ril.fast.dormancy.rule=1
ro.ril.att.feature=1
ro.ril.def.agps.mode=2
ro.ril.sensor.sleep.control=1
ro.ril.disable.power.collapse=0
ro.ril.enable.prl.recognition=1
ro.ril.reject.cs.ss.enabled=0
ro.ril.reject.mo.sms.enabled=0
ro.ril.reject.mo.ussd.enabled=0
ro.baseband.arch=msm
# aa settings
ro.aa.romver=1.30.502.1
ro.aa.skulist=502
ro.aa.customizationid=262057
ro.aa.mainsku=502
ro.aa.taskid=229055
ro.aa.maincid=CWS__001
ro.aa.modelid=PG0941000
ro.aa.project=Puccini_LTE
ro.aa.cidlist=CWS__001
ro.aa.rid=235
# cne settings
persist.cne.UseCne=0
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=0
persist.cne.snsr.based.rat.mgt=0
persist.cne.bat.based.rat.mgt=0
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
# data settings
ro.config.lte=1
ro.use_data_netmgrd=1
persist.data_netmgrd_nint=11
telephony.lteOnGsmDevice=1
ro.config.svdo=1
ro.ril.set.mtu1472=1
# telephony settings
ro.phone.function=1
ro.telephony.default_network=0
#ro.telephony.default_network=9
ro.telephony.ril_class=HTCQualcommRIL
ro.telephony.call_ring.delay=0
ro.phone_storage=0
ro.gsm.2nd_data_retry_config=max_retries=3, 2000, 2000, 2000
# wifi settings
wifi.interface=eth0
wifi.supplicant_scan_interval=120
ro.wifi.channels=
# brcm settings
service.brcm.bt.activation=0
service.brcm.bt.srv_active=0
service.brcm.bt.hcid_active=0
service.brcm.bt.btld=0
service.brcm.bt.btld_pid=0
service.brcm.bt.bluetoothd_pid=0
service.brcm.bt.avrcp_pass_thru=0
service.brcm.bt.avrcp_toggle=1
service.brcm.bt.ag_supported=1
# bluetooth settings
ro.bt.chipset=Broadcom BCM4329-B1
ro.bt.version=Bluetooth 2.1 + EDR
ro.bt.stack=Broadcom BTL-A
ro.bt.stack.version=2.0.50.032
ro.bt.profiles=4270403
net.bt.name=HIVEBOX
# audio settings
htc.audio.alt.enable=1
htc.audio.hac.enable=0
# qualcomm settings
com.qc.hardware=1
debug.qc.hardware=1
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
ro.qualcomm.cabl=0
# gpu settings
video.accelerate.hw=1
persist.sys.composition.type=gpu
debug.composition.type=gpu
# opengl settings
ro.opengles.version=131072
debug.egl.hw=1
hw3d.force=1
# interface settings
ro.sf.lcd_density=160
persist.sys.ui.hw=1
debug.sf.hw=1
debug.fb.rgb565=0
persist.sys.NV_FPSLIMIT=60
windowsmgr.max_events_per_sec=70
keydispatchtimeout=15000
# filesystem settings
ro.emmc=1
ro.phone_fat=1
ro.ext4fs=1
ro.sdcard2=1
# dalvik general tweaks
dalvik.vm.heapsize=256m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.verify-bytecode=0
dalvik.vm.check-dex-sum=0
dalvik.vm.dexopt-flags=m=y,o=v,u=y
dalvik.vm.dexopt-data-only=1
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# dalvik jni tweaks
dalvik.vm.checkjni=0
dalvik.vm.jniopts=warnonly
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
# drm settings
drm.service.enabled=0
ro.marlin.drm.service.enabled=0
# reporting settings
ro.config.nocheckin=1
ro.config.htc.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# adb settings
persist.service.adb.enable=1
persist.adb.notify=1
# root settings
ro.secure=0
persist.sys.root_access=1
# sound settings
ro.config.ringtone=Voila.ogg
ro.config.notification_sound=Voila.ogg
ro.config.msg_notification=Voila.ogg
ro.config.cal_notification=Voila.ogg
ro.config.alarm_alert=Cesium.ogg
# htc settings
ro.htc.common.version=3.0.0.0
htc.abl.enable=0
ro.htc.framework.screencapture=1
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-htc
ro.com.google.clientidbase.gmm=android-htc
ro.com.google.clientidbase.ms=android-att-us
ro.htc.checkin.url=http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl=http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN=http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN=http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url=http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN=http://fotamsg.htccomm.com.cn/android/extra/
# setupwizard settings (these do not work well)
ro.setupwizard.mode=OPTIONAL
ro.setupwizard.enterprise_mode=1
ro.setupwizard.wifi_required=0
ro.setupwizard.enable_bypass=1
# miscellaneous settings
ro.usb_host=1
pm.sleep_mode=0
ro.fb.mode=1
keyguard.no_require_sim=1
persist.pdn.profile=pta
net.hostname=HIVEBOX
ro.media.enc.jpeg.quality=90
profiler.anr_dump_native_uid=9999
ro.config.hw_quickpoweron=0
# arthur wanted this
profile_freeNativeBmp=0
# enabling monkey borks "Languages and input"
#ro.monkey=1
The above build.prop has been tested successfully for approximately one week with the bet-you-cannot-guess-the-name ROM that I have been working on. I have NOT tested with any existing ROMs.
Hive?
Anyways, I can't say I know what even half of the lines in the build.prop do, but if it works for you, I'd imagine anyone who still has their Jetstreams would be happy with whatever you come up with.
finniest said:
Before releasing a new ROM that I have been working on I thought I would share the build.prop file that it uses. I felt that it might generate some useful discussion. If that discussion leads to problems fixed or performance gained (in any ROM) then that would be splendid.
It is likely that many of the settings in fact do nothing -- it is really not practical to test them all. I am, however, concerned about settings that users feel introduce problems and/or degrade performance.
I tried to make it human readable, however that comes at the cost of easy diffing with your current file.
Code:
# (_) (_)(_) ____
# (_)___(_) _ _ _ (____)
# (_______)(_)(_) (_)(_)_(_)
# (_) (_)(_)(_)_(_)(__)__
# (_) (_)(_) (_) (____)
DEVICE_PROVISIONED=1
# build settings
ro.build.id=HMJ15
ro.build.display.id=HMJ15
ro.build.version.incremental=218994.1
ro.build.version.sdk=12
ro.build.version.codename=REL
ro.build.version.release=3.1
ro.build.date=六 12月 3 07:12:41 CST 2011
ro.build.date.utc=1322867561
ro.build.type=user
ro.build.user=finniest
ro.build.host=ABM010
ro.build.tags=release-keys
# product settings
ro.product.model=HTC PucciniLte
ro.product.brand=cingular_us
ro.product.name=htc_puccinilte
ro.product.device=puccinilte
ro.product.board=verdilte
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=en
ro.product.locale.region=US
ro.product.version=Hive I ROM
ro.product.processor=Dual 1.5 GHz
ro.product.ram=1 GB
ro.product.display_resolution=10.1 inch WXGA (1280x800)
ro.product.main_camera=8 M
ro.product.front_camera=1.3 M
ro.product.wifi=802.11 a/b/g/n
ro.product.bluetooth=3.0
# board settings
ro.board.platform=msm8660
ro.build.product=puccinilte
ro.build.description=1.30.502.1 CL218994 release-keys
ro.build.changelist=218994
ro.build.fingerprint=cingular_us/htc_puccinilte/puccinilte:3.1/HMJ15/218994.1:user/release-keys
ro.build.characteristics=default tablet tablet
ro.build.project=Puccini_LTE:229055
ro.build.languageremove=0
ro.build.sense.version=2.1
# rild settings
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
#rild.libpath=/system/lib/libhtc_ril.so
persist.rild.nitz_plmn=""
persist.rild.nitz_long_ons_0=""
persist.rild.nitz_long_ons_1=""
persist.rild.nitz_long_ons_2=""
persist.rild.nitz_long_ons_3=""
persist.rild.nitz_short_ons_0=""
persist.rild.nitz_short_ons_1=""
persist.rild.nitz_short_ons_2=""
persist.rild.nitz_short_ons_3=""
persist.rild.ril.ltedr=0
persist.rild.ril.ltedrtable=max_retries=infinite,10000
# ril settings
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.gprsclass=12
ro.ril.hsdpa.category=10
ro.ril.hsupa.category=6
ro.ril.hsxpa=3
ro.ril.radio.svn=6
ro.ril.disable.fd.plmn.prefix=23402,23410,23411
ro.ril.enable.sdr=0
ro.ril.enable.gea3=1
ro.ril.enable.ucsq=2
ro.ril.enable.sim.hot.swap=1
ro.ril.set.mtusize=1410
ro.ril.disable.cpc=1
ro.ril.enable.dtm=0
ro.ril.fast.dormancy.rule=1
ro.ril.att.feature=1
ro.ril.def.agps.mode=2
ro.ril.sensor.sleep.control=1
ro.ril.disable.power.collapse=0
ro.ril.enable.prl.recognition=1
ro.ril.reject.cs.ss.enabled=0
ro.ril.reject.mo.sms.enabled=0
ro.ril.reject.mo.ussd.enabled=0
ro.baseband.arch=msm
# aa settings
ro.aa.romver=1.30.502.1
ro.aa.skulist=502
ro.aa.customizationid=262057
ro.aa.mainsku=502
ro.aa.taskid=229055
ro.aa.maincid=CWS__001
ro.aa.modelid=PG0941000
ro.aa.project=Puccini_LTE
ro.aa.cidlist=CWS__001
ro.aa.rid=235
# cne settings
persist.cne.UseCne=0
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=0
persist.cne.snsr.based.rat.mgt=0
persist.cne.bat.based.rat.mgt=0
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
# data settings
ro.config.lte=1
ro.use_data_netmgrd=1
persist.data_netmgrd_nint=11
telephony.lteOnGsmDevice=1
ro.config.svdo=1
ro.ril.set.mtu1472=1
# telephony settings
ro.phone.function=1
ro.telephony.default_network=0
#ro.telephony.default_network=9
ro.telephony.ril_class=HTCQualcommRIL
ro.telephony.call_ring.delay=0
ro.phone_storage=0
ro.gsm.2nd_data_retry_config=max_retries=3, 2000, 2000, 2000
# wifi settings
wifi.interface=eth0
wifi.supplicant_scan_interval=120
ro.wifi.channels=
# brcm settings
service.brcm.bt.activation=0
service.brcm.bt.srv_active=0
service.brcm.bt.hcid_active=0
service.brcm.bt.btld=0
service.brcm.bt.btld_pid=0
service.brcm.bt.bluetoothd_pid=0
service.brcm.bt.avrcp_pass_thru=0
service.brcm.bt.avrcp_toggle=1
service.brcm.bt.ag_supported=1
# bluetooth settings
ro.bt.chipset=Broadcom BCM4329-B1
ro.bt.version=Bluetooth 2.1 + EDR
ro.bt.stack=Broadcom BTL-A
ro.bt.stack.version=2.0.50.032
ro.bt.profiles=4270403
net.bt.name=HIVEBOX
# audio settings
htc.audio.alt.enable=1
htc.audio.hac.enable=0
# qualcomm settings
com.qc.hardware=1
debug.qc.hardware=1
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
ro.qualcomm.cabl=0
# gpu settings
video.accelerate.hw=1
persist.sys.composition.type=gpu
debug.composition.type=gpu
# opengl settings
ro.opengles.version=131072
debug.egl.hw=1
hw3d.force=1
# interface settings
ro.sf.lcd_density=160
persist.sys.ui.hw=1
debug.sf.hw=1
debug.fb.rgb565=0
persist.sys.NV_FPSLIMIT=60
windowsmgr.max_events_per_sec=70
keydispatchtimeout=15000
# filesystem settings
ro.emmc=1
ro.phone_fat=1
ro.ext4fs=1
ro.sdcard2=1
# dalvik general tweaks
dalvik.vm.heapsize=256m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.verify-bytecode=0
dalvik.vm.check-dex-sum=0
dalvik.vm.dexopt-flags=m=y,o=v,u=y
dalvik.vm.dexopt-data-only=1
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# dalvik jni tweaks
dalvik.vm.checkjni=0
dalvik.vm.jniopts=warnonly
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
# drm settings
drm.service.enabled=0
ro.marlin.drm.service.enabled=0
# reporting settings
ro.config.nocheckin=1
ro.config.htc.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# adb settings
persist.service.adb.enable=1
persist.adb.notify=1
# root settings
ro.secure=0
persist.sys.root_access=1
# sound settings
ro.config.ringtone=Voila.ogg
ro.config.notification_sound=Voila.ogg
ro.config.msg_notification=Voila.ogg
ro.config.cal_notification=Voila.ogg
ro.config.alarm_alert=Cesium.ogg
# htc settings
ro.htc.common.version=3.0.0.0
htc.abl.enable=0
ro.htc.framework.screencapture=1
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-htc
ro.com.google.clientidbase.gmm=android-htc
ro.com.google.clientidbase.ms=android-att-us
ro.htc.checkin.url=http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl=http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN=http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN=http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url=http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN=http://fotamsg.htccomm.com.cn/android/extra/
# setupwizard settings (these do not work well)
ro.setupwizard.mode=OPTIONAL
ro.setupwizard.enterprise_mode=1
ro.setupwizard.wifi_required=0
ro.setupwizard.enable_bypass=1
# miscellaneous settings
ro.usb_host=1
pm.sleep_mode=0
ro.fb.mode=1
keyguard.no_require_sim=1
persist.pdn.profile=pta
net.hostname=HIVEBOX
ro.media.enc.jpeg.quality=90
profiler.anr_dump_native_uid=9999
ro.config.hw_quickpoweron=0
# arthur wanted this
profile_freeNativeBmp=0
# enabling monkey borks "Languages and input"
#ro.monkey=1
The above build.prop has been tested successfully for approximately one week with the bet-you-cannot-guess-the-name ROM that I have been working on. I have NOT tested with any existing ROMs.
Click to expand...
Click to collapse
Can't wait to flash your ROM ... Any details?
Sent from my HTC One
BIGMOH said:
Can't wait to flash your ROM ... Any details?
Click to expand...
Click to collapse
I'm glad to hear it. The biggest detail is that it is deSensed -- with the exception of the lock screen and camera/camcorder. Even the setup wizard is vanilla Android. Not everyone will like this fact, but there are other ROMs available for folks that need HTC Sense.
I've bundled a few recommended apps, but even with them your app drawer will be less than one page. There are fewer services running and less stuff cluttering your share menus. Less is more -- in my opinion.
It will come with different sounds, newer fonts, updated standard apps and updated tools. You won't have to update much after installing -- at least for the next while. I've also bundled a different gallery, but the integration isn't perfect. Third party camera and camcorder apps should work a little better than with other Jetstream ROMs.
There are a few more details, but those are the biggest details. I'll have a very comprehensive changelog for those that are interested.
It is all packaged up in an AROMA installer that I hope gets new users interested in trying ROMs. I'll shoot the third video in my stock-to-custom-ROM series after I release Hive.
It is still Honeycomb 3.1, but I might try to get 3.2 working in the future. Beyond that is nearly impossible without HTC help.
finniest said:
I'm glad to hear it. The biggest detail is that it is deSensed -- with the exception of the lock screen and camera/camcorder. Even the setup wizard is vanilla Android. Not everyone will like this fact, but there are other ROMs available for folks that need HTC Sense.
I've bundled a few recommended apps, but even with them your app drawer will be less than one page. There are fewer services running and less stuff cluttering your share menus. Less is more -- in my opinion.
It will come with different sounds, newer fonts, updated standard apps and updated tools. You won't have to update much after installing -- at least for the next while. I've also bundled a different gallery, but the integration isn't perfect. Third party camera and camcorder apps should work a little better than with other Jetstream ROMs.
There are a few more details, but those are the biggest details. I'll have a very comprehensive changelog for those that are interested.
It is all packaged up in an AROMA installer that I hope gets new users interested in trying ROMs. I'll shoot the third video in my stock-to-custom-ROM series after I release Hive.
It is still Honeycomb 3.1, but I might try to get 3.2 working in the future. Beyond that is nearly impossible without HTC help.
Click to expand...
Click to collapse
Thanks for the update man. I'm really looking forward to it.
Sent from my HTCONE using Tapatalk
I have a generic Amlogic S802 (MXIII) device that I feed to my Viewsonic Pro8200 projector. I have a display issue, and I know the general principle of fixing it, but I can't seem to find a way to do it in Android.
The problem:
My black levels are crushed, or rather they are completely destroyed. To get an idea of what I see on my projector, I can only see the last 3 boxes (out of 20 boxes) shown when you follow the link (can't post link): Google "lagom black level" and it should be the first result.
This makes watching most of my favorite TV content and movies a miserable experience (e.g., Walking Dead, Game of Thrones).
The solution on a different OS:
I previously had this problem with my projector when I had a Windows-based HTPC connected. I fixed it by changing the video pixel format setting to RGB full in Catalyst. It had been set to RGB limited by default, and that was causing my blacks to be crushed (#racismnotdead).
What can I do in Android?
I have gone through the media box settings and Android settings and have found no option to adjust the way HDMI is outputted. Is there a conf or prop file I can edit to force RGB full? Is there any other way to tweak HDMI output settings. Does a custom ROM exist with these options that will work on my generic Amlogic S802 device?
I have been digging through threads on this site and other forums, and I have not found any describing a similar problem. Maybe there aren't many people with really cheap projectors.
My current build.prop file
These are my current build.prop settings:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.20150116 test-keys
ro.build.version.incremental=20150116
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Fri Jan 16 14:25:51 CST 2015
ro.build.date.utc=1421389551
ro.build.type=user
ro.build.user=lhh
ro.build.host=ubuntu
ro.build.tags=test-keys
ro.product.model=MXIII
ro.product.brand=MBX
ro.product.name=k200
ro.product.device=MXIII
ro.product.board=k200
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=MBX
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=11
ro.board.platform=meson8
# ro.build.product is obsolete; use ro.product.device
ro.build.product=k200
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=k200-user 4.4.2 KOT49H 20150116 test-keys
ro.build.fingerprint=MBX/k200/k200:4.4.2/KOT49H/20150116:user/test-keys
ro.build.characteristics=mbx
# end build properties
#
# from device/amlogic/k200/system.prop
#
ro.adb.secure=1
#rild.libpath=/system/lib/libreference-ril.so
#rild.libargs=-d /dev/ttyS0
#ro.sf.lcd_density=240
keyguard.no_require_sim=1
mbx.timeout.enable=false
sys.screensaver.enable=true
ro.statusbar.widget=false
ro.statusbar.button=false
ro.statusbar.yearmonthdayweek=false
#wifi.interface=ra0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
#wifi.supplicant_scan_interval = 60
#alsa.mixer.playback.master=DAC2 Analog
#alsa.mixer.capture.master=Analog
hwui.render_dirty_regions=false
# Configure features
hw.nopm=true
hw.nobattery=true
hw.nophone=true
hw.novibrate=true
hw.nogps=true
hw.cameras=0
hw.hasethernet=true
hw.hasusbcamera=true
hw.has.accelerometer=true
#used in packages/apps/Settings/.../Utils.java
hw.has.bluetooth=false
ro.ethernet.default_on=true
ro.config.low_ram=false
media.amplayer.low_ram=true
#dalvik.vm.jit.codecachesize=0
ro.platform.support.dtsmulasset=true
ro.platform.support.dtstrans=true
ro.platform.support.dts=true
ro.platform.support.dolby=true
ro.screen.has.timeout=false
ro.screen.has.brightness=false
ro.screen.has.tvout=true
ro.platform.has.security=false
ro.platform.has.tts=false
ro.platform.has.touch=false
ro.platform.has.mbxuimode=true
#ro.platform.has.1080scale=2
#ro.fontScale=1.3
ro.platform.has.digitaudio=true
ro.platform.has.defaulttvfreq=false
ro.hw.ethernet.onboard=true
ro.platform.has.cvbsmode=false
ro.platform.hdmionly=true
ro.platform.has.cecmode=false
# Use OSD2 mouse patch
#ro.ui.cursor=osd2
#ro.ui.cursor.autohide=true
#ro.ui.cursor.timeout=10000
ro.ui.cursor=surface
#set to 0 temporarily so touch works without other changes
ro.sf.hwrotation=0
ro.hardware=amlogic
#camera 720p
ro.camera.preview.MaxSize=1280x720
ro.camera.preview.LimitedRate=1280x720x30,640x480x30,320x240x28
ro.camera.preview.UseMJPEG=1
# Enable 32-bit OSD
sys.fb.bits=32
# Disable GPS
gps.enable=false
#keep landscape in launcher
sys.keeplauncher.landcape=true
#Enable player buildin
media.amsuperplayer.enable=true
media.amplayer.enable-acodecs=ac3,eac3,rm,flac,dts,thd
media.amplayer.enable=true
media.amplayer.support-exname=divx,h264,avi,ts,m2ts,mkv,mp4,mpg,mpeg,rm,rmvb,wmv,ts,dat,vob,vc1
media.amplayer.support-exname1=mp2,mp3,ac3
media.amsuperplayer.m4aplayer=STAGEFRIGHT_PLAYER
media.amsuperplayer.defplayer=PV_PLAYER
media.amplayer.thumbnail=true
media.amplayer.startmode=true
#media.p2pplay.enable=true
media.amplayer.widevineenable=false
media.amplayer.dsource4local=1
media.arm.audio.decoder=ape,flac,dts,ac3,eac3,wma,wmapro,mp3,aac,vorbis,raac,cook,amr,pcm,adpcm,aac_latm,rm,alac
media.wfd.use-pcm-audio=true
media.wfd.videoreolutiontype=0
media.wfd.videoreolutiongroup=5
media.wfd.videoframerate=20
media.html5videowin.enable=1
media.decoder.vfm.defmap=decoder ppmgr deinterlace amvideo
media.amplayer.seekkeyframe=1
mbx.3D_Bright.enable=false
# Nand write need force sync when gadget
gadget.nand.force_sync=true
# Camera exif
ro.camera.exif.make=M8
ro.camera.exif.model=k200
#hide status bar
#zgq modify true->false show status bar
persist.sys.hideStatusBar=true
#support media poll uevent,can use sd cardread on usb port
has.media.poll=true
#used forward seek for libplayer
media.libplayer.seek.fwdsearch=1
######## UBOOTENV VARIBLES - r/w as system properties ##########
#
# Now we can load ubootenv varibles to system properties.
# We use a special prefix ("ubootenv.var" as default) to indicate that the 'property'
# actually is an ubootenv varible.
#
# A ubootenv 'property' will be initialized during system booting. And when user set
# a different value, it will be written back to ubootenv device immediately.
#
## prefix of ubootenv varibles - should less than 16 chars.
#UBOOTENV MTD NAME
#ubootenv.var.bootcmd=
#ubootenv.var.cpuclock=
#ubootenv.var.gpuclock=
#ubootenv.var.memsize=
#ubootenv.var.ethaddr=
#ubootenv.var.ipaddr=
#ubootenv.var.gatewayip=
ubootenv.var.outputmode=
#ubootenv.var.screenratio=
#ubootenv.var.oobeflag=
ubootenv.var.480poutputx=
ubootenv.var.480poutputy=
ubootenv.var.480poutputwidth=
ubootenv.var.480poutputheight=
ubootenv.var.480ioutputx=
ubootenv.var.480ioutputy=
ubootenv.var.480ioutputwidth=
ubootenv.var.480ioutputheight=
ubootenv.var.576poutputx=
ubootenv.var.576poutputy=
ubootenv.var.576poutputwidth=
ubootenv.var.576poutputheight=
ubootenv.var.576ioutputx=
ubootenv.var.576ioutputy=
ubootenv.var.576ioutputwidth=
ubootenv.var.576ioutputheight=
ubootenv.var.720poutputx=
ubootenv.var.720poutputy=
ubootenv.var.720poutputwidth=
ubootenv.var.720poutputheight=
ubootenv.var.1080poutputx=
ubootenv.var.1080poutputy=
ubootenv.var.1080poutputwidth=
ubootenv.var.1080poutputheight=
ubootenv.var.1080ioutputx=
ubootenv.var.1080ioutputy=
ubootenv.var.1080ioutputwidth=
ubootenv.var.1080ioutputheight=
ubootenv.var.4k2k24hz_x=
ubootenv.var.4k2k24hz_y=
ubootenv.var.4k2k24hz_width=
ubootenv.var.4k2k24hz_height=
ubootenv.var.4k2k25hz_x=
ubootenv.var.4k2k25hz_y=
ubootenv.var.4k2k25hz_width=
ubootenv.var.4k2k25hz_height=
ubootenv.var.4k2k30hz_x=
ubootenv.var.4k2k30hz_y=
ubootenv.var.4k2k30hz_width=
ubootenv.var.4k2k30hz_height=
ubootenv.var.4k2ksmpte_x=
ubootenv.var.4k2ksmpte_y=
ubootenv.var.4k2ksmpte_width=
ubootenv.var.4k2ksmpte_height=
ubootenv.var.digitaudiooutput=
ubootenv.var.defaulttvfrequency=
ubootenv.var.has.accelerometer=
ubootenv.var.cecconfig=
ubootenv.var.cvbsmode=
ubootenv.var.hdmimode=
ubootenv.var.disp.fromleft=
#Configure the dtv standard, can only be DVB,ATSC
dtv.standard=DVBS
# Disable preload-class
ro.amlogic.no.preloadclass=1
virtualsd.enable=true
#service.adb.tcp.port=5555
const.window.w=1920
const.window.h=1080
sys.defaultStream.ismusic=true
ro.app.optimization=true
ro.platform.has.realoutputmode=true
#add livhls,libcurl as default hls
media.libplayer.curlenable=true
media.libplayer.modules=vhls_mod,dash_mod,curl_mod
#sofrware demux
libplayer.netts.recalcpts=1
libplayer.livets.softdemux=1
#libplayer.netts.softdemux=0
#media.libplayer.fastswitch=1
#Time Zone
persist.sys.timezone=Asia/Shanghai
ro.osd2.size=64x64
#new feature 81282
ro.alarm.align=true
#add for video boot, 1 means use video boot, others not .
service.bootvideo=0
#new feature 81297
ro.permissions.settings=true
#don't need brightness
prop.sp.brightness=off
ro.quickboot.enable=false
#config.disable_telephony=true
#config.disable_bluetooth=true
config.enable_quickboot=true
#config.disable_vibrator=true
#Add 3G
hw.nophone=false
#has spdif output
ro.hdmi.spdif=true
bt.keep_on.enable=true
#vpn link mtu config
ro.vpn_wlan_mtu=1400
ro.vpn_eth_mtu=1400
ro.vpn_ppp_mtu=1250
ro.default_wlan_mtu=1500
ro.default_eth_mtu=1500
#netxeon add begin
ro.statusbar.screenshot=true
ro.statusbar.volume=true
persist.sys.dBluetooth=true
#netxeon add end
#
# ADDITIONAL_BUILD_PROPERTIES
#
ds1.audio.multichannel.support=false
ds1.audio.effect.support=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.opengles.version=131072
debug.hwui.render_dirty_regions=false
ro.config.alarm_alert=Alarm_Classic.ogg
sys.amplayer.drop_pcm=1
ubootenv.var.firstboot=2
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=384m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
wifi.interface=wlan0
gps.enable=false
ro.app.optimization=true
drm.service.enable=true
ro.platform.has.pppoe=true
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
More details
I'm honestly not surprised that this has no replies, they'll probably come in months down the road.
Anyways, I have some more details. My projector has three modes related to HDMI color space: Auto, RGB, Ycbcr. Booting the device in each of those modes has no effect on the black levels.
However, I did find something that had an actual affect on the black levels. When I set the HDMI output to 576p 50 Hz or 480p 60 Hz, I could see 14 out of the 20 black level boxes (Nagom LCD calibration website) with daylight creeping in the room. That's fantastic, but the UI and videos look like trash at those resolutions, so it's at best additional information and not even close to a remedy.
I am ready to buy a BenQ projector at Wal-Mart with the intention of returning after a couple of weeks just to give myself a reprieve from this color crushing nightmare of an excuse for a home theater system.
mjmacky said:
I'm honestly not surprised that this has no replies, they'll probably come in months down the road.
Anyways, I have some more details. My projector has three modes related to HDMI color space: Auto, RGB, Ycbcr. Booting the device in each of those modes has no effect on the black levels.
However, I did find something that had an actual affect on the black levels. When I set the HDMI output to 576p 50 Hz or 480p 60 Hz, I could see 14 out of the 20 black level boxes (Nagom LCD calibration website) with daylight creeping in the room. That's fantastic, but the UI and videos look like trash at those resolutions, so it's at best additional information and not even close to a remedy.
I am ready to buy a BenQ projector at Wal-Mart with the intention of returning after a couple of weeks just to give myself a reprieve from this color crushing nightmare of an excuse for a home theater system.
Click to expand...
Click to collapse
I'm going to be using a 808b stick that I have and was wondering about getting the Viewsonic, have you found any solution to this problem?