Guys please help me,
My tg01 boots normally but home screen is bricked, keyboard doesn't give any inputs, when i acces to file explorer i cant open folders. So i cant run sddl+ to flash the phone...
I have stonROM with sense.
solution will be appreciated tnx
Hello,
You can do : PIN Recovery Method and if doesn't works use TG Downloader
Good luck
isikil87 said:
Guys please help me,
My tg01 boots normally but home screen is bricked, keyboard doesn't give any inputs, when i acces to file explorer i cant open folders. So i cant run sddl+ to flash the phone...
I have stonROM with sense.
solution will be appreciated tnx
Click to expand...
Click to collapse
Which one are you running as i haven't seen this problem on either of my devices.
Have you tried a hard reset? Can you post these issues in the rom thread please so i can keep track of and fix any bugs.
leeston2379 said:
Which one are you running as i haven't seen this problem on either of my devices.
Have you tried a hard reset? Can you post these issues in the rom thread please so i can keep track of and fix any bugs.
Click to expand...
Click to collapse
Yes I have forget hard reset with buttons
Press camera + volume up + power until white screen.
Yo must choose "yes" two times (choice with volume down and valid with camera) !
bye
i love you guys my tg01 is alive... i had the first stonrom release...thx4all now im flashing the latest stonrom 23/08/2010
Related
Hello.
I just flashed to DCS Touch Pro v14 ROM.. Everything was ok, but when I restored the backup from SPB Backup, device made soft reset and then started my problem.
When I turn it on, it goes to startup HTC animation and then freeze on it.
Is there any way to hard reset or anything that would help me??
Please :-(
You have this info on the Wiki...
http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners
The Wiki is our friend
Cheers
Press :
Vol Down Button + Center Round Action Key + Reset Hole
> Prompt > Vol Up Button > Finish > Vol Up button.
Hope this help.
Lanyz said:
Hello.
I just flashed to DCS Touch Pro v14 ROM.. Everything was ok, but when I restored the backup from SPB Backup, device made soft reset and then started my problem.
When I turn it on, it goes to startup HTC animation and then freeze on it.
Is there any way to hard reset or anything that would help me??
Please :-(
Click to expand...
Click to collapse
Press volume buttons (inferiors) and soft reset at the same time.
When the screen go to about bootloaders still soft reset and "prays".
Bye
Many ppl trying to help
i love this forum...
I just solve it... Thank you for your advices..
Standard hard reset (Vol down + Center button + REset) didn't work - device must be on.
I tried this - Vol down. + Center button and turn on the device, that worked.
Once again thak you.
jcespi2005 said:
Many ppl trying to help
i love this forum...
Click to expand...
Click to collapse
I love this forum very much too But I wont post the previous one if I can see ur post | my connection is lagging like lazy dog
hang.tuah said:
I love this forum very much too But I wont post the previous one if I can see ur post | my connection is lagging like lazy dog
Click to expand...
Click to collapse
ey man, don't care about it... this is just for fun, you know...
Cheers
i just want to thank everyone who participated and answered this.
i almost ****ted a brick a few min's ago..
my device just stopped working it was real weird.. All was fine then i get a error msg saying that "Gyrator has encounterd an error" and BAM black screen. and no matter how many soft resets and batt pulls nothing worked.
so i immediatly signed on here..searched for about 30 seconds and with the 3 key press..all was good..device booted properly, configured itself, and im back on track.
Thanks,
Jstar
I tried the restore and it will not work for me. I can get to the boot loader screen, but it only shows serial and won't let me do anything else.
scaz24 said:
I tried the restore and it will not work for me. I can get to the boot loader screen, but it only shows serial and won't let me do anything else.
Click to expand...
Click to collapse
You need to get out of the GSM rom forum and go to the raphael CDMA forum. Anything you try to flash from here will not work on your device and my brick it.
http://forum.xda-developers.com/forumdisplay.php?f=465
Until you understand the difference between the two standards you shouldn't be flashing anything, as it will not be safe.
Here's how to 'hard reset' your TG01!
- Power off device
- Hold down 'volume up' and 'camera' buttons
- Press power button
- Follow on screen prompts
Sorted!
Original thread: Modaco forum
Thank you for the advice.
Thanks for help
Thanks for help
I've followed your instructions and succeeded 100%
Best Regards,
Bassam
how long will the toshiba logo stay?
edit:
ok after hard reset i have to do the short pin method
thanks anyway
fantomel said:
Here's how to 'hard reset' your TG01!
- Power off device
- Hold down 'volume up' and 'camera' buttons
- Press power button
- Follow on screen prompts
Sorted!
Original thread: Modaco forum
Click to expand...
Click to collapse
elder T said:
Thank you for the advice.
Click to expand...
Click to collapse
bassam777 said:
Thanks for help
I've followed your instructions and succeeded 100%
Best Regards,
Bassam
Click to expand...
Click to collapse
DeeJay05 said:
how long will the toshiba logo stay?
edit:
ok after hard reset i have to do the short pin method
thanks anyway
Click to expand...
Click to collapse
What about 'Master Reset' option in settings where you enter you pin i.e. 1234, press 'reset' and it hard resets the phone? :s
drupad2drupad said:
What about 'Master Reset' option in settings where you enter you pin i.e. 1234, press 'reset' and it hard resets the phone? :s
Click to expand...
Click to collapse
This is if you have a unbootable phone that cant get into windows. the only option is to use this method
hi
emergency PLEASE help me
i lost my tg01 boot i cant hard reset and pin flash
olyloh6696 said:
This is if you have a unbootable phone that cant get into windows. the only option is to use this method
Click to expand...
Click to collapse
yea it erase the nand flash like a format and the the drive is real clean and only toshiba logo is displayed
shahryarkh said:
hi
emergency PLEASE help me
i lost my tg01 boot i cant hard reset and pin flash
Click to expand...
Click to collapse
read this:
tg01 two brick variants how to unbrick
and do this:
2 Short-Pin unbrick method
1. Copy a functional ROM on SD Card. PRG folder
2. Rename to TG01WP_00.enc
3. Put the battery in and plug Power- Kable. Charging LED flash RED *
4. short pin 1 and 3 (back side under sim card, remove black plastic) Hold the short and RESET. Hold short pin 1 and 3 for 10 sec. Display go on and ROM flash beginn
* if red led not flash- use TG Downloader unbrick method with user manual in german (pls translate with google translator for other languanges)
contains: TG01 Downloader TG01 Driver TGTool
guys .. need a little help ... i installed tf 3d and when i restarted .. the phone just stands at "starting windows" .. any advice?
edit:
so i tryed to enter boodloader but no success what so ever .. eventually i used short pin method .. oh.. and i must say it was a breath taker ... now the phone works ok ...
warcaller said:
guys .. need a little help ... i installed tf 3d and when i restarted .. the phone just stands at "starting windows" .. any advice?
Click to expand...
Click to collapse
If a soft reset doesn't work then hard reset, hopefully you installed from a fresh rom flash/hard reset anyway?
warcaller said:
guys .. need a little help ... i installed tf 3d and when i restarted .. the phone just stands at "starting windows" .. any advice?
edit:
so i tryed to enter boodloader but no success what so ever .. eventually i used short pin method .. oh.. and i must say it was a breath taker ... now the phone works ok ...
Click to expand...
Click to collapse
tf3d never causes me any of these problems, what ROM were you on?
Thank you
... this saved my Day.
I wasn't able to do a Master Reset after Flashing.
OK, so after trying out the last android build from Markinus, winmo is now saving text messages to the SIM.
If I do a 'hard' reset, what will I lose on my phone? (contacts/texts/email setup etc??). Please explain the downside of hard reseting. Thanks! (or basically.. will I need to save/backup anything before hard resetting?)
Also: Will it remove the 'unlock' that I have applied to my phone?
Update: Well I did it anyway. Saved my contacts, but that's about it lol. Hopefully this will get my messages to saving back into memory rather than onto the sim.
OK guys, I need your help...
I have no idea why, but when I turn my phone on, all I get it the word HERO across the screen, and nothing more, I can not get into the flash menu, if I press power and HOME key, nothing,,,, i dont know how to sort this, can someone help me pls....
Thanks
Ian
Ian_4614 said:
OK guys, I need your help...
I have no idea why, but when I turn my phone on, all I get it the word HERO across the screen, and nothing more, I can not get into the flash menu, if I press power and HOME key, nothing,,,, i dont know how to sort this, can someone help me pls....
Thanks
Ian
Click to expand...
Click to collapse
if you don't have a recovery, the thing you can try is:
get HTC Sync
get an official RUU.exe (on htc website)
and run the exe
and definately root your phone afterwards
grtz
phew, solved it,, pressed VOL DOWN as i powered up and then did a hard boot reset,, all working now,, thanks all.
MODS pls close..
Hi Everyone,
I have a Samsung Galaxy 5 I5503. My small cousins played with it and put in the wrong pattern to unlock, now i cant even login (gmail) to unlock my phone.
I have decided to hard reset it. but pressing Vol up + Center button + Power button does nothing the download mode works.
Can some one suggest how i can workaround this?
I am even ready to flash it but can someone give me a step by step info i will be greatful.
Thank you all XDA Members
http://forum.xda-developers.com/showthread.php?t=781149
Here you can get step by step procedur for flashing your G5.Keep in mind that touchscreen wont work if you flash the firmware of i5508.
thank you ramu.rocks4u, i saw this thread and followed it and u are rite the touch does not work. but even after the flash, the phone still asks for username and password.
I tried different ways of hard reset and factory resets but none work.....
Need help???
any solution for this problem??
deadmantfa said:
thank you ramu.rocks4u, i saw this thread and followed it and u are rite the touch does not work. but even after the flash, the phone still asks for username and password.
I tried different ways of hard reset and factory resets but none work.....
Need help???
Click to expand...
Click to collapse
Do you know you username but not your password, or know neither of them?
Sent from my Galaxy5 using XDA Premium App™
Hi, a friend has this same problem but we don't really want to flash it, i read that there's a way to factory reset pushing some buttons...does anybody know which buttons are? thx.
darthjp said:
Hi, a friend has this same problem but we don't really want to flash it, i read that there's a way to factory reset pushing some buttons...does anybody know which buttons are? thx.
Click to expand...
Click to collapse
looking 4 d same
i heard that if you plug it into kies, you can somehow download a file that automatically factory resets your phone, probably designed for when this happens. Maybe you could try looking around on there or something? (i cant confirm it as my phones cm)
I have a huge problem now , flashed SLICK ROM , then decided to flash carbon, because i din't like Slick ROM, but since the ROM is stock Based i just manually turned of the phone & manually tried to boot into CWM recovery now the phone has a black screen & won't pass the LG LOGO , i pressed & hold the power button to see if that turns of the phone & reboots me back to the ROM but nop that's not the issue , now my issue is the phone is completely black screen & won't pass the LG logo :-'(
& i just got this phone, any help would be appreciated; Thanks in advance
I'm tying to restore with LGNPST but this is what i get & I'm kinda confuse on what to do, i try to select a BIN file to flash but when LGNPST gives me the BIN search option i have the file placed in my desktop but with the program it does not appear :'(
says MODEL NAME: unknown
i downloaded a stock firmware for the E970 , but now it says: The File Can't be open
i got the dll and my computer recognized my device any ideas why it can't be open i really need to flash to stock to unbrick this pleasee! help me :'(
it won't let me select the BIN FILES any ideas?? tha's all i need and i'm done
SOLVED!
MOD please delete this post, Thanks
Gabxter101 said:
SOLVED!
MOD please delete this post, Thanks
Click to expand...
Click to collapse
What do you think about writing down what you did and help others with same problem? Or there isn't need for that?
stefgi said:
What do you think about writing down what you did and help others with same problem? Or there isn't need for that?
Click to expand...
Click to collapse
No need i got it all memorized if anyone needs help i will gladly help them out, feel free to PM me with any questions or post your issue on Q&A section :highfive: :good:
Gabxter101 said:
No need i got it all memorized if anyone needs help i will gladly help them out, feel free to PM me with any questions or post your issue on Q&A section :highfive: :good:
Click to expand...
Click to collapse
I think he meant for you to post the steps of your solution here. That makes it available for all members to see/use/benefit from it. You can contribute to the forum's information here! Please do it!
Sent from my Optimus G using Tapatalk
Hi everyone i've a lg optimus g(e970). Please watch the video and tell me what I should do
youtube.com/watch?v=jRRzIROx1As
http://www.youtube.com/watch?v=jRRzIROx1As
ztrk1453 said:
Hi everyone i've a lg optimus g(e970). Please watch the video and tell me what I should do
youtube.com/watch?v=jRRzIROx1As
Click to expand...
Click to collapse
I have been able to get out of this by plugging and unplugging power cord while spamming power button until charge animation shows on screen. Most people take the phone apart and disconnect the battery. If you try my method don't give up right away, it took at least 10 minutes each time.
Edit..... I think I held the power button pressed while inserting and removing cord from charge port.