Hi, i need an ruu for win7 and g4 device, normal ruu crashes and vista ruu says: Error 300 invalid update tool ,hope u can help me
Regards
Related
Hi,
I need to go back to SPL 1.04 in order to have my warranty back because the Hermes stuck after downgrade of ROM.
I saw many explanation but I didn't see how to make it work, Need the right way PLEASE.
Thanks.
let your PDA boot into windows Mobile, then install my 1.04 SPL from the Hard-SPL thread following the instructions.
after this you will be able to flash any ROM to your PDA and it will be brought back to retail; including the SPL.
jumping in here... i am currently running 1.09-des spl and when i attempt install the 1.04 spl, it goes through all of the steps and when it tries to load the BL i get a update error and the install fails. i'm running vista btw.
I have the same "update error" problem running Windows Vista.
I have an MDA Vario II unlocked and SuperCID. But I can't do any radio-update, cause installation procedere stops with "update error" with the advise that I have to check my USB-connection.
I run bootloader SPL-1.40.Olipro
Sync etc. runs without any problems unter Vista. Can anybody help?
Stue said:
I have the same "update error" problem running Windows Vista.
I have an MDA Vario II unlocked and SuperCID. But I can't do any radio-update, cause installation procedere stops with "update error" with the advise that I have to check my USB-connection.
I run bootloader SPL-1.40.Olipro
Sync etc. runs without any problems unter Vista. Can anybody help?
Click to expand...
Click to collapse
try with XP, and use CustomRUU.
Stue said:
I have the same "update error" problem running Windows Vista.
I have an MDA Vario II unlocked and SuperCID. But I can't do any radio-update, cause installation procedere stops with "update error" with the advise that I have to check my USB-connection.
I run bootloader SPL-1.40.Olipro
Sync etc. runs without any problems unter Vista. Can anybody help?
Click to expand...
Click to collapse
Vista is the debil. use XP. Most all people with Vista have issues unless they downgrade their drivers. I don't have a link to the post that explained this but I read it here on these forums. If you don't have an XP computer surely someone you know does.
see the vista config guide
Hi, I got a problem when flashing my S300.
I already unlock it. But when I run ruu the phone stopped at the
3 color screen and xp ask for driver. Then Ruu says error 620. What driver should I install to get it work?
Thanks in advance
Hi,
i have a very big problem with my XDA (HTC Prophet).
I already had a WM6.1 Rom on my device but wanted to change to a different rom.
Now my Device is showing me the RGB screen after upgrading. The UpdateUtility works fine and i get "update successful" after the updating.
Now i can just install the original rom from O2 (WM 5).
Does anybody know a solution for my Problem?
Thanks and Greetings
MrDCA
Can you get the device to start up after installing the WM5 ROM?
What you will need to do is follow this to recover it: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
And then HardSPL before flashing a new WM6.1 ROM.
Thanks a lot l3v5y.
But there is still a problem. If i want to HardSPL my device i get an error.
Error 208: File Open
The update Utilite can not open the requested file. Please Check your update utility.
My SPL is 2.15.0001 so i have G4.
Sometimes i get this weired message:
Error 300: Invalid Update Tool
This update tool cannot be used for your PDA Phone.
Please get newer Update Utility.
mrdca said:
Thanks a lot l3v5y.
But there is still a problem. If i want to HardSPL my device i get an error.
Error 208: File Open
The update Utilite can not open the requested file. Please Check your update utility.
My SPL is 2.15.0001 so i have G4.
Sometimes i get this weired message:
Error 300: Invalid Update Tool
This update tool cannot be used for your PDA Phone.
Please get newer Update Utility.
Click to expand...
Click to collapse
Would you like to try my tool? (@ my signature~~, hope it works for your situation... )
You're using prophet tools? I think there is a slight issue with that, but I've fixed it and shall upload it now...
I tried both utilities.
none of them works for me.
Let me know if you uploaded the fixed version and i will test it!
Thank you guys!
The fixed version is now uploaded in the Prophet Tools thread. If that fails, you can use the HardSPL utilities from the New WM6 Upgrade guide.
hi guys,
trying to upgrade the radio rom, im using the customRUU and its getting to about 99% and then its getting the error 290: invalid command.
and now it only boots in the red, green, blue and white bootload screen.
heres some info if it helps:
SPL-1.42.HSPL on my hd2..
windows 7 home premium, (i tried running as admin, no difference.. also tried several other usb ports)
help would be appreciated!
thanks guys!
have you tried a good ol MTTY or Task29 before flashing?
does the phone boot to RGD screen?
what Radio you using?
And you have the phone HSPL unlocked?
dodgy download perhaps? tried another radio?
did anyone find the solution to this problem??
l have same problem not upload any rom and radio tryed everything same eroor %8 and error 290 l dont know what is problem
webiso said:
l have same problem not upload any rom and radio tryed everything same eroor %8 and error 290 l dont know what is problem
Click to expand...
Click to collapse
What exact ROM versions have you tried, and what SPL or HSPL do you have showing in bootloader? Also is there a radio currently on your HD2 and what is that radio if so?
normally phone hd2 leo and italy not t mobile ant spl 208 hardspl maked bootmode okay ( also write boot with jtag ) radio ver 2.15.50.14
webiso said:
l have same problem not upload any rom and radio tryed everything same eroor %8 and error 290 l dont know what is problem
Click to expand...
Click to collapse
I had the same problem. I was trying to restore my phone to original firmware, due to issues with custom firmwares. I had managed to extract the NBH from the installer provided by my carrier, and used CustomRUU to flash the phone, but the phone was not booting.
I then flashed one of the EnergyROM builds onto my phone.
After that I could not get the original firmware onto the phone, error 290 at 9%.
I booted my phone into the bootloader (red/blue/green), and used HSPL2 to set SPL to 1.42.HSPL. I could then flash the original firmware.
My phone is now working fine, as best I can tell.
Always showing bootloader screen with rom upgrade error
I was trying to revert to windows custom rom from android (due to frequent freezing) and then onwards booting the phone I am always getting the bootloader screen displaying rom upgrade error.
I tried hard reset but still the same problem persists, then I downgraded the HSPL 2.08 to SPL-1.42.HSPL and then tried reinstalling the custom rom but still the same problem persists. In between after downgrading the HSPL, I tried task 29, it was unsuccessful after 96% (shows Invalid Command (Error 290)), while reinstalling the customRUU I have, I got something like error 270 at the end (it goes fine till 100%).
I also tried with installing the radio (ver 2.15.50.14) in between but to no effect
Please help me in fixing the issue, my phone is of no use now
hy. i'm a newbie so plz escuze my mistakes and most of all my english.
i have a mda vario or htc wizard 200 as i know.
on the start screen,it shows
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.1
it's a G3 wizard. My problem is that it has the T-Mobile original german ROM and i want it in english. i have read most of the forums here and tried many ideas i found here but nothing helped me so far... i tried cid unlock with lokiwiz,it shows me that is unlocked but when i try to flahh it with the .exe flasher,downloaded Rom-s for it from here,it's not working. I have Win7 now and i tried with Windows mobile device center sync software for win7 and nothing,i tried in Win xp with activesync and nothing,the same simpthomes. It syncs,detects my ppc,i start the RUU,detects the Rom i have,but when i get to the flash window,just after it tells me that the flash process will take about 10 minutes,my ppc disconnects,enters in the bootloader mode,connection is lost and RUU ends with an error window that tells me that the memory could not be read.
My ppc is not sim locked,i can use whatever sim i want with it.
please help me,i am a desperate newbie. thanks.