is there a way to get into dial up mode so my modem will pop up in my device manager? i want to flash a prl but qpst and cdma workshop wont find the phone.
on the samsung moment 2.1 there is a option under wireless and network settings any help would be greatly appreciated.
sorry if this came up already.
Related
Well i have successfully unlocked and flashed to mighty ROM 6 but my Phone can not connect to the net using data i have searched all day for a good post on how to fix and maybe i am just slow or it isnt there anyway any help would bet greatly appreciated
i am getting error 67 and #777 will not connect
please and thank you
j
Did you put the right data settings in when programming (nam, etc) and are you sure they didn't revert? Mightyrom would change mine to @something.cn
That i am not sure of any help would be appreciated.
I was able to do my vogue to boost no problems this is driving me crazy lol
thanks for all help
What does it say when you :
##778#
Settings > system > update prl
##778#
What does it say when you :
##778#
It goes to view edit cancel then it wants an unlock code
UPDATE!!
Flashed back to sprint update prl then Viola everything works!!!
thanks all
Hey everyone,
After finally getting my S3 I wanted to check out some stuff in QPST, but I can't seem to get the phone to be properly recognized by the program.
I was able to use the dialer code *#7284# to get into PhoneUtil but I'm not exactly sure what to do from there. It won't let me set UART to modem and I'm not sure which option to set it to under "USB," but I was able to get the computer and QPST to recognize the phone as modem-serial thingy in a COM port.
QPST sees it but a question mark shows up under the phone column and I can't see anything for it in "service programming."
Thanks in advance!
Which version or company is you're gs3 from... I used ##3424# brought me to phone utl. chose first option cdma modem, I haven't tried qpst but read somewhere that 266v is the one to use.. I will update with you in a few to let you know if I was able to connect and read phone!
Use the debug + modem setting, you can read phone and get some info but Not the akey with cdma workshop. That is obtained another way...........
Thanks, this was before I tried CDMA Workshop, which actually works.
It would be nice getting it to work in QPST too, though...
Sent from my SPH-L710 using xda app-developers app
What version of CDMA Workshop did you use?
z4k said:
What version of CDMA Workshop did you use?
Click to expand...
Click to collapse
I'm on vacation so I can't go home and tell you and I don't remember, sorry.
Sent from my SPH-L710 using xda app-developers app
The only on I can get to recognize the Slll is QPST 2.7 Built 3.74 but when you try to read it, it stops in the middle of it and gives an error message.
cdma ws sees/reads, but i suspect the drivers arent correct because only limited functionality with that program
I was able to read the nv items 465, 466, 1192, and 1194 using efs browser in QPST 2.7 Build 378 setup on a Windows XP machine. Then I used CDMA Workshop 3.8.0 to change what I needed to change.
grimmace4 said:
I was able to read the nv items 465, 466, 1192, and 1194 using efs browser in QPST 2.7 Build 378 setup on a Windows XP machine. Then I used CDMA Workshop 3.8.0 to change what I needed to change.
Click to expand...
Click to collapse
not verizon though right? also, what settings did you have for usb? debug modem? ty
need help please! so on cdma workshop i did a nv items read from a galaxy s2 from sprint the range in dec from 0 to 4122 range in hex 0 to 101A then I wrote those nv items to my galaxy s3 now my signal goes on and off and cant make any calls please if someone can tell me what to do or if you can dump the memory on the nv items so i can restore my phone would highly appreciate it.
jbrolo said:
need help please! so on cdma workshop i did a nv items read from a galaxy s2 from sprint the range in dec from 0 to 4122 range in hex 0 to 101A then I wrote those nv items to my galaxy s3 now my signal goes on and off and cant make any calls please if someone can tell me what to do or if you can dump the memory on the nv items so i can restore my phone would highly appreciate it.
Click to expand...
Click to collapse
wouldnt that include the personal info? why didnt you backup that range before writing to it?
I know I was dumb for not doing that i did a backup on CW thinking that backup would include those files but tried to go back to that backup and still having the same issue signal goes on and off couple seconds after phone resets by itself unless i put it on airplane mode
Hello!
i have an DNA for use outside USA in cdma/evdo mode. I have everithing set but cant figureout how to insert mi carrier PRL.
Any help will be apreciated
Thanks.
What country? Cause prl is for CDMA NOT GSM(SIM CARD)
Sent from my SAMSUNG-SGH-I317 using xda premium
As i know, CDMA bands is LOCKED to Verizon.
Only the GSM bands are UNLOCKED .
Connect stock DNA to PC , pull fresh wmodem drivers installer out of its virtual cd , install em , dial ##3424# and youll have a diag port . Then you can upload any prl with qpst, dfs , workshop and so on.
simobk said:
I have an unlocked Droid DNA that I use on the canadian Fido network.
Everything works fine except calling *611. I get redirected to Verizon instead of Fido.
Click to expand...
Click to collapse
littlebo said:
Connect stock DNA to PC , pull fresh wmodem drivers installer out of its virtual cd , install em , dial ##3424# and youll have a diag port . Then you can upload any prl with qpst, dfs , workshop and so on.
Click to expand...
Click to collapse
Thanks littlebo,
OK, I went to IRC, asked the question multiple times, and finally got an answer from quite drunken cerjam1 who did try to help when not calling me names
According to him, it could be a PRL issue (I had to google it).
My question now is : Is PRL included in a ROM or is it lower in the architecture? Right now, I have Nos M7 rom installed, the VZW version. Would installing the GSM version, or another rom, fix it?
Otherwise, can anyone give me some hints on how to change the PRL to have Fido there?
Thanks,
Simo
I was wondering where my post disappeared. I suppose a mod moved it here. I added a little quote from the original post for some context.
Also, since the last post, I installed UKN DNA 1.3.0. Still the same problem.
Also FYI, I had already searched the forums and found this post. Unfortunately, after the ##3424#, I get USSD code running... followed by Connection problem or invalid MMI code.
I do have the right drivers and can communicate with the phone using ADB.
Hi,
I have just return from US and I got a LG Leon from MetroPCS to sty connected while there. Now that I am back I unlocked the phone via unlock app. My surprise came when I put me Spanish SIM card (Jazztel) and the phone only gets 2g connection. I have been searching the net and I found some threads on the topic but I can not make any of them work on my phone. First I tried changing the radio to Europe mode through *#*#4636#*#*, and I enter the test page but when I click the phone info button I get a message that states that I can not run that application on this device. I thought it was because I wasn't root so I rooted it. But before I could root I had to downgrade by flashing an older firmware. No way, I get the same message. I tried the hidden menu to see if I could find an entry to change the radio mode, or any type of LTE configuration. Hidden menu on my phone though 277634#*#. I also tried the anycut option, but I do not get any facility called LTE configuration or similar.
I am desperate and I do not know how to proceed. Any help is welcome
Thanks in advance
Hi all,
I am trying to remove the network lock on an S3. I can get into the service menu, but there is no UMTS option as so many guides say there is. I saw another post that said that the service menu is a wrapper for whatever modem is flashed to the phone. Does anyone know of a modem I can flash to the phone that will give me access to the UMTS menu?
Thank you.