Hi guys,
I figured I'll post again here since I think I bricked my phone.... I was trying to install Eugene's Vibrant6.zip and I got stuck on the Vibrant Logo with Samsung at the bottom. I tried to reset with both volume buttons and power button and got to grey battery and nothing else...
What I did prior to this was I formatted system and data on the recovery screen as per some posts here and it would just boot into a loop. Windows won't recognize a device and it just shows grey battery image and it doesn't seem to be charging. Anyone can help me?
EDIT:
Out and in the battery, plugged in to USB and it just loads the battery image and it's all grey color as if fully discharged and just stuck on it. Device is also not found in my system so I can't do any adb commands. If I just reset it without the cable it would just sit on the Samsung boot loop. Anything I can do?
UPDATE: Ok, some good news! I heard the sound as it connected via USB, I can see the 2 drives, but they read as Removable Disk and I can't access them...
adb reboot recovery or download
error: device not found
What if simply format the drives via Windows right click menu? Will that do any good or bad? What are my options here? Any help will be appreciated!
UPDATE: Well... looks like this is pretty much a dead phone.... I right clicked and selected Format in My Computer and it just says There is no disk in Driver F: Insert a disk and try again.
Can I a mount an image somehow via MagicISO? Or is there something simpler that I just can't figure out?
Again, thanks for your help!
Thanks.
Has anyone experienced this or am I the only one?
M5devil said:
Has anyone experienced this or am I the only one?
Click to expand...
Click to collapse
Sorry I have never heard of this or witnessed it while flashing anything to my device. Obviously the battery screen signifies that the phone is off but is in charging mode and hitting the power button will boot the device up. (I'm sure you already know of this). Never heard of it being stuck at that screen after flashing. Hopefully you can get this solved soon. Good luck
M5devil said:
Hi guys,
I figured I'll post again here since I think I bricked my phone.... I was trying to install Eugene's Vibrant6.zip and I got stuck on the Vibrant Logo with Samsung at the bottom. I tried to reset with both volume buttons and power button and got to grey battery and nothing else...
What I did prior to this was I formatted system and data on the recovery screen as per some posts here and it would just boot into a loop. Windows won't recognize a device and it just shows grey battery image and it doesn't seem to be charging. Anyone can help me?
EDIT:
Out and in the battery, plugged in to USB and it just loads the battery image and it's all grey color as if fully discharged and just stuck on it. Device is also not found in my system so I can't do any adb commands. If I just reset it without the cable it would just sit on the Samsung boot loop. Anything I can do?
UPDATE: Ok, some good news! I heard the sound as it connected via USB, I can see the 2 drives, but they read as Removable Disk and I can't access them...
adb reboot recovery or download
error: device not found
What if simply format the drives via Windows right click menu? Will that do any good or bad? What are my options here? Any help will be appreciated!
UPDATE: Well... looks like this is pretty much a dead phone.... I right clicked and selected Format in My Computer and it just says There is no disk in Driver F: Insert a disk and try again.
Can I a mount an image somehow via MagicISO? Or is there something simpler that I just can't figure out?
Again, thanks for your help!
Thanks.
Click to expand...
Click to collapse
Slow down for a second. Your phone is definitely not bricked. Ive been over the edge, and been able to bring my phone back to life.
To clarify, you flashed vibrant6.zip through clockwork mod, and then the phone got stuck on the samsung S? How long did you let it sit there?
It sounds like just your ROM is messed up.
Are you able to "get into recovery"? Holding both volume buttons while you power on the phone, without it being plugged into usb.
Do you have Odin? And have you ever used it?
Its totally frustrating when your phone gets messed up and you don't know what to do.
I flashed the stock ROM via Odin and then wanted to install Vibrant6.zip. For that I entered into a recovery mode via Clockwork and as someone in the other thread advised, I formatted system and also data, don't recall exactly. Then it looped to a standard recovery mode and I just rebooted the phone. This is where it got stuck... Vibrant in the center and Samsung at the bottom of the screen. To test it I left it like that from night till this morning. In the morning I woke up it was on the same boot screen.
Before that at night, after seeing it hand at the boot, I held both volume keys and power, waited for it to reboot, and immediately it showed a circular progress bar, but not moving just highlighted the 12 o'clock bar and second later I see the battery image all in gray and nothing else. It just sits on that grey static image without actually charging it (no green section or flashing dots)
Boot logo only appears if I am trying to reset without the USB cable. On the boot loop I plug in the cable and I hear the USB connecting it, I see the 2 Removable disks, but both inaccessible and adb commands don't recognize the device.
Very weird, as in turned off mode it's not charging at all.. just shows this grey battery image with a circle progress froze on 12 o'clock bar.
That's pretty much it.... I was never able to enter into recovery nor download via the buttons. It would just always reboot into this grey battery screen....
Completely helpless.... I did order a new battery from TMO, maybe the battery is fried and that's why it's not charging and just sits on this stupid static grey battery screen.
ArbitrageMan said:
It sounds like just your ROM is messed up.
Are you able to "get into recovery"? Holding both volume buttons while you power on the phone, without it being plugged into usb.
Do you have Odin? And have you ever used it?
Its totally frustrating when your phone gets messed up and you don't know what to do.
Click to expand...
Click to collapse
Holding both volume keys and releasing power once screen goes blank, only show Vibrant logo again... I have tried this a million times
With USB cable it shows grey battery screen, without the cable just a Vibrant boot loop...
I'm assuming that you have the Samsung drivers installed.
Try the following steps:
Take out the battery and then put it back in but don't turn the phone on.
Plug it via USB.. does anything show up on the screen?
zephiK said:
I'm assuming that you have the Samsung drivers installed.
Try the following steps:
Take out the battery and then put it back in but don't turn the phone on.
Plug it via USB.. does anything show up on the screen?
Click to expand...
Click to collapse
Yes, I have the drivers installed as I was able to locate my device and use adb commands to enter into recovery and download. Also Kies worked.
Doing what you asked simply load the grey battery image and nothing else with a progress bar not spinning. Just sort of hangs on this image and that's all.
Booting without the USB cable loads the Vibrant boot loop. Connecting USB at this boot loop state, would play a sound as if it connected to my windows, but I can only see Removable disks that are inaccessible and adb doesn't find the device...
Very strange.... trying to use the button keys to enter into recovery or download is no use, as that just won't ever happen, even when phone was working fine.
Any other suggestions? I would return the phone for replacement... but I am not sure how it would look with all the files still on the internal disk including root if I am not mistaken... I had only few hours of sleep because of this headache
M5devil said:
Yes, I have the drivers installed as I was able to locate my device and use adb commands to enter into recovery and download. Also Kies worked.
Doing what you asked simply load the grey battery image and nothing else with a progress bar not spinning. Just sort of hangs on this image and that's all.
Booting without the USB cable loads the Vibrant boot loop. Connecting USB at this boot loop state, would play a sound as if it connected to my windows, but I can only see Removable disks that are inaccessible and adb doesn't find the device...
Very strange.... trying to use the button keys to enter into recovery or download is no use, as that just won't ever happen, even when phone was working fine.
Any other suggestions? I would return the phone for replacement... but I am not sure how it would look with all the files still on the internal disk including root if I am not mistaken... I had only few hours of sleep because of this headache
Click to expand...
Click to collapse
Are you sure that you're doing the right things to get to download? I've been in this situation and I wasn't able to get into recovery but I was able to get back into download mode.
I believe if you return it back and they find out it was rooted, they will charge you for it. If not, it'll appear on your bill.
I'm sure that you're doing the wrong things to get into download mode. If something is appearing on your screen it is a soft-brick and you're not bricked.
1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen (powers on its own when plugged in)
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
Click to expand...
Click to collapse
A tip to get into download mode is to put the phone HORIZONTALLY (sideways) and it will make it a lot easier.
I am pretty much positive about it. I know a lot of people can easily enter into recovery or download modes, but I know many can't and I am one of them. It would just load the grey battery image instantly as I let go of the power button.
1. Take out battery, put it back in. (to turn the phone fully off) DONE
2. Don't turn it the phone on! DONE
3. Plug the phone into your PC, do not hit the power button! DONE
4. See if the phone shows anything on the screen (powers on its own when plugged in) FIRST THING THAT APPEARS IS A CIRCULAR PROGRESS BAR THAT CHANGES TO A GREY BATTERY IMAGE WITH A BAR IN THE MIDDLE OF IT. STATIC IMAGE, NOTHING ELSE.
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons. DONE
6. Hold the power button as well as the volume buttons until the screen goes black. DONE
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons! DONE
THE STUPID GREY COLOR BATTERY IMAGE APPEARS AS BEFORE....
I'm thinking maybe battery is fried and that's why the grey color screen appears and not the usual screen where you see the battery charging...
After reading this thread it's clear that my handset is one of the new ones that have recovery/download modes disabled via the volume+power buttons.
So that pretty much covers it... I hope TMO will not ***** about the files that are on the internal sd that I am unable to access and remove... unless anyone else has any fresh ideals how to gain access to the disk
I think I might have a similar problem.
I accidentally deleted the touchwiz framework so I can't do anything ON the phone. It boots up, and gets me to the lock screen. As soon as I unlock, I am greeted with dozens of unending force closes.
I can get into both download and recovery mode, however, I have not been able to get ADB to recognize the device. I am attempting to push the stock ROM to the internal memory to flash over everything.
I'm not sure what to do to get ADB to work but it's driving me nuts!
Stuck at vibrant? I have a fix
Check out android Dev Section... I figured out how to access download mode or stock recovery mode when you are stuck at the vibrant screen!!!! BACK IN BUSINESS VIBRANT OWNERS!!!
i got the same problem and nothing seems to work
Try this out http://forum.xda-developers.com/showthread.php?t=1103706
Feels like I'm having same issues..
the previous post requires opening the phone and I don't have tools for that..
Here's my issue.
I can't get into Recovery or Download and computer won't see phone to Odin.
I've got drivers installed and AIO Toolbox as well as ADB(which won't work because of computer not seeing phone.
Using the manual option(vol+ vol- power), nothing works.
I've done all the tricks like unplug it then hold vol keys plug it insert battery..
When I do plug in the phone to to even just get a charge in it goes the the battery, but my is is frozen or something. doesn't turn green or have a charging animation. After about a minute or so it was start up and boot loop. I read something about a bad battery? I've got two of them and they seemed fine before..
Before all this I had to Odin and go to stock. I was attempting to get ics back but I was being lazy and trying to do as little as possible..bad idea. I was following slim ics install and flashed cm9 daily, slimics and commons..and now this..
I'm not sure what to do..I usually search around xda or google..10 hours later.. idk..Anyone able to give help please?
:crying:
eduardo_reflex said:
i got the same problem and nothing seems to work
Click to expand...
Click to collapse
... do i even have to say it?
droyd666 said:
Try this out http://forum.xda-developers.com/showthread.php?t=1103706
Click to expand...
Click to collapse
this problem is most likely solved. After 2 years!
mylostlonelysoul said:
Feels like I'm having same issues..
the previous post requires opening the phone and I don't have tools for that..
Here's my issue.
I can't get into Recovery or Download and computer won't see phone to Odin.
I've got drivers installed and AIO Toolbox as well as ADB(which won't work because of computer not seeing phone.
Using the manual option(vol+ vol- power), nothing works.
I've done all the tricks like unplug it then hold vol keys plug it insert battery..
When I do plug in the phone to to even just get a charge in it goes the the battery, but my is is frozen or something. doesn't turn green or have a charging animation. After about a minute or so it was start up and boot loop. I read something about a bad battery? I've got two of them and they seemed fine before..
Before all this I had to Odin and go to stock. I was attempting to get ics back but I was being lazy and trying to do as little as possible..bad idea. I was following slim ics install and flashed cm9 daily, slimics and commons..and now this..
I'm not sure what to do..I usually search around xda or google..10 hours later.. idk..Anyone able to give help please?
:crying:
Click to expand...
Click to collapse
Try asking another question. But I suggest using a USB jig. They usually work. Then odin
Sent from Mount Olympus via Hermes
Did you ever get it fixed man? I literally did the very same to mine a while back and It works like butter as we speak. It is fixable with a mini-usb jig or dongle. You can make your own with about $3 worth of parts from radio shack but I recommend buying one, it will be easier. I for the record made mine simply twisting together the resistors and though it was tough to touch the right pins it did eventually work and get me back into download mode.
Hopefully you already got it fixed though. If not I can help you out.
Related
Well, after spending almost 11 hours trying to boot into recovery or download, I know for sure that there is something going on with my phone re: hardware locked. The date on my box is 7-16. It is an early Vibrant. But no matter what I do, I cannot get into download or recovery which means my ****ing phone is literally worthless.
I have tried all possible thousands of combination's of buttons, batteries, and cords while booting and nothing happens.
The Vibrant logo shows, then it shows the pink, annoying as hell T-mobile logo, than goes to the Galaxy S logo which loads for a little bit and then just leads me to a black screen. Eventually the 4 buttons on the front of the phone turn on and then nothing else happens. It will just sit like this forever.
I know all I need to do is get a working ROM loaded but it is literally impossible to do so.
Can anyone offer any suggestions? Or are anyone else having the same problem?
I guess the only way I can get a working phone is to get in touch with T-mobile and do a Warranty exchange. That's a damn shame too, because I will be without a working phone for a week.
What about using adb?
adb reboot recovery -or- adb reboot download ?
I had a hw locked vibrant, never tried the adb reboot download, recovery did work.. I added another line on my account last night for somone, who got a vibrant, theirs wasn't hw locked, so I traded 'em ;P
Agree with the above poster I have been stuck on the vibrant screen or dark screen and adb still worked to save me
when i try to use adb, it just tells me that it cant find the device. i'm not able to boot into android OS at all.... screen just hangs. so my computer is never getting a chance to see my phone hence why i cant use adb to reboot it into recovery or download.
I believe your device has to go into recovery mode then check with and devices and if you see a device I THINK it is and reboot download, I am 90% certain
Sent from my SGH-T959 using Tapatalk
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
98classic said:
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
Click to expand...
Click to collapse
i do believe i have the correct drivers installed. i was able to use adb to run lagfixes before i was having this problem. when i boot my phone, i get a sound from my computer saying that it recognizes a usb device. the two drives in the vibrant show up in My Computer but i cannot access them as windows says they are not accessable at the moment.
at what point will adb be able to recognize my phone when booting? no matter what i do when i try adb shell i get error: device not found
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Same problem here. I probably just have to sell it fast on ebay or something. Hopefully some kind of fix starts by the end of the week. First phone in my smartphone life to brick from a simple Voodoo lag fix. Please XDA gods find a solution.
crazycaveman said:
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Click to expand...
Click to collapse
nope, no go. adb will not recognize my device no matter what. and the device isnt loading the OS so i cannot turn debugging on. i guess this is a real "brick" then.
This sounds like a rant rather than a question. Just sayin'.
DKYang said:
This sounds like a rant rather than a question. Just sayin'.
Click to expand...
Click to collapse
fixed that. my bad.
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
renocivik said:
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
Click to expand...
Click to collapse
thanks for the suggestion. i found your thread and went through the steps in the OP... still no luck. no matter what i do, i cannot get passed the black screen the loads after the galaxy s logo. i also cannot get into download mode or recovery no matter what combination of button presses i use.
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
core99 said:
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
Click to expand...
Click to collapse
this isnt working either. :-(
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
atoz350 said:
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
Click to expand...
Click to collapse
this is exactly the method i want to try. but unfortunately i cannot get the phone into recovery or download mode. i have tried at least 100 times now with many different combination's of plugging the usb cord in and pressing the volume and power buttons.
two ideas: one, is it possible that i wiped recovery and download mode from my phone on accident? the reason why i ask is that i was super tired and flashing roms and kernels to my phone. i flashed back to my original stock rom and then i flashed the kernel. for some reason, i selected wipe date/cache in Rom Manager before flashing the kernel. i have no idea why i did this. seriously. totally noob move. so im assuming i have a kernel flashed but now there is no ROM installed for the phone to boot into.
two, if above is not the issue, than im going to assume that the phone is not recognizing any button presses while its off, so when i turn it on it just recognizes that the power was pressed and ignores the volume presses, thus not booting the phone into recovery or download.
edit: i should mention again that at no time does adb recognize my device. so i cannot use adb to reboot the phone into the mode i need.
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
byt3b0mb said:
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
Click to expand...
Click to collapse
I understand what you mean. I appreciate your criticism of my original post. Let me say that I wrote it while frustrated. But I know that isn't an excuse.
The device is fantastic. I know that I did this to it myself. It's unfortunate.
Anyways, I received a replacement phone. I will be more careful this time.
I was putting the new update on and Odin was doing its thing. it went black now I got the stupid screen of a phone pic a yellow triangle and a computer. I know my phone is hardware locked what can I do? I rooted it with the one click root but no rom was installed.
Do you have adb running? You do know there was a fix for hardware locked vibrants, right?
If you have adb running & your phone can be seen by your pc it might be possible to get the sbl file pushed in to flash. Not sure it would work this way but it might be worth a shot. Not to sure what commands you would need either.
All~G1 said:
Do you have adb running? You do know there was a fix for hardware locked vibrants, right?
If you have adb running & your phone can be seen by your pc it might be possible to get the sbl file pushed in to flash. Not sure it would work this way but it might be worth a shot. Not to sure what commands you would need either.
Click to expand...
Click to collapse
no computer does not see the phone. I used terminal to get into download mode.
What is the fix for the hardware lock?
nomadrider123 said:
no computer does not see the phone. I used terminal to get into download mode.
What is the fix for the hardware lock?
Click to expand...
Click to collapse
Do you not know how to search? God...
http://forum.xda-developers.com/showthread.php?t=804305
Master™ said:
Do you not know how to search? God...
http://forum.xda-developers.com/showthread.php?t=804305
Click to expand...
Click to collapse
I did search and search on hardware locked and bricked phones. My first post was about all I see is the phone, yellow triangle and the computer icons. I pulled the battery hold the volume up and down both put the battery in plugged in the usb cord and It goes right to the symbols of the phone, yellow triangle and the computer. Odin does not see my phone sorry but I have studied for hours how to root and do several things to my vibrant by myself. This has me stumped and looking for help.
nomadrider123 said:
I was putting the new update on and Odin was doing its thing. it went black now I got the stupid screen of a phone pic a yellow triangle and a computer. I know my phone is hardware locked what can I do? I rooted it with the one click root but no rom was installed.
Click to expand...
Click to collapse
I know my phone is hardware locked what can I do?
Nothing. The 3-button fix should have been applied prior to flashing anything! You need a new phone, unless somehow, magically, after searching these forums and trying the (at least) 20+ ways people claim to get into download mode work.
None have worked on mine.
im not asking if ODIN can see your phone. I was asking if ADB sees your phone...
Do you have ADB setup? if so, what happens when you type:
adb remount
If you do have adb setup and nothing happens then you are in the same boat as southplatte.
get the samsung captivate back to download mode
I have similar problem like that. When i use Odin3 one click flash the ROM. It stuck in the middle of flash. I take off the usb cable out ,try to reboot the phone. Oop .. the screen show the sign of the phone--- yellow triangle with exclamation sign in the middle---computer icon. Can do nothing with it, because the computer now can not connect with the phone.
In my case, I take the USB off the phone but still connect with the computer. Hold the volume button + power until the phone flash in black screen .This moment happen very quick ,it will go back to the unconnected sign again. When the screen turn black just release power button but still press volume button (otherwise it not working) hook the USB back in your phone right on that moment. The Phone go back to download mode. If not work try couple time ,important is timing right on the moment the flash to black screen .
Now ,you can use the odin3 flash the ROM again. It works for me ,and i try again same situation couple times. it really works.
hopefully, this will help for who got the same problem.
get the samsung captivate back to download mode
I have similar problem like that. When i use Odin3 one click flash the ROM. It stuck in the middle of flash. I take off the usb cable out ,try to reboot the phone. Oop .. the screen show the sign of the phone--- yellow triangle with exclamation sign in the middle---computer icon. Can do nothing with it, because the computer now can not connect with the phone.
In my case, I take the USB off the phone but still connect with the computer. Hold the volume button + power until the phone flash in black screen .This moment happen very quick ,it will go back to the unconnected sign again. When the screen turn black just release power button but still press volume button (otherwise it not working) hook the USB back in your phone right on that moment. The Phone go back to download mode. If not work try couple time ,important is timing right on the moment the flash to black screen .
Now ,you can use the odin3 flash the ROM again. It works for me ,and i try again same situation couple times. it really works.
hopefully, this will help for who got the same problem.
Thank you Tudo525..... That worked. Appreciate it. I have been stuck here for hours.
hello tudo
just can not do what you describe
when I have the phone-yellow exclam-computer picture, i press volume up and power, wait for 3-4 seconds, screen turns black and I release the power button and plug the usb?
JayJayaa said:
hello tudo
just can not do what you describe
when I have the phone-yellow exclam-computer picture, i press volume up and power, wait for 3-4 seconds, screen turns black and I release the power button and plug the usb?
Click to expand...
Click to collapse
No no! Hold vol up/down, not power...
Sent from my SGH-T959 using XDA App
Pull the battery, sim, memory card. Plug the usb. Hold volume up and down and while holding those two buttons put the battery back and it should get you in downloading.
Sent from my SGH-T959 using Tapatalk
Alex9090 said:
Pull the battery, sim, memory card. Plug the usb. Hold volume up and down and while holding those two buttons put the battery back and it should get you in downloading.
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Omg Thank You! you just saved me 2hrs. Try this method if you guys get the triangle sign. It works!
Same issue...
Galaxy S 4g Tmobile - tried pulling all cards and battery and 3-button trick but to no avail. Never enters downloading mode. How can I tell if I'm fully bricked?
Dharra, youre in the wrong forum altogether
OP, try a jig. If that doesnt get you into download.mode, listen very carefully: youre ****ed.
Your only remaining options will be to send it to someone with a riff box (pm connexions2005 or go to mobiletechvideos.com) or do the unbrickable mod and run the unbricking app.
If you do fix your phone, do the hw lock fix right ****ing away!!
Sent from a cell tower to the XDA server to you.
tudo525 said:
I have similar problem like that. When i use Odin3 one click flash the ROM. It stuck in the middle of flash. I take off the usb cable out ,try to reboot the phone. Oop .. the screen show the sign of the phone--- yellow triangle with exclamation sign in the middle---computer icon. Can do nothing with it, because the computer now can not connect with the phone.
In my case, I take the USB off the phone but still connect with the computer. Hold the volume button + power until the phone flash in black screen .This moment happen very quick ,it will go back to the unconnected sign again. When the screen turn black just release power button but still press volume button (otherwise it not working) hook the USB back in your phone right on that moment. The Phone go back to download mode. If not work try couple time ,important is timing right on the moment the flash to black screen .
Now ,you can use the odin3 flash the ROM again. It works for me ,and i try again same situation couple times. it really works.
hopefully, this will help for who got the same problem.
Click to expand...
Click to collapse
Oh thank you thank you thank you Tudo525!!! You've saved my phone!! I was trying to upgrade my brand new Galaxy S2 HD LTE through Kies and it froze just like your problem. I did what you suggested and it worked perfectly!! Now I have my phone back!! Thank you!!!!!!!!!!!!!!!!!
The Same Happened I Did what u said with ODIN 3 ... but my phone Continuously restarts with in a minute interval ... Please Hep !!!
The PDA I used is CF-Root-XW_OXX_JV1-v1.3-BusyBox-1.17.1.tar.
Samsung Galaxy S ... 2.3.3 DDJV6
...
Seenu AndhraPradesh !
...
Thanks In Advance !
---------- Post added 11th February 2012 at 12:33 AM ---------- Previous post was 10th February 2012 at 11:56 PM ----------
The Restarts Too Stopped The Same I Did With CF-Root-XX_OXA_JVO-v3.2-CWM3RFS
Thanks Everyone ..!
Everyone Smiles When The Problem Comes To An End !!!
...
i9000 2.3.3 DDJV6
Seenu , AndhraPradesh
...
hello,
need help,
i also have display on my screen (cellphone)...(!)...(PC).
i tried the battery pull and plug in the usb and holding the vol- vol + buttons. still get the same thing. i also tried the holding the all 3 buttons (power) untill the screen went blank then release and plugged in the usb. no change.
i do get a chime on my windows xp that usb is connected but nothing shows up
also odin does shoes connected (comm XXX) but every time i try to re flash it just sits there on the "initialization"
what can i do?
What bootloader do you have? If GB press vol down and power together then plug in USB.
I'm trying to load the Unofficial 2.2 ROM onto my phone and I'm using the Odin method. I got into Download mode, got the pit and the ROM and put it all in place, the process starts but it just keeps getting stuck at "Do not turn off the Target." Now if I restart it, it won't even go into my phone.
Any suggestions why it keeps stopping at that point?
Q and A section
ferhanmm said:
I'm trying to load the Unofficial 2.2 ROM onto my phone and I'm using the Odin method. I got into Download mode, got the pit and the ROM and put it all in place, the process starts but it just keeps getting stuck at "Do not turn off the Target." Now if I restart it, it won't even go into my phone.
Any suggestions why it keeps stopping at that point?
Click to expand...
Click to collapse
My advice is to repost this question in the Q and A section and then edit your OP, to indicate you've done as much... Add a link in THIS OP to your Q and A thread. You should get some help after that i'm sure.
does you phone just sit at a black screen? mine did the same thing black screen to where i doesnt look like its on but if you turn the lights off in the room your in you will see the screen is actually lit! no idea on how to fix this myself... on mine if you press and hold the vol up, vol down, and power buttons for a while, (until your fingers hurt) you will eventually see a black screen with red writing with some stuff i was unable to understand! but thats all i could get out of the phone... called t-mobile and they sent a replacement... but i would like to know what i did wrong because i will be flashing froyo alot and i dont want to run into this problem again... btw can get odin to recognize the phone at all!
If your phone is not Hardkey locked.
1) Remove battery from phone and put it back in again
2) Plug your USB into your computer (and make sure it is not in your phone yet)
3) Push and hold down your two volume keys (DO NOT HOLD DOWN THE POWER BUTTON)
4) Plug in the USB cable into your phone
This takes me into Download every time. I did what you did. I had problem with Odin my phone and it just got stuck. I unplugged the phone and rebooted it. Or I should say I tried. It was dead to the world. Black screen. Power button did not start etc. Ran into a note from Kazer and he suggested the above procedure and it worked every time for me. Holding down the power button did not work for me.
Try it out and let me know if it worked.
OK, here the story. My SGS2 started acting up a few days ago, it thinks it's charging all the time now. I searched and found that this seems to be a common problem with the port, so I cleaned the contacts on the microUSB connector, but it's not helping. I decided today that I'll just take it in since it's still under warranty, and I'd like to do it after work today since I live almost an hour away from the AT&T Store near the hospital. Problem was, I'm running AOKP on it and I don't have access to a computer with Odin on it where I can restore it to stock. Then I find the thread that details how I can download the .tar file and flash on the phone with Mobile Odin. Seems to work great, but it goes into a bootloop afterwards. One member posted that he had the same problem, but it was solved by booting into recovery and doing a full wipe. Here's where I have a problem now.
I can only boot into Odin mode, and it gives me the choice where it's asking me if I'm sure I want to load a custom binary or cancel and reboot. When I click that I want to load the binary, I get to the Odin mode screen; it reads
Custom Binary Download: No
Current Binary: Samsung Official
Downloading...
Do not turn off target!!
That's it. If I reboot normal, it goes into bootloop. Otherwise, it sits there with the battery logo showing, whether it's plugged in or not.
I'm pretty sure when I get home tonight, I can plug it in and get something going on my desktop, but I'd like to hit up the store before I head home. Anyone got any ideas or suggestions?
If you can't boot into recovery using the three button method, I'm not aware of any way to put it into recovery mode without a computer. You didn't say, but I assume you used vol+, vol-, & pwr?
creepyncrawly said:
If you can't boot into recovery using the three button method, I'm not aware of any way to put it into recovery mode without a computer. You didn't say, but I assume you used vol+, vol-, & pwr?
Click to expand...
Click to collapse
Yup, and that's what comes up. I'm thinking it has something to do with the fact that the phone thinks it's plugged in. I guess I'll just have to plug it in my desktop when I get home and work on it from there. Worst case scenario is that I just take it to AT&T tomorrow as it is, tell them about the false charging problem, and when I tried to do factory reset to see if it would fix things, this is where it's stuck.
I can't believe I spent the first 30 years of my life without a cell phone and now I don't feel right if it won't work for a day or two.
creepyncrawly said:
If you can't boot into recovery using the three button method, I'm not aware of any way to put it into recovery mode without a computer. You didn't say, but I assume you used vol+, vol-, & pwr?
Click to expand...
Click to collapse
I'm having the same problem after trying to install S-Voice. You indicate that there is a way to get into recover using a computer. Can you explain?
Thanks.
drjim said:
I'm having the same problem after trying to install S-Voice. You indicate that there is a way to get into recover using a computer. Can you explain?
Thanks.
Click to expand...
Click to collapse
need adb.
adb reboot recovery
Google
Update:
I actually managed to catch it when it didn't think it was plugged in and do full wipe. It worked after that, sorta. It didn't think it was plugged in all the time, but it was still real funky; like the power usage curve started high, had a sudden big drop, then went up from there. Plus, when it was off, it would flash between a grey battery with a circle and a green on, back and forth. And I couldn't power it on unless it was plugged in. Once I showed them that, AT&T gave me a new SGS2. It's rocking Shostock2 now, so problem solved.
My samsung vibrant running 4.0.4 ICS zenwich 1.8.4 randomly shut off today, not even able to turn on, it was the Sleep of Death I have got before, so i pulled battery and reboot, still nothing.
The phone now boots, but their is no display
The phone will literally turn on, have the 4 buttons light up on the bottom, have the screen be responsive to touches, but the physical display is off
I can unlock my phone by swiping, hear the volume up sound, even dial calls by blind touching. It is the same idea as a PC that is plugged in, just so VGA cable to the monitor.
I have tried rebooting to recovery, download mode and tried to heimdall, but it never finds my device, i tried to sdk in and reboot to download mode via cmd prompt but no luck finding device too
I am all out of ideas and nothing is seems to be working
Any advice on resolving this issue would be appreciated
wafflebroski said:
My samsung vibrant running 4.0.4 ICS zenwich 1.8.4 randomly shut off today, not even able to turn on, it was the Sleep of Death I have got before, so i pulled battery and reboot, still nothing.
The phone now boots, but their is no display
The phone will literally turn on, have the 4 buttons light up on the bottom, have the screen be responsive to touches, but the physical display is off
I can unlock my phone by swiping, hear the volume up sound, even dial calls by blind touching. It is the same idea as a PC that is plugged in, just so VGA cable to the monitor.
I have tried rebooting to recovery, download mode and tried to heimdall, but it never finds my device, i tried to sdk in and reboot to download mode via cmd prompt but no luck finding device too
I am all out of ideas and nothing is seems to be working
Any advice on resolving this issue would be appreciated
Click to expand...
Click to collapse
Device Manager show anything is plugged in?
FaultException said:
Device Manager show anything is plugged in?
Click to expand...
Click to collapse
Yes, It shows up as the linusb winusb t-959 but neither heimdall or android sdk find the device.
wafflebroski said:
Yes, It shows up as the linusb winusb t-959 but neither heimdall or android sdk find the device.
Click to expand...
Click to collapse
So were you able to get into Download Mode at all? And if so was the display on then?
FaultException said:
So were you able to get into Download Mode at all? And if so was the display on then?
Click to expand...
Click to collapse
i think it did because it wasnt at a lock screen, and when i touched the soft buttons they would light up, but the phone wasnt in an OS.
the screen was still off though, I can't get anything to make it turn on
wafflebroski said:
i think it did because it wasnt at a lock screen, and when i touched the soft buttons they would light up, but the phone wasnt in an OS.
the screen was still off though, I can't get anything to make it turn on
Click to expand...
Click to collapse
What method did you use to get into Download Mode?
FaultException said:
What method did you use to get into Download Mode?
Click to expand...
Click to collapse
take battery out, hold vol + and - and power button, put battery in while usb connected
wafflebroski said:
take battery out, hold vol + and - and power button, put battery in while usb connected
Click to expand...
Click to collapse
You may've gotten into recovery, I can't really get into download mode like that. Try this:
Unplug USB & remove battery
Insert battery but do not power on.
Hold VOL-UP + VOL-DOWN
Insert USB and wait a few seconds, while still holding them
FaultException said:
You may've gotten into recovery, I can't really get into download mode like that. Try this:
Unplug USB & remove battery
Insert battery but do not power on.
Hold VOL-UP + VOL-DOWN
Insert USB and wait a few seconds, while still holding them
Click to expand...
Click to collapse
Ok that works, I'm defineatly in download mode, the device shows up in ODIN, but not heimdall. I am not familiar with ODIN, how would I go about flashing the ICS zen rom? I found a tutorial to flash back to stock ROM and wipe all data, but I would like to be able to just reflash the ICS rom
wafflebroski said:
Ok that works, I'm defineatly in download mode, the device shows up in ODIN, but not heimdall. I am not familiar with ODIN, how would I go about flashing the ICS zen rom? I found a tutorial to flash back to stock ROM and wipe all data, but I would like to be able to just reflash the ICS rom
Click to expand...
Click to collapse
Ok, so it shows the download mode on the screen of the phone?
If so, that's good news and means your screen is not shot.
Try to get Heimdall to work. Are you in windows? Then you'll need to uninstall the samsung drivers and do this (from CM update guide):
CM update guide said:
1. Run the included zadig.exe in the drivers folder of the Heimdall Suite.
2. From the menu, choose Options » List All Devices.
3. From the drop down, select Samsung USB Composite Device or Gadget Serial.
4. Click Install Driver.
NOTE: A prompt may appear warning that the installer is unable to verify the publisher of the driver. Ignore it and select "Install this driver anyway."
5. Heimdall can now be used safely on the Windows computer.
Click to expand...
Click to collapse
Once heimdall is running, try grabbing the boot.img out of the zen zip and do this:
Code:
heimdall flash --kernel boot.img
See if anything comes of that.
The screen never turned on.. it just went into download mode and i was able to see from ODIN that it was recognized. So i ODIN'd back to stock rom, i heard the phone reboot, but still no display.
Like before the phone's screen is 100% responsive, i can unlock the phone, hear the usb plugging in noise, just no display. It just blows my mind because the screen works but its not on.. I am very confused
wafflebroski said:
The screen never turned on.. it just went into download mode and i was able to see from ODIN that it was recognized. So i ODIN'd back to stock rom, i heard the phone reboot, but still no display.
Like before the phone's screen is 100% responsive, i can unlock the phone, hear the usb plugging in noise, just no display. It just blows my mind because the screen works but its not on.. I am very confused
Click to expand...
Click to collapse
That's not good. Your phone might be done for then. I once repartitioned with no partition files and still download mode worked on a fresh battery pull.
Maybe try leaving the battery out for a while and see if it fixes itself, since it seems to be an electronics problem, maybe something needs time to reset or something.
Sent from my SGH-T959 using xda premium
Yea I've had the battery out for over 30 mins and nothing. I even opened up my phone last night to check all the ribbon wires and connections, everything looked fine and i removed the motherboard & replugged everything in.. still no luck
it's a good thing my contract is up I think I am going to get the samsung galaxy s 3..
RIP vibrant best phone i ever had, I'm surprised it lasted this long with all the mods I had done to it haha
my xt890 lcd screen and digitizer were broken so i changed them and the phone was working fine for a week, i then wanted to update to kitkat through oem update; everytime i tried it would give me error . i then read that since i unlocked bootloader and rooted my phone and installed cwm recovery i couldnt do an oem update and i had to do a factory reset in order to update through oem, so i did just that ; after the phone finished factory reset and booted i proceeded with oem update while the phone was charging, everything was going fine the file was downloading, i went to the bathroom and came back the display was black, but touch screen was working fine...through more searching i read that this could be from the update, and i should do another reset... since i couldnt see anything even recovery menu. i downloaded moborobo so i can see my screen on pc and proceeded to factory reset ... now i cant even see through moborobo and im stuck. i think im stuck in recovery screen, but no way to be sure , hence i cant get usb debug.Please help.