My samsung vibrant running 4.0.4 ICS zenwich 1.8.4 randomly shut off today, not even able to turn on, it was the Sleep of Death I have got before, so i pulled battery and reboot, still nothing.
The phone now boots, but their is no display
The phone will literally turn on, have the 4 buttons light up on the bottom, have the screen be responsive to touches, but the physical display is off
I can unlock my phone by swiping, hear the volume up sound, even dial calls by blind touching. It is the same idea as a PC that is plugged in, just so VGA cable to the monitor.
I have tried rebooting to recovery, download mode and tried to heimdall, but it never finds my device, i tried to sdk in and reboot to download mode via cmd prompt but no luck finding device too
I am all out of ideas and nothing is seems to be working
Any advice on resolving this issue would be appreciated
wafflebroski said:
My samsung vibrant running 4.0.4 ICS zenwich 1.8.4 randomly shut off today, not even able to turn on, it was the Sleep of Death I have got before, so i pulled battery and reboot, still nothing.
The phone now boots, but their is no display
The phone will literally turn on, have the 4 buttons light up on the bottom, have the screen be responsive to touches, but the physical display is off
I can unlock my phone by swiping, hear the volume up sound, even dial calls by blind touching. It is the same idea as a PC that is plugged in, just so VGA cable to the monitor.
I have tried rebooting to recovery, download mode and tried to heimdall, but it never finds my device, i tried to sdk in and reboot to download mode via cmd prompt but no luck finding device too
I am all out of ideas and nothing is seems to be working
Any advice on resolving this issue would be appreciated
Click to expand...
Click to collapse
Device Manager show anything is plugged in?
FaultException said:
Device Manager show anything is plugged in?
Click to expand...
Click to collapse
Yes, It shows up as the linusb winusb t-959 but neither heimdall or android sdk find the device.
wafflebroski said:
Yes, It shows up as the linusb winusb t-959 but neither heimdall or android sdk find the device.
Click to expand...
Click to collapse
So were you able to get into Download Mode at all? And if so was the display on then?
FaultException said:
So were you able to get into Download Mode at all? And if so was the display on then?
Click to expand...
Click to collapse
i think it did because it wasnt at a lock screen, and when i touched the soft buttons they would light up, but the phone wasnt in an OS.
the screen was still off though, I can't get anything to make it turn on
wafflebroski said:
i think it did because it wasnt at a lock screen, and when i touched the soft buttons they would light up, but the phone wasnt in an OS.
the screen was still off though, I can't get anything to make it turn on
Click to expand...
Click to collapse
What method did you use to get into Download Mode?
FaultException said:
What method did you use to get into Download Mode?
Click to expand...
Click to collapse
take battery out, hold vol + and - and power button, put battery in while usb connected
wafflebroski said:
take battery out, hold vol + and - and power button, put battery in while usb connected
Click to expand...
Click to collapse
You may've gotten into recovery, I can't really get into download mode like that. Try this:
Unplug USB & remove battery
Insert battery but do not power on.
Hold VOL-UP + VOL-DOWN
Insert USB and wait a few seconds, while still holding them
FaultException said:
You may've gotten into recovery, I can't really get into download mode like that. Try this:
Unplug USB & remove battery
Insert battery but do not power on.
Hold VOL-UP + VOL-DOWN
Insert USB and wait a few seconds, while still holding them
Click to expand...
Click to collapse
Ok that works, I'm defineatly in download mode, the device shows up in ODIN, but not heimdall. I am not familiar with ODIN, how would I go about flashing the ICS zen rom? I found a tutorial to flash back to stock ROM and wipe all data, but I would like to be able to just reflash the ICS rom
wafflebroski said:
Ok that works, I'm defineatly in download mode, the device shows up in ODIN, but not heimdall. I am not familiar with ODIN, how would I go about flashing the ICS zen rom? I found a tutorial to flash back to stock ROM and wipe all data, but I would like to be able to just reflash the ICS rom
Click to expand...
Click to collapse
Ok, so it shows the download mode on the screen of the phone?
If so, that's good news and means your screen is not shot.
Try to get Heimdall to work. Are you in windows? Then you'll need to uninstall the samsung drivers and do this (from CM update guide):
CM update guide said:
1. Run the included zadig.exe in the drivers folder of the Heimdall Suite.
2. From the menu, choose Options ยป List All Devices.
3. From the drop down, select Samsung USB Composite Device or Gadget Serial.
4. Click Install Driver.
NOTE: A prompt may appear warning that the installer is unable to verify the publisher of the driver. Ignore it and select "Install this driver anyway."
5. Heimdall can now be used safely on the Windows computer.
Click to expand...
Click to collapse
Once heimdall is running, try grabbing the boot.img out of the zen zip and do this:
Code:
heimdall flash --kernel boot.img
See if anything comes of that.
The screen never turned on.. it just went into download mode and i was able to see from ODIN that it was recognized. So i ODIN'd back to stock rom, i heard the phone reboot, but still no display.
Like before the phone's screen is 100% responsive, i can unlock the phone, hear the usb plugging in noise, just no display. It just blows my mind because the screen works but its not on.. I am very confused
wafflebroski said:
The screen never turned on.. it just went into download mode and i was able to see from ODIN that it was recognized. So i ODIN'd back to stock rom, i heard the phone reboot, but still no display.
Like before the phone's screen is 100% responsive, i can unlock the phone, hear the usb plugging in noise, just no display. It just blows my mind because the screen works but its not on.. I am very confused
Click to expand...
Click to collapse
That's not good. Your phone might be done for then. I once repartitioned with no partition files and still download mode worked on a fresh battery pull.
Maybe try leaving the battery out for a while and see if it fixes itself, since it seems to be an electronics problem, maybe something needs time to reset or something.
Sent from my SGH-T959 using xda premium
Yea I've had the battery out for over 30 mins and nothing. I even opened up my phone last night to check all the ribbon wires and connections, everything looked fine and i removed the motherboard & replugged everything in.. still no luck
it's a good thing my contract is up I think I am going to get the samsung galaxy s 3..
RIP vibrant best phone i ever had, I'm surprised it lasted this long with all the mods I had done to it haha
my xt890 lcd screen and digitizer were broken so i changed them and the phone was working fine for a week, i then wanted to update to kitkat through oem update; everytime i tried it would give me error . i then read that since i unlocked bootloader and rooted my phone and installed cwm recovery i couldnt do an oem update and i had to do a factory reset in order to update through oem, so i did just that ; after the phone finished factory reset and booted i proceeded with oem update while the phone was charging, everything was going fine the file was downloading, i went to the bathroom and came back the display was black, but touch screen was working fine...through more searching i read that this could be from the update, and i should do another reset... since i couldnt see anything even recovery menu. i downloaded moborobo so i can see my screen on pc and proceeded to factory reset ... now i cant even see through moborobo and im stuck. i think im stuck in recovery screen, but no way to be sure , hence i cant get usb debug.Please help.
Related
Hi guys,
I figured I'll post again here since I think I bricked my phone.... I was trying to install Eugene's Vibrant6.zip and I got stuck on the Vibrant Logo with Samsung at the bottom. I tried to reset with both volume buttons and power button and got to grey battery and nothing else...
What I did prior to this was I formatted system and data on the recovery screen as per some posts here and it would just boot into a loop. Windows won't recognize a device and it just shows grey battery image and it doesn't seem to be charging. Anyone can help me?
EDIT:
Out and in the battery, plugged in to USB and it just loads the battery image and it's all grey color as if fully discharged and just stuck on it. Device is also not found in my system so I can't do any adb commands. If I just reset it without the cable it would just sit on the Samsung boot loop. Anything I can do?
UPDATE: Ok, some good news! I heard the sound as it connected via USB, I can see the 2 drives, but they read as Removable Disk and I can't access them...
adb reboot recovery or download
error: device not found
What if simply format the drives via Windows right click menu? Will that do any good or bad? What are my options here? Any help will be appreciated!
UPDATE: Well... looks like this is pretty much a dead phone.... I right clicked and selected Format in My Computer and it just says There is no disk in Driver F: Insert a disk and try again.
Can I a mount an image somehow via MagicISO? Or is there something simpler that I just can't figure out?
Again, thanks for your help!
Thanks.
Has anyone experienced this or am I the only one?
M5devil said:
Has anyone experienced this or am I the only one?
Click to expand...
Click to collapse
Sorry I have never heard of this or witnessed it while flashing anything to my device. Obviously the battery screen signifies that the phone is off but is in charging mode and hitting the power button will boot the device up. (I'm sure you already know of this). Never heard of it being stuck at that screen after flashing. Hopefully you can get this solved soon. Good luck
M5devil said:
Hi guys,
I figured I'll post again here since I think I bricked my phone.... I was trying to install Eugene's Vibrant6.zip and I got stuck on the Vibrant Logo with Samsung at the bottom. I tried to reset with both volume buttons and power button and got to grey battery and nothing else...
What I did prior to this was I formatted system and data on the recovery screen as per some posts here and it would just boot into a loop. Windows won't recognize a device and it just shows grey battery image and it doesn't seem to be charging. Anyone can help me?
EDIT:
Out and in the battery, plugged in to USB and it just loads the battery image and it's all grey color as if fully discharged and just stuck on it. Device is also not found in my system so I can't do any adb commands. If I just reset it without the cable it would just sit on the Samsung boot loop. Anything I can do?
UPDATE: Ok, some good news! I heard the sound as it connected via USB, I can see the 2 drives, but they read as Removable Disk and I can't access them...
adb reboot recovery or download
error: device not found
What if simply format the drives via Windows right click menu? Will that do any good or bad? What are my options here? Any help will be appreciated!
UPDATE: Well... looks like this is pretty much a dead phone.... I right clicked and selected Format in My Computer and it just says There is no disk in Driver F: Insert a disk and try again.
Can I a mount an image somehow via MagicISO? Or is there something simpler that I just can't figure out?
Again, thanks for your help!
Thanks.
Click to expand...
Click to collapse
Slow down for a second. Your phone is definitely not bricked. Ive been over the edge, and been able to bring my phone back to life.
To clarify, you flashed vibrant6.zip through clockwork mod, and then the phone got stuck on the samsung S? How long did you let it sit there?
It sounds like just your ROM is messed up.
Are you able to "get into recovery"? Holding both volume buttons while you power on the phone, without it being plugged into usb.
Do you have Odin? And have you ever used it?
Its totally frustrating when your phone gets messed up and you don't know what to do.
I flashed the stock ROM via Odin and then wanted to install Vibrant6.zip. For that I entered into a recovery mode via Clockwork and as someone in the other thread advised, I formatted system and also data, don't recall exactly. Then it looped to a standard recovery mode and I just rebooted the phone. This is where it got stuck... Vibrant in the center and Samsung at the bottom of the screen. To test it I left it like that from night till this morning. In the morning I woke up it was on the same boot screen.
Before that at night, after seeing it hand at the boot, I held both volume keys and power, waited for it to reboot, and immediately it showed a circular progress bar, but not moving just highlighted the 12 o'clock bar and second later I see the battery image all in gray and nothing else. It just sits on that grey static image without actually charging it (no green section or flashing dots)
Boot logo only appears if I am trying to reset without the USB cable. On the boot loop I plug in the cable and I hear the USB connecting it, I see the 2 Removable disks, but both inaccessible and adb commands don't recognize the device.
Very weird, as in turned off mode it's not charging at all.. just shows this grey battery image with a circle progress froze on 12 o'clock bar.
That's pretty much it.... I was never able to enter into recovery nor download via the buttons. It would just always reboot into this grey battery screen....
Completely helpless.... I did order a new battery from TMO, maybe the battery is fried and that's why it's not charging and just sits on this stupid static grey battery screen.
ArbitrageMan said:
It sounds like just your ROM is messed up.
Are you able to "get into recovery"? Holding both volume buttons while you power on the phone, without it being plugged into usb.
Do you have Odin? And have you ever used it?
Its totally frustrating when your phone gets messed up and you don't know what to do.
Click to expand...
Click to collapse
Holding both volume keys and releasing power once screen goes blank, only show Vibrant logo again... I have tried this a million times
With USB cable it shows grey battery screen, without the cable just a Vibrant boot loop...
I'm assuming that you have the Samsung drivers installed.
Try the following steps:
Take out the battery and then put it back in but don't turn the phone on.
Plug it via USB.. does anything show up on the screen?
zephiK said:
I'm assuming that you have the Samsung drivers installed.
Try the following steps:
Take out the battery and then put it back in but don't turn the phone on.
Plug it via USB.. does anything show up on the screen?
Click to expand...
Click to collapse
Yes, I have the drivers installed as I was able to locate my device and use adb commands to enter into recovery and download. Also Kies worked.
Doing what you asked simply load the grey battery image and nothing else with a progress bar not spinning. Just sort of hangs on this image and that's all.
Booting without the USB cable loads the Vibrant boot loop. Connecting USB at this boot loop state, would play a sound as if it connected to my windows, but I can only see Removable disks that are inaccessible and adb doesn't find the device...
Very strange.... trying to use the button keys to enter into recovery or download is no use, as that just won't ever happen, even when phone was working fine.
Any other suggestions? I would return the phone for replacement... but I am not sure how it would look with all the files still on the internal disk including root if I am not mistaken... I had only few hours of sleep because of this headache
M5devil said:
Yes, I have the drivers installed as I was able to locate my device and use adb commands to enter into recovery and download. Also Kies worked.
Doing what you asked simply load the grey battery image and nothing else with a progress bar not spinning. Just sort of hangs on this image and that's all.
Booting without the USB cable loads the Vibrant boot loop. Connecting USB at this boot loop state, would play a sound as if it connected to my windows, but I can only see Removable disks that are inaccessible and adb doesn't find the device...
Very strange.... trying to use the button keys to enter into recovery or download is no use, as that just won't ever happen, even when phone was working fine.
Any other suggestions? I would return the phone for replacement... but I am not sure how it would look with all the files still on the internal disk including root if I am not mistaken... I had only few hours of sleep because of this headache
Click to expand...
Click to collapse
Are you sure that you're doing the right things to get to download? I've been in this situation and I wasn't able to get into recovery but I was able to get back into download mode.
I believe if you return it back and they find out it was rooted, they will charge you for it. If not, it'll appear on your bill.
I'm sure that you're doing the wrong things to get into download mode. If something is appearing on your screen it is a soft-brick and you're not bricked.
1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen (powers on its own when plugged in)
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
Click to expand...
Click to collapse
A tip to get into download mode is to put the phone HORIZONTALLY (sideways) and it will make it a lot easier.
I am pretty much positive about it. I know a lot of people can easily enter into recovery or download modes, but I know many can't and I am one of them. It would just load the grey battery image instantly as I let go of the power button.
1. Take out battery, put it back in. (to turn the phone fully off) DONE
2. Don't turn it the phone on! DONE
3. Plug the phone into your PC, do not hit the power button! DONE
4. See if the phone shows anything on the screen (powers on its own when plugged in) FIRST THING THAT APPEARS IS A CIRCULAR PROGRESS BAR THAT CHANGES TO A GREY BATTERY IMAGE WITH A BAR IN THE MIDDLE OF IT. STATIC IMAGE, NOTHING ELSE.
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons. DONE
6. Hold the power button as well as the volume buttons until the screen goes black. DONE
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons! DONE
THE STUPID GREY COLOR BATTERY IMAGE APPEARS AS BEFORE....
I'm thinking maybe battery is fried and that's why the grey color screen appears and not the usual screen where you see the battery charging...
After reading this thread it's clear that my handset is one of the new ones that have recovery/download modes disabled via the volume+power buttons.
So that pretty much covers it... I hope TMO will not ***** about the files that are on the internal sd that I am unable to access and remove... unless anyone else has any fresh ideals how to gain access to the disk
I think I might have a similar problem.
I accidentally deleted the touchwiz framework so I can't do anything ON the phone. It boots up, and gets me to the lock screen. As soon as I unlock, I am greeted with dozens of unending force closes.
I can get into both download and recovery mode, however, I have not been able to get ADB to recognize the device. I am attempting to push the stock ROM to the internal memory to flash over everything.
I'm not sure what to do to get ADB to work but it's driving me nuts!
Stuck at vibrant? I have a fix
Check out android Dev Section... I figured out how to access download mode or stock recovery mode when you are stuck at the vibrant screen!!!! BACK IN BUSINESS VIBRANT OWNERS!!!
i got the same problem and nothing seems to work
Try this out http://forum.xda-developers.com/showthread.php?t=1103706
Feels like I'm having same issues..
the previous post requires opening the phone and I don't have tools for that..
Here's my issue.
I can't get into Recovery or Download and computer won't see phone to Odin.
I've got drivers installed and AIO Toolbox as well as ADB(which won't work because of computer not seeing phone.
Using the manual option(vol+ vol- power), nothing works.
I've done all the tricks like unplug it then hold vol keys plug it insert battery..
When I do plug in the phone to to even just get a charge in it goes the the battery, but my is is frozen or something. doesn't turn green or have a charging animation. After about a minute or so it was start up and boot loop. I read something about a bad battery? I've got two of them and they seemed fine before..
Before all this I had to Odin and go to stock. I was attempting to get ics back but I was being lazy and trying to do as little as possible..bad idea. I was following slim ics install and flashed cm9 daily, slimics and commons..and now this..
I'm not sure what to do..I usually search around xda or google..10 hours later.. idk..Anyone able to give help please?
:crying:
eduardo_reflex said:
i got the same problem and nothing seems to work
Click to expand...
Click to collapse
... do i even have to say it?
droyd666 said:
Try this out http://forum.xda-developers.com/showthread.php?t=1103706
Click to expand...
Click to collapse
this problem is most likely solved. After 2 years!
mylostlonelysoul said:
Feels like I'm having same issues..
the previous post requires opening the phone and I don't have tools for that..
Here's my issue.
I can't get into Recovery or Download and computer won't see phone to Odin.
I've got drivers installed and AIO Toolbox as well as ADB(which won't work because of computer not seeing phone.
Using the manual option(vol+ vol- power), nothing works.
I've done all the tricks like unplug it then hold vol keys plug it insert battery..
When I do plug in the phone to to even just get a charge in it goes the the battery, but my is is frozen or something. doesn't turn green or have a charging animation. After about a minute or so it was start up and boot loop. I read something about a bad battery? I've got two of them and they seemed fine before..
Before all this I had to Odin and go to stock. I was attempting to get ics back but I was being lazy and trying to do as little as possible..bad idea. I was following slim ics install and flashed cm9 daily, slimics and commons..and now this..
I'm not sure what to do..I usually search around xda or google..10 hours later.. idk..Anyone able to give help please?
:crying:
Click to expand...
Click to collapse
Try asking another question. But I suggest using a USB jig. They usually work. Then odin
Sent from Mount Olympus via Hermes
Did you ever get it fixed man? I literally did the very same to mine a while back and It works like butter as we speak. It is fixable with a mini-usb jig or dongle. You can make your own with about $3 worth of parts from radio shack but I recommend buying one, it will be easier. I for the record made mine simply twisting together the resistors and though it was tough to touch the right pins it did eventually work and get me back into download mode.
Hopefully you already got it fixed though. If not I can help you out.
Well, after spending almost 11 hours trying to boot into recovery or download, I know for sure that there is something going on with my phone re: hardware locked. The date on my box is 7-16. It is an early Vibrant. But no matter what I do, I cannot get into download or recovery which means my ****ing phone is literally worthless.
I have tried all possible thousands of combination's of buttons, batteries, and cords while booting and nothing happens.
The Vibrant logo shows, then it shows the pink, annoying as hell T-mobile logo, than goes to the Galaxy S logo which loads for a little bit and then just leads me to a black screen. Eventually the 4 buttons on the front of the phone turn on and then nothing else happens. It will just sit like this forever.
I know all I need to do is get a working ROM loaded but it is literally impossible to do so.
Can anyone offer any suggestions? Or are anyone else having the same problem?
I guess the only way I can get a working phone is to get in touch with T-mobile and do a Warranty exchange. That's a damn shame too, because I will be without a working phone for a week.
What about using adb?
adb reboot recovery -or- adb reboot download ?
I had a hw locked vibrant, never tried the adb reboot download, recovery did work.. I added another line on my account last night for somone, who got a vibrant, theirs wasn't hw locked, so I traded 'em ;P
Agree with the above poster I have been stuck on the vibrant screen or dark screen and adb still worked to save me
when i try to use adb, it just tells me that it cant find the device. i'm not able to boot into android OS at all.... screen just hangs. so my computer is never getting a chance to see my phone hence why i cant use adb to reboot it into recovery or download.
I believe your device has to go into recovery mode then check with and devices and if you see a device I THINK it is and reboot download, I am 90% certain
Sent from my SGH-T959 using Tapatalk
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
98classic said:
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
Click to expand...
Click to collapse
i do believe i have the correct drivers installed. i was able to use adb to run lagfixes before i was having this problem. when i boot my phone, i get a sound from my computer saying that it recognizes a usb device. the two drives in the vibrant show up in My Computer but i cannot access them as windows says they are not accessable at the moment.
at what point will adb be able to recognize my phone when booting? no matter what i do when i try adb shell i get error: device not found
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Same problem here. I probably just have to sell it fast on ebay or something. Hopefully some kind of fix starts by the end of the week. First phone in my smartphone life to brick from a simple Voodoo lag fix. Please XDA gods find a solution.
crazycaveman said:
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Click to expand...
Click to collapse
nope, no go. adb will not recognize my device no matter what. and the device isnt loading the OS so i cannot turn debugging on. i guess this is a real "brick" then.
This sounds like a rant rather than a question. Just sayin'.
DKYang said:
This sounds like a rant rather than a question. Just sayin'.
Click to expand...
Click to collapse
fixed that. my bad.
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
renocivik said:
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
Click to expand...
Click to collapse
thanks for the suggestion. i found your thread and went through the steps in the OP... still no luck. no matter what i do, i cannot get passed the black screen the loads after the galaxy s logo. i also cannot get into download mode or recovery no matter what combination of button presses i use.
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
core99 said:
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
Click to expand...
Click to collapse
this isnt working either. :-(
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
atoz350 said:
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
Click to expand...
Click to collapse
this is exactly the method i want to try. but unfortunately i cannot get the phone into recovery or download mode. i have tried at least 100 times now with many different combination's of plugging the usb cord in and pressing the volume and power buttons.
two ideas: one, is it possible that i wiped recovery and download mode from my phone on accident? the reason why i ask is that i was super tired and flashing roms and kernels to my phone. i flashed back to my original stock rom and then i flashed the kernel. for some reason, i selected wipe date/cache in Rom Manager before flashing the kernel. i have no idea why i did this. seriously. totally noob move. so im assuming i have a kernel flashed but now there is no ROM installed for the phone to boot into.
two, if above is not the issue, than im going to assume that the phone is not recognizing any button presses while its off, so when i turn it on it just recognizes that the power was pressed and ignores the volume presses, thus not booting the phone into recovery or download.
edit: i should mention again that at no time does adb recognize my device. so i cannot use adb to reboot the phone into the mode i need.
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
byt3b0mb said:
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
Click to expand...
Click to collapse
I understand what you mean. I appreciate your criticism of my original post. Let me say that I wrote it while frustrated. But I know that isn't an excuse.
The device is fantastic. I know that I did this to it myself. It's unfortunate.
Anyways, I received a replacement phone. I will be more careful this time.
i commited the mistake of partitioning the sd card using rom manager.....so then i tried this http://forum.xda-developers.com/showthread.php?t=745547
flashed the EU version , then i strggled going into dowload mode again....i finally got into download mode using adb ...and when i was flashing it , it suddendly stopped and then the phone to pc symbol appeared
i dont know what else to do...i've been up all night and the phone is not even mine :'( please help
also my phone seems to be locked ....
Can you get phone into download mode? Install odin and all windows drivers. Take out batt plug up usb hold vol up and down and put in battery. If that doesn't work there is a cable you can but that might force it into download mode
Sent from my SGH-T959 using XDA App
stephenj37826 said:
Can you get phone into download mode? Install odin and all windows drivers. Take out batt plug up usb hold vol up and down and put in battery. If that doesn't work there is a cable you can but that might force it into download mode
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
i"ve tried that but no luck =/
Can you get adb to work?
I had the same thing happen earlier, I was flashing back a stock ROM in Odin, which I have done before, and this time it was doing the cache files and the phone went black and removed from Odin, now this PC-Computer icon is up. Holding down the power-button just blanks for a second then puts back to the phone-pc screen, my phone was hardware locked so the power+volumes does nothing, and the computer won't recognize the phone in adb.
Mothafizzy said:
I had the same thing happen earlier, I was flashing back a stock ROM in Odin, which I have done before, and this time it was doing the cache files and the phone went black and removed from Odin, now this PC-Computer icon is up. Holding down the power-button just blanks for a second then puts back to the phone-pc screen, my phone was hardware locked so the power+volumes does nothing, and the computer won't recognize the phone in adb.
Click to expand...
Click to collapse
exactly....we are having the same problem....we cant do anything but watch that damn sign
did you fix it?
sadly mine was that way and I had to get it replaced
nomadrider123 said:
sadly mine was that way and I had to get it replaced
Click to expand...
Click to collapse
so i guess if you soft brick a hardware lock vibrant ur out of luck?
so you called tmobile to get a replacement?
El Cipitio said:
so i guess if you soft brick a hardware lock vibrant ur out of luck?
so you called tmobile to get a replacement?
Click to expand...
Click to collapse
If you have tried everything twice and nothing worked .Don't mess around with customer services. You need to talk to tech services they got me a replacement
Download Mode trick.. it worked for me.
Ok guys! here you go.... If you feel like you semi-bricked your phone and cannot boot into download mode.. there is a trick that might work for some or it might not doesn't hurt to try, but damn sure worked for me... Make sure phone is connected to computer with ODIN Opened,..
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone. IT SHOULD BOOT INTO DOWNLOAD MODE. if not sorry. Sometimes when people flash back and forth the up and down volume keys get reversed... so try volume down and power.. or volume up and power. GOOD LUCK!!!
tee34life said:
Ok guys! here you go.... If you feel like you semi-bricked your phone and cannot boot into download mode.. there is a trick that might work for some or it might not doesn't hurt to try, but damn sure worked for me... Make sure phone is connected to computer with ODIN Opened,..
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone. IT SHOULD BOOT INTO DOWNLOAD MODE. if not sorry. Sometimes when people flash back and forth the up and down volume keys get reversed... so try volume down and power.. or volume up and power. GOOD LUCK!!!
Click to expand...
Click to collapse
No luck, currently going through a relentless trial-error process of different usb-battery-sim/sd-volume-power buttons. Just found out insurance which I thought was covered on my phone via Asurion through T-Mobile is only covering one of the phones on my line, yet I bought them both with warranties at the same time... Pretty bummed, Only is looking like paying the deductable fee for a new phone as if lost/stolen.. Hope something pulls through.
Just a small deviation
1. Take out the battery
2. Plug the USB into the phone
3. Plug USB into the PC
4. Hold down the Volume up/down + Power button with one hand
5. Put the battery back in with the other hand
6. Wait for the phone2pc icon to flash 2 times and on the second time when the screen goes black release only the POWER BUTTON
7. When you see the digging Android you can let go of the Volume buttons
That is the only way I could get it to work
I've searched everywherem nothing worked, can some plz tell me how to put my vibrant in DL Mode so i can restore with odin3
Kennii said:
I've searched everywherem nothing worked, can some plz tell me how to put my vibrant in DL Mode so i can restore with odin3
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=749413
if that doesn't work...
From here.. http://forum.xda-developers.com/showthread.php?t=848737
1. Get into Download Mode (WITH THE PHONE PLUGGED IN) by following the steps below
*Turn off the phone until you get to the charging battery screen (keep in mind, your phone is currently PLUGGED IN)
*Press volume up and down, and power all at once.
*As soon as the screen turns black, release your power button.
2. Unplug phone from USB
3. Open Odin (in Administrator if you're running W7 or Vista), try one of the ones I attached to this post, at least one of them is bound to work, some don't work for me, but works for others, some doesn't work for others, but works for me, whatever floats your boat
4. Load in the files into Odin that you have downloaded from above Just load in the files corresponding to the text field.
DO NOT CHECK REPARTITION.
5. Plug in your phone with the DL mode
6. Click start and wait for the magic
i can get into recovery mode but not dl mode, an my pc never recognized my phone via usb even when android worked
Kennii said:
i can get into recovery mode but not dl mode, an my pc never recognized my pc via usb even when android worked
Click to expand...
Click to collapse
Try my how-to...
Also, try pulling the battery, and then holding the Vol up+Vol dn keys, plug the usb cable in, then plug the battery back in..., make sure the usb cable is plugged into your computer...
Or.., if your phone is partially booting, then:
Code:
adb reboot download
i cant "power off" phone cause i cant boot android
Kennii said:
i cant "power off" phone cause i cant boot android
Click to expand...
Click to collapse
10 seconds: hold power...
When the phone reboots to the Vibrant screen...
Press and hold: Vol up+Vol Dn+Power....
Wait for the Vibrant screen to reboot again...
Release Power... Download mode...
* Unfortunately, sounds like you've never setup adb or the sdk. I would recommed this...
i think i have a hardware locked phone, i just got it today.
But i can get into recovery mode via hardware, so maybe i dont have hardware locked? and it IS possible to get to download mode on my phone via the buttons right?
Kennii said:
i think i have a hardware locked phone, i just got it today.
But i can get into recovery mode via hardware, so maybe i dont have hardware locked? and it IS possible to get to download mode on my phone via the buttons right?
Click to expand...
Click to collapse
Try here too, if that doesn't work for you...don't know what to tell you other than keep trying, you'll get in...
dasunsrule32 said:
10 seconds: hold power...
When the phone reboots to the Vibrant screen...
Press and hold: Vol up+Vol Dn+Power....
Wait for the Vibrant screen to reboot again...
Release Power... Download mode...
* Unfortunately, sounds like you've never setup adb or the sdk. I would recommed this...
Click to expand...
Click to collapse
when i did this i got recovery mode i'll try again.
where can i install this "adb" or "sdk" which ever ones easier?
Kennii said:
when i did this i got recovery mode i'll try again.
where can i install this "adb" or "sdk" which ever ones easier?
Click to expand...
Click to collapse
http://developer.android.com/sdk/index.html
1. Turn off device
2. Remove battery
3. Hold Vol up and Vol down (works best upside down)
4. Insert battery into device
5. Plug USB cable into device (also plugged into your computer)
Voila, Should enter download mode. Good luck!
and then what?
don't i need the pc to recognize my phone for this to work? and how would i do that if im stuck on the vibrant screen?
cvibe88 said:
1. Turn off device
2. Remove battery
3. Hold Vol up and Vol down (works best upside down)
4. Insert battery into device
5. Plug USB cable into device (also plugged into your computer)
Voila, Should enter download mode. Good luck!
Click to expand...
Click to collapse
when i do that the vibrant screen comes up and stays there
Kennii said:
and then what?
don't i need the pc to recognize my phone for this to work? and how would i do that if im stuck on the vibrant screen?
Click to expand...
Click to collapse
If you follow the steps your phone will enter download mode, In order for your PC to recognize what kind of device is plugged into it you need the samsung drivers. Which are here http://forum.xda-developers.com/showthread.php?t=728929
But im stuck on vibrant screen no OS is loaded
Kennii said:
But im stuck on vibrant screen no OS is loaded
Click to expand...
Click to collapse
Right, it sounds like you had a bad flash and your phone is stuck during boot
cvibe88 said:
Right, it sounds like you had a bad flash and your phone is stuck during boot
Click to expand...
Click to collapse
yes, so is that fixable?
Yeah definitely fixable, You just need to install the Samsung drivers onto your PC. Use Odin to flash a stock ROM onto your device and things should be better for you. I would suggest doing some research here on XDAand getting familiar with flashing a phone. Ive recovered from where you are now(a long time ago) this phone is very resilient. I have a thread over in the Q&A section with links to a video tutorial that I made for flashing a phone from stock, rooting, then all the way up to nero. Do a search on it, Good luck!
i just need to get into need to get into download mode and get odin to recongnize my phone and i should be good, it's such a pain! ;(. But THANKS for your help! I wish theres just ONE way to get into download mode.
Verizon SGS3. This is my first Samsung, so I have no doubt that it was something I did - been running my OG Droid since it came out and I'm not very familiar with the Samsung setup.
I followed this thread
http://forum.xda-developers.com/showthread.php?t=1762204
The forum won't let me post my question there, due to my low post count, so I put it here...
I used Odin to flash the image in the PDA field. Right after that, without checking to see if the phone was working properly, I used ADB to put CWM on there. The phone was turned on (not in Odin mode) when I pushed the recovery. Now I can't get the phone to turn even turn on, much less get into Odin mode to reflash....(yes, I've pulled the battery).
My computer recognizes when I plug my phone in (it give the "you plugged something in" tone), but it doesn't register in Windows explorer.
Any ideas...?
Not sure if this will be any help but..
I was flashing the same rom as you and my computer randomly blue screened in the middle of it and my phone wouldn't boot. I tried just flashing it again with odin right over it, but same problem.
I had to do a factory reset, flash the Samsung stock rom (which unrooted), I think I did another factory reset, and finally re flashed the root 66 rom. I also booted up the phone and did the initial setup before pushing recovery over with adb, but I'm not sure if that makes a difference.
Good Luck!
I can't even get into Odin, though. Nothing happens when I try to power on....so no getting into Odin or Recovery....very frustrating.
letinsh said:
I can't even get into Odin, though. Nothing happens when I try to power on....so no getting into Odin or Recovery....very frustrating.
Click to expand...
Click to collapse
Was your battery full/plenty of charge when you first flashed through ODIN? What happens when you try to turn it on? No luck with download mode? Are you getting any feedback whatsoever from holding the power button?
Which recovery did you download and flash? I ask because I did this same thing last night and had the same issue. I used the touch recovery (TWRP 2.2.0) from HERE but the direct download link is bad. It gets you the wrong recovery if you download it directly to push via ADB or terminal. You need this one HERE
I hope im wrong but it sounds like a brick. If you can get into download mode your fine.
Battery was 100% (charged it overnight).
Nothing happens when I try to power it on....no lights, no vibration, no noise. Screen doesn't come on, no backlight...nothing.
No feedback whatsoever.
That's interesting. I pulled the battery and plugged in my USB to computer (I'm at work and don't have a regular charger) and the red "charging" LED just came on, but still unresponsive to any button push.
letinsh said:
Battery was 100% (charged it overnight).
Nothing happens when I try to power it on....no lights, no vibration, no noise. Screen doesn't come on, no backlight...nothing.
No feedback whatsoever.
That's interesting. I pulled the battery and plugged in my USB to computer (I'm at work and don't have a regular charger) and the red "charging" LED just came on, but still unresponsive to any button push.
Click to expand...
Click to collapse
Have you battery pulled already besides just now? If you pull the battery hold the power button after you pull for a few seconds, put it back in and then try to power on.
adb doesn't see the device, even though windows registers something as plugged in (tone thru speakers when plugged/unplugged)
mustbepbs said:
Have you battery pulled already besides just now? If you pull the battery hold the power button after you pull for a few seconds, put it back in and then try to power on.
Click to expand...
Click to collapse
Tried this just now. No joy.
....can a mod please verify my account so I can post more often than every 5 minutes...it's very frustrating.
bump
letinsh said:
bump
Click to expand...
Click to collapse
That's really odd that you're getting no life out of it after pushing CWM. What version did you push? When did you push it? You did it via the command prompt or on the actual device?
mustbepbs said:
That's really odd that you're getting no life out of it after pushing CWM. What version did you push? When did you push it? You did it via the command prompt or on the actual device?
Click to expand...
Click to collapse
I worked off of this thread:
http://forum.xda-developers.com/showthread.php?t=1756885
and followed it's directions to a "t"
letinsh said:
I worked off of this thread:
http://forum.xda-developers.com/showthread.php?t=1756885
and followed it's directions to a "t"
Click to expand...
Click to collapse
Sorry, that's not entirely true. I followed those instructions but used the root66 image from this thread
http://forum.xda-developers.com/showthread.php?t=1762204
The CWM file i used was from the [ROOT] [RECOVERY] SCH-i535 thread
After some searching, this same sort of brick seems to be happening when dudes are flashing roms coded for other carriers....but I've got an i535 and have only used i535 files....hmm.
Shot in the dark
This is really just a shot in the dark, but have you tried power,home and volume button?
-SmithTech- said:
This is really just a shot in the dark, but have you tried power,home and volume button?
Click to expand...
Click to collapse
Yes, both vol up and vol down. I've tried every iteration I can think of. I'm waiting to hear back from Josh @ MobileTechVideos to get me an address. I'll be driving out there to have him give it a crack at unbricking...
i am not sure about fixing it, but a good rule of thumb is verify your MD5 on your files always!
I downloaded the same root66 because it was a torrent verifed md5 before I even attempted flashing it.
nosympathy said:
i am not sure about fixing it, but a good rule of thumb is verify your MD5 on your files always!
I downloaded the same root66 because it was a torrent verifed md5 before I even attempted flashing it.
Click to expand...
Click to collapse
+1. Always make sure to verify MD5's before flashing anything, especially in our case. Hopefully you can get that fixed, OP. That's really bizarre.
Possible Fix
Curious.... when you you type ./adb devices does it list any devices there? (Windows its just adb device)
I have seen this happen on Samsung Vibrants and it sounds like your device has forgotten what the hardware keys actually do. If adb works, you can reboot to download it it doesn't a resistor can be built with a Micro usb end to trick the device into download mode. Some were made for the Vibrants and should be able to find them on the forums over there. I believe Team Whiskey built them