Related
is the screen protector that comes in the box any good, or shall i get an alternative?
here's a prior thread discussion about better ones: http://forum.xda-developers.com/showthread.php?t=447681
In my opinion anything but Invisible Shield. The front cover sucks, it's badly dimensioned.
Is there already a scratch guard that is pasted on the screen? If you hold the phone against the light it shows a small plasic piece. Do we need to remove that to place a new guard?
Yes, the X10 comes with a pre applied screen protector, as mentioned on a few threads about screen protectors.
Lol @ x10user. Your direct and to the point responses are funny and useful.
Btw removing the stock screen protector is a personal preference. I found the screen to be way too sensitive when it was off.
Sent from my SAMSUNG-SGH-I897 using XDA App
Thanks for the info folks.
I did see a few scratches on the stock protector so was considering removing it and putting in a new one.
Are you going to get a Tempered Glass Screen Protector for your OnePlus 6T? Does it even need one?
If you are going to get a Tempered Glass Screen Protector, which one are you going to buy?
Yes, yes, Oneplus. Tried a lot of them, only the original is top(imho).
This thread may help:
Which Screen Protector Will You Be Getting For Your OnePlus 6T ?
Anyone else who has got a good TGP which doesn't block the screen, preferably full glue.
Moderator Information
Please continue discussion on this thread.
Thread Closed
I bought a TPU Case and Tempered Glass screen protector off eBay (both came from the same seller) for my ROG Phone 2 (Tencent 8GB/128GB model), so I thought I'd share my thoughts on them.
Case ($10.89): Ultra Thin Soft Silicone Case For ASUS Rog Phone 2 ZS660KL Shockproof Back Cover
Screen Protector ($14.89): Nillkin CP+Pro Tempered Glass Full Screen Protector For ASUS ROG Phone 2 ZS660KL
I love both items!
The case is probably one of the best TPU cases available for the ROG Phone 2 at the moment. All ports are accessible, everything lines up properly, Air Triggers still work great, it has a nice 0.3mm raised lip around the screen to help protect it. Overall, nothing really bad to say about the case, other than maybe the "Soft Silicone" part of the name is a bit misleading as its not like super soft rubber or anything like that. Its flexible before inserting the phone, but I wouldn't really call it soft silicone. Still though, its a great case and I feel the phone is protected from small accidental drops now (definitely more-so than the stock clear hard plastic case that comes with it)!
The Tempered Glass screen protector is also great. The fingerprint sensor still works just fine, Its easy to apply, it can be lifted and re-positioned if you don't get it on perfect the first time. I was worried about the black borders around this particular screen protector when I first bought it, but everything lines up perfectly and doesn't appear to be covering or blocking anything when positioned correctly on the screen!
Edit: ok so even when installed perfectly, the black borders on the sides of the screen protector do block a tiny bit of the screen when viewed straight on... But it is tiny, like maybe 5 or 10 pixels on each side of the screen. You really gotta be looking for it to notice it though.
Edit2: so it also seems there is a very slight decrease in touch screen sensitivity with the tempered glass screen protector installed. After using it for awhile I noticed very occasionally it wouldn't register my input and I'd have to tap again. HOWEVER, this phone is so awesome, it has a built in way to solve this issue. Just go into the settings, then Advanced, scroll to the bottom and enable Glove Mode! It's meant to increases the touch screen sensitivity while wearing gloves, obviously, but works well to fix this minor issue as well.
bluegizmo83 said:
I bought a TPU Case and Tempered Glass screen protector off eBay (both came from the same seller) for my ROG Phone 2 (Tencent 8GB/128GB model), so I thought I'd share my thoughts on them.
Case ($10.89): Ultra Thin Soft Silicone Case For ASUS Rog Phone 2 ZS660KL Shockproof Back Cover
Screen Protector ($14.89): Nillkin CP+Pro Tempered Glass Full Screen Protector For ASUS ROG Phone 2 ZS660KL
I love both items!
The case is probably one of the best TPU cases available for the ROG Phone 2 at the moment. All ports are accessible, everything lines up properly, Air Triggers still work great, it has a nice 0.3mm raised lip around the screen to help protect it. Overall, nothing really bad to say about the case, other than maybe the "Soft Silicone" part of the name is a bit misleading as its not like super soft rubber or anything like that. Its flexible before inserting the phone, but I wouldn't really call it soft silicone. Still though, its a great case and I feel the phone is protected from small accidental drops now (definitely more-so than the stock clear hard plastic case that comes with it)!
The Tempered Glass screen protector is also great. The fingerprint sensor still works just fine, Its easy to apply, it can be lifted and re-positioned if you don't get it on perfect the first time. I was worried about the black borders around this particular screen protector when I first bought it, but everything lines up perfectly and doesn't appear to be covering or blocking anything when positioned correctly on the screen!
Edit: ok so even when installed perfectly, the black borders on the sides of the screen protector do block a tiny bit of the screen when viewed straight on... But it is tiny, like maybe 5 or 10 pixels on each side of the screen. You really gotta be looking for it to notice it though.
Edit2: so it also seems there is a very slight decrease in touch screen sensitivity with the tempered glass screen protector installed. After using it for awhile I noticed very occasionally it wouldn't register my input and I'd have to tap again. HOWEVER, this phone is so awesome, it has a built in way to solve this issue. Just go into the settings, then Advanced, scroll to the bottom and enable Glove Mode! It's meant to increases the touch screen sensitivity while wearing gloves, obviously, but works well to fix this minor issue as well.
Click to expand...
Click to collapse
Good tip on using glove mode when you use a tempered glass screen protector. Thanks!
THREAD CLOSED! If interested in the subject, please follow this already existing thread: https://forum.xda-developers.com/rog...-case-t3956474
Posts have been copied to the other thread.
@bluegizmo83 XDA Forum Rules (excerpt):
...
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
...
Click to expand...
Click to collapse
Since there are no threads here regarding screen protectors I thought I would start and share my thoughts on one I'm using. Share your experiences and links
******* tpu film
I bought the one from *******, to much of my surprise it actually is quite good.
Installation was easy with an included guide/holder. The film has 2 parts that lets you apply the top half first then the bottom.
It's super thin, like what you'd see from the factory. The TPU film is also really smooth.
(Not affiliate link)
https://www.amazon.com/*******-Protector-Display-Fingerprint-Support/dp/B085DB4T83
Not sure why it's putting *** in place of the brand name, lol
Even if it puts *** the link actually works lol
tlxxxsracer said:
Since there are no threads here regarding screen protectors I thought I would start and share my thoughts on one I'm using. Share your experiences and links
******* tpu film
I bought the one from *******, to much of my surprise it actually is quite good.
Installation was easy with an included guide/holder. The film has 2 parts that lets you apply the top half first then the bottom.
It's super thin, like what you'd see from the factory. The TPU film is also really smooth.
(Not affiliate link)
https://www.amazon.com/*******-Protector-Display-Fingerprint-Support/dp/B085DB4T83
Not sure why it's putting *** in place of the brand name, lol
Click to expand...
Click to collapse
I can see that few people suggest this screen protector for other devices too. Can someone share their user experience for this particular brand. Thanks!