Clockwork Mod partitioning problems? - Vibrant Q&A, Help & Troubleshooting

After trying to partition the EXT feature within CLMR once my phone reset it came back up with the boot screen everything normal than nothin but a blank screen. I go back Reflash with Odin and Current Vibrant-Tmo image on here. Result was delayed audio for TMobile start up GIF and sound and no Screen response. Wen tback attempt #2 with Odin/T959UVJD flash phone resets and goes absolutely dead. Remove battery same thing. Anyone else have trouble with Clockwork Mod's partitioning?
I also noticed if you get the phone-!-pc error just running the 512pit file seems to fix it atleast it did for me.

If you had read up on here, you would know that Clockwork tries to partition the internal flash and breaks your phone. You need to Odin flash with the "re-partition" box checked. That should fix it. I have posted a ZIP you can flash that will parition the external card properly, you can edit the script and change the partition sizes if you like, it's set to create a 1GB partition for EXT4 with the remainder as FAT32.

It has been said several times in several places...
DO NOT PARTITION WITH CLOCKWORKMOD RECOVERY

I reflashed with Odin and checked Repartition and thats when it just died after reset, no power no nothin.

I also made the noob mistake of partitioning with clockworkmod . However, my device wasn't bricked. instead, it left absolutely zero memory left for third-party apps and the like. I'm not sure if I should reflash with ODIN since my issue isn't as serious as a brick. Any experienced members on this thread please help.

honoluluacx said:
I also made the noob mistake of partitioning with clockworkmod . However, my device wasn't bricked. instead, it left absolutely zero memory left for third-party apps and the like. I'm not sure if I should reflash with ODIN since my issue isn't as serious as a brick. Any experienced members on this thread please help.
Click to expand...
Click to collapse
Follow this
http://forum.xda-developers.com/showthread.php?t=745547

^ Since the links in that thread no longer work (Eugene left XDA), all you need to do is flash eugenes froyo that doesnt brick (sounds like you have it), pull the battery when done, then flash the stock ODIN pit/tar for JFD, Fixed.

True, that works even better
http://www.4shared.com/file/dJiyRz3v/EUGENE373_SamsungS_Froyo_PDA.html

s15274n said:
^ Since the links in that thread no longer work (Eugene left XDA), all you need to do is flash eugenes froyo that doesnt brick (sounds like you have it), pull the battery when done, then flash the stock ODIN pit/tar for JFD, Fixed.
Click to expand...
Click to collapse
So do I need to reflash eugene's froyo rom or, since I already have it, skip the reflash and go straight to odin? Also, thanx in advance for all the helpful senior members.

HELP!!! I followed the instructions to the letter, but after about three attempts with ODIN, by vibrant still won't boot up. I can still get to download mode, but can't reboot.

power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers

honoluluacx said:
HELP!!! I followed the instructions to the letter, but after about three attempts with ODIN, by vibrant still won't boot up. I can still get to download mode, but can't reboot.
Click to expand...
Click to collapse
Are you online?

I followed the guide. Unfortunately, the device hanged during the reboot. I didn't do anything during that time, so I threw in the towel and told T-Mobile I tried to update to 2.2 and sent it in. Thanks for the links though.

Related

STUCK on Galaxy S Screen after performing ODIN

hey guys. serious situation here. i flashed voodoo beta4 and i followed his steps to disable it and that went great. i wanted to start fresh (primarily to try out kingklick) so i performed ODIN. that went great but when it went to stock recovery, it said couldn't wipe data (in red letters). now it wont get past the Galaxy S screen. it would just stay black, with the lights lit up. please help me. oh and i searched the whole voodoo thread. there were quite a few number of people who had my situation but the thread started getting off topic at page 16, and this whole dilemma disappeared.
soft brick
rpesigan6 said:
hey guys. serious situation here. i flashed voodoo beta4 and i followed his steps to disable it and that went great............
Click to expand...
Click to collapse
the same thing happened to my.
should have read instructions more carefully.
Can still get to do mode and factory recovery.
Tried:
1. In clockwork recovery format everything you can under partitions menu except boot.
2. Flash the stock Rom ODIN with repartition checked (Not JI2 as this wont work with voodoo I believe)
i get DATA WIPE FAILED in red in the recovery read out on first boot
boots past galaxy screen to black screen.
then no vibrate but buttons light up.
FIXED...THANX XDA
EDIT: "I had this issue before, just odin Eugene's 2.2 rom (the one that says unbrickable or something like that). Once you have done that, your phone should reboot right back up. Then use odin to go back to stock."
ok i got it working! for all you who are going through this problem, flash eugenes froyo rom through odin and downgrade. its that simple. thanks to fit333.
i get another error after i flash the unbrickable oden
what my prob was is that i unstalled voodoo lf3 the did the disable lf with a folder then installed a voodo lf beta 4 which bricked my phone. then i formated my internal sd. now i can't reach my sd cards, odin updates don't work eugene unbrickable takes me to a recovery screen with no ok button just up and down. now odin won even work. i lost everything on my phone, is there a way to bring it back to life? by the way eugene unbrick says use ui to format cannot install or create some folder and file.

[Q] Phone not starting up

Okay. So I pushed Axura final onto my phones internal sd card and booted into recovery mode. The damned Axura copy ( it downloaded properly via google chrome, no errors) had some issue with it and DID NOT install properly. I tried again and again to make it work, did not load flash from voodoo eclair 2.1 to axura which is 2.2.
Now I want to use ODIN and come back.
I get into download mode BEAUTIFULLY using youtubes """Samsung Vibrant download mode; Corntez" .
and then load Odin, load pit file, and the tar/jar file. detected as COM 6 Odin says "added" . then run it. RUNS perfectly. firmware update start; cache.rfs;modem.bin;factoryfs.rfs; and all, and the blue bar finished completely.
Then restarts, "VIBRANT" says "data wiping failed " , everything else succeeds...lots of small writing....restart' VIBRANT" ; then Samsung Galaxy S shiny logo.
Now.....the plot thickens and my vibrant does not move forward. Black, black screen.
If I touch the bottom touch keys---viz, home etc...they light up fine. But the screen. the beautiful screen, remains as dark as Lord Voldemorts heart.
What to do??
I forgot to mention that I moved from a forward port on my thinkpad to an aft port )); and the COM4 in ODIN changed to COM 6 , promptly.
Odin is causing some issues. seems like. Any suggestions and links for newer, better versions of the T mobile stock firmware.????
Need I mention that I had voodoo before I tried to put Axura on? I did.
Thanks for all the help, in anticipation,
cheers
houston123 said:
Need I mention that I had voodoo before I tried to put Axura on? I did.
Thanks for all the help, in anticipation,
cheers
Click to expand...
Click to collapse
Houston we have a problem. Voodoo MUST be disabled BEFORE you flash. There are plenty of info on the board on how to do this. Then ODIN to stock then FLASH. Not all ROM's need a lag fix, some just run smooth!
my phone is doing the same thing but all i did was hit the voodoo button that was available in the oclf app and it went dumb the women counted down and said complete after a while and then it stuck on the vibrant samsung screen. i flash with stock rom and now its doing what this guys phone is doing please help us
Hey, yes, I read somewhere, that voodoo needs to be disabled. I did not do that, I had issues doing that.
houston123 said:
Hey, yes, I read somewhere, that voodoo needs to be disabled. I did not do that, I had issues doing that.
Click to expand...
Click to collapse
For the dear love of [deity]/self-sufficiency, go read how to solve your problem
(You need to flash Eugene's "froyo that does not brick." Then flash whichever firmware you want.)
Can someone post a link to Eugenes Froyo that does not brick please. Eugene himself has removed all support. Also, I found a zip file for Eugene somewher and NOT a tar or whateva file type ODIN uses to restore firmware.
houston123 said:
Can someone post a link to Eugenes Froyo that does not brick please. Eugene himself has removed all support. Also, I found a zip file for Eugene somewher and NOT a tar or whateva file type ODIN uses to restore firmware.
Click to expand...
Click to collapse
http://eb-productions.proboards.com/index.cgi?board=samsungsgs
I have tried but doesn't work for me. Unfortunatly I too did not disable voodoo before flashing and now I am stuck and can not get into download screen. I guess I will have to take my stuff to a cell phone repair since I have ran out of options.
got eugenes software. Now I am going to try out this:
""""
ok so here is what you have to do:
1. download odin, froyo that doesn't brick, and 2.1 true stock
2. go to download mode, flash the pit and tar file from the froyo that doesn't brick (DON'T RE-PARTITION!)
3. it will boot into recovery and error out, DONT PANIC, that is what is supposed to happen
4. remove battery (from phone) and usb from phone and computer
5. put battery back in, access odin and download mode
6. flash the pit and tar file from the true 2.1 stock (RE-PARTITION THIS TIME!)
7. if done successfully, your phone software will like when you just took it out of the box!"""
If all this does not work out, I have the 6 $ a month insurance from T Mobile---how do I use that? They might just say **** off, you screwed with the ROM and bricked the phone! Should I told them that someone flicked at Swing dance class.....instead of " I bricked it" sorry!!!!
Your opinions on this???
houston123 said:
If all this does not work out, I have the 6 $ a month insurance from T Mobile---how do I use that? They might just say **** off, you screwed with the ROM and bricked the phone! Should I told them that someone flicked at Swing dance class.....instead of " I bricked it" sorry!!!!
Your opinions on this???
Click to expand...
Click to collapse
My opinion on this is not to worry unless it doesn't work. But since you know how to use Odin and your phone can get into download mode okay, it should work.
With the insurance there is a hefty copay. But you should be fine.

[USCC] Restore phone without ODIN files

!!NOT RESPONSIBLE FOR ANY DAMAGES TO YOUR PHONE. I PERSONALLY DID THIS AND FIXED MY PHONE IF YOU SCREW UP OR SOMETHING GOES WRONG I AM NOT RESPONSIBLE!!
Im going to write up a tutorial on restoring a mesmerize to stock. You all know there isn't any ODIN files for the mesmerize at the current moment. However there is a work around that I figured out.
THIS WILL ONLY WORK IF YOU HAVE A CWM BACKUP!
I can make a stock one if need. I am not however 100% positive if you can use someone elses. Someone will need to clarify this.
Okay to get started you will need to obtain all the VZW ODIN files. I got all mine from: http://forum.xda-developers.com/archive/index.php/t-844886.html
Odin: http://dl.dropbox.com/u/458252/Odin Files/Odin3 v1.3.exe -This is program to use to flash.
Odin Restore file for system: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-System.tar.md5 -----THIS IS FIRST.
Odin Restore file for kernel: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-Kernel.tar.md5 -----THIS IS SECOND.
Odin Restore file for recovery: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-Recovery.tar.md5 ----THIS IS THIRD.---this is just to be safe
Odin Clockwork recovery file: http://dl.dropbox.com/u/458252/CWMrecovery.tar ------THIS IS FOURTH ONE I FLASHED.
Click to expand...
Click to collapse
I want to thank the OP of that article because I would either have a bricked phone, or a fascinate at the current moment.
You can follow the steps on that post to get to the part where you can boot into CWM. After that all you have to do is restore you backup and flash the USCC kernel. I will however go over the steps in this post.
1. Install drivers from Samsung(in that link)
2. Download ODIN and all VZW ODIN files.(in the link)
3. Start ODIN and plug phone into computer via USB cable, then hold the volume down button this will take you into the "flashing" mode. There will be a big Triangle and a android construction worker.
4. Make sure the phone shows up in ODIN.
!!I did not use a PIT file and if you want to you can it is included in that link.
!! ALWAYS USE THE PDA BUTTON. ALWAYS! FOR ALL THESE FILES!
5. Flash Stock-i500-VZW-System.tar.md5 first. Phone will turn off enter "flash" mode same way by holding volume down.
6. Flash Stock-i500-VZW-Kernel.tar.md5. Phone will turn off enter "flash" mode same way by holding volume down.
7. Flash Stock-i500-VZW-Recovery.tar.md5. Phone will turn off enter "flash" mode same way by holding volume down.
8. Flash CWMrecovery.tar.
9. Download http://dl.dropbox.com/u/458252/Fascinate Files/update.zip and put at the root of your SDCARD, DO NOT RENAME.
10. Enter recovery mode via: VOLUME DOWN, VOLUME UP, and POWER and hold until SAMSUNG.
11. Select Apply update.zip in stock recovery. This will bring you into the CWM recovery.
12. Go to backup and restore, select with power button. Then select restore, choose your backup and select yes.
13. This will now restore your system.
14. Load up ODIN again and put your phone in "flash" mode.
15. Download USCC Kernel and load in PDA.(WILL INCLUDE LINK WHEN I GET HOME)
16. Flash.
Your phone is now back to your orginal rom!
I had to figure this out the hard way after flashing a bad rom that wiped out the recovery part of my phone. I had backups but no way of restoring them without CWM. Was about to cave in and just make it a fascinate but after I did so I wanted to try restoring my mesmerize files and reflashing kernel. It worked my phone is 100% back to normal. I can factory reset my phone and make a back up if that is possible for others to use my recovery files. Im not sure so I will not upload until someone clarifies.
Not sure if it is relevant, but I have restored to another users CWM backup on my HTC Desire with no issues.
Thx for this tutorial. I hope I never need it, but better safe than sorry...
thanks for the info. i have a fascinate that i messed up and as right now i can only get the construction guy or the pic of phone connecting with computer...the steps that you mentioned, will they work on fascinate? oh, i can also get to reset screen but i get "E: unable to mount sdcard" or something like this.
I'm in serious need of a Stock Restore of some type. RUU would be nice as I'm not familiar with ADB that much. Can someone point a noob in the right direction?
There is a thread on restoring the fascinate with ODIN. On first page I believe.
You can use this method or there are ODIN files now out so you could just use odin to resotre to stock. I can post them when I get home.
mikeravenelle said:
There is a thread on restoring the fascinate with ODIN. On first page I believe.
You can use this method or there are ODIN files now out so you could just use odin to resotre to stock. I can post them when I get home.
Click to expand...
Click to collapse
OOPS! I should have specified that I have a Mesmerize. I need a Mesmerize restore.
Yah I know I saw your US CELL logo on your post. Yes there are mesmerize odin files now, you can use my above method but it is a little moer dangerous using fascinate files. Thats more of a last resort no way to get mesmerize files. Like I said I can upload the mesmerize odin files and you can use odin to flash them. When i do upload them Ill explain how to.
mikeravenelle said:
Yah I know I saw your US CELL logo on your post. Yes there are mesmerize odin files now, you can use my above method but it is a little moer dangerous using fascinate files. Thats more of a last resort no way to get mesmerize files. Like I said I can upload the mesmerize odin files and you can use odin to flash them. When i do upload them Ill explain how to.
Click to expand...
Click to collapse
That would be sooooo great! Thank you very much.
just tried and it failed. im at a loss. need help
mikeravenelle said:
Like I said I can upload the mesmerize odin files and you can use odin to flash them. When i do upload them Ill explain how to.
Click to expand...
Click to collapse
Any word on this? I fascinated my mesmerize and it would be nice to know I can return to stock if needed. Thx.
~Sophos

So is my Vibrant bricked?

I partitioned my SD card using ROM Manager, turned the phone off and got a black screen with lit keys. So, I read around and was told to use ODIN to reflash the stock TMO build, so I did. Now, Im getting the TMO logo and Galaxy S screen, but I get a black screen still.
I cannot get into download mode. I vol - and power and I get the Vibrant logo, then it goes back off. Even when plugged it, I get the batt charging animation, then back to the Vibrant screen.
I tried to push the update.zip to the SD card through ADB, but I get a permission denied message, meaning the root was killed.
So, is this phone pretty much screwed? I cant think of any other way to get it going outside of moving the update.zip to the sd card by a 3rd party measure i.e card reader/another phone
dude that's not even close to a brick as the phone is still responsive somehow..
do this:
1. pull out battery wait 5-10secs
2. connect USB to computer and phone
3. hold down the vol +/- buttons
4. plug in battery
5. you should be in download mode now
6. do what you gotta do with ODIN
good luck
Dont use that method to get to DL mode . Do it this way . First turn off your phone , then plug the usb cable into your computer ONLY . Next hold both volume buttons and plug the micro usb into your phone . Also use odin v1.3 and flash the rom of your preference .
Edit : xtone beat me to the punch
trill12 said:
I partitioned my SD card using ROM Manager, turned the phone off and got a black screen with lit keys. So, I read around and was told to use ODIN to reflash the stock TMO build, so I did. Now, Im getting the TMO logo and Galaxy S screen, but I get a black screen still.
I cannot get into download mode. I vol - and power and I get the Vibrant logo, then it goes back off. Even when plugged it, I get the batt charging animation, then back to the Vibrant screen.
I tried to push the update.zip to the SD card through ADB, but I get a permission denied message, meaning the root was killed.
So, is this phone pretty much screwed? I cant think of any other way to get it going outside of moving the update.zip to the sd card by a 3rd party measure i.e card reader/another phone
Click to expand...
Click to collapse
Yes using ROM Manager to repartition your phone will create the "soft-brick" you are experiencing. But as one person has already noted, this can pretty much be recovered using ODIN.
Definitely follow the advice given in Posts 2 and 3 of this thread to get into Download mode. If you're not getting the desired results using ODIN, what settings are you using? For example, what are the names of the .pit and .tar files you are using? Did you check or leave unchecked the "re-partition" option?
Sorry for the noobery. Im usually good at this.
Well, I was able to get into download mode and get ODIN to run, but im getting a MBD checksum error when I boot into recovery.
And I cannot install CWM through the market because my Application Storage is at 0.00B for some reason.
trill12 said:
Sorry for the noobery. Im usually good at this.
Well, I was able to get into download mode and get ODIN to run, but im getting a MBD checksum error when I boot into recovery.
And I cannot install CWM through the market because my Application Storage is at 0.00B for some reason.
Click to expand...
Click to collapse
What ROM did you flash. You might want to perform a factory reset and then flash the stock JFD ROM and see if that fixes your problem.
Good luck.
Oh this is a nightmare.... exactly what happened to me.
I'll be honest, I tried and tried and tried all sorts of stuff and somehow I got it back reading again.
I would ODIN to Eugenes Froyo that doesn't brick and see where that gets you. Thread is in developers section and I am pretty sure that's what got me back working but follow ALL the instructions. With no application room I couldn't push, unistall, install ect...
blizzard1017 said:
Oh this is a nightmare.... exactly what happened to me.
I'll be honest, I tried and tried and tried all sorts of stuff and somehow I got it back reading again.
I would ODIN to Eugenes Froyo that doesn't brick and see where that gets you. Thread is in developers section and I am pretty sure that's what got me back working but follow ALL the instructions. With no application room I couldn't push, unistall, install ect...
Click to expand...
Click to collapse
That's only needed if he flashed a rom with the wrong kernel or if he flashed a rom without disabling voodoo .
Sent from my SGH-T959 using XDA App
Just get to DL mode as xtone and I stated in post 2 & 3 . Then flashed to JFD with odin v1.3 and click the repartition box in odin and you'll be fine .
Sent from my SGH-T959 using XDA App
I had this problem for the last two days, but I found a way to fix it thanks to a user (whom I don't know the name of)
I did this to go back to stock firmware (JFD), make sure you have that downloaded.
Look for Eugene's Galaxy S Froyo PDA, for the i9000, not the Vibrant. Flash it through Odin with the 512 pit file. It's not going to boot up but take you to recovery mode instead, and it's going to remap your Volume buttons, but you can still get into DL mode (up is now down, and vice versa but whatever)
Now Odin back to stock, using the same 512 pit and there you go! Should boot up with no problem. Now you can redo everything, but remember to never partition through ROM Manager ever again!
Sent from my SGH-T959 using XDA App
Is there a link you could provide him?
AgentFour20 said:
That's only needed if he flashed a rom with the wrong kernel or if he flashed a rom without disabling voodoo .
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
His exact symptoms happened to me when the noob in me decided to repartition in Rom Manager awhile back. I am just suggesting he uses this tool as an option. It's definitely a good tool to use regardless of how he got where he got.
something like this happened to a buddy of mine, i'm trying to fix it, but the guy was completely stock so it makes no sense... I've tried everything, and i cant seem to find eugenes files...
Mr.Duck said:
something like this happened to a buddy of mine, i'm trying to fix it, but the guy was completely stock so it makes no sense... I've tried everything, and i cant seem to find eugenes files...
Click to expand...
Click to collapse
Eugenes rom are on his new site www.eb-production.proboards.com
Sent from my SGH-T959 using XDA App
OK, I got it fixed. Heres how.
I was finally able to get into ODIN and flash Eugenes Froyo.
So, from there, I was getting an MD5 checksum error when Id try to get into recovery, and I couldnt install the ROM Manager from the Market
Well, upon inspection of a the Nero V3 build I had downloaded, there was a ROMManager.apk there. So I pushed it onto my phone, reflashed to CWR (had to do it about 3 times) and reinstalled Nero V3.
After installing the build, I was able to re-enable voodoo and its theres no more MD5 craziness when I access the Recovery
trill12 said:
OK, I got it fixed. Heres how.
I was finally able to get into ODIN and flash Eugenes Froyo.
So, from there, I was getting an MD5 checksum error when Id try to get into recovery, and I couldnt install the ROM Manager from the Market
Well, upon inspection of a the Nero V3 build I had downloaded, there was a ROMManager.apk there. So I pushed it onto my phone, reflashed to CWR (had to do it about 3 times) and reinstalled Nero V3.
After installing the build, I was able to re-enable voodoo and its theres no more MD5 craziness when I access the Recovery
Click to expand...
Click to collapse
So voodoo was the culprit . lmao
I dont remember you ever mentioning that . Any way glad you figured it out and have your phone back .
AgentFour20 said:
So voodoo was the culprit . lmao
I dont remember you ever mentioning that . Any way glad you figured it out and have your phone back .
Click to expand...
Click to collapse
Apparently. Completely forgot I attempted to enable it. I was freaked all the way out trying to repair the damn thing.

[Q] Borked Partition, cant odin back to stock. Boot loop. Help?

This thread has a similar issue to what im having, but ive branched off elsewhere...
http://forum.xda-developers.com/showthread.php?t=883944&highlight=Rom+Manager+partition+recover
The story: Ive had a rooted vibrant for a while. Im no linux noob, either. I was having some issues so i decided to try Darky's Toxic rom...worked GREAT! I made a clockwork backup...now i felt it safe to start to play.
I was having media scanner issues...so i decided to repartition my storage spaces (and to get rid of the avatar movie)...but i used ROM manager...clearly by mistake. whoops.
So after MUCH trouble with boot looping...i was able to ODIN to Eugene's Froyo that doesnt brick. The STOCK rom wouldnt give me video...just hung after the Galaxy S boot seq. Im assuming thats a voodoo issue?
Anyway...able to get Eugene's on there...and i was smart and made a back up of both storage spots. I reloaded CWR, and tried to restore to the backup of Toxic i made with no luck. Matter of fact, i cant get any other ROM to load that ive tried.
Any suggestions to get my restore point back up and running? I thought about trying to go stock...but like i said, i couldnt get to stock through ODIN.
Couple of Ideas........ I am assuming you can get into download and recovery.
If you can get into recovery, clear cache, wipe dalvik then, pull battery and get into download, then try odin back to stock, remember to check repartition.
Or try Heimdall, sometimes it works when Odin does not. But if you can get into download then, there is a way (or some combo of ways) to get you back to stock. Just be patient and logical......... you will get it..........good luck
I CAN get into download and recovery...and was able to get CWR back on...thankfully.
I have tried every combo of wipes i can think of.
If i flash to true stock 2.1...i get black screen with lit buttons.
If i flash to Eugene's...i can boot into a ROM build with no internal storage, therefore no way to install apps.
I just came across this and tried it...with no new results.
Fix 1:
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! BAM!
Click to expand...
Click to collapse
I'll try your suggestion now...thanks!
Still no luck. Same thing...black screen, with lit buttons.
Did i officially brick this thing?! haha...i thought it barely possible with the vibrant.
I tried flashing the JI6 rom too....still no go.
Anything?
When you Odin to stock, what tar are you using? When you repartition, do you use the pit file?
I suggest that you use the JFD Odin image and repartition using 512.pit. I have also heard of some people having more success with Odin when they dont have an SD card or SIM card in the phone (this may be an old wives tale.) Good luck.
Same problem
I had this exact issue two days ago and after many attempts with Odin, like you, the only ROM I could load was Eugene's. Re-Partitioning with Odin had no affect, stock wouldn't work and wiping everything had no affect. With Eugene's it would show no space for apps and wouldn't hold any settings if the phone was rebooted. It seems that clockwork mod is actually removing the apps partition and no tool I could find would actually recreate it. I searched quite a bit and found several posts all with the same issue and in every case they had to replace the phone. Luckily I am still under warranty so T-Mobile is replacing it. I don't know if the Clockwork Mod developer has a thread on here, but that "feature" needs some work or it needs to be removed.
kadashti said:
When you Odin to stock, what tar are you using? When you repartition, do you use the pit file?
I suggest that you use the JFD Odin image and repartition using 512.pit. I have also heard of some people having more success with Odin when they dont have an SD card or SIM card in the phone (this may be an old wives tale.) Good luck.
Click to expand...
Click to collapse
Yes, ive used both the vanilla JFD tmo tar, and the JI6 tar. Neither worked. Triend both the 512 and the 513 PIT file. 512 for the first HUNDRED times...then 513 for the hell of it, since at this point, i was getting nowhere.
And thanks pamulli, thats what im basically resigning to..i just needed to hear it from another person.
REMINDER: It is as easy as fat fingering the keyboard to totally screw your phone. Click carefully!

Categories

Resources