[USCC] Restore phone without ODIN files - Fascinate Android Development

!!NOT RESPONSIBLE FOR ANY DAMAGES TO YOUR PHONE. I PERSONALLY DID THIS AND FIXED MY PHONE IF YOU SCREW UP OR SOMETHING GOES WRONG I AM NOT RESPONSIBLE!!
Im going to write up a tutorial on restoring a mesmerize to stock. You all know there isn't any ODIN files for the mesmerize at the current moment. However there is a work around that I figured out.
THIS WILL ONLY WORK IF YOU HAVE A CWM BACKUP!
I can make a stock one if need. I am not however 100% positive if you can use someone elses. Someone will need to clarify this.
Okay to get started you will need to obtain all the VZW ODIN files. I got all mine from: http://forum.xda-developers.com/archive/index.php/t-844886.html
Odin: http://dl.dropbox.com/u/458252/Odin Files/Odin3 v1.3.exe -This is program to use to flash.
Odin Restore file for system: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-System.tar.md5 -----THIS IS FIRST.
Odin Restore file for kernel: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-Kernel.tar.md5 -----THIS IS SECOND.
Odin Restore file for recovery: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-Recovery.tar.md5 ----THIS IS THIRD.---this is just to be safe
Odin Clockwork recovery file: http://dl.dropbox.com/u/458252/CWMrecovery.tar ------THIS IS FOURTH ONE I FLASHED.
Click to expand...
Click to collapse
I want to thank the OP of that article because I would either have a bricked phone, or a fascinate at the current moment.
You can follow the steps on that post to get to the part where you can boot into CWM. After that all you have to do is restore you backup and flash the USCC kernel. I will however go over the steps in this post.
1. Install drivers from Samsung(in that link)
2. Download ODIN and all VZW ODIN files.(in the link)
3. Start ODIN and plug phone into computer via USB cable, then hold the volume down button this will take you into the "flashing" mode. There will be a big Triangle and a android construction worker.
4. Make sure the phone shows up in ODIN.
!!I did not use a PIT file and if you want to you can it is included in that link.
!! ALWAYS USE THE PDA BUTTON. ALWAYS! FOR ALL THESE FILES!
5. Flash Stock-i500-VZW-System.tar.md5 first. Phone will turn off enter "flash" mode same way by holding volume down.
6. Flash Stock-i500-VZW-Kernel.tar.md5. Phone will turn off enter "flash" mode same way by holding volume down.
7. Flash Stock-i500-VZW-Recovery.tar.md5. Phone will turn off enter "flash" mode same way by holding volume down.
8. Flash CWMrecovery.tar.
9. Download http://dl.dropbox.com/u/458252/Fascinate Files/update.zip and put at the root of your SDCARD, DO NOT RENAME.
10. Enter recovery mode via: VOLUME DOWN, VOLUME UP, and POWER and hold until SAMSUNG.
11. Select Apply update.zip in stock recovery. This will bring you into the CWM recovery.
12. Go to backup and restore, select with power button. Then select restore, choose your backup and select yes.
13. This will now restore your system.
14. Load up ODIN again and put your phone in "flash" mode.
15. Download USCC Kernel and load in PDA.(WILL INCLUDE LINK WHEN I GET HOME)
16. Flash.
Your phone is now back to your orginal rom!
I had to figure this out the hard way after flashing a bad rom that wiped out the recovery part of my phone. I had backups but no way of restoring them without CWM. Was about to cave in and just make it a fascinate but after I did so I wanted to try restoring my mesmerize files and reflashing kernel. It worked my phone is 100% back to normal. I can factory reset my phone and make a back up if that is possible for others to use my recovery files. Im not sure so I will not upload until someone clarifies.

Not sure if it is relevant, but I have restored to another users CWM backup on my HTC Desire with no issues.
Thx for this tutorial. I hope I never need it, but better safe than sorry...

thanks for the info. i have a fascinate that i messed up and as right now i can only get the construction guy or the pic of phone connecting with computer...the steps that you mentioned, will they work on fascinate? oh, i can also get to reset screen but i get "E: unable to mount sdcard" or something like this.

I'm in serious need of a Stock Restore of some type. RUU would be nice as I'm not familiar with ADB that much. Can someone point a noob in the right direction?

There is a thread on restoring the fascinate with ODIN. On first page I believe.
You can use this method or there are ODIN files now out so you could just use odin to resotre to stock. I can post them when I get home.

mikeravenelle said:
There is a thread on restoring the fascinate with ODIN. On first page I believe.
You can use this method or there are ODIN files now out so you could just use odin to resotre to stock. I can post them when I get home.
Click to expand...
Click to collapse
OOPS! I should have specified that I have a Mesmerize. I need a Mesmerize restore.

Yah I know I saw your US CELL logo on your post. Yes there are mesmerize odin files now, you can use my above method but it is a little moer dangerous using fascinate files. Thats more of a last resort no way to get mesmerize files. Like I said I can upload the mesmerize odin files and you can use odin to flash them. When i do upload them Ill explain how to.

mikeravenelle said:
Yah I know I saw your US CELL logo on your post. Yes there are mesmerize odin files now, you can use my above method but it is a little moer dangerous using fascinate files. Thats more of a last resort no way to get mesmerize files. Like I said I can upload the mesmerize odin files and you can use odin to flash them. When i do upload them Ill explain how to.
Click to expand...
Click to collapse
That would be sooooo great! Thank you very much.

just tried and it failed. im at a loss. need help

mikeravenelle said:
Like I said I can upload the mesmerize odin files and you can use odin to flash them. When i do upload them Ill explain how to.
Click to expand...
Click to collapse
Any word on this? I fascinated my mesmerize and it would be nice to know I can return to stock if needed. Thx.
~Sophos

Related

Clockwork Mod partitioning problems?

After trying to partition the EXT feature within CLMR once my phone reset it came back up with the boot screen everything normal than nothin but a blank screen. I go back Reflash with Odin and Current Vibrant-Tmo image on here. Result was delayed audio for TMobile start up GIF and sound and no Screen response. Wen tback attempt #2 with Odin/T959UVJD flash phone resets and goes absolutely dead. Remove battery same thing. Anyone else have trouble with Clockwork Mod's partitioning?
I also noticed if you get the phone-!-pc error just running the 512pit file seems to fix it atleast it did for me.
If you had read up on here, you would know that Clockwork tries to partition the internal flash and breaks your phone. You need to Odin flash with the "re-partition" box checked. That should fix it. I have posted a ZIP you can flash that will parition the external card properly, you can edit the script and change the partition sizes if you like, it's set to create a 1GB partition for EXT4 with the remainder as FAT32.
It has been said several times in several places...
DO NOT PARTITION WITH CLOCKWORKMOD RECOVERY
I reflashed with Odin and checked Repartition and thats when it just died after reset, no power no nothin.
I also made the noob mistake of partitioning with clockworkmod . However, my device wasn't bricked. instead, it left absolutely zero memory left for third-party apps and the like. I'm not sure if I should reflash with ODIN since my issue isn't as serious as a brick. Any experienced members on this thread please help.
honoluluacx said:
I also made the noob mistake of partitioning with clockworkmod . However, my device wasn't bricked. instead, it left absolutely zero memory left for third-party apps and the like. I'm not sure if I should reflash with ODIN since my issue isn't as serious as a brick. Any experienced members on this thread please help.
Click to expand...
Click to collapse
Follow this
http://forum.xda-developers.com/showthread.php?t=745547
^ Since the links in that thread no longer work (Eugene left XDA), all you need to do is flash eugenes froyo that doesnt brick (sounds like you have it), pull the battery when done, then flash the stock ODIN pit/tar for JFD, Fixed.
True, that works even better
http://www.4shared.com/file/dJiyRz3v/EUGENE373_SamsungS_Froyo_PDA.html
s15274n said:
^ Since the links in that thread no longer work (Eugene left XDA), all you need to do is flash eugenes froyo that doesnt brick (sounds like you have it), pull the battery when done, then flash the stock ODIN pit/tar for JFD, Fixed.
Click to expand...
Click to collapse
So do I need to reflash eugene's froyo rom or, since I already have it, skip the reflash and go straight to odin? Also, thanx in advance for all the helpful senior members.
HELP!!! I followed the instructions to the letter, but after about three attempts with ODIN, by vibrant still won't boot up. I can still get to download mode, but can't reboot.
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
honoluluacx said:
HELP!!! I followed the instructions to the letter, but after about three attempts with ODIN, by vibrant still won't boot up. I can still get to download mode, but can't reboot.
Click to expand...
Click to collapse
Are you online?
I followed the guide. Unfortunately, the device hanged during the reboot. I didn't do anything during that time, so I threw in the towel and told T-Mobile I tried to update to 2.2 and sent it in. Thanks for the links though.

Fascinated-Mesmerize

****THIS POST IS NOT FOR BEGINNERS*****READ COMPLETELY BEFORE PROCEEDING*********************************************************************
I had to do this because I had flashed wrong thing in ODIN, and I had NO other choice....I did not do this by choice but this REALLY WORKS and I THINK ITS GREAT I was taking a RISK and I understood the consequences....I Could have ended up with a BRICKED PHONE, but that was not to be. I am VERY VERY happy with the results.
I WANT TO SAY THAT ALOT OF THE MATERIAL IN THIS POST WAS USED FROM LINKS AND POSTS FROM XDA WEBSITE THEY ARE A GREAT FORUM AND ANYONE DOING THIS SHOULD BECOME A MEMBER OF "XDA" AND "MOD A DROID"....THANK YOU XDA AND ALL THE DEV'S FOR ALL YOUR WORK ALL THE MATERIAL IN THIS POST I WILL PUT LINKS TO PAGES AT THE BOTTOM FROM PAGES USED "BUT I HAVE CHANGED SOME OF THE STEPS SO FOLLOW THIS POSTS INSTRUCTIONS ON HOW TO DO THIS PROCEDURE"....TO FASCINATE YOUR MESMERIZE.
******************************READ ENTIRE POST BEFORE YOU DO ANYTHING TO YOUR PHONE********************************************************
******************************READ ENTIRE POST BEFORE YOU DO ANYTHING TO YOUR PHONE********************************************************
******************************READ ENTIRE POST BEFORE YOU DO ANYTHING TO YOUR PHONE********************************************************
First -You NEED to download everything and have it on your PC ready to use !!! DO NOT START WITHOUT DOING THIS.
Second -You NEED to backup your contacts. DO NOT USE MY CONTACTS BACKUP !!! You will not have that app yet so there is no way to restore them. I used an app. called LOOKOUT from the market. You have to install on phone and sign-up on LOOKOUTS web sight and make sure you run a backup of contacts, as well you need to move any apps you want to your PC or SD card. I recommend the PC to leave space on SD Card....Have at least 1GB free on card to be plenty safe.
Ok heres the deal this may or may not be something you will want to do to your phone....DO THIS AT YOUR OWN RISK....This is what I did to turn my phone into a Fascinate even though I was a US Cellular Mesmerize. I WARN THIS WORKS BUT THERE ARE PROS AND CONS TO DOING THIS. To date there is NO, I REPEAT NO WAY to date to go back from this procedure to a MESMERIZE. Someone may have a way but I have not seen or found it yet. I do believe it is only a matter of time before the DEV'S come up with a restore and then you could go back to stock. SUMMARY= THERE IS NO WAY TO DATE TO REVERSE THIS PROCEDURE !!! DO AT OWN RISK !!!
First thing you need to do is download ROM MANAGER from the market and put the App on the SD Card for later install. Next Download this file here>>>>
http://dl.dropbox.com/u/458252/Fascinate Files/update.zip ---- to the ROOT of your SD Card it is a file called "UPDATE.ZIP" "DO NOT RENAME" put that on there and do not remove it you need it do a restore to access Clockwork later. This is where you need to have this located on SD. ---- /sdcard/update.zip.
Second you need to download...DI01 update with root and busybox here>>>>http://www.megaupload.com/?d=S7IFCKX0
Important:"DO NOT RENAME" and DO NOT put this on the root of your sdcard as /sdcard/update.zip. That's where clockwork mod lives. PUT IN FOLDER you name what ever on SD Card. You will need to go here later in the post to install this in step#12
/sdcard/"FOLDER YOU NAME"/update.zip.
Next thing you need the samsung drivers for windows for this to work. Those can be found on this thread: http://forum.xda-developers.com/showthread.php?t=779238 [this page has a good write up on how to down load and install.] or direct link BELOW>>>> Thank you DIRRK XDA member.
Download and Install Samsung Drivers to your WINDOWS PC this whole procedure was done on a WINDOWS 7 PC. WARNING: You need different drivers for mac/Linux and I do not know where to get them as I have only a WINDOWS PC.
64bit:
http://www.wikifilez.com/root files/epic4g/usb_drivers_GalaxyS_x64.zip
32bit:
http://www.wikifilez.com/root files/epic4g/SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
*************************AFTER THIS POINT THERE IS NO WAY TO GO BACK PROCEED WITH CAUTION !!! ************************************************
For this next step THANK YOU FALLINGUP SENIOR MEMBER XDA....I have altered his orig. post to give more detail for people, using ODIN please follow my post to do this !!
****************************FROM HERE ON ONLY FOLLOW INSTRUCTIONS IN THIS POST TO DO THIS***************************************************
****************************FROM HERE ON ONLY FOLLOW INSTRUCTIONS IN THIS POST TO DO THIS***************************************************
****************************FROM HERE ON ONLY FOLLOW INSTRUCTIONS IN THIS POST TO DO THIS***************************************************
**************************GET ODIN AND ALL FILES NEEDED BEFORE PROCEEDING DOWNLOAD TO PC FOR USE*********************************************
LINKS ATTACHED TO FILES BELOW.
Next download ODIN and run. Make sure ODIN sees your phone by putting phone in DOWNLOAD MODE by pulling battery LEAVE OUT. Run ODIN. HOLD VOL DOWN AND PLUG INTO PC with cable that came with phone, a yellow rectangle with id# means ODIN sees it----once this is connected DO NOT UNPLUG UNTIL ODIN IS FINISHED. If you do you will see a PC connected to a phone by a triangle this means you prematurely unplugged and you will need to re-flash whichever step failed to flash. It is only OK to unplug once a step is finished and Odin says reset in blue, but you do not need to you can load the next file and go. But I've got steps below so if you are here you didn't read entire post. CAREFUL Now follow step 4.1
ONLY FLASH ONE OF THESE AT A TIME. START WITH THE /SYSTEM ODIN AND WORK YOUR WAY DOWN THE LIST.---You do not just flash the pit file it is used with the other files like system,kernel,and recovery. ****FILES BELOW STEPS****READ ENTIRE POST BEFORE USING ODIN AND KNOW THE RISKS*************************************
************************ONCE YOU FLASH ANYTHING YOU CAN NOT GO BACK YOU WILL BRICK YOUR PHONE**********************************************
************************ONCE YOU FLASH ANYTHING YOU CAN NOT GO BACK YOU WILL BRICK YOUR PHONE**********************************************
Steps:
1. Pull battery from device
2. Open Odin on desktop
3. Hold volume down button and plug device into computer-This will place the device into download mode
4. Verify device shows up in Odin ---This should be a yellow rectangle with id #----As well the phone will also say download mode with a yellow triangle on it
4.1: Select PIT button
4.2: Select PIT file downloaded from this post and load it into Odin. (I Never loaded the pit file when I did this in Odin and worked fine for me but from what I understand it is good practice to do so to Quote a post ---"You need to load the pit file into Odin---Missing these steps usually results in major FC hell issues." Thanks PHOENIXPATH senior member XDA
4.1: To Flash the "Stock-i500-VZW-System.tar.md5" file you,
5. Click "PDA" button in Odin ---MAKE SURE YOU ONLY USE PDA "DO NOT USE PHONE" YOU HAVE BEEN WARNED!!
6. Select "Stock-i500-VZW-System.tar.md5" from where you downloaded it
7. Click "Start" This will reboot your phone when complete. This flashes both the kernel and the recovery partition to enable you to flash update.zips signed with test keys. ---When done ODIN should say reset leave pit alone and load next file of the three needed to be flashed.(YOU MAY NEED TO UNPLUG and REDO STEPS 1-4 AGAIN)and jump/proceed to step#8 and continue on.
8. Flash "Stock-i500-VZW-Kernel.tar.md5" when done says reset move to next step.
8.1 Flash "Stock-i500-VZW-Recovery.tar.md5" when done says reset move to next step.
9. Flash "CWMrecovery.tar" ----THANK YOU JT1134 Senior member XDA
10. Replace the battery and Boot in to Recovery= HOLD VOL UP + VOL DOWN same time and PRESS POWER, all three need to be pushed to enter recovery.
11. In recovery navigate UP=vol. up/ DOWN=vol. down /ENTER=home key----You need to select "apply sdcard:UPDATE.ZIP" on ROOT of SD Card to enter the next recovery screen.
12.In this recovery "CLOCKWORK RECOVERY" navigation is different UP/DOWN=SAME but ENTER=power key---you need to navigate to the "ADVANCED" and then apply "WIPE DALVIK CACHE" when done select "REBOOT RECOVERY" (brings you to stock recovery) navigate to "WIPE DATA/FACTORY RESET" once done go to "APPLY SDCARD UPDATE.ZIP" then "INSTALL ZIP FROM SD CARD" once there select "CHOOSE ZIP FROM SD CARD" navigate to the folder "YOU GAVE A NAME TO" and inside is the 2nd "UPDATE.ZIP" you put there and select it...wait until it is finnished...once done.."GO BACK"and"GO BACK AGAIN" then select "REBOOT SYSTEM NOW"
13. Enjoy your stock Fascinate phone with DI01 update and root and busybox . You still will have phone call ability but a couple of apps like contacts backup and vcast are "Verizon" and we at US Cellular can not use. But once you install custom ROMS in Rom Manager you will be able to get roms with them removed or get apps to shut down/freeze them and sub. them out.
Alot of the ROMS have apps taken from the MESMERIZE so this is not really an issue at least not to me.
INSTALL ROM MANAGER FROM SD CARD OR LOAD TO PHONE FROM PC AND INSTALL ON PHONE......
NOW GO INTO ROM MANAGER AND "BACKUP CURRENT ROM" so any changes made from here you can get back to this point.....once done you can NOW LOAD CUSTOM ROMS,KERNELS AND ENJOY THE HELL OUT OF YOUR "FASCINATED-MESMERIZE"
Buy the latest PRO version of ROM MANAGER and use to upgrade kernels thru clockwork or load roms in rom manager......
These are the files to put in ODIN PDA Flashing one at a time with the PIT file. ONLY USE PIT AND PDA......You have been warned again. PS-NEVER DUMP IN ODIN,and do not check anything but PDA AND PIT...there are things checked in ODIN when it loads leave them alone.
Download: "To PC for use in ODIN before you begin"
Odin: http://dl.dropbox.com/u/458252/Odin Files/Odin3 v1.3.exe -This is program to use to flash.
Odin Restore file for system: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-System.tar.md5 -----THIS IS FIRST.
Odin Restore file for kernel: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-Kernel.tar.md5 -----THIS IS SECOND.
Odin Restore file for recovery: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-Recovery.tar.md5 ----THIS IS THIRD.---this is just to be safe
Odin Clockwork recovery file: http://dl.dropbox.com/u/458252/CWMrecovery.tar ------THIS IS FOURTH ONE I FLASHED.
PIT file for use in Odin Restores: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-pit.pit ----THIS IS PIT TO USE "WITH" ABOVE FILES.
*************************THANK YOU TO XDA WITHOUT YOU THIS WOULD NOT BE POSSIBLE**********************************************************
LINKS REFERENCED FROM XDA's WEBSITE THANK YOU AGAIN XDA MEMBERS !!! YOU GUYS ROCK !!!
http://forum.xda-developers.com/forumdisplay.php?f=721
http://forum.xda-developers.com/showthread.php?t=782204
http://forum.xda-developers.com/showthread.php?t=790004
http://forum.xda-developers.com/showthread.php?t=790085
http://forum.xda-developers.com/showthread.php?t=779238
http://forum.xda-developers.com/showthread.php?t=789868
http://forum.xda-developers.com/showthread.php?t=788099
IF YOU LIKE THIS LEAVE ME SOME FEED BACK PLEASE.....................THANKS AND ENJOY........ANDROIDMAN
EXTRA NOTE: DO NOT TRY THIS WITH ANYTHING OTHER THAN THE SCH I-500 MESMERIZE......AS IT HAS ONLY BEEN DONE ON THAT MODEL..........
FLASHING ANY OTHER GALAXY S VARIANTS ODIN FILES WILL BRICK YOUR PHONE !!!!!!!!!
How odd.
Why would you want to make your phone a fascinate? Most of us went the other way in order to debing.
Sent from my SCH-I500
lowkee said:
How odd.
Why would you want to make your phone a fascinate? Most of us went the other way in order to debing.
Sent from my SCH-I500
Click to expand...
Click to collapse
Because There is no way mainstream to use clockwork or rom manager. Hense you can only root, thats it without this.
lowkee said:
How odd.
Why would you want to make your phone a fascinate? Most of us went the other way in order to debing.
Sent from my SCH-I500
Click to expand...
Click to collapse
My thoughts exactly?! I thought people that had a fascinate were wishing it wasn't so fascinatish?
Whatever floats your boat I guess.
JT
danrosinski said:
Because There is no way mainstream to use clockwork or rom manager. Hense you can only root, thats it without this.
Click to expand...
Click to collapse
Correct, No Way of FLashing ROM MANAGER so you can apply the first update.zip
You Can Flash but when you apply the update to a MESMERIZE you get E:signature verify fail -hence No Clockwork, NO Roms. No Way to Customize
jtsharps said:
My thoughts exactly?! I thought people that had a fascinate were wishing it wasn't so fascinatish?
Whatever floats your boat I guess.
JT
Click to expand...
Click to collapse
When I orig. did this I had No Choice, This is something that I had to do...and Thankfully Worked just thought I would Share because now I can Use CLOCKWORKMOD and ROM MANAGER and customize my phone as if it were a Fasinate.
lowkee said:
How odd.
Why would you want to make your phone a fascinate? Most of us went the other way in order to debing.
Sent from my SCH-I500
Click to expand...
Click to collapse
Did you read the entire post I had NO choice as stated in the beginning....Thank You.
Can't link it now but doesn't Koush have a post on compiling Clockwork for new phones?
Sent from my Voodoo-powered Fascinate with XDA
s44 said:
Can't link it now but doesn't Koush have a post on compiling Clockwork for new phones?
Sent from my Voodoo-powered Fascinate with XDA
Click to expand...
Click to collapse
If he dose I havent seen it can you throw that up for everyone?
androidman78 said:
If he dose I havent seen it can you throw that up for everyone?
Click to expand...
Click to collapse
Now I'm home, so here's the post.
Awesome job. Glad you got it working. Now all we need its a way to reverse these steps so us fascinate users can go to 'stock' mesmerize.
(...or better yet, stock android...)
Sent from my stupidfast blackish hole...
What are the other possible applications for this?
PhoenixPath said:
Awesome job. Glad you got it working. Now all we need its a way to reverse these steps so us fascinate users can go to 'stock' mesmerize.
(...or better yet, stock android...)
Sent from my stupidfast blackish hole...
Click to expand...
Click to collapse
Yea, was worried origionally that I was screwed but its a draw/Im happy its only a matter of time before the Fasinate users will be able to go stock mesmerize because this SHOULD?see no reason why not, go both ways.
I know that Sprint is doing an I-500 can we go there too, at least for apps and features. I wonder? And what about the 4G...USC and VZW are 3G would switching/Moding give any advantages I think NOT but still wonder how much of that speed is controled by phone software. I really think its all the network but not 100% sure.
Post above looks interesting the one for Koush's site am checking it out now....Thanks
Sent from my Stupid Fast Blackhole of a Fasinated-Mesmerize
Just need the odin files for the mesmerize.
Sent from my stupidfast blackish hole...
PhoenixPath said:
Just need the odin files for the mesmerize.
Sent from my stupidfast blackish hole...
Click to expand...
Click to collapse
Got any open space to host?
It's called dropbox.
PhoenixPath said:
It's called dropbox.
Click to expand...
Click to collapse
3 hours to upload that small of a file... Dropbox blows for something like that. We'll see.
So i have clockwork working on my mesmerize and running jts super clean but does this allow you to use all facinate roms and kernels on the mesmerize? if so i wanna try this
so if i did this and i used clockwork to perform a backup before i did this could i possibly just restore that backup and have it be a mesmerize again?
and it was said there are pros and cons of doing this? the pros are great but what are the cons besides not being able to go back to stock mesmerize????
tweakymattman said:
and it was said there are pros and cons of doing this? the pros are great but what are the cons besides not being able to go back to stock mesmerize????
Click to expand...
Click to collapse
I can't get mms working....
Sent from my SCH-I500 using Tapatalk
This makes about 100 times more sense.
http://androidforums.com/behold-2-all-things-root/54424-creating-custom-roms-backups-odin.html

[Q] Someone please help

I have rooted my vibrant with axura. How do i un-root it so it would go back to stock? or if there is a post like this out there can someone show me the link? thanks!
sk90 said:
I have rooted my vibrant with axura. I unrooted it using zroot. then i restored to factory settings. now it wont fully load up. it turns on, goes to the vibrant sign, then to the axura sign and turns off. what should i do?
Click to expand...
Click to collapse
why did you unroot?
EDIT: You don't need to unroot if you want to go back to stock...just use Odin
Mr. Apocalypse said:
You don't need to unroot if you want to go back to stock...just use Odin
Click to expand...
Click to collapse
+1
You can also use the one click root tool to unroot.
sk90 said:
I have rooted my vibrant with axura. How do i un-root it so it would go back to stock? or if there is a post like this out there can someone show me the link? thanks!
Click to expand...
Click to collapse
Information from s15274n
When you want to go back to stock, you can go the development section and find a stock JFD ODIN/zip, but I always just use the ALT METHOD below. It's always worked well for me personally.
This method will give you a stock Froyo + Root (no further action needed).
*** ALT METHOD ***
STOCK JK2 WITH ROOT ALREADY ENABLED
This method can be used to return to stock if needed. It can also be used for someone who is stock and wants to get root. If you are using this to gain root, please pay attention to the very last step about wiping
I prefer to use the method above to root, and this to return to a stock rom.
You can follow ipeench's thread (CLICK HERE). Be sure you download the right zip for the 2.2 leak (it is not obvious to me in the post). This is the thread used in the video (see video below):
UPDATE: When you download the files from the link above for JK2+root, there is an older version of ODIN included in that zip. I would NOT use that version of ODIN. Please download this updated version (it has never caused an install hangup on me like some older ODIN version can do):
ODIN 3 V1.7
Below are some videos I took last night. They are NOT the best, but hopefully it helps. One thing that may sound confusing is when I show how to use ODIN, at the end I state that I'm going to show how to root... well, this version already has root, so no further action is needed for obtaining root (thanks Eugene)!
This is a video of me going to the leaked JK2 via ODIN
http://www.youtube.com/watch?v=fMSF-SumO3k
Here is another youtube video showing ODIN. It is flashing the JFD build (what the Vibrant originally shipped with):
http://www.youtube.com/watch?v=AnY7P14JSWQ
Here are the written steps you can follow if the video was not helpful:
I DID NOT INCLUDE THIS AT THE END OF THE VIDEO, BUT YOU MUST DO THE FOLLOWING:
Go into Recovery... Wipe user data & cache
then reboot
Now you can enjoy 2.2
Click to expand...
Click to collapse
odin is samsung's proprietary/internal software that can hard flash your device. odin may be used whether or not you have already rooted your device, and it will absolutely clear all your data in your internal sd card. to operate odin, you first need to obtain a rom flashable via odin (usually zipped in .tar file).
alternatively you can revert back to stock kernel/rom while you still have your device rooted. you can obtain a rom flashable via clockworkmod recovery (cwm), a bootloader software that can be installed on a rooted device, and just flash it. once you flashed your device back to stock rom, then you can unroot it so that your device is 100% back to stock.
all rom packages both odin flashable and cwm flashable have kernels, roms and modems in them.
look into sticky threads in this and development forums and you will be able to find detailed instructions on how to flash using either odin or cwm recovery. do some research and get yourself familiarized with the process. it's pretty simple as you've already flashed.
Go download ODIN and browse the forums for the files you will need. There is 512.pit file you will need and you need the JFD.tar file to enter into the PDA section of ODIN. Once ODIN is downloaded open, it's an exec. file. Once ODIN is open turn phone off. Plug USB cable that came with your phone into drive, hold down both Volume Down and Volume Up buttons and plug cable into phone. Display should say Download Mode in Yellow and have Android with a shovel. On your computer you should see in first box a Com Port open up either COM 3 or COM 4, doesn't matter. You should see some check boxes underneath the COM. Check the one for Repartition. Click the .PIT button and search for the 512.pit file you downloaded and click the PDA button and search for the JFD.tar file and click start. It will run through the process and when it's done you will be back to stock like you took the phone out of the box. Any questions and I can email you all the files and instructions.
Sent from my Vibrant running GingerCloneR2

[Q] Borked Partition, cant odin back to stock. Boot loop. Help?

This thread has a similar issue to what im having, but ive branched off elsewhere...
http://forum.xda-developers.com/showthread.php?t=883944&highlight=Rom+Manager+partition+recover
The story: Ive had a rooted vibrant for a while. Im no linux noob, either. I was having some issues so i decided to try Darky's Toxic rom...worked GREAT! I made a clockwork backup...now i felt it safe to start to play.
I was having media scanner issues...so i decided to repartition my storage spaces (and to get rid of the avatar movie)...but i used ROM manager...clearly by mistake. whoops.
So after MUCH trouble with boot looping...i was able to ODIN to Eugene's Froyo that doesnt brick. The STOCK rom wouldnt give me video...just hung after the Galaxy S boot seq. Im assuming thats a voodoo issue?
Anyway...able to get Eugene's on there...and i was smart and made a back up of both storage spots. I reloaded CWR, and tried to restore to the backup of Toxic i made with no luck. Matter of fact, i cant get any other ROM to load that ive tried.
Any suggestions to get my restore point back up and running? I thought about trying to go stock...but like i said, i couldnt get to stock through ODIN.
Couple of Ideas........ I am assuming you can get into download and recovery.
If you can get into recovery, clear cache, wipe dalvik then, pull battery and get into download, then try odin back to stock, remember to check repartition.
Or try Heimdall, sometimes it works when Odin does not. But if you can get into download then, there is a way (or some combo of ways) to get you back to stock. Just be patient and logical......... you will get it..........good luck
I CAN get into download and recovery...and was able to get CWR back on...thankfully.
I have tried every combo of wipes i can think of.
If i flash to true stock 2.1...i get black screen with lit buttons.
If i flash to Eugene's...i can boot into a ROM build with no internal storage, therefore no way to install apps.
I just came across this and tried it...with no new results.
Fix 1:
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! BAM!
Click to expand...
Click to collapse
I'll try your suggestion now...thanks!
Still no luck. Same thing...black screen, with lit buttons.
Did i officially brick this thing?! haha...i thought it barely possible with the vibrant.
I tried flashing the JI6 rom too....still no go.
Anything?
When you Odin to stock, what tar are you using? When you repartition, do you use the pit file?
I suggest that you use the JFD Odin image and repartition using 512.pit. I have also heard of some people having more success with Odin when they dont have an SD card or SIM card in the phone (this may be an old wives tale.) Good luck.
Same problem
I had this exact issue two days ago and after many attempts with Odin, like you, the only ROM I could load was Eugene's. Re-Partitioning with Odin had no affect, stock wouldn't work and wiping everything had no affect. With Eugene's it would show no space for apps and wouldn't hold any settings if the phone was rebooted. It seems that clockwork mod is actually removing the apps partition and no tool I could find would actually recreate it. I searched quite a bit and found several posts all with the same issue and in every case they had to replace the phone. Luckily I am still under warranty so T-Mobile is replacing it. I don't know if the Clockwork Mod developer has a thread on here, but that "feature" needs some work or it needs to be removed.
kadashti said:
When you Odin to stock, what tar are you using? When you repartition, do you use the pit file?
I suggest that you use the JFD Odin image and repartition using 512.pit. I have also heard of some people having more success with Odin when they dont have an SD card or SIM card in the phone (this may be an old wives tale.) Good luck.
Click to expand...
Click to collapse
Yes, ive used both the vanilla JFD tmo tar, and the JI6 tar. Neither worked. Triend both the 512 and the 513 PIT file. 512 for the first HUNDRED times...then 513 for the hell of it, since at this point, i was getting nowhere.
And thanks pamulli, thats what im basically resigning to..i just needed to hear it from another person.
REMINDER: It is as easy as fat fingering the keyboard to totally screw your phone. Click carefully!

[Q] Flashing ROM

Okay so Im trying to flash a rom, I have rooted it with super one click method. Im trying to flash a rom.
Usually in all the other phones that I have rooted and flashed sensation mt4g g2 g2x you root it then simply move on to CWM then you flash a recovery. It seems like the recovery isnt sticking..
I have looked for guides on how to flash. But a lot of them say there outdated.
Any ways if someone could give me a clue and point me in the right direction that would be lovely thanks!
Jerald2 said:
Okay so Im trying to flash a rom, I have rooted it with super one click method. Im trying to flash a rom.
Usually in all the other phones that I have rooted and flashed sensation mt4g g2 g2x you root it then simply move on to CWM then you flash a recovery. It seems like the recovery isnt sticking..
I have looked for guides on how to flash. But a lot of them say there outdated.
Any ways if someone could give me a clue and point me in the right direction that would be lovely thanks!
Click to expand...
Click to collapse
you need to odin a stock modified kernal.tar in order to get cwm to stick. Here it is:
http://goo.gl/QCYxT
If you need odin and samsung drivers, there in my guide here:
http://forum.xda-developers.com/showthread.php?t=1238070
Remember to only put the file in the PDA function of odin...
Okay thanks very much this odin thing is very different from what I'm used to.
Am I going to extract these files? obviously not drivers, but Odin files I extracted. Am I going to extract the kernal.tar?
I'm trying to install Miui its 2.3.4 so im guessing that other guide is the right one can someone confirm that this is safe?
http://forum.xda-developers.com/showthread.php?t=1212239
Sent from my HTC Sensation 4G using XDA App
Jerald2 said:
Okay thanks very much this odin thing is very different from what I'm used to.
Am I going to extract these files? obviously not drivers, but Odin files I extracted. Am I going to extract the kernal.tar?
I'm trying to install Miui its 2.3.4 so im guessing that other guide is the right one can someone confirm that this is safe?
http://forum.xda-developers.com/showthread.php?t=1212239
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
Yes use that guide
Someone Please please please help. This is my girlfriends phone i finally talked her into letting me root/flash it. Its not going right!!!!
Okay so im following that guide I got to step 4, it said boot up normally. It wouldnt boot up so I kept going.
Got to step 7 and this is what happens. http://www.youtube.com/watch?v=hwQMaQD2x7w
When I first open Clock work it says
E:Cant mount cache/recovery/command
E:Cant mount cache/recovery/Log
E:Cant open cache/recovery/Log
E:Cant mount cache/recovery/Last Log
E:Cant open cache/recovery/Last Log
Someone Please Please help.
edit: your not following the directions clearly... The problem is you continued past step 4 without letting your phone boot up. If you dont follow directions to a T you will brick your phone.
Okay, listen carefully. Go to jt1134's CM7 thread in fascinate development section. Go to the first page, scroll down until you see CWM fixed for CM7, download it. Use Odin to flash full stock ED05 with atlas 2.2 pit file, check the box for repartition, then hit start. Boot up, then power down and take battery out. Flash the CWM fixed for cm7 in Odin, unplug from computer, put battery back in, then (this is important!) hold both volume buttons and the power button until you see Samsung logo, then release. You will then be in the right recovery to flash any MTD ROM. Wipe all three, flash ROM, reboot. Also go to stickies in fascinate development, read "Going from Vanilla GB to anything else" thread. It will give you more details and is properly updated. Good luck!
~~~~There is no spoon~~~~
So where do you suggest I start to get thus thing at least back to stock?
sorry didnt see ya posted there. K I will Give that a shot seriously thank you.
Sent from my HTC Sensation 4G using XDA App
Jerald2 said:
So where do you suggest I start to get thus thing at least back to stock?
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
I gave you the link that provides all that information
---------- Post added at 12:13 PM ---------- Previous post was at 12:12 PM ----------
shag_on_e said:
Okay, listen carefully. Go to jt1134's CM7 thread in fascinate development section. Go to the first page, scroll down until you see CWM fixed for CM7, download it. Use Odin to flash full stock ED05 with atlas 2.2 pit file, check the box for repartition, then hit start. Boot up, then power down and take battery out. Flash the CWM fixed for cm7 in Odin, unplug from computer, put battery back in, then (this is important!) hold both volume buttons and the power button until you see Samsung logo, then release. You will then be in the right recovery to flash any MTD ROM. Wipe all three, flash ROM, reboot. Also go to stickies in fascinate development, read "Going from Vanilla GB to anything else" thread. It will give you more details and is properly updated. Good luck!
~~~~There is no spoon~~~~
Click to expand...
Click to collapse
all that info is in the link i provided for him
here is the going back to stock section in that link I provided.
* How to get back to stock after flashing any rom, follow these steps:
Step 1: Download this stock ed05 rom package by pentafive to your pc. you will need to unzip with 7zip or winrar, http://api.viglink.com/api/click?fo...144787558901&jsonp=vglnk_jsonp_13175749481381
Step 2: power off phone and pull battery
Step 3: open odin on your computer
Step 4: plug in factory usb cable and hold the volume down button. Yellow
triangle should appear saying "download mode"
Step 5: click on PDA in odin and find the vzw_official ed05.tar file(rom) you downloaded to your computer in step 1
Step 6: click on PIT in Odin and select the atlas 2.2 pit, it's in the file you downloaded in step 1
Step 7: click start and wait 5min, box in left hand corner of odin will say PASS, then click reset.
Step 8: unplug usb cable, put battery back in and boot phone.
You are now back to stock ed05.(verizon's latest release for the Fascinate)
shag_on_e said:
2.2 pit file, check the box for repartition, then hit start. Boot up,
Click to expand...
Click to collapse
When you mean boot up, what do you mean like start it normally? The last guide said that and it wouldnt boot up.
Also Is this it? http://forum.xda-developers.com/showthread.php?t=1190668?
That Link you gave me when I click on it. I only get "Parameter 'out' is required." bad link?
you can go back to original link on my first post and get everything there lol, but being the nice guy I am I went ahead and fixed the link.
Alright. So I got followed your guide and got cwm installed. I made a nandroid. I wiped everthing and flashed MIUI It booted up and runs. So im on step 8 on http://forum.xda-developers.com/showthread.php?t=1212239
When I try and install a app it says insufficient storage on device.
Is this because I didnt install ec09-modem.tar.md5 and GBBootloaders.tar?
I know that im not going to need to install Gaps. But I want to make sure these things ^^ up there are the right things for my rom.
I went ahead and risked it haha. It worked. Okay so now.. It says that I dont have root. Would I be okay to use the superone click method again to root it?
Jerald2 said:
Alright. So I got followed your guide and got cwm installed. I made a nandroid. I wiped everthing and flashed MIUI It booted up and runs. So im on step 8 on http://forum.xda-developers.com/showthread.php?t=1212239
When I try and install a app it says insufficient storage on device.
Is this because I didnt install ec09-modem.tar.md5 and GBBootloaders.tar?
I know that im not going to need to install Gaps. But I want to make sure these things ^^ up there are the right things for my rom.
I went ahead and risked it haha. It worked. Okay so now.. It says that I dont have root. Would I be okay to use the superone click method again to root it?
Click to expand...
Click to collapse
power off and pull battery, get back to dl mode, open odin and install the eco9 modem and gb bootloaders. reboot and see if everything is working. If you still dont have root and you may not, follow what directions below.
- superoneclick wont work.
-push this file below to you sd card
- long press the power button and select recovery(do not three finger into recovery once your on a mtd rom)
- install zip from sd like you did the rom.
http://dl.dropbox.com/u/25089906/su-2.3.6.1.x.zip
-you should now have root
Okay Ill do that THANKS SOOOOO MUCH!!
Is Clock work going to stick? Do I need to install rom manager and flash the newest one?
I tried to go into CMW through long press home and click recovery. It says Multiple packages tries to request sytem root permission wich is disabled by default to ensure system security. If you need to enable it, please go to setting in super user.
Witch im not seeing anyting
Jerald2 said:
Okay Ill do that THANKS SOOOOO MUCH!!
Is Clock work going to stick? Do I need to install rom manager and flash the newest one?
Click to expand...
Click to collapse
The kernal is already modified to allow cwm to stick and you should already have the latest kernal with the version of miui that you flashed. Im not a fan of rom manager, but thats just my opinion. Fwiw the only other kernal I would mess with is the glitch kernal. That has to be installed via odin. go into the dev section and look up the glitch kernal thread and read up on it. But before you do any of that, just get the phone up and running for a day, then go from there.
Yeah haha I just need to get root so I can back up her stuff.
But its not letting me get into recovery because it says that I dont have root. How am i supposed to get into it?
Jerald2 said:
Yeah haha I just need to get root so I can back up her stuff.
But its not letting me get into recovery because it says that I dont have root. How am i supposed to get into it?
Click to expand...
Click to collapse
If it won't let u get into cwm by long pressing power button then power phone off and try three finger into recovery(not suppose to do that with a mtd rom tho). Your only other option I know of is:
-odin back to stock
- boot up once then power off
-odin cwmall.tar from my guide
-three finger boot into recovery
-install root.zip from post 14
-reboot then power off
-odin cwm4
-three finger boot into recovery
-install miui.zip from sd
-reboot
-follow directions from step 8 on in the vanilla guide.

Categories

Resources