Hey, i am trying to figure out what type of charger should i get for Vibrant GPS and accessories in my car. Ive read that using a normal charger such as 500mAH doesn't actually "charge". The Vibrant would actually use more than the charger could charge. I read in the other Galaxy S forum(i9000) that someone used a 2000mAh but never replied after that. Would going that high with a charger damage the battery?
I think you are good to go with a 1,000mAh. The 500mAh will charge a phone overnight without warming up the phone but its not enough juice if you are having the screen on, using GPS, etc.
The phone will only use what it needs to. 500ma is standard for USB, 1000ma is the norm for a wall charger. Its doubtful that the phone would use more than that, but nothing would be hurt by trying, as long as it is a 5V USB charger.
To expand on what Saiboogu wrote... the amperage rating of the charger is the capacity of the transformer -- how much it *can* supply, not how much it *will* supply. The phone decides how much juice to pull.
It's voltage that you have to be careful with. You want to buy a charger that outputs *only* 5 volts.
Related
Alright, so I have a mini USB car charger that is rated at 2.0A (got with GPS) and I just want to make sure the extra amperage is not going to charge my battery too quickly and then kill it in the process. All I have to go on is that my wall charger is capable of only 1.0A and the computer USB is on the level of mA. Does anybody have a car charger or know the maximum amperage possible that these phones can take?
Thanks in advance.
Its to Strong ! I have Crash a PDA with 1.5A
I've used a 2.0a charger but noticed that the battery didn't charge right.
On that note, also noticed that a .5a or 500mA charger after about 6 months killed my battery. (burned out and won't take a full charge anymore)
Recommendation is to stick to 1.0A charging as much as possible as the Wizard's charge circuit is designed at 1.0A charging and monitoring.
DOESN'T MATTER ..if u know the basic Ohms Law..its the max capacity of the charger.(or any source) the current regulating circuits will take care of the real charging current fed to the battery
I charge my phone on my computers USB connection all the time, all computers have a maximum of 500mA USB current.
Amps are pulled from the charger, not pushed to the phone.
Voltages are pushed to the phone, not pulled from the charger.
If the phone draws too much current from the charger, the voltage drops to a point where the maximum power (P (Watt) = U (Voltage) * I (Amps)) of the charger isn't exceeded.
According to the USB specification you need at least 200mA with 500mA recommended +5VDC.
More is never a problem, you could even use a 50A power supply without breaking your phone. Practically spoken: I wouldn't do that.
huh?
I have messed up a few devices before by putting the wrong charger on the device (2.0 amp charger on a droid eris and 1amp charger on the MOTOACTV) Is this a problem with the device's charging circuit? In general it should only pull up what it needs to charge but my devices were messed up?
I returned the first MOTOACTV after it wouldn't leave the boot screen and the second one I got acted funny on 1 amps as well. It charged fine on .75amp charger that came with the device but when I put it on my HTC Dinc charger it shot up from 10% to 20 to 30 etc. all within minutes. Hope I didn't mess this one up too.
Just trying to figure out what the deal is. My phone for sure charges faster when connected to 1amp vs .5amp (computer). This makes sense I understand because the device is able to handle 1amp, but I wonder if it would mess up with a 2amp charger.
Thanks!
The last two posts of 2008 are correct. Your phone is capable of drawing more than 500 mA but less than 1000 mA. If the charger is 1A, 1.5A, 2A, or 50A, it won't make a difference to the phone's charging time or life.
Wrong voltage can be bad, but phones are designed to support USB charging, as a minimum, and 1A to 2A is always safe. As was said in 2008, the charger pushes voltage to the battery, but the battery pulls current from the charger.
That's a really good way of describing it
Pushing and pulling current and voltage is a really good way of describing it.. Given that I am theoretically well within the charging parameters, how comes my phone (Galaxy mini/pop) becomes unusable when its charging (touch screen doesnt touch and screen jumps to new screen without touching?) Am I wrecking my phone?
No, your charger is to blame. Maybe it isn't properly grounded. Phones with capacitive touch screens (not the Wizard! but maybe your phone) can get really weird on some chargers. I have a Nexus One with an aftermarket charger that always makes the touch screen go haywire. When I use an HTC charger, the phone has no problem. As far as I know, the damage isn't permanent, it's just that the sensors get confused. When I disconnect from the charger, turn the phone off, then turn it on, all is well.
My wizards were never bothered by chargers, no matter what kind, as long as they were mini-USB, they were the right voltage. The wizard doesn't take as much current as more modern phones, either.
Hmm. Not properly grounded sounds very plausible. Viva mediterranean circuits. Thanks
Usb chargers will be rated at 5v, which is exactly the correct voltage to charge your device. What you want to make sure is you buy the correct "rated" amperage. Not because it will damage your phone. Amperage only exists as a sum of the power used by the device. You want to find a decent 1amp (1000mA) or higher if you wish, rated usb charger. The the mains charger for your phone is only rated at 1amp, so a 1amp charger is adequate. Avoid 500ma chargers as it will take twice as long to charge and gps / satnav applications will drain the battery even when charging at that rate.
Also if you have a new pc, most of the decent boards will specify 1amp charge even when off if it has on/off charge stated on manufacture details.
Newer phones will charge fine with higher amperage
The myth that charging your device at a faster rate will reduce the life of your device’s battery is false!
If you want quicker charging, look for a wall or car charger that delivers 2100 mA of current at 5 volts higher won't matter.... These lithium ion batteries can handle it... It was just back then if you were to try to put a faster charger in an older battery it (in any cases) just won't charge.
Does anyone know of a solar charger that will actually chearge the prime ? i have a freeloader solar charger with an internal 1200mAh battery that can ouput 5v 500mA and a Hymini Wind charger that has a 1200mAh internal storage that can output 5v 850mA
Both of these can alledgedly charge an Ipad but neither of mine seem to have the grunt to kick the charging circuit into life on either the tablet or the dock.
I just I want something that i can use to keep the unit topped off whilst i'm travelling around Greece
Before anyone says it, i understand the limitations of solar charge. from using it for my phone know they take many hours to charge their internal batteries and the loss associated with then dumping that charge into your device.
Not at 5v it won't
You'll need 15v to charge at normal rate, or 12v at a slower rate. 5v it will only charge completely off, and then only very slowly.
i take it that's just the tablet and not the dock ?
Harani said:
i take it that's just the tablet and not the dock ?
Click to expand...
Click to collapse
Either. The maximum input voltage for either is 15v.
ok cheers,
I thought it wasn't charging at all but i've read elsewhere that the charging light will not come on and that it will take up to 16 hours to fully charge on 5v
if that's true then if the solar charger is 1200mAh and is pushing out 500mA then it's only going to be able to charge the pad for just over 2 of the required 16 hours (i think ?) before it's depleted
I'll run some experiments and see exactly how much charge it will put into it overnight but it doesn't seem like it will be a practical thing to use.
I have a dumb question about charging the battery... I'm not very familiar with Li-ion battery technology.
When charging over USB, the USB port can't provide enough amperage to charge the phone quickly. I had my phone plugged in for 3 hours and only got a 20% charge. My original Galaxy (Captivate) has a wall charger that provides 0.7A. The GS3's charger provides 1.0A. I know this phone will charge slower if I use my Captivates charger.
My question... I have a Transformer Prime, and that charger is rated at 1.2A. Will charging with a beefier charger cause any issues with the battery, including but not limited to life on a charge or life period? I can only assume it will get warmer when charging, since I'm pushing more current through it.
Would you charge the battery with a beefier charger? I'm hesitant, but I'm looking for your opinion.
Thanks, and sorry for the dumb question!
-Brian
I have the Transformer too and I interchangeably use the chargers and I have never had an issue on a phone regarding this issue.
However since I have never kept one phone for more than about 6 months I don't know about the long term effects.
I tried to charge my i9100 with an iPad charger once. It hit about 70% and about 120 degrees fahrenheit and then stopped charging. I would say be careful.
Just curious if there is an app or something similar that would show how many amps are being provided when charging through a wall charger/USB powered hub? The reason I ask is that I'm thinking of buying a powered USB 3.0 Hub. The adapter that came with our phone says it's 2 Amp, so I am assuming our phone can pull 2 amps for charging. Just wanted to verify in some way that a 2 Amp dedicated port would really work for this phone.
*Madmoose* said:
Just curious if there is an app or something similar that would show how many amps are being provided when charging through a wall charger/USB powered hub? The reason I ask is that I'm thinking of buying a powered USB 3.0 Hub. The adapter that came with our phone says it's 2 Amp, so I am assuming our phone can pull 2 amps for charging. Just wanted to verify in some way that a 2 Amp dedicated port would really work for this phone.
Click to expand...
Click to collapse
When I get home, I'll download the kernel source and see if I can find out how much power it draws during charging. I doubt however, that it will draw 2A during charging as most chargers are rated to supply more power than the phone will accept.
Yeah, 2A seems like that could melt a battery charging that fast. Someone sent me a private message and told me to try CurrentWidget. I threw that on the phone and it registers as 1A while charging. But it appears like the widget doesn't break it down with decimals. For instance it could be charging with 1.8A and wouldn't know it. I put it in a standard USB port and it reported as charging with 0 Amps but the battery was indeed charging.
I took a quick look at the N7100 (International Note 2) source posted on Github by CM and it looks like AC charger is 650mA, USB is 450mA. It's a little hard to tell what exactly it's using for charging, so I'll try to verify that when I get home and have a chance to take a better look.
*Madmoose* said:
Yeah, 2A seems like that could melt a battery charging that fast. Someone sent me a private message and told me to try CurrentWidget. I threw that on the phone and it registers as 1A while charging. But it appears like the widget doesn't break it down with decimals. For instance it could be charging with 1.8A and wouldn't know it. I put it in a standard USB port and it reported as charging with 0 Amps but the battery was indeed charging.
Click to expand...
Click to collapse
A 3100mAh Lithium Ion battery can easily handle a full 2A charge rate. The ideal charge profile for Lithium Ion is a CC/CV profile, starts at constant current between like 3V and 4V, which most LI batters can take a rate of 1C, meaning it can handle a charge rate of 3.1A, recommended charge rate to achieve the most possible charge/discharge cycles is usually 0.2C so for a 3100mAh battery that would be 620mA. Once the charge gets to the correct voltage it gets to constant voltage and charges until termination current usually in the 100mA range. So yes, it can handle a 2A charge no problem.
Hey there. I very much appreciate that breakdown. Makes me wonder why they dropped the amps so much during charge.
bose301s said:
recommended charge rate to achieve the most possible charge/discharge cycles is usually 0.2C so for a 3100mAh battery that would be 620mA.
Click to expand...
Click to collapse
If this is true (first time I've seen this anywhere), that would line up great with the 650mA max charge rate I found. Also, I downloaded the VZW source, and it doesn't look to significantly different from the N7100 source, at least as far as the charger stuff is concerned, so I would say they both probably have a max charge rate of 650mA.
I appreciate the info and time you both put into this. I guess it means a 2A usb port will be slight overkill. Even changing the charge rate to a higher value seems to indicate a lower battery life. Makes you wonder how apple did it's math for the ipads charge rate. The battery must be huge to accommodate a 1.1A charge rate. Or they are sacrificing battery life for fast charging.
Wont the kernel dictate the charge rate no matter what the charger is rated at?
If the kernel is set for a charge rate of 650mA (0.650A), then why does the Note 2 have a more powerful 2A wall charger, while the GS3 has a 1A wall charger.
FAUguy said:
If the kernel is set for a charge rate of 650mA (0.650A), then why does the Note 2 have a more powerful 2A wall charger, while the GS3 has a 1A wall charger.
Click to expand...
Click to collapse
The original nook color 7" came with a 2A wall charger and that was 2 years ago... both my note 2 and nook color charge about the same rate (quick to 99% and slow to 100). The charger is probably cheaper to make at 2A rather than anything and plus it could be used to charge future devices. Also if you used a 1A charger to charge the note it might possibly get warm/hot from running at near full capacity.
Im using my OLD blackberry 700mA wall charger to charge the phone at night while im sleeping. No problems with heat.
Hi all,
When I use the charger that came with the HTC One my phone charges great, rapid.
But when I use any other charger that I have in my home/office it charges very slow. Even with a 2.1 amp charger!
The charger that comes with the phone has an output of 1 amp.
I've tried multiple other chargers (1 amp and 2.1 amp) and they all trickle charge.
Anyone else noticing this?
Thanks
Joe
I'm using old charges at home and in the office and it did seems slow but had not heard of rapid charge. Will the phone indicate this rapid charge mode? If not, is it real?
I'm getting slow charging even on the stock HTC charger. Not sure how I can enable this rapid charge cause 4+ hours from 0-1% to full is a bit ridiculous.
use orginal charger is best , maybe it has some relationship with your battery life
If anyone is coming from phones with smaller batteries, remember the larger the capacity the long it takes to charge.
I use the cable and charger from my Nexus 7 and it charges fast. Off my USB it is slow.
Real AC chargers have two pins shorted. You can hack a USB to micro USB cable and short the same two pins to enable AC charging with any adapter, wall, USB, or car. Should be pins 3+4, but don't hold me to that.
Sent from my HTC One using xda app-developers app
flooty333 said:
Hi all,
When I use the charger that came with the HTC One my phone charges great, rapid.
But when I use any other charger that I have in my home/office it charges very slow. Even with a 2.1 amp charger!
The charger that comes with the phone has an output of 1 amp.
I've tried multiple other chargers (1 amp and 2.1 amp) and they all trickle charge.
Anyone else noticing this?
Thanks
Joe
Click to expand...
Click to collapse
Try to change your phone
c5satellite2 said:
Real AC chargers have two pins shorted. You can hack a USB to micro USB cable and short the same two pins to enable AC charging with any adapter, wall, USB, or car. Should be pins 3+4, but don't hold me to that.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
i've done exactly this, and damned if the One still refuses to draw more than ~500 ma off of anything but the 2.1 A wallwart it came with (i don't have any others to try with). i'm about to dig out an old inverter to see if that will actually work. wish i'd paid more attention to my EE dad when i lived at home; i've gotten a serious crash course in this stuff while trying to get my One to charge in my car, when it's on.
edit: so i got my old inverter out, and spent about 15 minutes testing. i used the 2.0A adapter that came with my Nexus 7 to test, as well as the 3.1A Mediabridge adapter i got here. my phone was at about 45% when i started testing. unplugged, Battery Monitor Widget reported a drain of anywhere between 500ma and 650ma (running Ingress, wifi on). plugged in to the Mediabridge adapter showed, at best, a drain of 50ma. the Nexus adapter plugged in to my inverter charged at a fairly consistent ~120ma. i didn't touch my phone the entire time.
i left my Nexus 7 at work so i can't use it to repeat the test, but i will do so tomorrow. the cable i'm using is this one. i'm not crazy about having a ridiculous DC-AC inverter in my car for my phone, but if that's what i have to do so it can be used and not drain, then so be it. admittedly, i don't really understand these things enough to explain these variations, but i plan on learning ASAP. perhaps somebody else can shed some light on why the device charges different, and how it identifies an AC-USB adapter vs a DC-USB adapter.
sluflyer06 said:
If anyone is coming from phones with smaller batteries, remember the larger the capacity the long it takes to charge.
Click to expand...
Click to collapse
Math doesn't support what is happening though. Phone has a 2300mAh battery. The OEM charger outputs 1A (1000mAh)
At most, it should be around 3 hours for full charge, when in fact it is closer to 4-4.5 hours. It's the last 10% that is the issue, it will trickle charge to 100% rather than rapid charge.
nest75068 said:
Math doesn't support what is happening though. Phone has a 2300mAh battery. The OEM charger outputs 1A (1000mAh)
At most, it should be around 3 hours for full charge, when in fact it is closer to 4-4.5 hours. It's the last 10% that is the issue, it will trickle charge to 100% rather than rapid charge.
Click to expand...
Click to collapse
Yes, I think that's exactly what the HTC does... I read a pretty good article recently about Li-Ion batteries that talks about how trickle charging is the best for battery life, and it wouldn't surprise me if HTC got a little aggressive the way the this phone charges since we can't swap the battery ourselves.
I'm trying one last car charger, which matches the wattage of my Nexus 7's 5Vdc/2A AC adapter (which I've had the best luck with, when charging the phone while in use): http://www.amazon.com/gp/product/B009TBF7IG/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
If that doesn't work, I'm going to put a 300W inverter in my car with the AC adapters themselves and stop buying stinking DC adapters. This phone clearly pays very close attention to the wattage available from whatever it's plugged in to.
veener79 said:
I use the cable and charger from my Nexus 7 and it charges fast. Off my USB it is slow.
Click to expand...
Click to collapse
Same here, 2a Nexus 7 brick with a long Logitech USB cable, much faster than stock (and longer)
Harbinger1080 said:
Yes, I think that's exactly what the HTC does... I read a pretty good article recently about Li-Ion batteries that talks about how trickle charging is the best for battery life, and it wouldn't surprise me if HTC got a little aggressive the way the this phone charges since we can't swap the battery ourselves.
I'm trying one last car charger, which matches the wattage of my Nexus 7's 5Vdc/2A AC adapter (which I've had the best luck with, when charging the phone while in use): http://www.amazon.com/gp/product/B009TBF7IG/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
If that doesn't work, I'm going to put a 300W inverter in my car with the AC adapters themselves and stop buying stinking DC adapters. This phone clearly pays very close attention to the wattage available from whatever it's plugged in to.
Click to expand...
Click to collapse
I'm fortunate my car has a built in inverter that I use for charging my phone.
nest75068 said:
I'm fortunate my car has a built in inverter that I use for charging my phone.
Click to expand...
Click to collapse
My next car will too, because I can only imagine that power requirements for these devices is going to increase.
That said, I think I have a winner, and instead of retyping my posts, I'll just link to that thread instead: http://forum.xda-developers.com/showpost.php?p=41797839&postcount=6
Since the snap Dragon 600 has fast charging capabilities, why didn't HTC Include it in the kernel??? I've noticed my 2500 mAh note battery charges faster than my 2300 MAH HTC one
Sent from the Sexiest Android Device (HTC One)