Related
Hey, first post here. I've tried searching for people with similar issues but I couldn't find anyone. I got my Cingular 8525 yesterday and I am trying to upgrade to WM6. I followed the guide on flashing it to Hard SPL v6, since I have SPL- 1.06 and I can't seem to get past the screen where I have to choose which bootloader version I have. Mine is not listed on there, and it won't even let me choose some of the other options. I can only check "Is this Hard-SPL?" and the "Force Ussing SPL" option. I thought about upgrading to SPL1.04 then to 1.4, but I am not sure as I don't want to brick my phone. Any suggestions? Thanks. Sorry if this has been covered once again, but Ive been looking for about 2 days and can't seem to find it.
Here is part of a guide written by Mrvanx. Following the guide is highly recommended. You should use the sspl option. It will load SSPL by Des which will in turn load Hard SPL V6 to your device. Good luck flashing!
The autodetect button didn't work for you??? You should be able to use the Force option to upgrade to oli's SPL and you should have no problem. If you're unsure, follow this guide: http://www.mrvanx.myzen.co.uk/hermes_guide/HardSPL.html
Also, there's lots of great info here in general: http://www.mrvanx.myzen.co.uk/hermes_guide/
Thank you. The version I was looking at www.mrvanx.myzen.co.uk/hermes_guide/black/HardSPL.html
told me something else. Thanks for your input. I'll flash it right away.
a7xsoad said:
Hey, first post here. I've tried searching for people with similar issues but I couldn't find anyone. I got my Cingular 8525 yesterday and I am trying to upgrade to WM6. I followed the guide on flashing it to Hard SPL v6, since I have SPL- 1.06 and I can't seem to get past the screen where I have to choose which bootloader version I have. Mine is not listed on there, and it won't even let me choose some of the other options. I can only check "Is this Hard-SPL?" and the "Force Ussing SPL" option. I thought about upgrading to SPL1.04 then to 1.4, but I am not sure as I don't want to brick my phone. Any suggestions? Thanks. Sorry if this has been covered once again, but Ive been looking for about 2 days and can't seem to find it.
Click to expand...
Click to collapse
I grey out the options to make it clear what to click on... and the universe throws it back in my face and just creates an even bigger idiot.
oh well, no hard feelings, good to hear you figured it out.
Olipro said:
I grey out the options to make it clear what to click on... and the universe throws it back in my face and just creates an even bigger idiot.
oh well, no hard feelings, good to hear you figured it out.
Click to expand...
Click to collapse
I prefer my analogy...........lemmings is a good game but you can only save so many until you have to nuke the rest!!!!
haha.. well all is good.. and thanks I guess it was just my fault in not being smart enough to figure that one out...( radio just flashed and now onto WM6)
a7xsoad said:
haha.. well all is good.. and thanks I guess it was just my fault in not being smart enough to figure that one out...( radio just flashed and now onto WM6)
Click to expand...
Click to collapse
good stuff....what flavour of WM6 and which radio??
Newest Radio 138.00.10.. and of course I had to go with Black 2.0... Just the issue on roaming right now... came across it on here before, so i'll figure it out...
Okay.. well now I that it's all flashed i connected to the internet, but i can't send MMS. I tried putting back the factory settings listed here
https://www.cingular.com/support/setupOTW.do
but Black 2.0 doesn't seem to have a media net button and it won't send any mms.. any suggestions. I think I might have to downgrade back to WM5 get used to it and then possible come back to WM6... thanks.
a7xsoad said:
Okay.. well now I that it's all flashed i connected to the internet, but i can't send MMS. I tried putting back the factory settings listed here
https://www.cingular.com/support/setupOTW.do
but Black 2.0 doesn't seem to have a media net button and it won't send any mms.. any suggestions. I think I might have to downgrade back to WM5 get used to it and then possible come back to WM6... thanks.
Click to expand...
Click to collapse
Forget the settings on cingulars website, they assume you are running a cingular rom.
Search the wiki page and there will be a .cab file to install the settings.
Either that or enter them manually. There are plenty of users running Black 2.0 on cingular
I have been wanting to unlock/upgrade my 8125(G3) for awhile finally I got the time to try (just in case something went wrong). After reading previous posts everything went well. I am now running WM5 w/Touch Flo many thanks to the dev.
The 8525 I am working on now this i have a few questions on:
1.) The screen flashes to fast on reboot to see what the SPL/IPL is so do I
assume this is a G4? If not how do I find this info?
2.) Just for educational sake I attempted to use sSPL that was supplied w/
the WM5 (touchflo) rom (G4 Safe) on the 8525; The instructions say
sometimes it doesnt go to white screen so you can begin flashing just
close everything out and try again; I tried around 10 or so times...
3.) Some of the post in these forums are just amazing props goes out to
this whole community; however most if not all use terms that I can only
guess at by the sentence the are in so if anyone could help out it would
be great.
I get the concept of flashing the G4 with tricking the phone into thinking its CID unlocked and all i think i'm just missing something... any help would be appreiciated TIA
If I am not mistaken you better have a look here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
The Hermes-forum would be more appropriate for your questions ...
Thanks for the reply, what was throwing me off was the fact that under "Hermes" the '8525' is not listed w/ the other phones. I figured this would be one of the more popular phones since it is the 8125 replacement @ our At&t store.
After posting the first post I did some reading and I think I've got everything I need. The HardSPL seems to be the way to go, and the software that does a check to make sure its a G4 before proceeding is awesome! Thanks for the help, thanks to all the developers here in this forum as well.
Hey there, I've been anxious to flash my xv6800. I've been reading and searching extensively in the forums and FAQs and the Wiki (I don't usually post until my frustration is out of control). I've found some useful info here:
How-to for Wizard
http://forum.xda-developers.com/showthread.php?t=298613
but didn't see the G3/G4 designation on my splash screen (dead end)
How do I go about flashing to a DCD rom (or any custom rom for that matter)? Is there software I need to install on my comp and are there any steps specific to the xv6800 verizon firmware?
I would really appreciate any help. Thanks
I'm in a similar situation to you. I found this helpful guide the wiki here and it got me started. I also posted a similar plea on the DCD's Titan Rom thread so see if a response turns up there. Good luck and PM me if you find anything helpful. The title of your thread makes it a good place to post for the likes of us.
edit: I bet if this was made a sticky and some informed people posted some helpful info, us noobs would stay out of other threads asking for answers. (sound of kitten stuck in tree)
i need help too
well i got impatient and just downloaded dcd 1.6.10 and just clicked on the .exe without doing anything else. its currently doing its thing, hope it works!
You so crazy! I hope that works, but I have my doubts. The version you're referring to, 1.6.10, is for DCD's Titan kitchen. AFAIK, the kitchen's for cooking your own rom. Cooking is different from flashing as far as I can tell. I think you'll now find that you're ready to make your own rom on your PC, but that still leaves us unsure of how to prepare for and execute the actual rom replacement on the Titan. Right, wrong, Bueller?
it didnt work. it was stuck at 0% forever and then gave an error. i took the battery out and back in and am back to how i was before. no brick
i think i need some sort of bootloader. "re-locker" ? i cant find this when searching.
i thought dcd 1.6.10 is a rom for everyone, and kitchen is for those who want to make their own roms? im so confused.
http://forum.ppcgeeks.com/showthread.php?t=9927
excellent. Thanks!
fusQer said:
it didnt work. it was stuck at 0% forever and then gave an error. i took the battery out and back in and am back to how i was before. no brick
i think i need some sort of bootloader. "re-locker" ? i cant find this when searching.
i thought dcd 1.6.10 is a rom for everyone, and kitchen is for those who want to make their own roms? im so confused.
Click to expand...
Click to collapse
I tried to load dcd's and the official rom and the same thing happens to me, stuck at 0% then connection error.
Been trying to get some info from ppcgeeks.com but the forum has been down since yesterday.
What are we doing wrong?
Throw you a bone
OK, you guys sound real clueless (actually only a little more clueless than me!) so I'll help out. The ROM by itself is all ready to flash to your phone, like reinstalling a new operating system on your PC. The kitchen can be used to customize your own ROM, but I'd suggest you guys read up a bit more before going here. The garden variety ROMs that DCD and others provide is fine for now.
There are utilities on this forum to get you out of the bootloader screen if you get stuck (heppened to me last night). Search around a bit, and certainly read up a bit before flashing. These things are real complicated, but it takes a bit of understanding because the steps MUST be done in the right order, and many impatient folks dive in and get screwed, then complaign to the folks who gave them the files to begin with!
jorge_culv
Maybe ur misunderstanding what's happening.
Whenever I try to flash the device Windows Mobile Device Center closes both the screen on my Mogul and the window on the host pc never moves from 0%
Hope that helps
OK - I'm new to this also but have a question. I know data is lost so does that mean I need to re-establish all my email accounts and contact lists? I installed the cab to allow you-tube and bluetooth data to my tomtom. Also the Touch commander. Is all that gone and I have to redo that as well? Is there a suggested utility to back up as much as possible to restore? I sync with my company email via exchage. Right now everything is basically working fine so hate to take a chance.
Regards... Steve
Before I flash my phone for the very first time, I need to know some things.
I know there are threads who give info, but they aren't always up-to-date or handeling about my phone.
So I want to know, I heard about a third version of HSPL.
What are the things that I need to do?
If I want to install a new rom, I first install HSPL, then the rom, but do I have to install something like a radio too? or something else?
Will a custom rom always work in my language (BE/DUTCH),
and which rom is good for texting (no lag etc).
I want a clean and smooth rom, with not much BS. Any advice?
I know it's a lot of questions, but I'm stuck with them for a long long time and I want to be well prepared.
Version of OS: 5.2.21869
Manila: 2.5.19211619.0
ROM: 1.66.404.1 (76641) NLD
RADIO: 2.06.51.07
Follow this thread step by step and you cant go wrong.
Its link you to HSPL3 and anything else you might need.
It tells you how to flash a radio (if you need to).....
It will tell you which radio you need in the thread for the rom your going to use....
You just have to read through all the rom threads to find out which one is going to be best for you...... I'd reccomend energy roms... I think they might only be available in english though. Different languages available will be listed in the rom thread...
The flash only takes 10 minutes...its the reading up first thats the time consuming part....
Hope it all goes well for you
thanks for the advice, I will follow it and read everything 10 times before flashing anything
HectiQ said:
thanks for the advice, I will follow it and read everything 10 times before flashing anything
Click to expand...
Click to collapse
Yea. Read it very very very carefully. Once you grasp the process, it's so easy and intuitive.
HectiQ said:
i will follow it and read everything 10 times before flashing anything
Click to expand...
Click to collapse
blimey, you can come again! hehe
So here are the steps that I'm about to take: (first off I saved all my data, sms, etc elsewhere).
1) flash HSPL 3
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
thread HSPL3 said:
Seems all ROMs based on 1.42, 1.66, 1.XX can work with 2.08 SPL without problems.*
Click to expand...
Click to collapse
My ROM is 1.66.404.1 (76641) NLD, so it seems that this is okay to do. I think I have the 'usualleo', can I check this somewhere?
When I look into RAM SIZE, it says 512 MB, and I don't know what telstra is, but I definitly won't need the last one (1024). I also think in HSPL itself, I need to choose 2.08.HSPL.
Next, I'm about to flash my first custom rom, and will follow the steps given here:
Flashing Via ActiveSync
1. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your computer
2. REMOVE SIM and microSD CARDS!! (this is a precautionary measure and is not compulsory)
3. Turn phone back on and wait until it syncs with your PC
4a. If your Rom is a .exe (customRUU.exe is already included in the Rom file) then run the file
4b. If your Rom is a .nbh file then run the CustomRUU.exe from the Roms Folder (if one isnt included then download it *HERE*)
5. Follow onscreen instructions to set up your New Rom
6. Once phone has gone through the customisation procedure then replace Sim and microSD Cards
7. Perform a Hard Reset to clear any leftover data from your previous Rom (see intructions at bottom).
8. Set up phone as required and job done.
Click to expand...
Click to collapse
I really can't find what ROM I should use..
I want a rom with landscape built in and the sms client 2016.
Are there much roms which include this?
yea thats all OK, except you dont really need to remove sim and sd. Only if you're stroubleshooting.
Plus, most cooked roms support 'autoinstall', , , create a folder on your sd card called autoinstall, put in there any cabs that are essentials, and the rom will install them as part of the post flash setup process.
as to which rom for what, thats gotta be down to you. Theyre all good, theres no such thing as a best rom, and what works brilliantly for one person makes the next person weep with frustration.
Flashing only takes 5/10 mins, you can try out a dozen roms in an evening.
Dont forget you only need apply hspl once. It will stay there till you either flash a stock from sd card (dont do this, theres no need nowadays) or you can run hspl2 (yes, hspl2) and choose your stock spl (1.42.0000 or 1.66.0000 or whatever)
can I run HSPL 2 after I firstly installed HSPL 3 for the custom rom I'm about to choose? And I'm guessing roms come packed (7z/zip/rar), need to unpack those files I guess? How do you actually start cooking a rom?
edit: I also gonna remove everything (hard reset) before I start flashing anything, so I start clean
Okay this is coming really close now:
http://forum.xda-developers.com/showthread.php?t=612580
Download Artemis 23.0 level A NLD (this I'm about to use)
I'm gonna go with artemis, but I also want a higher radio version. should I update my radio or my rom first? And how do I know which radio is compactible with that rom? the ones adviced in the rom? http://www.pilotlogic.com/artemis/htc_hd2_radio/ these?
I'm a bit confused what steps to take, in which order.
I know I have to HSPL first, (gonna use HSPL 3)
but then I doubt which to do first, rom or radio. And is it easy to install? Can I make any mistakes on this? what are the things that need special attention? thanks in advance guys, for all the help!
doesn't matter which order, except if you do rom first your phone will hang till you enter bootloader and flash a matching radio so most people say radio first.
heres how i'd do it
1 hspl3 (only needs doing once, not every time you flash)
2 enter bootloader manually
3 flash the radio
4 when it gets to 100% and is about to reboot, hold down voldown to go back into bootloader
5 flash the rom
6 allow phone to boot properly
samsamuel said:
doesn't matter which order, except if you do rom first your phone will hang till you enter bootloader and flash a matching radio so most people say radio first.
heres how i'd do it
1 hspl3 (only needs doing once, not every time you flash)
2 enter bootloader manually
3 flash the radio
4 when it gets to 100% hold down voldown to go back into bootloader
5 flash the rom
6 allow phone to boot properly
Click to expand...
Click to collapse
SUPERB!! Thank you for the clear advice! Will try this step by step tonight. Thanks samsamuel I really like xda everybody is helping out :d
I used the video guides the first time..........
Id have freaked out about the radio hanging at 96% if I hadnt already seen that on the video.
Watch each step before you do it, that way you know what to expect.....
Happy flashing.........
conantroutman said:
I used the video guides the first time..........
Id have freaked out about the radio hanging at 96% if I hadnt already seen that on the video.
Watch each step before you do it, that way you know what to expect.....
Happy flashing.........
Click to expand...
Click to collapse
oh indeed! I'ld freak out too! haha. Gonna check it out. Thanks conantroutman!
I hope the artemis rom (Artemis 23.0 level A NLD)
is compactible with this radio version: 2.10.50.28_2
Maybe anyone knows? if not I might ask it in the Artemis thread
think I'm good to go then, well prepared, thanks to you guys
update, just installed HSPL going slowly to the next step
damn guys? I'm really DOUBTING, should I flash a rom or a radio first?
I'm scared if I flash my rom first my cell won't startup because of incompactibility with my phone's rom? Or reversed ways. Can anyone advise me before I start?
Edit: took a leap of faith and trusted on the posts above, and I'm now running a new radio now only my rom and I'm done. Gonna see the video's and tuts first. I'll keep you updated. WOOOOOOOOOOOOOOW this radio is GREAT! my sound quality has improved like A LOT! very strange, with my original rom, I always heard noises, now it's way clearer when I call
hey man, nearly there.....
once your done you'll wonder what all the fuss was about....
only problem is...... you'll be hooked and looking for something else to flash...
glad its all going well.....
conantroutman said:
hey man, nearly there.....
once your done you'll wonder what all the fuss was about....
only problem is...... you'll be hooked and looking for something else to flash...
glad its all going well.....
Click to expand...
Click to collapse
yes, and it's all thanks to you guys here at xda, I even got to try android wow. But I'm gonna stick to mobile shell for a while, combine it with a new rom I'm about to select
Hello,
i just want to ask if maybe one of the admins could contact the developers of HSPL, because there are many who bricked their devices because of SPL 3.03. Or maybe one of the developers themselves will read this. HSPL is the last way out in most cases (or finding somebody with a ORT JTAG Tool).
I know that you better should not update a device without collecting information before it. Indeed!
My last phone was a iPhone, so I know what I´m talking ´bout, but sometimes it just happens that you might have skipped any important information or hint.
So please help :/
You bricked your device? wow!
May be you are just stick on the boot screen where it says SPL 3.03, because you tryed to flash a ROM from the SD card that is not for your operator?
Well, if this is the case just flash an older official ROM for your operator, again from the SD card. Than you can use the actual HSPL and flash a custom ROM. That fixed it for me.
idimdim said:
You bricked your device? wow!
May be you are just stick on the boot screen where it says SPL 3.03, because you tryed to flash a ROM from the SD card that is not for your operator?
Well, if this is the case just flash an older official ROM for your operator, again from the SD card. Than you can use the actual HSPL and flash a custom ROM. That fixed it for me.
Click to expand...
Click to collapse
of course i already tried that, does not work.
You are not clear.
Can you get your device to boot loader?
If yes, then you can try Gold card method from there.
yes that still works, but i tried goldcard method today (1 time with the rom which bricked my device und with a custom rom and the original orange rom [my hd2 has a orange branding]) and it was not the solution for my problem :/
edit: oh and if it´s of interest: when trying to flash with goldcard method the rom which bricked it, i get the white screen with "Loading..." in the middle and then it says "Not allow" also on a white screen and "0028002" written in red, then gets back to bootscreen.
well since u can get to ur bootloader consider urself lucky it aint bricked..
Do one thing, get the newest stock rom from htc (same spl 3.03) and make sure its the right one for your device(when you enter your serial no. it should accept and give u a download link).
then try flashing that rom..
It should get you up and running.
After that you can start worrying about getting back to the old spl and/or hardspl
New HSPL
I am stuck with the same thing.
If i could only geat a new HSPL for spl 3.03.0000
[email protected] said:
I am stuck with the same thing.
If i could only geat a new HSPL for spl 3.03.0000
Click to expand...
Click to collapse
Try flashing an older stock Rom one that is covered by hspl via SD card method. Then whenever you like to install that latest 3. 14 Rom do it via usb method.
jjblaster3 said:
Do one thing, get the newest stock rom from htc (same spl 3.03) and make sure its the right one for your device(when you enter your serial no. it should accept and give u a download link).
then try flashing that rom..
Click to expand...
Click to collapse
that´s exactly where my problem is...
my HD2 has a orange branding and is from france. i downloaded a rom from a link somewhere in xda threads, but it´s a really old rom version. the idiots of orange support posted me a link to the touch hd rom^^, so i even don´t know if there is a rom out there.
dunno if it would help posting my serial here...
i tried to decrypt it for finding information about my model, but the only information i can get is the day of production by the first few numbers and letters :/
OlDirty89 said:
that´s exactly where my problem is...
my HD2 has a orange branding and is from france. i downloaded a rom from a link somewhere in xda threads, but it´s a really old rom version. the idiots of orange support posted me a link to the touch hd rom^^, so i even don´t know if there is a rom out there.
dunno if it would help posting my serial here...
i tried to decrypt it for finding information about my model, but the only information i can get is the day of production by the first few numbers and letters :/
Click to expand...
Click to collapse
You might want to look into the download.. if it's an MFG SPL you're stuck with it
Can you provide the link please?
So from what I understand, OlDirty89 failed to read the fine print and is now in possession of an un-usable phone.
I remember when XDA was actually a community where users like this could actually get help when faced with a situation like this...
EX> I was a noob once. My first PPC was a WM5 HTC Wizard/aka/T-Mobile MDA. I actually stumbled across this forum by accident looking for cool new apps for my phone since lets face it.. WM5 is very bland. I saw what I thought was the coolest thing I'd ever seen - a complete OS replacement loaded with new features I'd never seen on a phone before and sure enough, without reading, I downloaded and attempted to flash the ROM. Naturally, it failed and I panicked. I had paid just over $300 for the phone after all.. I came back to this site, opened a new thread titled "PLEASE HELP ME!!" and within an hour, the more seasoned users on this site helped me restore my phone to the factory state and guided me in the right direction, teaching me everything I could have ever wanted to know about WM and how to customize it. I did eventually get that cool custom ROM on my Wizard and became an established member of the community.
^^^^ This is why I absolutely CANNOT STAND flamers... Flaming a user for being less knowledgeable than you is just plain pathetic... Shows what you're like on the other end of the keyboard too... You know it was really funny because I stumbled across a statistic once that stated that 60% of users who join these forums and flame other users are overweight virgins living with their parents... Just thought that was a funny statistic worth mentioning...
Now with all of that being said.. Let's help this guy. He clearly needs it else he wouldn't have posted this thread asking for it. I'm not saying that someone should write a step-by-step tutorial right here in this thread telling him exactly how to undo what he's done, just guide him in the right direction...
This speech really reminds me of a movie I saw not too long ago...
"Pay it forward..."
Just my 2 cents...
dharvey4651 said:
So from what I understand, OlDirty89 failed to read the fine print and is now in possession of an un-usable phone.
I remember when XDA was actually a community where users like this could actually get help when faced with a situation like this...
EX> I was a noob once. My first PPC was a WM5 HTC Wizard/aka/T-Mobile MDA. I actually stumbled across this forum by accident looking for cool new apps for my phone since lets face it.. WM5 is very bland. I saw what I thought was the coolest thing I'd ever seen - a complete OS replacement loaded with new features I'd never seen on a phone before and sure enough, without reading, I downloaded and attempted to flash the ROM. Naturally, it failed and I panicked. I had paid just over $300 for the phone after all.. I came back to this site, opened a new thread titled "PLEASE HELP ME!!" and within an hour, the more seasoned users on this site helped me restore my phone to the factory state and guided me in the right direction, teaching me everything I could have ever wanted to know about WM and how to customize it. I did eventually get that cool custom ROM on my Wizard and became an established member of the community.
^^^^ This is why I absolutely CANNOT STAND flamers... Flaming a user for being less knowledgeable than you is just plain pathetic... Shows what you're like on the other end of the keyboard too... You know it was really funny because I stumbled across a statistic once that stated that 60% of users who join these forums and flame other users are overweight virgins living with their parents... Just thought that was a funny statistic worth mentioning...
Now with all of that being said.. Let's help this guy. He clearly needs it else he wouldn't have posted this thread asking for it. I'm not saying that someone should write a step-by-step tutorial right here in this thread telling him exactly how to undo what he's done, just guide him in the right direction...
This speech really reminds me of a movie I saw not too long ago...
"Pay it forward..."
Just my 2 cents...
Click to expand...
Click to collapse
Great post
But I hate to say, unless we can get some powerful brainstorming goin on and figure out how to drop an engineering SPL (MFG) with mtty I don't think we can help..
I started a thread a little while back -- Stuck with SPL 2.02.0000 - Test ROM? that you might wanna read through to understand your situation a little better.
And just fyi, you can play/flash between 2.02 and 2.03 without problems, just DON'T try flashing 2.01 from those two.. left me with a lovely little brick.
(this is only if you flashed the 2.03 from this thread)
OlDirty89 said:
that´s exactly where my problem is...
my HD2 has a orange branding and is from france. i downloaded a rom from a link somewhere in xda threads, but it´s a really old rom version. the idiots of orange support posted me a link to the touch hd rom^^, so i even don´t know if there is a rom out there.
dunno if it would help posting my serial here...
i tried to decrypt it for finding information about my model, but the only information i can get is the day of production by the first few numbers and letters :/
Click to expand...
Click to collapse
Use SSPL and it will install your Custom or Stock ROM without any problem.
Download from here http://forum.xda-developers.com/attachment.php?attachmentid=260802&d=1261873816
OlDirty89 said:
of course i already tried that, does not work.
Click to expand...
Click to collapse
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Scabes24 said:
You might want to look into the download.. if it's an MFG SPL you're stuck with it
Can you provide the link please?
Click to expand...
Click to collapse
http://www.megaupload.com/?d=BC4FGYH4
it´s 1.43
dharvey4651 said:
So from what I understand, OlDirty89 failed to read the fine print and is now in possession of an un-usable phone.
I remember when XDA was actually a community where users like this could actually get help when faced with a situation like this...
EX> I was a noob once. My first PPC was a WM5 HTC Wizard/aka/T-Mobile MDA. I actually stumbled across this forum by accident looking for cool new apps for my phone since lets face it.. WM5 is very bland. I saw what I thought was the coolest thing I'd ever seen - a complete OS replacement loaded with new features I'd never seen on a phone before and sure enough, without reading, I downloaded and attempted to flash the ROM. Naturally, it failed and I panicked. I had paid just over $300 for the phone after all.. I came back to this site, opened a new thread titled "PLEASE HELP ME!!" and within an hour, the more seasoned users on this site helped me restore my phone to the factory state and guided me in the right direction, teaching me everything I could have ever wanted to know about WM and how to customize it. I did eventually get that cool custom ROM on my Wizard and became an established member of the community.
^^^^ This is why I absolutely CANNOT STAND flamers... Flaming a user for being less knowledgeable than you is just plain pathetic... Shows what you're like on the other end of the keyboard too... You know it was really funny because I stumbled across a statistic once that stated that 60% of users who join these forums and flame other users are overweight virgins living with their parents... Just thought that was a funny statistic worth mentioning...
Now with all of that being said.. Let's help this guy. He clearly needs it else he wouldn't have posted this thread asking for it. I'm not saying that someone should write a step-by-step tutorial right here in this thread telling him exactly how to undo what he's done, just guide him in the right direction...
This speech really reminds me of a movie I saw not too long ago...
"Pay it forward..."
Just my 2 cents...
Click to expand...
Click to collapse
thanks for that. we could not be a specialist in everything
netvpn7 said:
Use SSPL and it will install your Custom or Stock ROM without any problem.
Download from here http://forum.xda-developers.com/attachment.php?attachmentid=260802&d=1261873816
Click to expand...
Click to collapse
SSPL does not work on my device at the moment.
idimdim said:
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Click to expand...
Click to collapse
i´m trying that right now (download is active)
idimdim said:
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Click to expand...
Click to collapse
Downloading ...
looks like I am also stuck on bootloader with SPl 3.03,nothing I did helped so far,I had HSPL3,my stock Rom was 166.707.
any help is greatly appreciated.
OlDirty89 said:
Hello,
i just want to ask if maybe one of the admins could contact the developers of HSPL, because there are many who bricked their devices because of SPL 3.03. Or maybe one of the developers themselves will read this. HSPL is the last way out in most cases (or finding somebody with a ORT JTAG Tool).
I know that you better should not update a device without collecting information before it. Indeed!
My last phone was a iPhone, so I know what I´m talking ´bout, but sometimes it just happens that you might have skipped any important information or hint.
So please help :/
Click to expand...
Click to collapse
I experienced same things after return my phone for screen problem. Orange france gave me a new one and then my problem began. I made all the needed steps to flash a new radio and Artemis ROM and my phone became crazy. Radio failed at 99%, random soft reset etc... By chance there is a new version (1.72) on the website of orange. With HSPL2 i managed to downgrade the SPL to 1.66 version and flash with the last official orange ROM.
Frequently, my phone continue to soft reset itself and became crazy. Can't use it on a whole day, without soft reset 10 times. I decided to return it to Orange (SPL, ROM and Radio where the good ones). Received a new one, immediatly flash my phone with artemis V36 and radio 2.10.50_28 and all is ok with this last phone.
Probably problems come from the phone and not the way you try to revert back...
idimdim said:
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Click to expand...
Click to collapse
omg....great. it worked! i love u guys
i knew i will get help here
jovanoti
Hi, I've got the same problem with my Orange HD2.
I can not find any original older ROM to flash with HSPL.
No any chance to install any different rom than my "French language" ROM which is my exact problem I wanna WWE.