[Q] igo8 HTC HD2 fatal error - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting
Hi
I am new in this site and and hope you excuse my very poor english...
But i have a probleme and i hope to solve it here with some help...
I explain my probleme:
i heve a HTC HD2 and IGO8 3-4-117940 version with a skin choup on my SD card;
It work very well ...for about 10 minutes then i have the following error message:
fatal error occured in mean thread
Exception: 0xc0000005
At address: 0x0016020c
Access violation reading address: 0x10000000
0x0016020c
WinCE CallStack snapshot (function names unknown - map file \Carte de stockage\Igo8\iGO8.map not found):
and igo crash...
so i can use it again for a few minutes but it crash again...
her my sys.txt:
[debug]
skip_eula=1
[device]
Type="ALIAS_TOUCH HD"
sdcard_dsk_num=7
[folders]
install_path="\Carte de stockage\iGO8"
mortscript="\Carte de stockage\Program Files\MortScript\MortScript.exe"
[interface]
skin="ui_igo8_da"
vga=1
maxzoom2d=6000000
show_exit=1
Skip_contact_import=1
screen_x=480
screen_y=800
[map]
rasterorder=""
viewpreset_front1="30,100,7200,10"
viewpreset_front2="70,7000,6000,10"
viewpreset_top="600,50000,225,10"
viewpreset_front3="70,7000,6000,10"
map_mode="3D"
follow_gps="1"
rotation="1775"
popup_info="1"
3d_buildings_distance="1"
3d_dem_detail="3"
[navigation]
autoreplan_action="AUTO"
[power]
powermgm_state="0"
backlight_night="78"
backlight_day="100"
[rawdisplay]
screen_x=480
screen_y=800
autoconfig=1
highres=1
class="portrait"
driver=GDI
[route]
correctness="88"
route_type="SHORT"
allow_toll="1"
[settings]
accident_recalc="0"
closed_recalc="0"
heavy_recalc="0"
congestion_recalc="0"
roadworks_recalc="0"
closures_recalc="0"
danger_recalc="0"
weather_recalc="0"
police_recalc="0"
invalid_recalc="0"
[warning]
speedcam_warning="1"
speedcam_soundtype="0"
speedlimit_warning="0"
speedwarn_tolerance="-1"
speedwarn_toltype="1"
speedwarn_alt_tolerance="-1"
speedwarn_alt_toltype="1"
[warning.driveralert.settings]
preshow_distance_cat0="500"
preshow_distance_cat1="500"
preshow_distance_cat2="500"
[switchmap]
changer="\Carte de stockage\iGO8\Extension\MapChanger\MapChanger.exe"
1=",map_ta,\Carte de stockage\iGO8,\Carte de stockage\iGO8"
2=",map_nt,\Carte de stockage\iGO8,\Carte de stockage\iGO8"
3=",map_ot,\Carte de stockage\iGO8,\Carte de stockage\iGO8"
4=",map_us,\Carte de stockage\iGO8,\Carte de stockage\iGO8"
[scheme]
disable_themechanger=1
If somebody could help me it will be great...
Hello,
did you ever try
\Storage Card\Programm Files\IGO8\content\map\.....fbl\
as storage path for the IGO Map files.
(must not be "Programm Files" you can use each other folder for it.)
I have this problem a few month ago and all what happend in my case was that the maps are not in correct folders, IGO is finding the map but after a while something went wrong and IGO crash.
Hopefully i can help you.
gr33tz
hello....and thank's for your reply...
I have create a igo8.map folder in igo8 folder...
\Carte de stockage\Igo8\iGO8.map (and i put the map.fbl in it)
but a already have the same error message...
should i do something else....??? change my sys.txt...? or create another map folder in a other place ?
Hi try reinstall you IGO but when you make new installation make sure you install program on main memory and you maps on SD Card. Good luck
Hi
I don't need to install igo8 on my phone...all the folder is on my SD card...
I just start the igo.exe and igo stard well...
Some friends have se same phone and the same igo8 version and they have no problem...!!!
krazy1 said:
Hi
I don't need to install igo8 on my phone...all the folder is on my SD card...
I just start the igo.exe and igo stard well...
Some friends have se same phone and the same igo8 version and they have no problem...!!!
Click to expand...
Click to collapse
Ask your friends to give you their data.zip and sys.txt than try it again.
Yes i will try that...thank's
krazy
i have a problem with IGO8 on my HD2. it say's that the device doesn't have tmc software and no gps module. what should i do?
cipriann1984 said:
i have a problem with IGO8 on my HD2. it say's that the device doesn't have tmc software and no gps module. what should i do?
Click to expand...
Click to collapse
get a proper sys.txt for hd2. just google it, or search here on xda.
Related
TomTom5 and Wm2005
Hi all After finaly getting tomtom version 5 installed I run into the dreaded no backlight Can any one help here please, I have tried the following so people know, thanks to all who help I have changed the reg entries manual to 300 and 600 for HKCU\ControlPanel\Backlight\ACTimeout HKCU\ControlPanel\Backlight\BatteryTimeout Have tried messing with the backlight settings in the control control, no good I have tried the tomtom backlight fix, installed the dll, run the setup, says copied shortcut, the shortcut is there with no icon, when i run it, nothing happens Does any one else have any more ideas otherwise i will have to reflash my xda2 back to 2003 Sad thanks to all who shed any light on this Rik.
my backlight is fine wiv mine while using tomtom but it just leaves the blacklight and screen setting to neva timeout when i close it
Can i ask what settings you are using and how did you install it thanks
final solution to tomtom5 backlight problem Hello, I was sick of using the regeditor to fix the messed up backlight settings everytime I started TomTom5, so I looked for a better solution. I figured it would be the best if TomTom wouldnt mess with the settings at all, so I changed the binary. it is not very hard to do. copy the TomTom Navigator.exe to you windows pc. grab a hex editor and change the following 0x182b9c 0x61 -> 0x62 0x182c0c 0x61 -> 0x62 0x182c3c 0x61 -> 0x62 0x182ca0 0x61 -> 0x62 what this does is change all the Registry Paths ControlPanel\Backlight to ControlPanel\Bbcklight as the result, TomTom will not be able to modify the settings at all. everything will stay with your default values. have fun
thanks man, that actually worked ! :lol:
wow Great works a treat.. Just search for backlight and change it with a hex editor... Fantastic... Thanks
Re: final solution to tomtom5 backlight problem This is right: 0x182bC9 0x61 -> 0x62 0x182c0c 0x61 -> 0x62 0x182c3c 0x61 -> 0x62 0x182ca0 0x61 -> 0x62
Re: final solution to tomtom5 backlight problem EelcoV said: This is right: 0x182bC9 0x61 -> 0x62 0x182c0c 0x61 -> 0x62 0x182c3c 0x61 -> 0x62 0x182ca0 0x61 -> 0x62 Click to expand... Click to collapse I used a "HHD Software Free Hex Editor" but can’t find this numbers to edit This newbie (no program experience) need some help...pleazzzz
in my case 0x182bc9 value is 00 and 0x182b9c is 69. How can this be ? I changed both of them to 61 (in 2 different files, mind you) and they both work, allthough the latter crashed a few times.
@ postman : I used xvi32 from this site, no programming experience either. I just opened navigator.exe, went to the mentioned addresses and changed the numbers. Seems to work..........
thanks pleun, i will try and let you know. other question: i see that u use the 1.60 and i use the 1.50i(64) i did that just for more space wat works best with tomtom5? the 150 or the 160?
don't know, never used 1.50. I got plenty space on the SD card
thanx for the tip works great !
I downloaded the XVI32, opened the tomtom navigator.exe And search for the mention files, but no result, can’t find anything See attachment
use address and goto, not search
Thanks pleun, I edit the 4 items and change them to 62 0x182bc9 0x182c0c 0x182c3c 0x182ca0 But the tomtomt will NOT start ...did I forget something?
I assume you saved the file after you edited it and copied it back to the correct location on the pda ?
yes, edit the 4 files and saved it to the exact same name as bevore and reload the exe to the same place on the mda2 i edit only the 0x182bc9 and not the ...9C is that the problem?
well try to leave c9 as it is and edit 9c. Both of them work on my MDA but you never know. You can also email me the .exe and I'll try it on my device.
:lol: :lol: :lol: :lol: :lol: thanks pleun (and all who helps) IT WORKS!!! 2 Questions left 1) is it also posible to create a shot cut to "today" i have to browse to the program files 2) i have copy the data05.chk, data14 and data16.vif, but no dutch (bart) voice any advice?
Backup Original ROM before trash my Himalaya
First of all .. my thanks goes to all the people to this forum! You're really GREAT !! In any case sorry for my poor english :wink: I've few questions ... I've read many many pages but I can't understand the right procedure to follow for dumping my Himalaya original ROMs because in some pages the "d2s" command is followed by some numbers and in other, by other numbers ... confusion bring me ! After that, otherwise, I've tried to follow the XDA II procedure and the storing procedure to SD seems to be ok .. but when I try to save the rom dump from my SD to PC using ntwr (otherwise was unreadable in Win), I've got a read error but, in any case, I obtain only one file on my PC of about 400 MB and I suppose that something is wrong because all of you speaks of about 50 MB ... so ... What's the right procedure with the right command? How can I be sure that my dump is correct? The dump it's only one file or one for separate ROM Radio and Extended? When I solve this issue I can try to upgrade my Himalaya to WM2005. Thank you for your help.
Please help me, I'd like don't lose my guarantee.
This post was submitted also to buzz forum Now this is the situation ... Qtek 2020 - 1.66.04ITA -= Preparing the device =- 01 ) I,m gone to Bootloader (Power + Directions + Reset) 02 ) I see on the device "Serial v1.06" 03 ) I stop MSSync service Ctrl+Alt+Canc and stop wcescomm.exe 04 ) Put device on cradle 05 ) Now I see on the device "USB v1.06" instead of "Serial v1.06" 06 ) Put the 512 MB SD into the device 07 ) Start Mtty 1.42 08 ) Leave as is all the parameters 09 ) I've "USB" port (and not ".WCEUSBSH001") and I press USB 10 ) Ok seems to be connected to the device -= Dumping the ROM on SD =- 11 ) Into mtty command line I write (and not copy and paste and without "sd a" at the end) d2s 80000000 02000000 12 ) Device tell me % of work while in mtty I found SD:Waiting for card insert......... CMD3 for SD, it's OK, ready to get RCA from response. SD : Detected one card SD : ready for transfer OK pc->drive.total_lba=EEC00 pc->drive.num_heads=0 pc->drive.sec_p_track=0 pc->drive.num_cylinders=0 pc->drive.block_size=200 pc->drive.features=0 pc->drive.RCA=B368 pc->drive.drv_type=40000000 pc->drive.securedAreaSize=0 pc->drive.securityDrv=0 pc->drive.busWidth=1 pc->drive.erasedSize=0 Total card size=1DD80000 SDCARDD2S+,cStoragePlatformTyp e=FF ****************************** ****************************** ****************************** ****************************** ******** Store image to SD/MMC card successful. USB> 13 ) Then I write d2s 60000000 00300000 sd a 14 ) Device tell me % of work while in mtty I found SD:Waiting for card insert......... CMD3 for SD, it's OK, ready to get RCA from response. SD : Detected one card SD : ready for transfer OK pc->drive.total_lba=EEC00 pc->drive.num_heads=0 pc->drive.sec_p_track=0 pc->drive.num_cylinders=0 pc->drive.block_size=200 pc->drive.features=0 pc->drive.RCA=B368 pc->drive.drv_type=40000000 pc->drive.securedAreaSize=0 pc->drive.securityDrv=0 pc->drive.busWidth=1 pc->drive.erasedSize=0 Total card size=1DD80000 ************ Store image to SD/MMC card successful. USB> 15 ) Then I write d2s 70000000 01080000 sd a 16 ) Device tell me % of work while in mtty I found SD:Waiting for card insert......... CMD3 for SD, it's OK, ready to get RCA from response. SD : Detected one card SD : ready for transfer OK pc->drive.total_lba=EEC00 pc->drive.num_heads=0 pc->drive.sec_p_track=0 pc->drive.num_cylinders=0 pc->drive.block_size=200 pc->drive.features=0 pc->drive.RCA=B368 pc->drive.drv_type=40000000 pc->drive.securedAreaSize=0 pc->drive.securityDrv=0 pc->drive.busWidth=1 pc->drive.erasedSize=0 Total card size=1DD80000 DOCInfoTableinitHW+ Binary0:dwSize=80000 BINFS0:dwSize=0 FAT0:dwSize=1000000 FAT1:dwSize=EA0000 All:dwSize=1F20000 ****************************** ****************************** ****** Store image to SD/MMC card successful. USB> -= Saving ROM from SD Card to PC =- 17 ) Put the SD Card into a Card Reader 18 ) Go to Dos command line into ntrw path 19 ) Type "ntrw read ROM.nb1 H:" where H: is the Card reader drive Now start the problem ... :shock: I want to know if it's all ok with this process ... The output of ntrw is: NTRW 2.0 Removable media Cylinders: 0:60 TracksperCylinder: 255 SectorsPerTrack: 63 BytePerSectors: 512 bufsize is 65536 500629504 bytes written bytes: 0 ReadFile(): ROM.nb1 -- Parametro non corretto First signal of some error but someone tell that's ok! And then I see prompt. Now I find the file ROM.nb1 that is 477 MB (like the SD size after a FAT format). It's ok? ... I don't think so .. but let's going on! I open the file with an HEX Editor and the file seems ok but after a string like HTCE the file contains all 00h. Can I cut off that part? How can I ensure myself that's all ok? Come on guru don't leave me with the bootloader splash screen instead of the MAGNETO one :lol: :lol: :lol:
Thanks to rhmartin's help (on buzzdev.net) I've reach this situation .. I've got my dumped rom in SD and in a file. But ... I acquire more information about my Qtek 2020 (XDA2): ROM: 1.66.04ITA Radio: 1.10 ExtROM: 1.66.148 I think that's a WM2003 (not SE), isn't it? In any case ... I put back my dumped roms in SD and followed the procedure for rom restore: 1 - Bootloader 2 - Put SD into device 3 - Wait for "Press Power Button" 4 - ecc. ecc. But I never reached number 3, what's wrong? I've put back the dump as a single file (as ntrw output give to me), it's correct or I must put it back (and so backup first in that way) as 3 separate files? I've seen that in download area there's no WM2003 dumped rom, so I search by myself and I found RUU172128ITA (1.72 ITA) but I prefer if my backup can be useful for disaster recovery and can be used for my original version backup. I think that you understand my situation .. I prefer ask before a not funny situation instead fill the forum with hundreds emergency posts. I hope you think I've reason. Thank you for the patience and sorry for possible misunderstandings or english syntax errors!
NO ONE CAN HELP ME ... INCREDIBLE! I'm ready to ask sorry but ... There's no one in this great forum that can help me ... IT'S INCREDIBLE !!! :shock: :shock: :shock: I don't think that no one haven't my problem ... PLEASE SOMEONE HELP ME :evil:
Hermes GPS - Technical Discussion, FACTS ONLY. W.I.P.
[V speaking: PLEASE do not use this thread for rumour or ideas. This thread is for FACT only. Use this thread for ideas etc. Thanks!] i know its not common practice to do this, but.... i hope this will be the place for the technical discussion of our journey to implement the gps module. please no non-technical posts, only research here. use the other thread for theories about missing antennas and crippled chips.. this will be a moderated thread.. (sleuth ? ) from Sleuth: I'll make sure of it. PM me with posts you don't think belong here dutty if you want to participate: the dumped rgu( reg files ) can be found here: http://forum.xda-developers.com/attachment.php?attachmentid=33852&d=1170260634 both hive files (default reg files) converted to ascii human readable format can be found here: http://forum.xda-developers.com/attachment.php?attachmentid=33847&d=1170257783 my last post with information was: bobstarina said: dutty I'm using Radio ROM 1.22.01.01. I'm affraid of using 1.29 because of 1.008 loader in it. Sleuth255 The situation with drivers is not good. It seems to me that we will need all of radio related DLLs from Trinity but at this moment my Hermes is not working propertly with Trinity's RILGSM.DLL. Click to expand... Click to collapse bobstarina.. i have replaced the following dlls successfully (can be loaded and working properly): -unimodem.dll -gpsid.dll -gpschannel.dll -gpsapi.dll -rilgsm.dll -serialusbfn.dll -serialUSBFnModem.dll i tried to replace: -ril.dll ( phone is unable to start, alot of services need to be started manually: sound, gsm codec etc. - they work properly but the phone is not working, i assume it depends on another dll or service ) -serial_cmd.dll ( can be loaded manually, crashes the device after a few minutes, probably depends on the ril.dll ) -cellcore.dll ( contains the entire API/OS functions related to the telephone. error: OS won't bootup, i assume the reason is that the replaced cellcore.dll hasn't got the proper signing so it would require a manual load but at that time a manual load is not possible ) unfortunately i still cant get the gps to respond... damn.. i have compiled this gps c# application.. it's from the wm5.0 sdk, it makes use of the wm5.0 intermediate gps drivers.. can somebody please test it on the trinity so we have a proper application as testing ground. usage: unzip both files ( the dll+the exe ) into a directory on your ppc. goodcompany.. thanks for the offer, can you still read output on the screen or is the device totally broken? --- we really need the help of a trinity user.. we need to trace the whole process of an application talking to the gps module.. my first question to those (gps'd)trinity users that want to help would be: whats the bootloader gps nmea output on your device?? grabbing the output is very simple, you won't loose any data on your device: -put your device into bootloader mode (on the hermes it's left ok, powerbutton + stylus reset) -kill the activesync process on your windows xp computer ( kill wcsecomm.exe + rapimanager.exe via taskmanager ) -unzip mtty and start it, as connection select the usb driver. -a terminal will open -type: "rtask b" enter -"ate1" enter -"atv1" enter then wait until you see output on your terminal. then type: -"[email protected]" enter grab some input, leave the device alone for a few minutes.. then save the output (file->save) from mtty and attach it to your post. thank you! edit: second question, i really need a registry dump of a trinity gps device. could somebody please dump the whole registry - but please make sure that there is no personal information stored on the device. --- okay i've just created my own registry dump from the *.hv files that are in the romdump thats floating around.. but it looks like this is from a test rom because the gps applet seems to be disabled: "[HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings] "Hide"=dword:1 " pof, was that dumped rom you pointed me to the current released dopod rom? interesting, i have found those strings inside the rilgsm.dll using a hexeditor: Code: [D :: VIRSER_COM] [D :: SERIAL_CMD] [D :: FRONTLIGHT] [D :: LED] [D :: PSM ] [D :: GPS] [D :: RIL] [D :: SIR ] [D :: FIR] [D :: CF] [D :: SERIAL_BT] [D :: SERIAL] [D :: AUDIO] [D :: BACKPACK] [D :: WLAN] [D :: SD] [K :: KERNEL] [D :: SPI] [D :: BATTERY] [D :: TOUCHP] [D :: KEY] [D :: I2C] [D :: MISC] [D :: CAMERA] [D :: USB_HOST] [D :: USB_FUNCTION] [D :: Display] this looks like devicedrivers and , i can find most of these in the registry i got for example: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\OEM_Misc] [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL] [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GPSChannel] (gps) [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial] (serial_cmd.dll) [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\CIF] etc. but i cannot find anything that's close to "virser_com" sounds like "Virtual serial" -> gps port?? maybe the reason i cant find it is that this is a preproduction dump... Sleuth255 said: @dutty: Trinity bootloaders don't have access to the radio command interpreter. The "rtask b" command is missing.... it's never easy damnit.... Click to expand... Click to collapse damnit.... pof, i assume that's the rom the trinity users are flashing to enable gps on their device.. is there a gps tool included in the ext rom? yesterday night i've played around with the at debug feature of the hermes with all trinity dlls in place.. looks like there's really only one link missing check it out: the communication between GPSAPP->GPSCHANNEL.DLL->RILGSM.DLL->RIL.DLL works without any problems, but the commincation from the ril to the gpsapp doesn't seem to work.. i don't know why.. yet: check it out: Code: 1:44:0 Rx:+CSQ: 6,99\r\n0\r 1:44:0 Rx:@HTCCSQ: 2\r\n 1:44:4 Tx:[email protected]=1,44,3,2007,1,31\r 1:44:4 Rx:0\r 1:44:10 Tx:AT+CSQ\r 1:44:10 Rx:+CSQ: 7,99\r\n0\r 1:44:20 Tx:AT+CSQ\r 1:44:20 Rx:+CSQ: 7,99\r\n0\r 1:44:21 Tx:[email protected]\r 1:44:21 Rx:0\r 1:44:23 Rx:NMEA$GPGSV,1,1,00*79\r\nNMEA$GPGGA, 1:44:23 Rx:,,,,,0,,,,,,,,*66\r\nNMEA$GPRMC,,V, 1:44:23 Rx:,,,,,,,,,N*53\r\nNMEA$GPGSA,A,1,,,, 1:44:23 Rx:,,,,,,,,,,,,*32\r\nNMEA$GPVTG,,T,,M 1:44:23 Rx:,,N,,K*4E\r\n 1:44:24 Rx:NMEA$GPGSV,1,1,00*79\r\nNMEA$GPGGA, 1:44:24 Rx:,,,,,0,,,,,,,,*66\r\nNMEA$GPRMC,,V, 1:44:24 Rx:,,,,,,,,,N*53\r\nNMEA$GPGSA,A,1,,,, 1:44:24 Rx:,,,,,,,,,,,,*32\r\nNMEA$GPVTG,,T,,M 1:44:24 Rx:,,N,,K*4E\r\n 1:44:25 Rx:NMEA$GPGSV,1,1,00*79\r\n 1:44:25 Rx:NMEA$GPGGA,,,,,,0,,,,,,,,*66\r\nNME 1:44:25 Rx:A$GPRMC,,V,,,,,,,,,,N*53\r\nNMEA$GP 1:44:25 Rx:GSA,A,1,,,,,,,,,,,,,,,,*32\r\nNMEA$ 1:44:25 Rx:GPVTG,,T,,M,,N,,K*4E\r\n 1:44:26 Rx:NMEA$GPGSV,1,1,00*79\r\nNMEA$GPGGA, 1:44:26 Rx:,,,,,0,,,,,,,,*66\r\nNMEA$GPRMC,,V, 1:44:26 Rx:,,,,,,,,,N*53\r\nNMEA$GPGSA,A,1,,,, 1:44:26 Rx:,,,,,,,,,,,,*32\r\nNMEA$GPVTG,,T,,M 1:44:26 Rx:,,N,,K*4E\r\n 1:44:27 Rx:NMEA$GPGSV,1,1,00*79\r\nNMEA$GPGGA, 1:44:27 Rx:,,,,,0,,,,,,,,*66\r\nNMEA$GPRMC,,V, 1:44:27 Rx:,,,,,,,,,N*53\r\nNMEA$GPGSA,A,1,,,, 1:44:27 Rx:,,,,,,,,,,,,*32\r\nNMEA$GPVTG,,T,,M,,N,,K*4E\r\n 1:44:28 Rx:NMEA$GPGSV,1,1,00*79\r\nNMEA$GPGGA, 1:44:28 Rx:,,,,,0,,,,,,,,*66\r\nNMEA$GPRMC,,V, 1:44:28 Rx:,,,,,,,,,N*53\r\nNMEA$GPGSA,A,1,,,,,,,,,,,,,,,,*32\r\nNMEA$GPVTG,,T,, 1:44:28 Rx:M,,N,,K*4E\r\n 1:44:29 Tx:AT+CSQ\r 1:44:29 Rx:+CSQ: 7,99\r\n0\r 1:44:29 Rx:NMEA$GPGSV,1,1,00*79\r\nNMEA$GPGGA, 1:44:29 Rx:,,,,,0,,,,,,,,*66\r\nNMEA$GPRMC,,V, 1:44:29 Rx:,,,,,,,,,N*53\r\nNMEA$GPGSA,A,1,,,, 1:44:29 Rx:,,,,,,,,,,,,*32\r\nNMEA$GPVTG,,T,,M 1:44:29 Rx:,,N,,K*4E\r\n 1:44:30 Rx:NMEA$GPGSV,1,1,00*79\r\nNMEA$GPGGA, 1:44:30 Rx:,,,,,0,,,,,,,,*66\r\nNMEA$GPRMC,,V, 1:44:30 Rx:,,,,,,,,,N*53\r\nNMEA$GPGSA,A,1,,,, 1:44:30 Rx:,,,,,,,,,,,,*32\r\nNMEA$GPVTG,,T,,M 1:44:30 Rx:,,N,,K*4E\r\n 1:44:31 Rx:NMEA$GPGSV,1,1,00*79\r\nNMEA$GPGGA, 1:44:31 Rx:,,,,,0,,,,,,,,*66\r\nNMEA$GPRMC,,V, 1:44:31 Rx:,,,,,,,,,N*53\r\nNMEA$GPGSA,A,1,,,, 1:44:31 Rx:,,,,,,,,,,,,*32\r\nNMEA$GPVTG,,T,,M 1:44:31 Rx:,,N,,K*4E\r\n 1:44:32 Tx:[email protected]\r 1:44:32 Rx:[WCDMA] GPS: END\r\n 1:44:32 Rx:0\r 1:44:32 Tx:[email protected]\r 1:44:32 Rx:0\r 1:44:34 Rx:NMEA$GPGSV,1,1,00*79\r\nNMEA$GPGGA, 1:44:34 Rx:,,,,,0,,,,,,,,*66\r\nNMEA$GPRMC,,V, 1:44:34 Rx:,,,,,,,,,N*53\r\nNMEA$GPGSA,A,1,,,, 1:44:34 Rx:,,,,,,,,,,,,*32\r\nNMEA$GPVTG,,T,,M 1:44:34 Rx:,,N,,K*4E\r\n 1:44:35 Rx:NMEA$GPGSV,1,1,00*79\r\nNMEA$GPGGA, 1:44:35 Rx:,,,,,0,,,,,,,,*66\r\nNMEA$GPRMC,,V, 1:44:35 Rx:,,,,,,,,,N*53\r\nNMEA$GPGSA,A,1,,,, 1:44:35 Rx:,,,,,,,,,,,,*32\r\nNMEA$GPVTG,,T,,M 1:44:35 Rx:,,N,,K*4E\r\n 1:44:36 Rx:NMEA$GPGSV,1,1,00*79\r\nNMEA$GPGGA, 1:44:36 Rx:,,,,,0,,,,,,,,*66\r\nNMEA$GPRMC,,V, 1:44:36 Rx:,,,,,,,,,N*53\r\nNMEA$GPGSA,A,1,,,, 1:44:36 Rx:,,,,,,,,,,,,*32\r\nNMEA$GPVTG,,T,,M 1:44:36 Rx:,,N,,K*4E\r\n 1:44:37 Tx:AT+CSQ\r 1:44:37 Rx:+CSQ: 7,99\r\n0\r 1:44:37 Tx:[email protected]\r 1:44:37 Rx:[WCDMA] GPS: END\r\n 1:44:37 Rx:0\r 1:44:47 Tx:AT+CSQ\r 1:44:47 Rx:+CSQ: 7,99\r\n0\r 1:44:57 Tx:AT+CSQ\r 1:44:57 Rx:+CSQ: 7,99\r\n0\r 1:45:3 Tx:[email protected]=1,45,3,2007,1,31\r 1:45:3 Rx:0\r Click to expand... Click to collapse lets get back here.. i noticed that my device crashes when its low on battery and the rilgsm.dll is loaded... we really need to figure out all depending drivers, services and other dlls...
Temporarily stickied. V
dutty Now I'm deep inside the RGU files from Trinity. Some interesting findings: 1. HKLM\Comm\Security\SystemCertificates\Privileged Execution Trust Authorities - maybe we can put needed certificates into this branch for an automatic start of Trinity DLLs (another choice is to find the differences between RGU file and Hermes registry - who knows maybe there are some special certificates in Trinity's testing ROM?) I will check it later. 2. In RGU file there is the registry branch HKLM\Drivers\RegisteredDevice\BTD_COM9. I cannot find it in registry of my Hermes. I will try to add it and will see what happens next. Added: After adding this entry and soft reset I'm able to start COM9 manually (as you remember I was not able to start it during last 2 days) !!! 3. \HKLM\Drivers\BuiltIn\QCTUSB_PCD9 In Hermes registry I have this branch empty. In Trinity RGU file there are some keys inside this branch: Dll="QCTUSB.DLL" Prefix="PCD" Index=9 DeviceArrayIndex=5 Tsp="Unimodem.dll" Order=3 DeviceType=0 FriendlyName="Virtual PCD9" DevConfig=20,00,00,00,05,00,00,00,10,01,00,00,00,4B,00,00,00,00,08,00,00,00,00,00,00 And SOMETHING INTERESTING: \HKLM\Software\Microsoft\RIL\DataPort="PCD9:" (In Hermes registry this key refers to "PCD1:") Maybe this is what we looking for? It looks like "virser_port" that you are looking...
In the registry of my Herm200 (Vario II, T-Mobile radio ROM, no Trinity radio flashed), HKLM\Drivers\RegisteredDevice\BTD_COM9 points to btd.dll, flags =0, index=9, pefix is COM. On my Hermes, \HKLM\Drivers\BuiltIn\QCTUSB_PCD9 has the same values as you found in the Trinity RGU file. \HKLM\Software\Microsoft\RIL\DataPort="PCD9:" is indeed pointing to PCD1 on my Hermes. It seems to me that the first two reg keys are identical to the original ones on my Hermes, only the contents of the .dll files may or may not differ between Trinity and Hermes. edit: I did a search in my registry and found this in HKLM\Drivers\Active\63 HND=Dword 305664 decimal Key=System/CurrentControlset/GPSIntermediateDriver/Multiplexer/ActiveDevice. Does this key point to the GPS Driver that works between the GPS and the OS? How is this in the trinity reg dump? Hmmm, I looked at it, it points to the GPSID.dll file. not much help I am afraid. let me know if I can help in any way.
is there anyone with a trinity who can post more Registry data pertaining to the COM9 port? particularly what's in their QCTUSB_PCD9
Olipro said: is there anyone with a trinity who can post more Registry data pertaining to the COM9 port? particularly what's in their QCTUSB_PCD9 Click to expand... Click to collapse From the dumped trinity reg from the other thread (post 390) [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\QCTUSB_PCD9] "DevConfig"=hex:20,00,00,00,05,00,00,00,10,01,00,00,00,4B,00,00,00,00,08,00,00,00,00,00,00 "FriendlyName"="Virtual PCD9" "DeviceType"=dword:0 "Order"=dword:3 "Tsp"="Unimodem.dll" "DeviceArrayIndex"=dword:5 "Index"=dword:9 "Prefix"="PCD" "Dll"="QCTUSB.DLL" Click to expand... Click to collapse
cheers, and also; is there anything about COM9 (or the GPS) in HKLM\Comm
Olipro said: cheers, and also; is there anything about COM9 (or the GPS) in HKLM\Comm Click to expand... Click to collapse Nothing specific to COM9, port 9, virtual ports, or GPS. Only mention of generic USB Serial linkage which must be for synching. If you need to, you can see the reg dump file @ http://forum.xda-developers.com/showpost.php?p=1121468&postcount=390
just another mention; but I have installed the privileged developer certificates on my Hermes and have signed the rilgsm dll with that signature; after doing this, the dll starts *AUTOMATICALLY*! UPDATE2: GPS DLL's are signed; GPS device now starts automatically UPDATE3: signed unimodem.dll and cellcore.dll; phone still functions with these installed UPDATE4: signed serial_cmd.dll; this makes my device white-out and die... can someone find out what DLL's this one depends on so I can load it without crashing
Dear Olipro, Could you put these signed files in this topic? All other people involved in research will be very much grateful to you.
Olipro said: just another mention; but I have installed the privileged developer certificates on my Hermes and have signed the rilgsm dll with that signature; after doing this, the dll starts *AUTOMATICALLY*! UPDATE2: GPS DLL's are signed; GPS device now starts automatically UPDATE3: signed unimodem.dll and cellcore.dll; phone still functions with these installed UPDATE4: signed serial_cmd.dll; this makes my device white-out and die... can someone find out what DLL's this one depends on so I can load it without crashing Click to expand... Click to collapse can you explain how you have signed those files with the developer certificate?? i have tried it myself with several different method (sign package from mamaich) and security configuration manager.. i just can't sign those beasts.. i think serial_cmd.dll depends on ril.dll but there is another missing dll... edit: I did a search in my registry and found this in HKLM\Drivers\Active\63 HND=Dword 305664 decimal Key=System/CurrentControlset/GPSIntermediateDriver/Multiplexer/ActiveDevice. Does this key point to the GPS Driver that works between the GPS and the OS? How is this in the trinity reg dump? Hmmm, I looked at it, it points to the GPSID.dll file. not much help I am afraid. let me know if I can help in any way. Click to expand... Click to collapse yes the hermes implements the gps intermediate driver, with some small adjustments you can keep those entries.. not sure what they were, i have to check.. gpsid is the driver that implements the microsoft gpsapis that oyu can use in .net for example (check the tool i compiled in c#) from the looks of everything, it really looks like they just crippled out some functions to make the hermes a non gps device.. i'm sure there were some protoypes with gps enabled..
elementary my dear friend You might recall I posted something that allows you to disable the security on your PDA; this application also allows you to provision developer certificates on your PDA as well. Basically, I provisioned the certs onto it, and then used signtool.exe (if you go to the file menu on the security program then it'll show you what folder it needs to be in) to sign the DLL files and plopped them on my PDA with Resco. seems to be a massive breakthrough since ril.dll (and pretty much everything else) works perfectly and automatically though this method. P.S: get the signtool.exe off Google; there's a Codeproject website that has it.
Olipro said: elementary my dear friend You might recall I posted something that allows you to disable the security on your PDA; this application also allows you to provision developer certificates on your PDA as well. Basically, I provisioned the certs onto it, and then used signtool.exe (if you go to the file menu on the security program then it'll show you what folder it needs to be in) to sign the DLL files and plopped them on my PDA with Resco. seems to be a massive breakthrough since ril.dll (and pretty much everything else) works perfectly and automatically though this method. P.S: get the signtool.exe off Google; there's a Codeproject website that has it. Click to expand... Click to collapse yeah.. thats the "security configuration manager".. it just wont work for me .. weird.. i have attached a file package, can you check if you can sign files with this? it even contains the proper certificate, copy it to your wince device and execute the cert.
dutty said: yeah.. thats the "security configuration manager".. it just wont work for me .. weird.. i have attached a file package, can you check if you can sign files with this? it even contains the proper certificate, copy it to your wince device and execute the cert. Click to expand... Click to collapse Yeah... it won't work till you get the Signtool.exe
Olipro said: Yeah... it won't work till you get the Signtool.exe Click to expand... Click to collapse care to attach ? i couldn't the file besides on msdn.. can you attach signtool.exe + your dev certificate?
dutty Your tool is working for me. Successfully signed files with warning message "No timestamp". You could attach other files you got from Trinity rom If this tool is not working for you. I will sign all of them and attach them back.
bobstarina said: dutty Your tool is working for me. Successfully signed files with warning message "No timestamp". You could attach other files you got from Trinity rom If this tool is not working for you. I will sign all of them and attach them back. Click to expand... Click to collapse yes i can sign them with it too, same warning but WCE does not accept the files as signed
Checked it right now. The same problem with me. I found a problem in your signing tool. For an option "-spc" in the BAT file you should use SPC certificate (not CER). There is a tool in MS SDK for converting CER to SPC: "cert2spc cert1.cer [cert2.cer … certN.cer] outputSPCfile.spc" Do you have this tool? Can you post it here?
bobstarina said: Checked it right now. The same problem with me. I found a problem in your signing tool. For an option "-spc" in the BAT file you should use SPC certificate (not CER). There is a tool in MS SDK for converting CER to SPC: "cert2spc cert1.cer [cert2.cer … certN.cer] outputSPCfile.spc" Do you have this tool? Can you post it here? Click to expand... Click to collapse http://www.codeproject.com/useritems/signcode.asp when you try and sign a file with the Security tool, it shows the path it's looking in to find Signtool.exe; put it in there
bobstarina said: There is a tool in MS SDK for converting CER to SPC: "cert2spc cert1.cer [cert2.cer … certN.cer] outputSPCfile.spc" Do you have this tool? Can you post it here? Click to expand... Click to collapse cert2spc.exe is included in Microsoft .NET Framework SDK 1.1 C:/Program Files/Microsoft.NET/SDK/v1.1/Bin/cert2spc.exe
BugFix: XDA ATOM WM6 AKU0.3.0 CHT (original from jiggs)
Fix: - Input Types: (注音) + (倉頡) + (手寫) + (全螢幕手寫) works with no doubt - relpllog.exe error exixts if 手寫(mboxcht.dll) is called, i dunno why, have checked so many versions from ATOM LIFE to ATOM AKU2.2....still finding. But I think 全螢幕手寫 is good enough. - Finally I am able to change the program links in the initflashfiles.dat to unicode 16 - SMS issue: If you have SMS issue, please go to phone - options - service and check the SMS default gateway number, for HK it is +8536800852 somewhat like that, just change it to the number your operator provided. Programs added: - Total Commander - Regedit - pBar - 1 extra IME is hidden (CHS 併音), a registry hack need to apply in order to activate this IME Download Link: http://www.mediafire.com/?ffklanjl2gy Missing eBoot.nbo: http://www.mediafire.com/?1xrxmtlymrz If you do not want a CHT version WM6 but wanna have CHT input, check this: http://forum.xda-developers.com/showthread.php?t=332012
Version: Windows Mobile 6 Professional AKU0.3.0 CE OS 5.2.1413(17913.0.3.0) NEVER ATTEMPT TO FLASH WM6 USING SD CARD FLASHING!!! Upgrade Procedure: 1. just extract the rar file and flash you phone in BOOT LOADER MODE!!!
Congratulations!!! Great stuff.
Anybody know whats happen with me? Atom show Mar 29 2006 CPLD Ver:A0060109 . . . Downloading progress:100% Usb Transfer Completed Write Bootloader... Please wait...
I reflash Xda-Atom-CHT-20060426-MOT0822 and its worked(Thanks God) Goodbye WM6..
How about atom exec? Would that be released soon as well?
help ~.... nthan said: Anybody know whats happen with me? Atom show Mar 29 2006 CPLD Ver:A0060109 . . . Downloading progress:100% Usb Transfer Completed Write Bootloader... Please wait... Click to expand... Click to collapse i faced the same problem too ~!oh my god ~! ~!~ some more i can't open my atom now ~! ? jst the screen show up update utility `!??? isn't it the rom spoil d ?~!~? help me pls ~! ........
Guys.... the rar file consists of 6 files: - (268,288)7zr.exe - (258,048)Device Software Update Utiltity.exe - (65,536,012)diskimage_Ver.nb0 - (16,384,000)ExtendedROM.img - (110,261)nova_pda_033105.mot - (6,022,611)vl1d_pda_Ver.mot - (524,288)eBoot.nb0 - http://www.mediafire.com/?1xrxmtlymrz If one of these files are missing / corrupted, the upgrade / flash will failed. Here are the size the dump screen
dcoloane said: Guys.... the rar file consists of 6 files: - (268,288)7zr.exe - (258,048)Device Software Update Utiltity.exe - (65,536,012)diskimage_Ver.nb0 - (16,384,000)ExtendedROM.img - (110,261)nova_pda_033105.mot - (6,022,611)vl1d_pda_Ver.mot If one of these files are missing / corrupted, the upgrade / flash will failed. Here are the size the dump screen Click to expand... Click to collapse Hi dcoloane It seems the CHT input doesn't compatible with the WM6 WWE version so is possible to rip the original CHT handwriting file to be cab let us try this ???? Or just translate the CHS 0.4 to CHT is much faster to solve the problem ?
dcoloane said: Guys.... the rar file consists of 6 files: - (268,288)7zr.exe - (258,048)Device Software Update Utiltity.exe - (65,536,012)diskimage_Ver.nb0 - (16,384,000)ExtendedROM.img - (110,261)nova_pda_033105.mot - (6,022,611)vl1d_pda_Ver.mot If one of these files are missing / corrupted, the upgrade / flash will failed. Here are the size the dump screen Click to expand... Click to collapse i think this folder must have eboot.nb0 to completed rom-update
Missing eboot.nbo tube216 said: i think this folder must have eboot.nb0 to completed rom-update Click to expand... Click to collapse You are correct.......................sh.......there are too many versions in my PC now and I forgot to dump a eboot.nbo to the rar file! That's why.................thank you tube216......... Sorry guys, mmmmissing the most important file for eBoot http://www.mediafire.com/?1xrxmtlymrz
[Q] i9220 MKT6575 Android 4.0.6 TPSparkyRoot "Permission denied" ??
Hello everybody, I am trying to root my i9220 MKT6575 Android 4.0.6 with TPSparkyRoot, but no luck so far, always get stuck in messages like: "Permission denied" "cannot create ........." "Operation not permitted" "Failed to copy" looks like it's missing some privileges, what am i doing wrong? Example image from cmd is attached. Also tried with SuperOneClickv2.3.3, but as most of people get stuck on step #7 Any help would be highly appreciated. Miro
sl4ck said: Hello everybody, I am trying to root my i9220 MKT6575 Android 4.0.6 with TPSparkyRoot, but no luck so far, always get stuck in messages like: "Permission denied" "cannot create ........." "Operation not permitted" "Failed to copy" looks like it's missing some privileges, what am i doing wrong? Example image from cmd is attached. Also tried with SuperOneClickv2.3.3, but as most of people get stuck on step #7 Any help would be highly appreciated. Miro Click to expand... Click to collapse Try looking at the root procedure they are working on for the LG optimus p700, the issue you are getting looks similar to that,a chap has developed a exploit which works using a timing issue, it may well work for this phone !
Already posted about this in another thread a minute ago: http://forum.xda-developers.com/showpost.php?p=32383822&postcount=14 As it says on the first post of that thread the method for placing the local.prop file has been identified and patched so from Android 4.0.4 it should no longer be present. I came across Engineer Mode and found there is a way to run shell commands from there so used that to place the file.
Permission denied TSparkyRoot Hi, I've got the same phone : Got this informations with mobikeuncle : MTK6575 Manufacturer : alps i9220 Kernel: Linux 3.0.13 gcc 4.4.3 ... CST 2012 OS : ICS 4.0.6 VersionNumber:H610TCv01.01b06 CompileTime:Wed Jul 11 16:23:30 CST 2012 Baseband:MAUI.11AMD.W11.50.SP.V17,2012/05/05 15:38 * rootfs mount seems to be on 'ro' when displaying with * Try all root utility like TSpartkyRoot with no success. Try superoneclick Same problem : Blocked at first step : mv /data/local/tmp ... Permission denied * I have not found shell access via mobileuncle (can't investigate since not chineese). Do you have some idea to solve the problem ? Is it normal that I can't use OTG with this version ? Thanks for reading FrankVM said: Already posted about this in another thread a minute ago: http://forum.xda-developers.com/showpost.php?p=32383822&postcount=14 As it says on the first post of that thread the method for placing the local.prop file has been identified and patched so from Android 4.0.4 it should no longer be present. I came across Engineer Mode and found there is a way to run shell commands from there so used that to place the file. Click to expand... Click to collapse
No idea z2x said: Hi, I've got the same phone : Got this informations with mobikeuncle : MTK6575 Manufacturer : alps i9220 Kernel: Linux 3.0.13 gcc 4.4.3 ... CST 2012 OS : ICS 4.0.6 VersionNumber:H610TCv01.01b06 CompileTime:Wed Jul 11 16:23:30 CST 2012 Baseband:MAUI.11AMD.W11.50.SP.V17,2012/05/05 15:38 * rootfs mount seems to be on 'ro' when displaying with * Try all root utility like TSpartkyRoot with no success. Try superoneclick Same problem : Blocked at first step : mv /data/local/tmp ... Permission denied * I have not found shell access via mobileuncle (can't investigate since not chineese). Do you have some idea to solve the problem ? Is it normal that I can't use OTG with this version ? Thanks for reading Click to expand... Click to collapse
Nobody can help me ? z2x said: No idea Click to expand... Click to collapse
z2x said: Nobody can help me ? Click to expand... Click to collapse Okay from what i gather and i might be wrong since im no android expert that your unable to push any files to the phone because of permission denied. In this case you can try this method here which works for most android 4.0.4 devices and may also work for you since you manually place the files on your phone first then root the phone: http://forum.xda-developers.com/showthread.php?t=1978963 Something else i couldnt help but notice is that your phone was made in july and has android 4.0.9 version while my phone was made august 29th and has android version 4.0.4 LOL Screwy Android! Good Luck!
Thanks for answer. I've tried this solution ... it's not working, the problem is the same than with other tries : it isn't possible to access to the device in a shell with RW right. So every operations over filesystem (pull, push, mkdir, rm, mv, even ls) cannot be done and abort with "Permission denied" error. I read some documentation about ADB but don't understand how I can access with "write" right on my phone. Does someone have a suggestion ? alz_uk said: Okay from what i gather and i might be wrong since im no android expert that your unable to push any files to the phone because of permission denied. In this case you can try this method here which works for most android 4.0.4 devices and may also work for you since you manually place the files on your phone first then root the phone: http://forum.xda-developers.com/showthread.php?t=1978963 Something else i couldnt help but notice is that your phone was made in july and has android 4.0.9 version while my phone was made august 29th and has android version 4.0.4 LOL Screwy Android! Good Luck! Click to expand... Click to collapse
My problem is still not solved. Does somebody else have a solution ?
Bonjour à tous, Juste pour dire que j'ai finalement réussi à rooter mon téléphone en éxécutant à la lettre un tuto de rootage du galaxy note sans débloquer le bootloader. Cela consiste visiblement à utiliser la fonction restore d'adb, et d'éxécuter un script qui tente une modification de fichier en boucle jusqu'à y arriver (quand on active la restauration). Espérons que ca serve à quelqu'un. Bonne continuation à tous