not receiving text messages? - Droid Eris Q&A, Help & Troubleshooting

hopefully this is the right section....
Hey xda, ive been have trouble with my rooted froyo eris. im not receiving text messages at all from anyone, even when i know they just texted me. i know this problem isnt related to the rom or froyo itself, as ive tried both tazz's rom and kaos's. plus i havent had this problem on froyo before. any ideas?

You probably do not have the correct APN files anymore. These let your phone know which towers to connect to. You may have used a ROM that was based on a ROM from another carrier (like Sprint). Try this:
1. Boot into recovery and make a nandroid backup.
2. Download a ROM with the correct APN files, like Plain Jane (basically a stock ROM with root). One version of Plain Jane can be found here:
hxxp://ip208-100-42-21.static.xda-developers.com/showthread.php?t=718092/ ( I don't think I can post links yet so change hxxp to http)
3. Do a full data wipe in recovery and then install the Plain Jane ROM.
4. Reboot into the new ROM.
5. Make sure 3G and Sync is on and you should get all your missed text messages, once everything is finished syncing.
6. On the market, grab the app "APN Backup & Restore".
7. Run APN Backup & Restore and bachup your APNs. The app will create a folder on you SD card with the APN files. Hold on to those files and if you wipe your SD, make sure you back them up somewhere.
8. Then you can restore to your nandroid backup or load any other ROM. The just run "APN Backup & Restore" and restore you APNs.
I hope this helps you.

Instead of going through the trouble of nand backup, flashing a generic ROM, etc., just stay with your current ROM, download APN Backup and Restore from the market and paste the following XML into a text editor like notepad, name the file original-apns.xml and put it in /sdcard/ApnBackupRestore/. Run APN Backup and Restore from the phone and restore the apn from there.
Below is the code for Verizon Droid Eris (won't work for Hero).
Code:
<?xml version='1.0' encoding='UTF-8' standalone='yes' ?>
<apns count="3">
<apn name="CDMA" numeric="00000" mcc="000" mnc="00" apn="0" user="null" server="null" password="null" proxy="null" port="" mmsproxy="" mmsport="" mmsprotocol="" mmsc="" type="*" />
<apn name="Production" numeric="00000" mcc="000" mnc="00" apn="1" user="null" server="null" password="null" proxy="null" port="" mmsproxy="" mmsport="" mmsprotocol="2.0" mmsc="http://mms.vtext.com/servlets/mms" type="mms" />
<apn name="Android" numeric="310995" mcc="310" mnc="995" apn="internet" user="*" server="*" password="*" proxy="null" port="null" mmsproxy="null" mmsport="null" mmsprotocol="null" mmsc="null" type="null" />
</apns>

dreed75 said:
Instead of going through the trouble of nand backup, flashing a generic ROM, etc., just stay with your current ROM, download APN Backup and Restore from the market and paste the following XML into a text editor like notepad, name the file original-apns.xml and put it in /sdcard/ApnBackupRestore/. Run APN Backup and Restore from the phone and restore the apn from there.
Below is the code for Verizon Droid Eris (won't work for Hero).
Code:
<?xml version='1.0' encoding='UTF-8' standalone='yes' ?>
<apns count="3">
<apn name="CDMA" numeric="00000" mcc="000" mnc="00" apn="0" user="null" server="null" password="null" proxy="null" port="" mmsproxy="" mmsport="" mmsprotocol="" mmsc="" type="*" />
<apn name="Production" numeric="00000" mcc="000" mnc="00" apn="1" user="null" server="null" password="null" proxy="null" port="" mmsproxy="" mmsport="" mmsprotocol="2.0" mmsc="http://mms.vtext.com/servlets/mms" type="mms" />
<apn name="Android" numeric="310995" mcc="310" mnc="995" apn="internet" user="*" server="*" password="*" proxy="null" port="null" mmsproxy="null" mmsport="null" mmsprotocol="null" mmsc="null" type="null" />
</apns>
Click to expand...
Click to collapse
This DID NOT work for me!! Thank you anyway!!!

synesthete said:
You probably do not have the correct APN files anymore. These let your phone know which towers to connect to. You may have used a ROM that was based on a ROM from another carrier (like Sprint). Try this:
1. Boot into recovery and make a nandroid backup.
2. Download a ROM with the correct APN files, like Plain Jane (basically a stock ROM with root). One version of Plain Jane can be found here:
hxxp://ip208-100-42-21.static.xda-developers.com/showthread.php?t=718092/ ( I don't think I can post links yet so change hxxp to http)
3. Do a full data wipe in recovery and then install the Plain Jane ROM.
4. Reboot into the new ROM.
5. Make sure 3G and Sync is on and you should get all your missed text messages, once everything is finished syncing.
6. On the market, grab the app "APN Backup & Restore".
7. Run APN Backup & Restore and bachup your APNs. The app will create a folder on you SD card with the APN files. Hold on to those files and if you wipe your SD, make sure you back them up somewhere.
8. Then you can restore to your nandroid backup or load any other ROM. The just run "APN Backup & Restore" and restore you APNs.
I hope this helps you.
Click to expand...
Click to collapse
So far, doing these steps, i HAVE received text messages. Taking a few attempts to get logged into gmail though...getting irritating, but when I do I am anxiously waiting to receive my text messages under FroShedYo's ROM!!
THANK YOU!!!!!

YES!!! IT WORKED!!!
THANK YOU THANK YOU THANK YOU!!!! Stupid Verizon guy "level 2 tech" said the phone was trash. I will stick to my xda friends next time instead!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I can't thank you enough! I spent so much time on this. This was the ONLY helpful post I could find. THANK YOU!

Same Issue corrected
I had the same exact problem with not receiving text messages my Eris and I followed these steps and now it's fixed!

We like to hear success stories!
Sent from my GingerBread Eris using XDA App

oh thank god.. it worked!!!!! finally getting txts back!!!

Related

[DEV][IDEA] M2D Action Screen Tab - NEED DEVELOPERS HELP

Hi people
All you know that we can use Operator tab as second launcher. Also there is an application from HTC called Action Screen. So I have an idea to transform operator tab to Action Screen tab. But I am not a programmer, so need help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I created cab, test it and leave feedback. All created though the registry. I know it is not comfortable. So maybe one Hero-programmer will realize my idea to complete application??
About cab
Before install please make a backup. Why it is necessary? Because in the cab there is my HTC Homesettings.xml file and I have non-htc device (HP Ipaq 614c), so I don’t know how it will work on your device. Also want to say that I have TouchFLO version 1.0.1818.3719 cooked in ROM
As you can see now it has six icons:
Message (Start new SMS)
Mail (Start new Mail)
Alarm (don’t work (how to create direct shortcut to start new alarm???))
Appointment (New Appointment)
Task (New Task)
Note (New Note)
If you want to change an application to open with, go to registry HKLM\Software\HTC\Manila2D\Operator\2\ and change Path (for example I use G-Alarm to start New Alarm or ThumbCal to start new Appointment and new Task)
Also there are two softkeys: Calendar and Setting. Now don’t work, it is for future. (it can be changed through the registry)
TEST IT AND LEAVE FEEDBACK
PS Sorry for my English ))
great work!
Works great. Thanks. You were right. I had to use my own HomeSettings xml file. After installation TF2D didn't start up.
Another usefull addition to TF2D.
I think you made a backup
Strange grafics you have...
OK lets do so
Edit the HTCHomeSettings.xml as follow:
Find:
Code:
<Image index="227" name="\ManilaGFX\hh_fw_focus_background.png" />
Add this below
Code:
<Image index="228" name="HH_LAUNCHER_BTN_OPR_MASK.png" />
<Image index="229" name="HH_LAUNCHER_BTN_OPR.png" />
<Image index="230" name="HH_LAUNCHER_BTN_OPR_PRESS.png" />
<Image index="231" name="HH_LAUNCHER_BTN_OPR_PRESS_MASK.png" />
<Image index="232" name="HH_LAUNCHER_BTN_OPR_SELECTED.png" />
<Image index="233" name="HH_LAUNCHER_BTN_OPR_SELECTED_MASK.png"/>
Find
Code:
<OperatorWidget>***</OperatorWidget>
Replace with my code
Code:
<Property name="IDOPERATORWG_START_POINT" id="0" value="0, 10" />
<Property name="IDOPERATORWG_Y_INTERVAL" id="1" value="10" />
<Property name="IDOPERATORWG_ROW" id="2" value="3" />
<Property name="IDOPERATORWG_COLUMN" id="3" value="3" />
<Property name="IDOPERATORWG_LASTPROP" id="4" value="0" />
<Property name="IDOPERATORWG_BTNSELECTED_IMGID" id="5" value="HH_LAUNCHER_BTN_OPR_SELECTED.png" />
<Property name="IDOPEARTORWG_BTNSELECTED_MASKIMG" id="6" value="HH_LAUNCHER_BTN_OPR_SELECTED_MASK.png" />
<Property name="IDOPERATORWG_BTNPRESSED_IMGID" id="7" value="HH_LAUNCHER_BTN_OPR_PRESS.png" />
<Property name="IDOPERATORWG_BTNPRESSED_MASKIMG" id="8" value="HH_LAUNCHER_BTN_OPR_PRESS_MASK.png" />
<Property name="IDOPERATORWG_BTN_IMGID" id="9" value="HH_LAUNCHER_BTN_OPR.png" />
<Property name="IDOPERATORWG_BTN_IMGMASK" id="10" value="HH_LAUNCHER_BTN_OPR_MASK.png" />
<Property name="IDOPERATORWG_BTNICON" id="11" value="68" />
<Property name="IDOPERATORWG_BTNTEXT_RECT" id="12" value="3, 90, 80, 77" />
sergiorus said:
I think you made a backup
Strange grafics you have...
Click to expand...
Click to collapse
I think it has adapted the graphics from my current theme which is no problem. It complements the rest of the graphics in theme.
This looks promising. I'll give it a try tonight after my son goes to bed. Thanks for the innovation!
Syd159
post here your HTC Homesettings.xml file
sergiorus said:
Syd159
post here your HTC Homesettings.xml file
Click to expand...
Click to collapse
Here you go.
Code:
<OperatorWidget>
<Property name="IDOPERATORWG_START_POINT" id="0" value="13, 2" />
<Property name="IDOPERATORWG_Y_INTERVAL" id="1" value="0" />
<Property name="IDOPERATORWG_ROW" id="2" value="6" />
<Property name="IDOPERATORWG_COLUMN" id="3" value="3" />
<Property name="IDOPERATORWG_LASTPROP" id="4" value="0" />
<Property name="IDOPERATORWG_BTNSELECTED_IMG" id="5" value="HH_LAUNCHER_BTN_SELECTED.png" />
<Property name="IDOPEARTORWG_BTNSELECTED_MASKIMG" id="6" value="HH_LAUNCHER_BTN_SELECTED_MASK.png" />
<Property name="IDOPERATORWG_BTNPRESSED_IMG" id="7" value="HH_LAUNCHER_BTN_PRESS.png" />
<Property name="IDOPERATORWG_BTNPRESSED_MASKIMG" id="8" value="HH_LAUNCHER_BTN_PRESS_MASK.png" />
<Property name="IDOPERATORWG_BTN_IMG" id="9" value="HH_LAUNCHER_BTN.png" />
<Property name="IDOPERATORWG_BTN_IMGMASK" id="10" value="HH_LAUNCHER_BTN_MASK.png" />
<Property name="IDOPERATORWG_BTNICON_DIMENSION" id="11" value="32" />
<Property name="IDOPERATORWG_BTNTEXT_RECT" id="12" value="-7, 61, 68, 73" />
<Property name="IDLAUNCHERWG_BTN_LASTPROP" id="13" value="0" />
</OperatorWidget>
My Image Index ends at 226.
Replace with this
Code:
<OperatorWidget>
<Property name="IDOPERATORWG_START_POINT" id="0" value="0, 10" />
<Property name="IDOPERATORWG_Y_INTERVAL" id="1" value="10" />
<Property name="IDOPERATORWG_ROW" id="2" value="3" />
<Property name="IDOPERATORWG_COLUMN" id="3" value="3" />
<Property name="IDOPERATORWG_LASTPROP" id="4" value="0" />
<Property name="IDOPERATORWG_BTNSELECTED_IMG" id="5" value="HH_LAUNCHER_BTN_OPR_SELECTED.png" />
<Property name="IDOPEARTORWG_BTNSELECTED_MASKIMG" id="6" value="HH_LAUNCHER_BTN_OPR_SELECTED_MASK.png" />
<Property name="IDOPERATORWG_BTNPRESSED_IMG" id="7" value="HH_LAUNCHER_BTN_OPR_PRESS.png" />
<Property name="IDOPERATORWG_BTNPRESSED_MASKIMG" id="8" value="HH_LAUNCHER_BTN_OPR_PRESS_MASK.png" />
<Property name="IDOPERATORWG_BTN_IMG" id="9" value="HH_LAUNCHER_BTN_OPR.png" />
<Property name="IDOPERATORWG_BTN_IMGMASK" id="10" value="HH_LAUNCHER_BTN_OPR_MASK.png" />
<Property name="IDOPERATORWG_BTNICON_DIMENSION" id="11" value="68" />
<Property name="IDOPERATORWG_BTNTEXT_RECT" id="12" value="3, 90, 80, 77" />
<Property name="IDLAUNCHERWG_BTN_LASTPROP" id="13" value="0" />
</OperatorWidget>
After 226 image add below
Code:
<Image index="227" name="HH_LAUNCHER_BTN_OPR_MASK.png" />
<Image index="228" name="HH_LAUNCHER_BTN_OPR.png" />
<Image index="229" name="HH_LAUNCHER_BTN_OPR_PRESS.png" />
<Image index="230" name="HH_LAUNCHER_BTN_OPR_PRESS_MASK.png" />
<Image index="231" name="HH_LAUNCHER_BTN_OPR_SELECTED.png" />
<Image index="232" name="HH_LAUNCHER_BTN_OPR_SELECTED_MASK.png" />
Let me know if it works
I bet it should work what you are implying, but i like it this way.
Request... could you add a toggle for wifi, bluetooth and phone sound/vibrate? That would be very nice.
I also wanted to re-use that tab, for the m3d weather remade on flash:
http://forum.xda-developers.com/showthread.php?t=471461
Could this be done?
:/
Syd159 said:
I bet it should work what you are implying, but i like it this way.
Request... could you add a toggle for wifi, bluetooth and phone sound/vibrate? That would be very nice.
Click to expand...
Click to collapse
I will try to do additional icons.
I also wanted to re-use that tab, for the m3d weather remade on flash:
http://forum.xda-developers.com/showthread.php?t=471461
Could this be done?
:/
Click to expand...
Click to collapse
Yeah i tested your work, but how to make it work with manila 2D i dont know. I think you should ask a question to BeyondInvisible, he is an author of second weather tab .
Syd159 said:
Request... could you add a toggle for wifi, bluetooth and phone sound/vibrate? That would be very nice.
Click to expand...
Click to collapse
Here M2D Action Screen tab with BT, WiFi and phone sound/vibrate.
Awesome !!
Thanks for sharing !!
Sweet work! I need to try this out later! I can't have anything wrong happen with my device now, but I'll try it tomorrow!
I'm happy to say that it works fine for me, after manually editing my original xml file. Any idea on what reg keys I need to look for to get the softkeys working? And could you either make a contact icon in the style you're posting, or could you provide the blank icon background so we can make our own?
Thanks, and nice job!
sergiorus said:
Strange grafics you have...
Click to expand...
Click to collapse
It's no strange.....
Operator widget have rectangle built in, but if you set btnicon to 68 image overwrite it.
Try to change this row in xml
Code:
<Property name="IDOPERATORWG_BTNICON" id="11" value="[b]45[/b]" />
Thanks for sharing.
Now I have it on my Omnia: with 240 x 400 resolution i can use 3 rows (total 9 buttons)
sergiorus said:
I will try to do additional icons.
Yeah i tested your work, but how to make it work with manila 2D i dont know. I think you should ask a question to BeyondInvisible, he is an author of second weather tab .
Click to expand...
Click to collapse
Thanks, will do that.
sergiorus said:
Here M2D Action Screen tab with BT, WiFi and phone sound/vibrate.
Click to expand...
Click to collapse
This with "New Appointment" instead of "Alarm" would be wonderful
Sascha
it will be nice if we make this tab run once landscape mode is turned on
imagine when u silde out keyboard, m2D become landscape mode (by xml?...whatever ) and automatically goes to action tab (or maybe all tab hide off during this mode....dreaming)
ian't it nice??

[Q] Cant remove original apn

Hello
before i had original branded firmare that allow me to remove originals apn.
After i flashed with original 10c and then with AmberHome V1.1,
those firmwares not allow me to edit or delete standard apn.
I edited /system/etc/apn-conf.xml so
Code:
- <!-- use empty string to specify no proxy or port
-->
- <apns version="6">
<apn carrier="WIND Internet" mcc="222" mnc="88" apn="internet.wind" type="default,supl" />
</apns>
then wiped phone, but when i try to flash phone with apn-conf.xml modified, i have error:
Code:
E:Wrong digest:
/system/etc/apn-conf.xml
E:Verification failed
Instalation aborted
Can i remove unwanted apn?

Why Internet Cant Support In Cyanogenmod10.2?

why internet cant support in cyanogenmod10.2? in samsung fascinate roms nightly 21/2/2013 android4.2.2?
in my country yemen with company yemenmobile(cdma) and in other phone like galaxy s3 and prava support internet
the information for yemen mobile is:
<apn carrier="yemen mobile" numeric="42103" mcc="421" mnc="03" apn="#777" user="ymobile" server="" password="ymobile" proxy="" port="" mmsproxy="" mmsport="" mmsprotocol="null" mmsc="" type="" />
please help me for this problem
thanks for any person
fawzisaeed said:
why internet cant support in cyanogenmod10.2? in samsung fascinate roms nightly 21/2/2013 android4.2.2?
in my country yemen with company yemenmobile(cdma) and in other phone like galaxy s3 and prava support internet
the information for yemen mobile is:
<apn carrier="yemen mobile" numeric="42103" mcc="421" mnc="03" apn="#777" user="ymobile" server="" password="ymobile" proxy="" port="" mmsproxy="" mmsport="" mmsprotocol="null" mmsc="" type="" />
please help me for this problem
thanks for any person
Click to expand...
Click to collapse
First of all its CyanogenMod 10.1 and I can you rewrite that I couldn't understand half of that
Sent from my SCH-I500 using Tapatalk 2
fawzisaeed said:
why internet cant support in cyanogenmod10.2? in samsung fascinate roms nightly 21/2/2013 android4.2.2?
in my country yemen with company yemenmobile(cdma) and in other phone like galaxy s3 and prava support internet
the information for yemen mobile is:
<apn carrier="yemen mobile"
numeric="42103"
mcc="421"
mnc="03"
apn="#777"
user="ymobile"
server=""
password="ymobile"
proxy=""
port=""
mmsproxy=""
mmsport=""
mmsprotocol="null"
mmsc="" type="" />
please help me for this problem
thanks for any person
Click to expand...
Click to collapse
You could try this :::
First open Voice Dialer...say "Open apns"...select it.
Add the information...capitalization matters...
Click: save,,, then
Click: Yemen Mobile
SORY CYANOGENMOD 10.1
MR: BBRAD ISAY
WHY 3G(EVEDO) NOT WORK IN MY COUNTRY YEMEN BUT WHEN CHANGE ROMSTHE 3G (EVEDO) IS WORK GOOD.
WHERES THE PROBLEM IN THIS CYANOGENMOD
MR:hhp_211
ICANT UNDERSTAND THIS Add the information...capitalization matters
THE APN FOR MY COUNTRY IS:
<apn carrier="yemen mobile" numeric="42103" mcc="421" mnc="03" apn="#777" user="ymobile" server="" password="ymobile" proxy="" port="" mmsproxy="" mmsport="" mmsprotocol="null" mmsc="" type="" />
CAN ANY PERSON MACK FOR ME APN-CONF.XML FOR PUT IN MY PHONE
HELP ME PLZ IAM TIRED
any person help me
fawzisaeed said:
any person help me
Click to expand...
Click to collapse
View attachment apns-conf.xml.txt
here is a basic file for you.
it may or may not work properly, but I figured you can try it.
you will need to change the name of the file to read only
apns-conf.xml
and not
apns-conf.xml.txt
.
thanks but not work
can eny roms support arabic language like cyanogenmod?
fawzisaeed said:
thanks but not work
can eny roms support arabic language like cyanogenmod?
Click to expand...
Click to collapse
Dude no offense to your language but please use Google translate we don't understand what your asking speak it in English if you want 3g use the apns hpp gave you there's nothing more we can do we gave you everything to get your 3g working
Sent from my SCH-I500 using Tapatalk 2
I want to run the Internet in either 3G mobile or any other Internet
Internet in the official English version Ergonomics I was in this versionrom(cyanogenmod10.1) does not function at all
I hope that the idea has arrived
Did anyone find the help in any way
Thank you in advance
fawzisaeed said:
I want to run the Internet in either 3G mobile or any other Internet
Internet in the official English version Ergonomics I was in this versionrom(cyanogenmod10.1) does not function at all
I hope that the idea has arrived
Did anyone find the help in any way
Thank you in advance
Click to expand...
Click to collapse
Did you try hpps apns?
Sent from my SCH-I500 using Tapatalk 2
yes iam try more time but not work

[Q] iGo Primo & Loquendo TTS for Android

Hello,
There are way too many versions of iGo all over the internet and I have tried several ones. It looks like iGo folder structure is shared across many platforms and the .apk for Android is the one that manages its interactions with the OS.
I managed to get iGo and LoquendoTTS (v7, I guess) installed on my phone and they both seems to work fine, except for one problem. Whatever language/voice I select inside iGo has no effect to the TextToSpeach engine. In other words, it will ALWAYS get the system default language/voice. Why is that?
Let me be more specific: I want my phone language to be set to English, but I need iGo use the TTS engine in Brazilian Portuguese. If I set phone language to English, then I enter iGo and choose a Portuguese voice, the TTS sound will be spoken in Portuguese words, but with English pronounciation and voice. On the other hand, if I choose Portuguese in Android's settings then Portuguese in iGo, everything is spoken in Portuguese.
It seems to be an iGo problem, not Android's. Every other app I have that uses TTS will allow me to select the language/voice to be used, except for iGo.
I found out a few things:
1) Loquendo installs its language/voice settings to its default folder (usually /sdcard/LoquendoTTS/) and here is an example:
Portuguese.ttsconf
(Loquendo TTS Language - Brazilian Portuguese)
<?xml version="1.0" encoding="UTF-8"?>
<config>
<languages>
<language name="PortugueseBr" basename="Portuguese" defaultvariant="no">
<library name="LTTS7${basename}" entrypoint="${name}" />
<info description="${basename}" />
<resources path="modules/${basename}">
<resource class="base" type="lexicalinfo" name="${name}" />
<resource class="base" type="lexicon" name="${name}" />
</resources>
<languagealiases>
<alias type="internal" name="${name}" />
<alias type="IETF" name="pt-BR" />
<alias type="WinLangid" name="1046" />
<alias type="generic" name="BR" />
<alias type="generic" name="Brazilian" />
<alias type="generic" name="pt" />
</languagealiases>
<modes>
<mode name="default">
<parameters />
<resources>
<remove class="" type="" name="" />
<add class="base" type="" name="" />
</resources>
</mode>
</modes>
</language>
</languages>
</config>
Click to expand...
Click to collapse
Gabriela.ttsconf
(Loquendo TTS VOICE configuration: Gabriela - Brazilian Portuguese)
<?xml version="1.0" encoding="UTF-8"?>
<config>
<voices>
<voice name="Gabriela" mothertongue="PortugueseBr">
<library name="LTTS7${name}" entrypoint="${name}" />
<info description="Brazilian female voice" age="35" gender="female" demosentence="Meu nome é Gabriela: sou uma voz feminina de Loquendo, e a minha língua nativa é o português do Brasil." basepitch="180" basespeed="128" />
<resources path="modules/${name}">
<resource class="base" type="vocaldb" name="${name}">
<flavour codec="LTTS7CodecMsx" frequency="16000" bitrate="32800" rank="10" name="${parent.name}.${this.frequency}.${this.codec}.${this.bitrate}.${this.rank}.bin" />
</resource>
<resource class="gilded" type="vocaldb" name="${name}GildedPhrases">
<flavour codec="LTTS7CodecMsx" frequency="16000" bitrate="32800" rank="10" name="${parent.name}.${this.frequency}.${this.codec}.${this.bitrate}.${this.rank}.bin" />
</resource>
<resource class="gilded" type="vocaldb" name="${name}GildedParalinguistics">
<flavour codec="LTTS7CodecMsx" frequency="16000" bitrate="32800" rank="10" name="${parent.name}.${this.frequency}.${this.codec}.${this.bitrate}.${this.rank}.bin" />
</resource>
</resources>
<modes>
<mode name="default">
<parameters />
<resources>
<remove class="" type="" name="" />
<add class="base" type="" name="" />
<add class="gilded" type="" name="" />
</resources>
</mode>
</modes>
<languagealiases>
<alias type="internal" name="${mothertongue}" />
<alias type="IETF" name="pt-BR" />
<alias type="WinLangid" name="1046" />
<alias type="generic" name="BR" />
<alias type="generic" name="Brazilian" />
<alias type="generic" name="pt" />
</languagealiases>
</voice>
</voices>
</config>
Click to expand...
Click to collapse
2) iGo Voice files is specific for each language and is a .zip file containing some dictionaries, icons and also an info file like this:
info.ini
(iGo Brazilian Portuguese Voice)
[INFO]
;TTS Loquendo Lua Pro
LCID=0x0416
ask_recalulate="Fora da rota. Recalcular?"
asr_language="pt-br"
brand="Standard"
cmlangkey="Voice_Portuguese-br"
;dynamiccompressor=1
entering_tunnel="Você está entrando num túnel!"
flag="flag_bra.bmp"
flag_icon="countryflag_bra"
gps_disconnect="O GPS foi desconectado"
gps_signal_lost="Perda do sinal de Satélite"
languagekey="Portuguese"
languagename="Portuguese"
lang_extention_flag=""
luavoice=1
name="Gabriela (TTS) v2.9"
offroute="Fora da rota"
overspeed="Você está acima do limite de velocidade"
phoneme_lang="POR"
recalulate="Novo cálculo da rota"
;roadnameparsing=0
sex="female"
testsound="Olá, meu nome é Gabriela, tenha uma boa viagem, e dirija com cuidado!"
timestamp="1262873210"
timestamp_readable="2010_01_07__15_06_50"
tmcsup=1
tts_destnames=1
tts_engine="loquendo"
tts_eta="Você chegará ao destino aas \number=time %H e %M"
tts_langname="PortugueseBr"
;tts_langname_loq7="PortugueseBr"
tts_mode_mixed=0
tts_rate=50
tts_srate="11025"
tts_voicename="Gabriela"
;tts_voicename_loq7="Gabriela"
ttsvoice=1
traffic_jam="Há um congestionamento logo adiante!"
unitssup_kmm=1
unitssup_mlf=1
unitssup_mly=1
version=1
voicekey="Gabriela"
Click to expand...
Click to collapse
As you can see, iGo voice file has redundant settings to tell the system which language/voice to use.
The thing is: I tried a lot of combinations to these settings, but none got to work. I wonder why.
My only guess was to assume that these settings are specific iGo For WinCE, not for Android. As for I've heard WinCE comes with a loq_tts subfolder with some .dll and .exe files to make the LoquendoTTS engine to work.
Is anyone capable of giving me some directions on this? I am totally lost.
Thanks in advance.

[Q] Adding APN settings to ROM

How would I go about adding a different companies APN settings to a ROM so that it can be autodetected? Or maybe make a flashable zip?
dementio said:
How would I go about adding a different companies APN settings to a ROM so that it can be autodetected? Or maybe make a flashable zip?
Click to expand...
Click to collapse
add a file named apns-conf.xml in /system/etc and add data according to this file http://pastebin.com/cY5vE7ji.
apn will be automatically selected as per carrier's mcc and mnc code
I found the settings for the carriers in Afghanistan, Kuwait, and Qatar if anyone else needs them.
Code:
<apn carrier="Roshan" mcc="412" mnc="20" apn="internet" user="gprs" password="roshan" type="default" />
<apn carrier="Roshan MMS" mcc="412" mnc="20" apn="mms" mmsc="http://mms.roshan.af" mmsproxy="172.31.37.16" mmsport="8080" type="mms" />
<apn carrier="Etisalat" mcc="412" mnc="50" apn="etisalat.af.wap" proxy="10.0.0.172" port="80" type="GPRS" />
<apn carrier="Etisalat MMS" mcc="412" mnc="50" apn="etisalat.af.mms" proxy="10.0.0.172" port="80" type="MMS" />
<apn carrier="AWCC" mcc="412" mnc="1" apn="internet" type="default" />
<apn carrier="AWCC MMS" mcc="412" mnc="1" apn="mms1" mmsc="http://172.17.81.2:8002" mmsproxy="172.17.81.2" mmsport="8002" type="default" />
<apn carrier="Q-tel MMS" mcc="427" mnc="01" apn="mms.qtel" user="mms" password="gprs" mmsc="http://mmsr.qtelmma.qa" mmsproxy="10.23.8.3" mmsport="9201" type="mms" />
<apn carrier="Q-tel" mcc="427" mnc="01" apn="web.qtel" user="gprs" password="gprs" type="default,supl" />
<apn carrier="Vodafone QA MMS" mcc="427" mnc="02" apn="vodafone.com.qa" mmsc="http://mms.vodafone.com.qa/mmsc" mmsproxy="10.101.97.102" mmsport="80" type="mms" />
<apn carrier="Vodafone QA" mcc="427" mnc="02" apn="web.vodafone.com.qa" type="default,supl" />
<apn carrier="Zain KW" mcc="419" mnc="02" apn="pps" user="pps" password="pps" type="default,supl" />
<apn carrier="Zain KW MMS" mcc="419" mnc="02" apn="pps" user="mms" password="mms" mmsc="http://mms.zain" mmsproxy="176.0.0.65" mmsport="8080" type="mms" />
<apn carrier="Viva KW" mcc="419" mnc="04" apn="viva" type="default,supl" />
<apn carrier="Viva KW MMS" mcc="419" mnc="04" apn="viva" mmsc="http://172.16.128.80:38090/was" mmsproxy="172.16.128.228" mmsport="8080" type="mms" />
<apn carrier="MTC Vodafone KW" mcc="419" mnc="2" apn="apn01" type="default,supl" />
<apn carrier="MTC Vodafone KW MMS" mcc="419" mnc="2" apn="mms" user="annyway" password="online" mmsc="http://176.000.000.021" mmsproxy="176.0.0.65" mmsport="8080" type="mms" />
<apn carrier="Wataniya" mcc="419" mnc="3" apn="action.wataniya.com" type="default,supl" />
<apn carrier="Wataniya MMS" mcc="419" mnc="3" apn="mms.wataniya.com" mmsc="http://action.wataniya.com" mmsproxy="194.126.053.064" mmsport="8080" type="mms" />
HELP!!!
Hello, I am currently in Afghanistan trying to get Roshan Data working on my Unlocked, Rooted, T-Mobile Samsung Galaxy S4. I have been looking everywhere to find out how to do this. Some posts lead me to believe I have a hidden T-Mobile APNS in my phone that I can't delete which is affecting the ROSHAN APNS. It looks like that you figured it out to me. Please lead me in the right direction. Yes I am a noob to this stuff, but I would really appreciate any help.
Open /etc/apns-conf.xml (root required) and add the lines from my prior post. Or, attach your current one, and I can make you a flashable zip
Sent from my SCH-I545 using Tapatalk now Free
XML editor that will work?
Hello again and thank you for your quick response. So I downloaded a root browser and found the apns-conf.xml file. I used the Axel App to open it up and tried several times to add the new lines. After saving with Axel the file has issues opening up again. The current apns-conf.xml file is a read only, so I am having to open and save as then add lines, but again, I am trying to find an app that will do this successfully. Thank you again for bringing me closer to my goal.
I managed to add the APNS for Roshan using 920 Text Editor to the apns-conf.xml file. But still no data.
APN flashable zip
Please
I have attached required APN config file Kindly provide flashable Zip.
I tried to copy via OI file manager but I cannot as it does not shows respective folder after selecting copy function.
Regards
Sagar
Flashable Zip
Hello Again, so this flashable zip that you can provide with have the correct settings? I may have to ask you how to correctly use it on my phone. I have a buddy that says he could flash my phone if need be, but I am trying to avoid that if I can.
Thanks.
APN flashing
dementio said:
Open /etc/apns-conf.xml (root required) and add the lines from my prior post. Or, attach your current one, and I can make you a flashable zip
Sent from my SCH-I545 using Tapatalk now Free
Click to expand...
Click to collapse
I had attached my required file apns-conf yesterday for flashable zip .I m from India .
Today i managed to copy the file with root explorer app in required folder as mentioned above but yet I do not have Network Data connection.
My phone is unable to register to Network .Call/SMS is working fine
1. Do I have to flash in CWM mode???? If yes kindly provide flashable file which is attached in yesterdays post .
2. Is there any other method or any other file to be replaced/flashed kindly let us know.
3. Which files control/ manage Network Data Connection
Flashable Zip
dementio said:
Open /etc/apns-conf.xml (root required) and add the lines from my prior post. Or, attach your current one, and I can make you a flashable zip
Please make me a flashable zip with Roshan settings I have yet to get my 3g working. Thanks.
Click to expand...
Click to collapse

Categories

Resources