[Q] how to update to R2BA026 - XPERIA X10 Android Development

currently i'm using R2BA020, heard that R2BA026 have improvement in battery life and became more resposive in timescape and mediascape. How do i go about updating to R2BA026? Can someone give me detailed steps? Thanks in advance

hey,
http://forum.xda-developers.com/showthread.php?t=683793
(thanks to jerpelea)
and to root it:
http://forum.xda-developers.com/showthread.php?t=740240
(Thanks to all the devs who have worked so hard for us!)
or use SEUS

I've tried that already but to no avail.
It came out like this:
please connect Xperia in flash mode.
Press any key to continue . . .
Sep 3, 2010 9:21:52 PM X10flash main
INFO: start
java.io.IOException: Unable to open channel, GetLastError=0
at com.sonyericsson.cs.usbflashnative.impl.USBFlashNativeImpl.openChanne
l(Native Method)
at X10flash.main(X10flash.java:410)
Exception in thread "main" java.lang.NullPointerException
at java.lang.String.<init>(Unknown Source)
at X10flash.testPluged(X10flash.java:103)
at X10flash.run(X10flash.java:375)
at X10flash.main(X10flash.java:417)
Press any key to continue . . .
Wonder what went wrong.

you didn't get the device id correct... Try again with another one. I would suggest using SEUS and using the one click root if you don't get the divece id right.

How do i get the device id? i used the x10root but did not manage to see any deviceID

[email protected] said:
How do i get the device id? i used the x10root but did not manage to see any deviceID
Click to expand...
Click to collapse
You have to make a decision, either you use the "5 step root" OR the "One Click Root".
Using the One click Root method requires no knowledge of the device id.
Just use Sony Ericsson Update Service (SEUS) and update your phone to the latest and greatest, and then run the x10root.apk to get rooted.
That's it !

Okay, Thanks. I got everything working.
Glad to have helpful people in this forum

I have the 020 on the x10a, and update service still says its up to date. Anyone got the x10a to 026? If so, how did you do it?

SGK128 said:
I have the 020 on the x10a, and update service still says its up to date. Anyone got the x10a to 026? If so, how did you do it?
Click to expand...
Click to collapse
were u from,, same happend to me but i redownload SEUS and run the update service and then it work fine

My x10a was on r2ba016 and was saying it was up to date. I used original root method as it debrands phone aswell as updating and rooting. Currently running 026
Sent from my X10a using XDA App

i already rooted my phone. anyone know how to update to 026? I dont see the roms in decrytd rom

Just follow instructions in the root package, it doesn't matter if you are already rooted. It's the best way I can think of
Sent from my X10a using XDA App

So, when I have a branded Vodafone X10, Dutch 024 and I only want to debrand it, I could do the root-apk and then it is debranded as well? So then I can run SEUS and update it to 026?

NightSidew1nd3r said:
Just follow instructions in the root package, it doesn't matter if you are already rooted. It's the best way I can think of
Sent from my X10a using XDA App
Click to expand...
Click to collapse
What "package" are you talking about? How do we access the control prompt screen?

No one can answer my question?

NightSidew1nd3r said:
My x10a was on r2ba016 and was saying it was up to date. I used original root method as it debrands phone aswell as updating and rooting. Currently running 026
Sent from my X10a using XDA App
Click to expand...
Click to collapse
Ive a similar problem to the others here.
Im Vodafone Ireland branded and still on 014.
Whats the easiest and best method to not end up with a brick for debranding??
Nightsidewinder--What method did you use to debrand??
Thanks in advance.
Richie.

it you want to update to Generic_R2BA026
go here
http://forum.xda-developers.com/showthread.php?t=683793
and download Generic_R2BA026 and Flash Tool (can unbrick X10i with provided files)
intructions:
1.unpack both .zip folders (i_R2BA026 & X10FUB) and copy all files R2BA026 folder to X10FUB folder (flash app folder)
2.follow the instructions from flash folder
2.1.) Open regedit and press Ctrl+F to open search window:
Search for "USB\Vid_0fce&Pid_adde\"
You will find the "DeviceInstance" should look like this :
"USB\Vid_0fce&Pid_adde\1&23cfa456&7&8"
copy the last part "1&23cfa456&7&8" into the DeviceID.txt file. Don't paste any free lines/blocks before or after!
2.2.) Start X10flash.bat in X10FUB folder
2.3.) Connect X10 in flash Mode:
a) Power down
b) Hold "back" Key
c) connect USB cradle on PC
If the LED is green everything is good!
2.4.) Press ENTER
To Root go here
http://forum.xda-developers.com/showthread.php?t=740240
and download Standalone X10 root.apk v. 1.06
install X10 root.apk and click Root!
That is all...
Hope this helps

SalThach said:
Open regedit and press Ctrl+F to open search window:
Search for "USB\Vid_0fce&Pid_adde\"
You will find the "DeviceInstance" should look like this :
"USB\Vid_0fce&Pid_adde\1&23cfa456&7&8"
copy the last part "1&23cfa456&7&8" into the DeviceID.txt file. Don't paste any free lines/blocks before or after!
Click to expand...
Click to collapse
Cheers for the guide Salthach.Having one small problem though.Total noob question!!!
Do I have to have the phone connected before I search the registry for the key above??Ive tried it without the phone connected and the search comes up with nothing found.
Also I got my x10 unlocked with a network unlocking code--Will the X10 still be unlocked when I debrand??
Thanks
Richie

razer_irl said:
Cheers for the guide Salthach.Having one small problem though.Total noob question!!!
Do I have to have the phone connected before I search the registry for the key above??Ive tried it without the phone connected and the search comes up with nothing found.
Also I got my x10 unlocked with a network unlocking code--Will the X10 still be unlocked when I debrand??
Thanks
Richie
Click to expand...
Click to collapse
My question is the same!!

TrietHocNhanSinh said:
My question is the same!!
Click to expand...
Click to collapse
1. connect your Device but do not mount SD card
2. Open regedit and press Ctrl+F to open search window:
Search for "USB\Vid_0fce&Pid_adde\"
or
download this it will help you find DeviceID
http://rapidshare.com/files/404363083/i_R1FA16_ft.rar.html
Thanks to Synlar
2. Unrar i_R1FA16_ft.rar
3. Open the DeviceID.jar in 1st folder
this should give you 2 Device ID. try one, if dosen't work, try another.

Related

pls help to unlock my vibrant

hello everyone, i'm a newbie i bought a second hand t959 vibrant that is sim locked to t-mobile. I have tryed to follow many guides, the one with Generate Unlock in particular but I have the problem that when I connect the mobile to the pc, in the mobile memory there isn't the efs folder so when I execute the generator program i have an error as many user of this forums.. anyone can help me to resolve my problem? on the mobile i have 2.1 android firmware ji6 many thx
last night i tryied to flash the phone with firmware E8 posted in a thread on this forum and then try to made the code generator but without success any ideas?
dazan said:
last night i tryied to flash the phone with firmware E8 posted in a thread on this forum and then try to made the code generator but without success any ideas?
Click to expand...
Click to collapse
try the instructions found Here at the top click captivate and vibrant instructions or just go here
if you have a root file browser such as root explorer (Not the file browser that comes with the vibrant) you can look for your efs folder using that app. (it should be in the root directory that opens up when you open your file browser /efs )
you can also use ADB to pull the efs folder.
adb pull /efs
or if you just want the nv_data.bin file:
adb pull /efs/nv_data.bin
if you need to see whats in it or back it up (which I recommend strongly weather you do it with a root browser or ADB)
Hello, i followed the exact instructions as said on this link:
http://forum.xda-developers.com/showthread.php?t=761408
I had tried the one click unlock method prior to this one and it showed file not found so i moved to this long method. I did everything properly but basically when i open sgux.exe to read my nv_data.bin that is in c:\ this is what shows up.
"
SGUX v0.91b (C) 2010 By Mark0 & rbnet
Samsung Galaxy Unlock code eXtractor
(based on a tip posted by rhcp0112345)
Opening file <nv_data.bin>...
Searching code block...
Found.
Searching code...
C:\
"
So basically it says that it found the code but it does not even display the number. I actually opened the nv_data.bin file using a hex editor and i can see that there is some sort of data in there (this probably means that my code is in there) but i dont know why this sgux.exe can not read it.
Can somebody please help!
One thing i should mention is that this phone i recently bought and it came with firmware "t959uvji6" i tried to use the one step unlock method here and failed then realized i should downgrade to "t959uvjfd" and i followed the instructions of of the xda website doing this using odin with both the pda and the pit file. So everything worked. Then i tried one click method again and it didnt work. so i tried the long method and i have shown the results above!!
Please help!
Thanks
I have the samsung galaxy s from tmobile. t959.
haider3 said:
Hello, i followed the exact instructions as said on this link:
http://forum.xda-developers.com/showthread.php?t=761408
I had tried the one click unlock method prior to this one and it showed file not found so i moved to this long method. I did everything properly but basically when i open sgux.exe to read my nv_data.bin that is in c:\ this is what shows up.
"
SGUX v0.91b (C) 2010 By Mark0 & rbnet
Samsung Galaxy Unlock code eXtractor
(based on a tip posted by rhcp0112345)
Opening file <nv_data.bin>...
Searching code block...
Found.
Searching code...
C:\
"
So basically it says that it found the code but it does not even display the number. I actually opened the nv_data.bin file using a hex editor and i can see that there is some sort of data in there (this probably means that my code is in there) but i dont know why this sgux.exe can not read it.
Can somebody please help!
One thing i should mention is that this phone i recently bought and it came with firmware "t959uvji6" i tried to use the one step unlock method here and failed then realized i should downgrade to "t959uvjfd" and i followed the instructions of of the xda website doing this using odin with both the pda and the pit file. So everything worked. Then i tried one click method again and it didnt work. so i tried the long method and i have shown the results above!!
Please help!
Thanks
I have the samsung galaxy s from tmobile. t959.
Click to expand...
Click to collapse
As far as I know the one click method will never work after having JI6 on your phone, you'll have to do it the long way.
if that link I sent you wont work, there is another thing to try, but its pretty complicated. heres my guide for the last person that asked this...
although most people have better luck doing it with that site I sent you to.
Dial *#7465256# and if it all says off then your phones already unlocked so ignore the rest of this.
Follow these instructions to unlock (specificaly by helroz, if you need to, read ahead and see what problems other people have had though)
dial *#7465256# in the dialer (as soon as you hit the last # it should work)
make sure everything says off (this means your unlocked)
EDIT: Make sure you have ADB (Android Debug Bridge) installed on your computer before running the script.
Also make sure that you have USB debugging checked by hitting (from the home screen) Menu >> Settings >> Applications >> Development >> USB Debugging
You can download and install the Android SDK (Software Development Kit) by following the instructions here
This will also install ADB.
another good idea is to make a backup of your efs file (I beleive this is in the instructions for running the script, but I thought I should say it again)
just in case something goes wrong.
this file is located in : the root of your data partition if I remember correctly, it should be labeled "efs"
you can use a root file manager (I use root explorer but it is a paid app) or you can use ADB to pull it.
you may want to download the drivers for your phone as well, if you haven't already that is.
you can get them here
thx for all reply tomorrow i'll try to follow your instruction and then let you know
hello i have tryied again with root explorer and and generator unlocker now seems to find the file but as you can see in the file attached let me know that found the code but don't display
firefly6240 said:
As far as I know the one click method will never work after having JI6 on your phone, you'll have to do it the long way.
if that link I sent you wont work, there is another thing to try, but its pretty complicated. heres my guide for the last person that asked this...
although most people have better luck doing it with that site I sent you to.
Dial *#7465256# and if it all says off then your phones already unlocked so ignore the rest of this.
Follow these instructions to unlock (specificaly by helroz, if you need to, read ahead and see what problems other people have had though)
dial *#7465256# in the dialer (as soon as you hit the last # it should work)
make sure everything says off (this means your unlocked)
EDIT: Make sure you have ADB (Android Debug Bridge) installed on your computer before running the script.
Also make sure that you have USB debugging checked by hitting (from the home screen) Menu >> Settings >> Applications >> Development >> USB Debugging
You can download and install the Android SDK (Software Development Kit) by following the instructions here
This will also install ADB.
another good idea is to make a backup of your efs file (I beleive this is in the instructions for running the script, but I thought I should say it again)
just in case something goes wrong.
this file is located in : the root of your data partition if I remember correctly, it should be labeled "efs"
you can use a root file manager (I use root explorer but it is a paid app) or you can use ADB to pull it.
you may want to download the drivers for your phone as well, if you haven't already that is.
you can get them here
Click to expand...
Click to collapse
Hi thank you for taking the time to answer, i will do this right after im done with my exams. Just wanted to ask one thing. You said the code was "*#7465256#", but this doesnt show anything when i press#. I think you meant to say was "*#7465625# works!" Please correct me if i am wrong! Thank you!
Actually i couldnt wait and did this right away!
just wanted to let u know, i succesffully unlocked this phone. Thanks alot to "firefly6240". I flashed to T959UVJI6 using:
http://forum.xda-developers.com/showthread.php?t=798125
Then rooted phone using:
http://forum.xda-developers.com/showthread.php?t=723479
Then followed these instructions (by helroz):
http://forum.xda-developers.com/showthread.php?t=822008&page=11#
This link will also help to get any confusions out but i didnt use it:
http://forum.xda-developers.com/showthread.php?t=831569
hi guys finally i have unlocked the phone thx to all...
i have re-generate nv_data with program repair and after magically the phone unlocked to anynetworks... i'm so happy
Upgrading to froyo
hey guys is the jk6 firmware stable enough for me to try out. Does it have any major bugs. Also, is it possible for me to upgrade to froyo after doing this unlock method on the JI6.
Like would my phone become locked again if i upgrade to froyo or did this method unlock my phone forever? Please let me know! thnx

Unlocking bootloarder for x10/x8/x10mini/x10minipro

Dear all i've found a tool while searching the net to unlock permanently the bootloader of our phones in few clicks and all the following series are supported according to the site
X10 /mini/pro/x8
Xperia X10 Mini - E10i
Xperia X10 Mini Pro - U20
Xperia X8 - E15i
Xperia W8 - E16 - E16i
below is a link to download and test this utility:
multiunlockclient_install.exe
the following link is the original site for this tool :http://www.x10unlocked.com/
hope this will be good for all of us
if this tool works fine for you please press the thanks button
I'm pretty sure this isn't a tool to unlock our bootloaders.
It's a SIM unlock tool, and you have to pay for credits to use it.
nope @coversnail i tried it and it worked and recognized my phone i only had to install this utility on a pc without antivirus as this utility depend on s1tool as i saw from the antivirus on this machine i'm working which caught s1tool as trojan.Gen
Sorry minachvim, but it isn't a one click bootloader unlocker, it definitely is a SIM unlock tool. This is the site that owns it:
http://www.store4unlock.com/blog/3/SonyEricsson-Xperia-JIC-Unlock-Client-www-x10unlocked-com.html
and you do have to pay to use it:
1 LOG (Credit) = 1 Unlock
To order, please log to your Store4unlock account, go to “Server Service” section and in the drop down menu the tool/service “ SonyEricsson Xperia JIC Unlock Client (www.x10unlocked.com)” (1 LOG = 40 USD).
Click to expand...
Click to collapse
coversnail said:
Sorry minachvim, but it isn't a one click bootloader unlocker, it definitely is a SIM unlock tool. This is the site that owns it:
http://www.store4unlock.com/blog/3/SonyEricsson-Xperia-JIC-Unlock-Client-www-x10unlocked-com.html
and you do have to pay to use it:
Click to expand...
Click to collapse
@coversnail
check the below is taken from the official site of the tool
Troubleshooting section:
Error Invalid file:
Possible causes:
1. On Vista or Windows 7 32/64 byte OS, client must be run as administrator (right click on shortcut, select "run as administrator")
2. Firewall or Antivirus is deleting files in the “loaders” folder. Uninstall software turn off antivirus and reinstall.
Phone unlocked but no service:
1.Run software again and start from stage 4 (put phone in boot mode and proceed).
Ignore “account has zero credits” message.You can unlock the same phone as many times as you wish
Software hangs while unlocking or detecting ADB device
Antivirus has deleted important files. Uninstall software.Turn off Antivirus .Download and install software again
Else if you are right then i really apology for posting something that i thought may help but it didn't! but i believe it should work.
And I am sorry if I am wrong! It just seems rather odd to me that they don't use the word 'bootloader' anywhere on their website!
coversnail said:
And I am sorry if I am wrong! It just seems rather odd to me that they don't use the word 'bootloader' anywhere on their website!
Click to expand...
Click to collapse
well i found u20 loader.sin inside there installation folder which means they unlock bootloader... again if i'm wrong i'm sorry it's only a try to help...
I think it is a sim unlock tool as well, as it wants credits to unlock. Why would we pay? If we can do it for free. I know your only trying to help and so am I.
Sent from my U20i using xda premium
Well thank you all for checking it too I believe it can unlock bootloader for free but to unlock sim it takes credit...
Sent from my U20i using XDA App
Let's close this for now until I develop something similar to unlock bootloader in one click and post it
Sent from my U20i using XDA App
Has anyone tried it? Unlock the bootloader or the sim?
Sim if you pay for credits.
Sent from my U20i using xda premium

[Q] How To Root Xperia U / ST25i

I bought my new Xperia U . Please Some one Tell me how to unlock bootloader & Root the Device Please Post Video / Screen Shots
=-Step bY Step-=
Thank You !!!​
rakeshnofear said:
I bought my new Xperia U . Please Some one Tell me how to unlock bootloader & Root the Device Please Post Video / Screen Shots
=-Step bY Step-=
Thank You !!!​
Click to expand...
Click to collapse
Plese search the forum.
Unlocking and rooting of X- U/P/s has already been explained many times in detail..
rakeshnofear said:
I bought my new Xperia U . Please Some one Tell me how to unlock bootloader & Root the Device Please Post Video / Screen Shots
=-Step bY Step-=
Thank You !!!​
Click to expand...
Click to collapse
Xperia U / S / P Bootloader unlocking
http://forum.xda-developers.com/showthread.php?t=1527159
Tested and perfectly working on my Xperia U
Simply select advanced tab from flashtool and root then select zergrush easiest way
I got a message saying MTP is enabled and cant root
alankstiyo said:
I got a message saying MTP is enabled and cant root
Click to expand...
Click to collapse
Flash any of the custom kernels to get root
Sent from my ST25i using Tapatalk 2
plzzzz help
Friends,i am new here and xperia u is my first android device..i know its a bit too much to ask but if anyone can please post a detailed step by step procedure for rooting xperia u..that would be really helpful for many others like me..i have already googled it so many times but still no luck with a perfect tutorial..also,the method suggested above to root by flashtools does not work..hope to see a reply from senior members and moderators soon..regards..
reply on how to unlock bootloader
xperiavish said:
Friends,i am new here and xperia u is my first android device..i know its a bit too much to ask but if anyone can please post a detailed step by step procedure for rooting xperia u..that would be really helpful for many others like me..i have already googled it so many times but still no luck with a perfect tutorial..also,the method suggested above to root by flashtools does not work..hope to see a reply from senior members and moderators soon..regards..
Click to expand...
Click to collapse
Number1) unlock bootloader, it is free and official from unlockbootloader.sonymobile.com
number 2) download flashtool, find it urself......
number3) Once clicked, you will then get a pop up where it will read “Are you really sure?”, click on “Yes, I’m sure” and there you go, you now need to open the command prompt in your computer. Dial *#06# in your phone to get the IMEI number. Note it down at the safe place as it may be required at a later stage.
•Connect your phone to the computer and then in the command prompt (shift+ right click in fastboot folder under "system c:/flashtoo"l, you now need to enter in the below mentioned command.
number 4)type this in "fastboot -i 0x0fce oem unlock 0Xkey", replace key with the key u obtained from the site
number5)“” •Ensure that the KEY which you have replaced with the IMEI is the correct IMEI number. After entering the above command in the command prompt, you need to then follow the on screen instructions so as to unlock the boot loader.
Congratulations, you have now successfully unlocked the boot loader of your device. Do let us know just in case if you need any assistance in the comments section as we will ensure that all your issues are sorted out at the earliest.
if u want to relock, search google again, google is not a "super dificult" search engine to use. hope it helps u
works?
works in 2.55 ics???
khoojunxiang said:
Number1) unlock bootloader, it is free and official from unlockbootloader.sonymobile.com
number 2) download flashtool, find it urself......
number3) Once clicked, you will then get a pop up where it will read “Are you really sure?”, click on “Yes, I’m sure” and there you go, you now need to open the command prompt in your computer. Dial *#06# in your phone to get the IMEI number. Note it down at the safe place as it may be required at a later stage.
•Connect your phone to the computer and then in the command prompt (shift+ right click in fastboot folder under "system c:/flashtoo"l, you now need to enter in the below mentioned command.
number 4)type this in "fastboot -i 0x0fce oem unlock 0Xkey", replace key with the key u obtained from the site
number5)“” •Ensure that the KEY which you have replaced with the IMEI is the correct IMEI number. After entering the above command in the command prompt, you need to then follow the on screen instructions so as to unlock the boot loader.
Congratulations, you have now successfully unlocked the boot loader of your device. Do let us know just in case if you need any assistance in the comments section as we will ensure that all your issues are sorted out at the earliest.
if u want to relock, search google again, google is not a "super dificult" search engine to use. hope it helps u
Click to expand...
Click to collapse
correct! If you want to acces root you now have to download http://forum.xda-developers.com/xpe...de-root-cwm-unlock-bootloader-custom-t2403929 that and run the runme.bat file. Connect your phone and you should be running ICS 4.0.4. I had the 89 when I rooted. Enable usb debugging, you can search on how to do that and after that you connect your device to your pc and click 1 on the runme.bat file and hit enter. Wait for the magic and if you are stuck at ''if succes i will tell you'' part, wich I was. Just unplug your phone, reboot and go to your appdrawer and find the ''make a copy and restore'' app and click on find a copy and click on ''root'' (something like that) and after that click restore. Reboot and then download kingroot, the latest is recommended. And roooooooot . After that you may want to replace the kingroot root authorizer with super su. This is optional but I recommend it. Follow http://androidmtk.com/replace-kinguser-with-supersu that tutorial and you should be good to go!
Well this thread is extremely old so I suppose it should be closed.

[Q] [q] big problem with x10 :(

Hi After trying to unlock very many failed bootloader I've seen what in fact if I falter my Mobile on the 2.1 version go there I've read ...
So I downloaded a 2.1 firmare and it gestock with the Flash tool and now when I turn my mobile on I come to the PIN entry further, that it is not even used in the introductory menu where one language ect. can select ....
Then I took Seus & PC Companion and it resets .... But after the reset still does the same after PIN entry goes not just continue although I can pull down the menu bar, but more is not I see just only the background image and the bar at the top but nothing more I can not help Need urgent help.... Sorry for my bad English :S But i need Help Hope you can help
have you tried to remove your simcard?
1. remove your simcard
2. try to boot your device
3. if the problem still exists, reflash your phone...
Phone flashing guide for xperia x10
Flashtool guide from G-FACE
[25NOV][FLASHTOOL GUIDE] HOW TO for n00bies - G-FACE GUIDE
ROM Collection by THeLogiC
[Completed]X10 Stock Firmware Collection
Have a nice day!
Ehm.... Thanx
Now, works but my card is locked and i haven´t service :S
rec0rdzz said:
Ehm.... Thanx
Now, works but my card is locked and i haven´t service :S
Click to expand...
Click to collapse
Renew your simcard at your telecommunication service center

[Q] unlock bootloader on bricked state

guys I just wanna ask if its possible to unlock the bootloader on my xperia ray using testpoint method in bricked state?
my phone is stuck on sony logo and wont boot. I've tried everything from flashing official stock .42 and .62 rom, s1 restore, update using SEUS and repaired using PC Companion but it's still stuck on sony logo. I'm running out of options here. Please share your thoughts and opinions I'd appreciate it, thanks
Are you flashing the right ftfs?
I KNOW that u can unlock via official method in bicked state. Don't know about testpoint though
Btw are you sure your flashing is right
Regards
-N
XperienceD said:
Are you flashing the right ftfs?
Click to expand...
Click to collapse
I think so.. I DLed the .42 and .62 firmwares from this link http://talk.sonymobile.com/thread/35239
I also tried the stock ICS 4.1.B.0.587 the logo changed from Sony Ericsson to Sony, still stuck on the logo though
Then I noticed something http://prntscr.com/11msuv
I flashed the stock ICS 4.1.B.0.587 and reflashed it again but the version did not changed
INFO - Current device : ST18i - BX902WWWDP - 1252-5335_R5D - 1248-9545_4.0.2.A.0.42 - WORLD-i_4.0.2.A.0.42
is this normal?
mnishamk said:
I KNOW that u can unlock via official method in bicked state. Don't know about testpoint though
Btw are you sure your flashing is right
Regards
-N
Click to expand...
Click to collapse
I followed flashing procedure carefully and downloaded official firmwares but still stuck on the sony logo
I might just try that official method and reasearch more first, btw is there some way to identify my IMEI or MEID w/o opening the dialler? I think the official method requires it and I can't get past the boot screen to open my dialler
Jake_boo said:
I followed flashing procedure carefully and downloaded official firmwares but still stuck on the sony logo
I might just try that official method and reasearch more first, btw is there some way to identify my IMEI or MEID w/o opening the dialler? I think the official method requires it and I can't get past the boot screen to open my dialler
Click to expand...
Click to collapse
Most probably your imei is stored in your google account you can access it from a pc (somewhere in gmail)
If it doesn't work, there an adb command to get imei from the device just connect device and run the command (google for it)
Regards
-N
mnishamk said:
Most probably your imei is stored in your google account you can access it from a pc (somewhere in gmail)
If it doesn't work, there an adb command to get imei from the device just connect device and run the command (google for it)
Regards
-N
Click to expand...
Click to collapse
thanks for the info :good:

Categories

Resources