[Q] [q] big problem with x10 :( - XPERIA X10 Q&A, Help & Troubleshooting

Hi After trying to unlock very many failed bootloader I've seen what in fact if I falter my Mobile on the 2.1 version go there I've read ...
So I downloaded a 2.1 firmare and it gestock with the Flash tool and now when I turn my mobile on I come to the PIN entry further, that it is not even used in the introductory menu where one language ect. can select ....
Then I took Seus & PC Companion and it resets .... But after the reset still does the same after PIN entry goes not just continue although I can pull down the menu bar, but more is not I see just only the background image and the bar at the top but nothing more I can not help Need urgent help.... Sorry for my bad English :S But i need Help Hope you can help

have you tried to remove your simcard?

1. remove your simcard
2. try to boot your device
3. if the problem still exists, reflash your phone...
Phone flashing guide for xperia x10
Flashtool guide from G-FACE
[25NOV][FLASHTOOL GUIDE] HOW TO for n00bies - G-FACE GUIDE
ROM Collection by THeLogiC
[Completed]X10 Stock Firmware Collection
Have a nice day!

Ehm.... Thanx
Now, works but my card is locked and i haven´t service :S

rec0rdzz said:
Ehm.... Thanx
Now, works but my card is locked and i haven´t service :S
Click to expand...
Click to collapse
Renew your simcard at your telecommunication service center

Related

[Q] Help required and info also...URGENT!!

Hi guys,
I got x10 i from my fri who is residing in London... Its ORANGE carrier over there!! when i started the mobile after inserting the sim, it asked for the SIM NETWORK UNLOCK CODE.
First i tried with 0000 and 12345, but didn't work out!!
So when browsed on this problem i came to know that i need to unlock it...but many sites are offering unlock codes but it around $50- - $60 ...
And many of my fri's said that i can do it for free if i do debranding or flashing!!
As i am very new to these gadgets i want to know about the terms debranding, rooting and flashing n ROM flashing!! (Which i came across after reading many threads in the forums).... Please explain me these tings or provide the links where the info is located...
Guys, Could you please clear the following questions?
1) Does debranding the mobile will unlock the phone?
2) Does flashing and rooting will unlock the mobile??
After browsing i came across the some links to debrand the mobile and i followed the following process!!
with this help i downloaded UK Generic firmware files!! i.e.,
UK Generic X10i Firmware (R2BA020) which contains 2 files 1 of near to 150MB and other of 15 MB
I did till 7th step!! i.e., deleting the files in the db folder and running SEUS and when i got files... I did back up of these new files and renamed the downloaded files (Generic firmware files) with the same name..
Then again i ran SEUS, it said that i have already the latest firmware and while downloading the files ... i replaced the files with those files above one at starting and another at the end ... then it said that Installation failed!!!
So i got worried of my mobile!! and then i checked my mobile but the am able to access my mobile.... But when i insert the sim i got the same problem SIM NETWROK UNLOCK CODE!!!
Could any one please help on this??? For the above process i spent whole half a day!! and when i visited some mobile shops its of no use... in pune!!
One shop guy asked Rs 2000/- I think it is waste!! could you please anyone help on this???
i think u should try tis
http://forum.xda-developers.com/showthread.php?t=920746&highlight=flashtool
tis is called flashing.. it means flash an entire new firmware via flashtool
download the flashtool
and download ur choice of firmware
put the downloaded firmware in to the flashtool's firmware folder
boot into safe mode and then start flashing
i assume u know how to boot into safe mode? just like how u update via SEUS. pressing the back button while switching on
rooting simply means give u, a user super permission.. however, u might lost ur warranty.. but since u bought it from ur fren, i think the warranty ended as well??
i hope this helps..
Flashing is NOT unlocking.
One of the paid services is your only option for now. There are no free options for x10 yet. There were a few threads on this already & a few guys on the forum selling unlocks too if you do a search.
Search is your friend! ^_^
Sent from my X10a using XDA App
You should be able to get a unlock code off Ebay for around $10,they will need your IEMI number. There IS NO FREE SERVICE that offers unlocking codes.

[Tutorial] Fix FOTA bricked (unlocked bootloader) Phones

Hi,
This will fix your unlocked Phones which got bricked through OTA update and are dead now!
Please download this package:
http://www.multiupload.com/Q103V01CV1 [Corrected Package; thanks blagus for finding the problem]
Let it extract to a destination of your choice.
After that run Flashtool.exe.
Now hit the button FLASH and select the package which is included.
Follow the steps and connect your phone in flashmode. This is the same mode Pc Companion and SEUS uses to flash your phone to newer firmare (Indicated by green LED), if you got BLUE LED you are in the wrong mode!
Flashtool will now detect your phone and start the repair.
After all is done your phone should be up and running again, if not please reflash with original firmware and WIPE userdata!
ADVICE:
PLEASE DO NOT ACCEPT ANY OTA'S ! If you receive a OTA message just decline, if you accept it you will end with a brick AGAIN! So please do NOT accept them until SonyEricsson provides a OTA solution for unlocked Bootloaders!
Best Regards
Team FreeXperia
does it fix the radio ?
I think it does
I'll test it tonight
Flashtool seems to have a problem, Androxyde will look this evening into the problem.
Regards
hi
thank you
fastboot working again ?
Flashing Error -----> Aborted
Unplugged the USB started the play with same result (No Radio)
baaa3 said:
Flashing Error -----> Aborted
Unplugged the USB started the play with same result (No Radio)
Click to expand...
Click to collapse
If you got Flashing Error -----> Aborted your phone won't be flashed ... so radio will not be modified ...
Did you guys not read what binary said? Flashtool has a problem flashing this package, it is prob to do with the modified trim area, the flashtool dev will look at it tonight
Sent from my R800i using Tapatalk
This should be correct preset.ta:
Code:
// [Brick fix]
02
000008FD 0002 00 00
Try with this one: http://www.mediafire.com/file/838ar7vbur358l4/Play_v1.01_TA brick fix UPDATE.ftf
After flashing, reflash phone fully with generic FW, make sure you select wipe userdata.
still no network for me
my phone is simfree
if you need, I can test for you ;-)
Updated first post!
Regards
Bin4ry
fastboot ???
hi i have xplay fix with flashtool and fatgsm, now my bootloader is relocked and fastboot not work
first post can repair my phone ?
ty
I'm not sure, you have to try.
Regards
not sure if it was supposed to fix my broken radio?
but i can say if it was supposed to it didnt work for me
thnx devs tho
well,its supposed to unbrick.but it only unbricks yout phonr full if you havent used another patch!
the other patch corrupts the simlock,i can not fix this sorry. so i advice NOT use the patch from other thread!
Regards
Sent from my LT15i using Tapatalk
Hmm, I got an idea... Vodafone phones with fastboot capability are sim-locked, and after bl unlock they're sim-unlocked too. What if we manage to enable fastboot, then re-run oem unlock to try to rebuild simlock?
1 - Flashed with the Fix
2 - Flashed with Generic UK
3 - Turned on the play and still no radio
I am getting no signal and insert sim card msg
Good Luck Guys ;/ and thanks for your effort on making this work.
Thanks guys, I know you wrote a wonderful tool to save our phone, but it still no signal and simcard not found. my arc became a "iTouch" now. only the music and wif internet.
Thanks once again
It's stated in first post, the Fix cannot only Fix your phone if you are in DEAD STATE.
If you already tryied the other trick it's too late sorry!
Now you have to use a payserver to remove simlock, there is no other way.
Regards

[Q] strange brick after unsimlock, any solution to fully reinstall stock rom?

Hello guys,
after looking here a lot for improving my x10 (successfully, I love fxp ), I have my first problem, and it is a strange one.
I live in France, and a new carrier made very cool prices, so I decided to change carrier. But my previous carrier provider made its possible to not unsimlock my x10, so, when I went in holidays in Tunisia, I went to a shop where they are known to unlock phones, and they unsimlocked it, but they put an official 2.1 rom, but I couldn't go from cyanogen to stock 2.1... So I decided to install fxp.
I rooted the phone with flashtool, and tried to flash the phone, but it was stuck on se logo, so I used pc companion to install stock gingerbread, it installed. But when I power it on, it's not 2.3, it's still 2.1 ! I don't know what these tunisian did, but they ****ed up my phone T_T
when I start it with my sim, I can enter my pin code, and I only have the blue wallpaper of 2.1 and the top bar. I can't access to anything, the three buttons do not work (except when I put the usb cable, I can use the return button to quit the "charge or connect" menu and minimize the bar when it is fullscreen).
When I don't put the sim, I have the configuration menu, but when I press proceed, it says me to insert a sim card and reset, I can't do anything at this state.
Did anyone have the problem ?
celuiquichaussedu48 said:
Hello guys,
after looking here a lot for improving my x10 (successfully, I love fxp ), I have my first problem, and it is a strange one.
I live in France, and a new carrier made very cool prices, so I decided to change carrier. But my previous carrier provider made its possible to not unsimlock my x10, so, when I went in holidays in Tunisia, I went to a shop where they are known to unlock phones, and they unsimlocked it, but they put an official 2.1 rom, but I couldn't go from cyanogen to stock 2.1... So I decided to install fxp.
I rooted the phone with flashtool, and tried to flash the phone, but it was stuck on se logo, so I used pc companion to install stock gingerbread, it installed. But when I power it on, it's not 2.3, it's still 2.1 ! I don't know what these tunisian did, but they ****ed up my phone T_T
when I start it with my sim, I can enter my pin code, and I only have the blue wallpaper of 2.1 and the top bar. I can't access to anything, the three buttons do not work (except when I put the usb cable, I can use the return button to quit the "charge or connect" menu and minimize the bar when it is fullscreen).
When I don't put the sim, I have the configuration menu, but when I press proceed, it says me to insert a sim card and reset, I can't do anything at this state.
Did anyone have the problem ?
Click to expand...
Click to collapse
If those Tunisians know something, they are probably here on xda-developers forum ..
You have a thread for sim unlocking, and I think that there is a way to check if your phone is unlocked properly via s1tool or is it possible to unlock it..Go HERE
Thanks, for the simlock soft.
But how can I make it to boot properly (ie having acces to menus, icons and all)
Well, I tried s1tool, and it says that it is still locked, but I don't understand, I was able before trying the update to call with the new carrier oO
PS : is there a way to root/flash without enabling debugging ?
I do not know if I can post this, but I managed to do here.
Debranding a knife around 1.6 android and use the ITS to upgrade
http://www.portalandroid.org/comunidade/viewtopic.php?f=55&t=5399
celuiquichaussedu48 said:
Well, I tried s1tool, and it says that it is still locked, but I don't understand, I was able before trying the update to call with the new carrier oO
PS : is there a way to root/flash without enabling debugging ?
Click to expand...
Click to collapse
Well, HERE you can find everything you want for unlocking, downgrading, rooting..(a lot of links)..
Just take it easy and don't rush..It's a simple process, you just have to understand and follow everything they say..
Cheers
Well, I tried again to backup the stock rom with pc copanion, and it worked, and now it is unsimlocked xD

[Q] sim not detected on x10mini pro after flash!!!

dear all;
I tried to flash my xperia x10 mini pro with flashtool and msm7227 (http://forum.xda-developers.com/showthread.php?t=1254225); and after rebooting my mobile, I get a small red cross over the network bars, and when I tried to detect my operator manually, I get a message telling me (your sim can't access to this operator!)...PS the same sim is working normally on my Nokia!
what to do ....
great thanks in advance for your help!
soo
soo55 said:
dear all;
I tried to flash my xperia x10 mini pro with flashtool and msm7227 (http://forum.xda-developers.com/showthread.php?t=1254225); and after rebooting my mobile, I get a small red cross over the network bars, and when I tried to detect my operator manually, I get a message telling me (your sim can't access to this operator!)...PS the same sim is working normally on my Nokia!
what to do ....
great thanks in advance for your help!
soo
Click to expand...
Click to collapse
My guess is that the simlock-certificate on your phone was incompatible with your try to unlock the bootloader, which results in loss of radio-capability (and that means gsm/3g) There are about three different methods of unlocking your bootloader in the link you posted, if none of them work you're out of luck i would think.
great thanks smg; this means that if I'm not able to find a way to unlock my bootloader, I'll loos my radio-capability for ever!!! ???
soo
soo55 said:
great thanks smg; this means that if I'm not able to find a way to unlock my bootloader, I'll loos my radio-capability for ever!!! ???
soo
Click to expand...
Click to collapse
Relock it first, usually your radio-capability comes back. (Provided you didn't flash a custom kernel yet, that should work fine, otherwise go back to stock firmware first)
If it comes back and you can't successfully unlock your bootloader, you're just limited to roms that don't require a custom kernel.
By the way: usually you can get a code from your provider in order to sim-unlock your phone, mine charges for it during the initial contractperiod, but after that they provide it for free. If you sim-unlock your phone using that code you're safe to unlock your bootloader too.
If you use third-party software to sim-unlock your phone, your mileage may vary (third-party apps use dirty hacks to do it, some hacks are supported by the bootloader unlocker some are not)
I had the same. My SIM-Card doesn't work and so I test my dad's SIM-Card and my brother's SIM-Card. But no one work. So i send my X10mini pro to Sony Ericsson and they repair it. I tryed to unluck the Bootloader twice and now it work I hadn.t problems! Now I'm happy with MINICM9
(Sorry vor bad English)
TimmePfeife said:
I had the same. My SIM-Card doesn't work and so I test my dad's SIM-Card and my brother's SIM-Card. But no one work. So i send my X10mini pro to Sony Ericsson and they repair it. I tryed to unluck the Bootloader twice and now it work I hadn.t problems! Now I'm happy with MINICM9
(Sorry vor bad English)
Click to expand...
Click to collapse
Hello.
I have the same problem.
What tutorial/choice did you made for your phone to work successefully with MiniCM9?

guyzzz plezz help me!!!!!!!

my mobile is not accepting me sim card & micro sd card
& i have also tried 2 unbrick it....through Sony PC Companion 2.1....
but the problem is again comming
plezz help me
still dumping my own post....................
Give us some info... what were you doing before the problem started? If you were unlocking your bootloader flash back to 2.1 with PC Companion or SUES and relock it. The loss of Signal/SIM is often down to that
x10man
check your inbox...
i have done rooting & install CWMInstaller-Windows-v4-dl ........
after reboot it go directly 2 recovery mod
& when i press back key it just start up my mobile & i loss my sim card & sd card
showing me cross sign in top off it
guyzz help me
lol..........
again bumping my own post.................
delta001 said:
lol..........
again bumping my own post.................
Click to expand...
Click to collapse
You may find that funny, but being impatient only serves to turn people off helping you. Remember, we are here for fun, not paid, so you can get an answer in minutes, or you can get an answer in a day, there is no need to demand attention.
If you need help straight away, there are phone-shops with qualified personnel to help you.
Now: How did you 'Root' your phone?
i have root it by CWMInstaller-Windows-v4-dl root & install recovery through it........
I've had the roughly the same problem (signal loss) after unlocking the bootloader and flashing a custom kernel and then CM7 the first time on an X10 mini pro. After following the procedure in this thread http://forum.xda-developers.com/showthread.php?t=1254225 I've first relocked my bootloader, unlocked it again, installed kernel and cm7... voila!
Maybe you can find some help there.
guyzz problem is not solve yet................any solutionzz plezzzz
delta001 said:
guyzz problem is not solve yet................any solutionzz plezzzz
Click to expand...
Click to collapse
Why are you not able to use pc companion "repair"? are you unable to boot and pull down the menu to connect?
No one can help you untill you explain in detail what you have done and the current state of your phone
---------- Post added at 04:47 PM ---------- Previous post was at 04:43 PM ----------
Try this
HTML:
http://forum.xda-developers.com/showthread.php?t=1268064
when i installed 2.1 android officially through sony PC companion 2.1
after that i rooted my device and installed CWM through this link http://forum.xda-developers.com/showthread.php?t=1490527
after that my battery died then when i switched ON my phone it directly went to recovery mode. and after pressing the back key my phone directly booted and showed an error "insert SIM card and then restart". i thought my phone was bricked therefore i repaired it through sony PC companion 2.1 again it is showing the same error. please HELP ME..!!
it sounds like your boot loader
theres allot of information to take in on this page but read it ALL theres a part about your sim lock certificate
http://forum.xda-developers.com/show....php?t=1254225
Troubleshooting section:
Common Problems:
1. My SIM Card is not recognised after unlocking phone with msm7227_setool2.cmd!
Ans: Redo unlocking procedure (step 5 onwards) using msm7227_semc.cmd.
hope this helps
(btw multi threads don't help either of us)

Categories

Resources