[Q] Help required and info also...URGENT!! - XPERIA X10 Q&A, Help & Troubleshooting

Hi guys,
I got x10 i from my fri who is residing in London... Its ORANGE carrier over there!! when i started the mobile after inserting the sim, it asked for the SIM NETWORK UNLOCK CODE.
First i tried with 0000 and 12345, but didn't work out!!
So when browsed on this problem i came to know that i need to unlock it...but many sites are offering unlock codes but it around $50- - $60 ...
And many of my fri's said that i can do it for free if i do debranding or flashing!!
As i am very new to these gadgets i want to know about the terms debranding, rooting and flashing n ROM flashing!! (Which i came across after reading many threads in the forums).... Please explain me these tings or provide the links where the info is located...
Guys, Could you please clear the following questions?
1) Does debranding the mobile will unlock the phone?
2) Does flashing and rooting will unlock the mobile??
After browsing i came across the some links to debrand the mobile and i followed the following process!!
with this help i downloaded UK Generic firmware files!! i.e.,
UK Generic X10i Firmware (R2BA020) which contains 2 files 1 of near to 150MB and other of 15 MB
I did till 7th step!! i.e., deleting the files in the db folder and running SEUS and when i got files... I did back up of these new files and renamed the downloaded files (Generic firmware files) with the same name..
Then again i ran SEUS, it said that i have already the latest firmware and while downloading the files ... i replaced the files with those files above one at starting and another at the end ... then it said that Installation failed!!!
So i got worried of my mobile!! and then i checked my mobile but the am able to access my mobile.... But when i insert the sim i got the same problem SIM NETWROK UNLOCK CODE!!!
Could any one please help on this??? For the above process i spent whole half a day!! and when i visited some mobile shops its of no use... in pune!!
One shop guy asked Rs 2000/- I think it is waste!! could you please anyone help on this???

i think u should try tis
http://forum.xda-developers.com/showthread.php?t=920746&highlight=flashtool
tis is called flashing.. it means flash an entire new firmware via flashtool
download the flashtool
and download ur choice of firmware
put the downloaded firmware in to the flashtool's firmware folder
boot into safe mode and then start flashing
i assume u know how to boot into safe mode? just like how u update via SEUS. pressing the back button while switching on
rooting simply means give u, a user super permission.. however, u might lost ur warranty.. but since u bought it from ur fren, i think the warranty ended as well??
i hope this helps..

Flashing is NOT unlocking.
One of the paid services is your only option for now. There are no free options for x10 yet. There were a few threads on this already & a few guys on the forum selling unlocks too if you do a search.
Search is your friend! ^_^
Sent from my X10a using XDA App

You should be able to get a unlock code off Ebay for around $10,they will need your IEMI number. There IS NO FREE SERVICE that offers unlocking codes.

Related

[q] x10 - no service due to sim unlocked by network after unloacked bootloader

Please guys help,
I've unlocked my bootloader with success and everything went well! then I used DoomsKernel 0.5 with success.
Problem is after that my Network sent me the SIM Unlock code as requested and as soon I inserted it I lost radio capability!! now I tried everything from other cards (no service) and also reverted to X10 factory reset on system putting original 2.3 available...
nothing... What can I do?? Laser's post advised to this but when I read it it was too late!!!
please help me to fix the No Service Issue,
thanks
Vitor C.
vpctoday said:
Please guys help,
I've unlocked my bootloader with success and everything went well! then I used DoomsKernel 0.5 with success.
Problem is after that my Network sent me the SIM Unlock code as requested and as soon I inserted it I lost radio capability!! now I tried everything from other cards (no service) and also reverted to X10 factory reset on system putting original 2.3 available...
nothing... What can I do?? Laser's post advised to this but when I read it it was too late!!!
please help me to fix the No Service Issue,
thanks
Vitor C.
Click to expand...
Click to collapse
Use the S1Tool to restore your bootloader then re-unlock it, I don't think you should have any issues since you're unlocked by code, which should leave you with SEMC CERTIFICATE in your bootloader, which is cleared for unlocking via the semc_qsd8520.bat file.
tried your way but with trips rom still didn't work... no sim card
u need to re-unlock network via setool2 to get network and this is the only way!
How dows it work then? do I need to buy the box? how can I do that...
thanks guys for your help
You can either buy the box which isn't cheap or find a shop to unlock it but make sure they use setool2 to do the unlock.
Sent from my Nocturnal X10i using XDA Premium App.
Hi guys,
thanks for your help... I guess it doesn't worth to buy the box and the software and here in Portugal I have no idea where I can find such a shop that can fix that
No matter which SIM I insert, always says no SIM Card... damn!
thank you guys. I still have a hope. tried with Omnius, but didn't work... it unlocked with success but it practice, got me nowhere other than spending 7€ !!
It really requires a box isn't it?
With the price of the box it seems I could always buy a new one...

[Solved]Help me delete data

Hey everybody,
I just got the x10 today and I've never hacked a Sony so I know nothing about it right now, so forgive my ignorance.
The phone was used and didn't come with a sim card. I've put 2 different sim cards in it that I know are good, but when I boot up it gives me a sim card error and only let's me make an emergency call.
I'm thinking that because his data is on it, it needs his sim card? I have always had cdma phones so sim cards are new to me also.
My question is... Is their a way to get into some kind of boot menu by a button combination at startup or something, where I can delete the phone data?
Any help is appreciated.
Edit... Phone is stock, not rooted, yet
Dude,it seems ur phone is sim locked and u can't use any sim card beside sim card ov network operator that locked ur phone.
Sent from my "z10i"
neoxx3m said:
Dude,it seems ur phone is sim locked and u can't use any sim card beside sim card ov network operator that locked ur phone.
Sent from my "z10i"
Click to expand...
Click to collapse
How would that happen? The phone is legit, no outstanding bill on that account and its not stolen. Are you saying I need his sim card to unlock it so I can use another?
Just to give you more info, when the lockscreen comes up, it says "sim card is faulty" but if I hold power and select airplane mode, then turn off airplane mode, it let's me past the lockscreen and then I get a toast box that says "sim is not provisioned mm2"
The phone was on at&t when it was used. I don't have an at&t acct. For now I just want to learn about it and root/mod it. Maybe ill call at&t.
Might be another issue :
Some anti-theft antivirus programs are able to lock your phone for your sim-card only (to prevent using another sims when phone is stolen).
If its set as device-manager, it also cant be disabled (requires some password).
So, try to boot up your phone without SIM card ant check this first. If device-manager is not set, then your phone is surely simlocked.
Thanks for the reply, I've tried booting up without a sim card and it gives me an error that no sim is installed and will only let me make an emergency call.
I called at&t last night and the rep asked me to hold the menu + return buttons while pressing power and I should get an option to hard reset the phone. That didn't work so she patched me to Sony. They had me download Sony pc companion and sent me instructions to "repair" it.
He said it was 1 of 2 problems. It's a "software glitch" or a broken sim port.
If the repair won't fix it, ill have to send it in and for $185 they'll fix it (yeah right). When I get home ill try the pc companion. This phone is in mint condition and was fully working before the guy that gave it to me went to an iPhone.
wikdNoob said:
Thanks for the reply, I've tried booting up without a sim card and it gives me an error that no sim is installed and will only let me make an emergency call.
I called at&t last night and the rep asked me to hold the menu + return buttons while pressing power and I should get an option to hard reset the phone. That didn't work so she patched me to Sony. They had me download Sony pc companion and sent me instructions to "repair" it.
He said it was 1 of 2 problems. It's a "software glitch" or a broken sim port.
If the repair won't fix it, ill have to send it in and for $185 they'll fix it (yeah right). When I get home ill try the pc companion. This phone is in mint condition and was fully working before the guy that gave it to me went to an iPhone.
Click to expand...
Click to collapse
Might be both - hardware malfunction or simple simlock. Personally expect simlock. My phone is not simlocked and when turned on it can run without sim card simply as PDA.
Try to flash your phone with generic WWE ROM and try again. Or before, check if phone doesnt have usb debugging on.
Afraid that no, but try to look with flashtool or adb (if yes, we can make full wipe within xrecovery)
HeliumX10 said:
Might be both - hardware malfunction or simple simlock. Personally expect simlock. My phone is not simlocked and when turned on it can run without sim card simply as PDA.
Try to flash your phone with generic WWE ROM and try again. Or before, check if phone doesnt have usb debugging on.
Afraid that no, but try to look with flashtool or adb (if yes, we can make full wipe within xrecovery)
Click to expand...
Click to collapse
If its sim locked then I'd think that I could use the previous owners sim to get into the system, right? Then how do I sim unlock?
I can't check for USB debugging because I can't get past the emergency call only screen.
I've got the pc companion downloaded on my working phone, when I get home I a couple of hours I'm gonna xfer it to the comp and run it, hopefully that'll fix it. If not, ill wait till Monday and get the previous owners sim and try that. If that doesn't work.... I'm gonna get the night vision goggles back that I traded for this phone, lol.
Running this phone without a sim is exactly what I want, just as a pda. How'd you do it, or better yet, what it called, sim unlocking? I can look for a guide, but I don't even know what its called. I feel really dumb about this phone, sorry bout that, if you came to the evo3d forum I could give you all the help you needed.
wikdNoob said:
Running this phone without a sim is exactly what I want, just as a pda. How'd you do it, or better yet, what it called, sim unlocking? I can look for a guide, but I don't even know what its called.
Click to expand...
Click to collapse
OK then If you want to use your phone as pda, without gsm or data connection, then the simpliest thing you can do is to flash stock generic ROM (you dont have to care about baseband and so on).
However you need to do a sim-unlock first because otherwise it will be still locked on the operator. Heart about many unlocking methods on websites, eg. this one (really expensive):
http://www.mobile-unlocker.com/sony-ericsson-xperia-x10/rs2wp9/
Never tried (always buying phone without sim-lock).
What operator is your phone locked?
YOu probably have to google about your exact operator locked version, hopefully you will find unlocking code or online service for it.
BAM! I got it, thanks for all your help. I used the pc companion and chose repair, I lost all data but that's ok, I was gonna erase data anyway. When I boot up it still gives me a notif that the sim is not provisioned but I can still get into the system.
Time to start hacking away at this thing, I've got a lot to learn I'm sure. I downloaded flashtool and it says it'll root so I'm gonna try that. I'm open to any more help you can give out, you probably think that some of the easy stuff is common knowledge but even the smallest stuff will help me get started. I'm gonna start reading in the sticky section, thanks again for the replies.
Also, after the repair, I have a different lockscreen, it looks like an iPhone lock kinda. Before, I had the lock that went up and right on a curve kinda, how do I get back to that one?
wikdNoob said:
Also, after the repair, I have a different lockscreen, it looks like an iPhone lock kinda. Before, I had the lock that went up and right on a curve kinda, how do I get back to that one?
Click to expand...
Click to collapse
Now i understand why you wasnt able to get into system without sim You were on old android 1.6 which was default OS when X10i was released. But there were two big software updates - 2.1 and last year our beloved 2.3.3.
Thats why you have different lockscreen. In 1.6 it was shaped like half-circle, in 2.3 its just a simple horizontal slide... But there is not any solution how to get this lockcreen back as I know. BTW.: Also liked the old one lockcreen
Everytime you will need a help, post and we will surely help you !!
HeliumX10 said:
Thats why you have different lockscreen. In 1.6 it was shaped like half-circle, in 2.3 its just a simple horizontal slide... But there is not any solution how to get this lockcreen back as I know. BTW.: Also liked the old one lockcreen
Click to expand...
Click to collapse
Ok, I'm starting to get it now... My system info says
Firmware version 2.1-update1
Baseband 2.1.65
Kernel 2.6.29
So far I've rooted, installed xrecovery and unlocked the bl. All the roms I've looked at say I need a higher baseband to use that rom. Can I use the pc companion to update to 2.3.3, and is it gonna cause an issue since I have a custom recovery and unlocked bl? The reason I ask is because on an LG I had, it would brick if you did an official update with a custom recovery.
wikdNoob said:
My system info says
Firmware version 2.1-update1
Baseband 2.1.65
Kernel 2.6.29
Click to expand...
Click to collapse
Ohh, branded phones are really loosers It seems that your version wasnt updated to 2.3.3, on which are based all roms for X10i and X10a.
wikdNoob said:
So far I've rooted, installed xrecovery and unlocked the bl. All the roms I've looked at say I need a higher baseband to use that rom. Can I use the pc companion to update to 2.3.3, and is it gonna cause an issue since I have a custom recovery and unlocked bl? The reason I ask is because on an LG I had, it would brick if you did an official update with a custom recovery.
Click to expand...
Click to collapse
I recommend you to use Flashtool intead There are problems to get the ftf file with generic ROM, which also includes .71 baseband which is surely needed for any custom ROM. But I think this is simplier solution. If you want active link to FTF bundle I will post it (also with guide, already wrote it for another users).
You can also use PC Companion, and it surely dont affect your phone in any way. If you rooted it and installed xrecovery its surely not problem (I performed this once on my device). Dont know about unlocked bootloader (dont have it and dont want to have it ), but think thats also not problem.
You can brick X10i only if you flash kernel and something unexpected happens (cable unplug etc...).
Wow, 200th post - will celebrate my anniversary
HeliumX10 said:
Ohh, branded phones are really loosers It seems that your version wasnt updated to 2.3.3, on which are based all roms for X10i and X10a.
I recommend you to use Flashtool intead There are problems to get the ftf file with generic ROM, which also includes .71 baseband which is surely needed for any custom ROM. But I think this is simplier solution. If you want active link to FTF bundle I will post it (also with guide, already wrote it for another users).
You can also use PC Companion, and it surely dont affect your phone in any way. If you rooted it and installed xrecovery its surely not problem (I performed this once on my device). Dont know about unlocked bootloader (dont have it and dont want to have it ), but think thats also not problem.
You can brick X10i only if you flash kernel and something unexpected happens (cable unplug etc...).
Wow, 200th post - will celebrate my anniversary
Click to expand...
Click to collapse
Got it, I installed DiXpreia 7 'avenger' using xrec for Rom and flashtool for the ftf file. wow, what a difference in graphics, this is cool.
I appreciate all the time you've spent on me. Congrats on the 200th, I'm helping you stack up some thanks' too
One last thing, what's the benifit of an unlocked bl? And would it benifit me to unbrand since I have a custom Rom?
wikdNoob said:
I appreciate all the time you've spent on me. Congrats on the 200th, I'm helping you stack up some thanks' too
Click to expand...
Click to collapse
Haha, thanks bro !
wikdNoob said:
One last thing, what's the benifit of an unlocked bl? And would it benifit me to unbrand since I have a custom Rom?
Click to expand...
Click to collapse
For unlocked bootloader there is only one main benefit. You can flash any custom kernel directly. On locked bootloader you can also use custom kernel, but it uses "bypass" method - once stock kernel is loaded, special init script gives the control to custom kernel and then custom kernel is loaded. This is 100% safe for noobs and also devs (I was doing some kernelt tweaks, thats why I am on locked - if I do unloadable kernel and flash it on unlocked device... It will be bricked ). But it takes about 2x time to load the system on reboot, because you need to load two kernels instead just one. If you unlock your bootloader, you can overwrite stock kernel with custom one. And when device it powered on, custom kernel is loaded directly and loads faster then by "bypass" method. Another "benefit" is that all of CyanogenMod ROMs requires unlocked bootloader
Unlocked bootloader doesnt affect your "brand", it wont remove it. As wrote before, you need some service which offers unlocking codes or I saw saome tutorials on youtube (give a search ).
But think this is a little nonsense if you want to use your phone as PDA. "Branding" affects only gsm network and 3G data, so you cant use these features without SIM.
Thanks for the info on the locked/unlocked bl.
Now for another question. Let's say I install a Rom and kernel combo that aren't compatible, you said it'll brick. Will that be a hard/permanent brick or could I just use the pc companion and repair it.
wikdNoob said:
Thanks for the info on the locked/unlocked bl.
Now for another question. Let's say I install a Rom and kernel combo that aren't compatible, you said it'll brick. Will that be a hard/permanent brick or could I just use the pc companion and repair it.
Click to expand...
Click to collapse
On locked bl you can everytime use Flashtool or PC Companion to reapir your phone.
On unlocked mostly too. BUT, as told you. Only if you flash loader or kernel badly (bad cable, unexpected power shutdown etc.) you cant repair your phone with any software. Or, to be perfectionist You can unbrick it, using the "JTAG" connector with some "JIG" box. These hardware are hard to buy, its highly specialized devices and costs about 200€ or even more... With these tools you can unbrick any device everytime, even with damaged system ROM, or unloadable kernel. It will simply overwrite the whole NAND adress by adress, byte by byte with standart system image.
You can also use some high-level services which are equipped with this hw and could do it for you. But its also expensive.BTW. thats why I am thinking about to buy JIG box perosnally

Unlock Custom Firmware

Hi was looking for advice on a phone I bought, I am completely new to the smartphone thing but just took the plunge and bought a Samsung Galaxy S2 from Ebay. The phone is locked to a network, but the listing said it was easily unlocked. Anyway I took the phone to an unlocking place and the guy said he could not unlock the phone as it has custom firmware??.
After finding this site I did a bit of searching and found out I could unlock the phone by rooting it, I found a relevant guide, which says to use Odin software etc. I don't really want to brick the handset after the guy saying he could not unlock it, any advice would be great.
The phne was bought in the UK, but when I did a reset to factory defaults everything was in Danish, and I only got English language settings back after using babylon translator on Google to figure out what was going on.:silly:
Any advice would be great and sorry for being a total smartphone noob.
ThNKS
Proto
I've never tried the methods of software from the link below but it's not dangerous to say you'll brick your phone.
http://forum.xda-developers.com/showthread.php?t=1360174
It's an unlocker tool that requires you to input your efs data and it'll probably patch it.
Sent from my GT-I9100 using Tapatalk 2
Thanks for the quick reply there :good:
So this efs folder is actually in my phone?, it has my IMEI number?,
When I done the *#06# thing I got a number would it be easier to just phone the provider who has the set locked, or will they say its got custom firmware as well, it's all a bit confusing really
There's an app on here called EFS Pro, either that or download kTool from the Play Store.
Here's the link for EFS Pro:
http://forum.xda-developers.com/showthread.php?t=1308546
You need to extract the folder from the phone and put a file called nv_data.bin into the unlocker program.
Sent from my GT-I9100 using Tapatalk 2

[Q] [q] big problem with x10 :(

Hi After trying to unlock very many failed bootloader I've seen what in fact if I falter my Mobile on the 2.1 version go there I've read ...
So I downloaded a 2.1 firmare and it gestock with the Flash tool and now when I turn my mobile on I come to the PIN entry further, that it is not even used in the introductory menu where one language ect. can select ....
Then I took Seus & PC Companion and it resets .... But after the reset still does the same after PIN entry goes not just continue although I can pull down the menu bar, but more is not I see just only the background image and the bar at the top but nothing more I can not help Need urgent help.... Sorry for my bad English :S But i need Help Hope you can help
have you tried to remove your simcard?
1. remove your simcard
2. try to boot your device
3. if the problem still exists, reflash your phone...
Phone flashing guide for xperia x10
Flashtool guide from G-FACE
[25NOV][FLASHTOOL GUIDE] HOW TO for n00bies - G-FACE GUIDE
ROM Collection by THeLogiC
[Completed]X10 Stock Firmware Collection
Have a nice day!
Ehm.... Thanx
Now, works but my card is locked and i haven´t service :S
rec0rdzz said:
Ehm.... Thanx
Now, works but my card is locked and i haven´t service :S
Click to expand...
Click to collapse
Renew your simcard at your telecommunication service center

[Q] After update to 4.1.2 phone got simlocked and doesnt unlock.

hello everybody
Yesterday my phone asked me to update and i accepted it unfortunately.
I live in France, phone is bought here blocked by SFR operator.
One year ago i got the code to unblock from SFR and I unblocked it and since then i have used FREE, COSMOTE(Greece) and lately i m using BOUYGUES operator.
Problem:
After the update, phone got simlocked again and with my BOUYGUES sim it asks me for a "sim network unlock pin". I insert the code i had but it doesn't unlock it.
I called SFR and fun fact is that they claim that the unlock is permanant (they are not aware of this new issue) and the unlock code unique. I asked them the code to ensure what i had is correct and they confirmed... So code is 100% correct...
Since it was not working they told me to remove any sim card from the phone and do the following steps...
1 click on TELEPHONE icon
2 enter *#46744674 and press #
3 the code should disappear
4 then enter #7465625*638* and press #
5 you will now be prompted to enter the unlock code
6 enter the code NCK and press ok OK.
if code is good, phone gets unlocked
So while step 2-3-4 work fine, the #7465625*638*# disappears but step 5 never happens... There is not screen prompting me to insert the code....
I called Samsung after this and I told them everything i ve tried...
they proposed me to do this --> *#0111*CODE# and it will get unlocked... (super unfriendly french customer service hanged up on me)
I did it but nothing happen.. not even the *#0111*CODE# got disappeared like it happened with steps 2-4 above....
To me it looks like the new android 4.1.2 messed up everything....
Problem seems new... i found two posts in french describing the same problem with no solution but i cant post the links here.
Any ideas how to fix this?
Thanks for reading this
Yeah, root it & unlock it.
Sent from the little guy
Root the phone and then use galaxsim_unlock app from " http://forum.xda-developers.com/showthread.php?t=1846451 " or u can download the app from play store!
Issue in process of rooting the phone - to unlock the phone
Hi,
I have similar problem with my Samsung Galaxy S II SGS2 GT-i9100.
My phone is UNROOTED.
After it was updated from ICS to Jellybean (upgrade via the air, not using Kies and not using Odin), I am also asked for SIM UNLOCK PIN.
The phone was originally bought locked to O2 UK network, then unlocked, but the unlock code used in past does not work now.
The problem is that in all places it says to root the device, and in order to root it, I am advised to create a backup copy of efs folder, and in order to backup the efs folder I need to have root permissions... - deadlock !
In additions, many guides says that in order to root the phone, I need to have only for phones that are SIM FREE, which brings me back to start - I will not be able to flush ROM/Kernel to root it as my phone is SIM locked...
Any suggestions that will help me unlock the phone?
Thanks!
dudders007 said:
Root the phone and then use galaxsim_unlock app from " http://forum.xda-developers.com/showthread.php?t=1846451 " or u can download the app from play store!
Click to expand...
Click to collapse
You're very confused.
1) Root your phone. There are multiple methods. Search/read/learn & choose whichever one you think is best for you. The phone does not have to be 'sim-free' or unlocked or anything else in order to root it. As I said, you are clearly confused. You need to search/read/learn & not do anything to your phone until you're no longer confused, or you'll 'break' it.
2) Create an EFS backup using kTool from Google Play. Keep one copy of this backup on your PC, and another copy on the external SD card in your phone if you have one.
3) Unlock the phone with whichever app you want to use to unlock it.
Hello
I found an easy way to root it but i cant post a link... so google "[RESOLU] code deverouillage reseau" and you ll see the thread... (it is in french)
As user "gab34" says, i downloaded the proper zip file (in my case was XWLSD_root.zip) and put it in the sd card as it is (as a zip). (you have to subscribe to let you download the file :/)
Then i pressed up-power-home buttons until it turns off and on again.
Then i was in the recovery meny , and with the volume button i went down to "apply update from external storage" i pressed the power button to enter, chose the file XWLSD_root.zip, press again power button, installation will take place in ../ , press power button, the reboot now and power button.
The phone restarts as rooted and then you can use GALAXSIM to unlock it..
You download Galaxsim unlock for free, then it tells you if it can unlock and if so you pay 3 euros for full version and unlock it....
Try google translator and a french speaker if you need help with the site... It took me 10 minutes to do it...
If not, try to google how to root easily like i did with just a zip file in the sd card...
Hope it helps
Thanks but we kinda know how to do that.
Please don't (try to) post a link from another site, those sites get the info from xda anyway.
Sent from the little guy

Categories

Resources