I have a HTC Mega PB74100 that is stuck at bootloader (tri-color screen) everytime i switch it on. I need a help to get it back to work as usual.
The screen says:
PB74100
SPL-1.28.0000
MicroP(LED) 0x03
ENGID 0xF
PCBID 0x80
PanelInfo 8-0xFF
What I tried so far:
1. Tried to flash an original rom using this file I downloaded from shipped-roms website:
RUU_Mega_hTC_Asia_WWE_1.28.707.3_Radio_Signed_61.41t.25.31_3.48.25.27_Ship.exe
At 1% it said invalid vendor or something and phone restarted back to bootloader.
2. Downloaded MTTY, but did not find a guide for HTC Mega.
3. Tried hard reset (volume up + down + power), but it went to bootloader instead.
Thanks in advance for your help
still looking for help.. thanks
you cannot flashed your ROM unless you do the hard SPL first. I hope you read the thread by yellow fever as it was very helpful for newbie flasher....
http://forum.xda-developers.com/showthread.php?t=668926
red_brindle said:
you cannot flashed your ROM unless you do the hard SPL first. I hope you read the thread by yellow fever as it was very helpful for newbie flasher....
Click to expand...
Click to collapse
Thanks for the info, but i can't do the hardSPL since it is stuck at bootloader tri-color screen.
Related
hi i had shaps wm6 installed , and then tried to upgrade my radio , it went to 2 % then came back with a error messege , my phone is now stuck in bootloader , any fixes?
in bootloader it says herm300
IPL-1.04
SPL-2.10.0ipro
solved it useing hard flash , thanks !
flashed phone with the lasest unlocker software , but now all i get is the htc smart mobility splash screen ?
mda herm300 it only shows t-mobile screen
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
Have you tried:
- Hard Reset
- Reflashing
- Rerunning the unlocker
- Mtty task 28
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
The forum is NOT for ASKING for help. The forum is FOR reading and then asking...
Recovered From Stuck on Bootloader & Splash Screen
Hi,
I had the same problem (1st stuck on bootloader- reflashed custom ROM then Stuck On Splash Screen with no GSM) on my SPV M3100 after a failed radio upgrade first it was stuck in bootloader for the longest time while i searched and re-tried uprading the radio rom inbetween using recover tools like mitty.exe and NBHextract but nothing happend until i had a brainstorm i had previosly downloaded an original vendors ROM for the Hermes so i flashed it and Pow Pow Pow - Radio and Software Rom back to normal and working OK!!!
During th eflash of my rom radio with 1.54.00.10 the program stopped and my mobile restart in bootloader.
The problem is that the flash program doesn't want to restart flashing and my mobile stay on bootloader menu.
HELPPPPP Please..
What do you mean by "the flash program doesn't want to restart flashing"
Did you try to flash your original shipped ROM entirely to the device?
What is IPL/SPL on your device?
Sorry for my english...
I flashed with RUUWrapper.exe on my PC with usb connection but during the verification the soft said me error 260 the device not connect.
Is there a possibility to flash the rom radio without PC, directly on my mobile ?
Thanks
on the bootloader screen :
HERM200
IPL-1.04
HERM200
SPL-2.03
Looks like the FLASHING TOOL is not compatible to your device! What OPERATING SYSTEM are you using?
I am not sure if your device is already CID unlocked?
If you run on XP and your device is CID unlocked use the CustomRUU (search the forum), if not: read the WIKI!
My device is unlocked and I use wwindows XP
How can I flash with serial?
this is what you get for not flashing Hard-SPL. idiot
I'm ok but how can I do?
please...
HELLLP (ive been upgrading since the xda II) and i recently got a tmobile hermes with wm5! then got wm6 upgraded it and got to about 78% and my pc died and then i tryed recovery did not work had to go to work so i left it! got back and ive tryed so many more upgrades of the image with no luck its stuck on splash screen! ive placed it into bootloader mode then ran ruu wrapper and it gets to the bit of updrading (25mins and a progress bar) and the phone goes white with upgrading image 0% then on the pc i get error 262!! and thats as far as i got please can some1 help thankyou so much
here is all my information that ive got!
bootloader mode = herm300 IPL -1.01 (in white text)
Herm300 SPL - 1.04 (yellow text)
when i restart the phone and its stuck on bootloader mode this is the info
m 05 - r 1.05.05.00
s 04 g 32.36.7010.04h
b 06 d 3.62
please can u ask as many people as you can ive known about this since the xda II days but never needed help and i know some1 can help this is a great website and forum thanks
I have problem :-(, my S310 is death.
I turn on S310, but his freezes on Microsoft Logo... :-(.
I try flash other ROM over bootloader, but flash stoped on 4% and S310 rebooted...
In S310 is ONBL: 1.05.0000, SPL: 1.05.0000, Oxygen 1U.
My Oxygen is HTC S310.
Anybody have any ideas ??
PS lease excusive me for my bad english.
you mast flash with bootloader this rom
http://rapidshare.de/files/38259115/RUU_Oxygen_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe.html
and then you can flash any rom
Ok thanks for reply ;-)
I test it ...
:-(
I download this ROM, but it is not functional :-(.
Same problem Device has reboot on 4% flash process :-( :-(.
Any ideas ??? Pls
i have your problem and when i flash, all rom stopped 4%, because are rom cocking. the only one that no stopped was http://rapidshare.de/files/38259115/RUU_Oxygen_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe.html. try again.
when stopped 4% what error appear?
error code
:-( I try flash ROM from you, but same problem. Just i Flash ROM: RUU_Oxygen_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe
Flashing process is without a problems, but on 4% my oxygen reboot...
And flash utility write: ERROR [294]: INVALID VENDER ID
I dont know how next, thx for reply...
Hi Jurig
What did you do?
I have the same problem!!
Hard Spl Not Work
You must make hardSPL part boot and not install another version of Statistics is not compatible with HTC Oxygen.Y have 1.005.0000 SPL means that no longer kent install another rum. If you folow carefully written and why not install all the rrom with the SPL and OS but only the bone y had not separate that issue. The only solute is imei-check.co.uk order to unlock part of boothloader and will save the phone.
Thanks Geo 2000
How can I make Hard SPL? The phone is HALTED on splash screen!
I can't synchronise with PC so I can't copy anything to phone memory.
The only thing I can do is entering BOOTLOADER by pressing camera and power buttons.
(I have SPL 1.70.0000)
Thanks friends
There had to install the archive with the bone and spl.Had to extract with Nbextract.exe and Htcrt.exe to recover rom only with the bone. had to do with the first date HardSPL method posted here: http://forum.xda-developers.com/showthread.php?t=340283 after those install rom respectively.Yf no longer open Windows no longer can repair only by sal the program from imei-check.co.uk. good luck
jurig said:
I have problem :-(, my S310 is death.
I turn on S310, but his freezes on Microsoft Logo... :-(.
I try flash other ROM over bootloader, but flash stoped on 4% and S310 rebooted...
In S310 is ONBL: 1.05.0000, SPL: 1.05.0000, Oxygen 1U.
My Oxygen is HTC S310.
Anybody have any ideas ??
PS lease excusive me for my bad english.
Click to expand...
Click to collapse
Try to make hard-reset..
How to do the Hard Reset?
Please help...
My Oxy is halted on HTC logo splash screen...
RA
abramq said:
Please help...
Click to expand...
Click to collapse
Press and keep two top soft-keys. Press "Power".
Wait (keep two top soft-keys!) until message "Press 0 to restore factory default, Other keys to quit" on screen.
Release soft-keys. Press "0"
Reyter said:
"Press 0 to restore factory default, Other keys to quit" on screen.
Release soft-keys. Press "0"
Click to expand...
Click to collapse
Oh, thans, but... there is: "Press Send key to restore..."
Where is the "Send" key? (pressing "0" doesn't help)
Probably death of my good Oxy...:-((
RA
send key is your dial number key
nemphis said:
send key is your dial number key
Click to expand...
Click to collapse
Thanks a lot!
Any way...still frozen on splash HTC logo...
RA
Press "Green" button
abramq said:
Thanks a lot!
Any way...still frozen on splash HTC logo...
RA
Click to expand...
Click to collapse
What SPL are you? IF YOU DO NOT 7.77.7777 and 1.05.0000 MAY CANT NOT DO NOTHING. If you 7.77.7777 May settled once rom.not matter which of them install only itself to be part of the bone
SOLVED)
Thanks to good man it is ok now
http://forum.xda-developers.com/showthread.php?t=391602&page=4
RA
Not Solved for me!
I downloaded that "Russian signed" rom and tryed to flash my Orange SPV C100 (equivalen to Htc Oxygen): Same problem, the operation failed and the phone restarts at 4%
(My SPL version is 1.07.0000)
I have a Niki100 that can't boot, it stops in the screen that shows "smart mobility" and at the bottom the info in red letters.
Here he shows
M 04
B 04
R 1.58.16.27
G 25.61.30.03H
D 1.31
I can boot it to the 3 colors screen, when connec't the cable at the white stripe it changes from serial to usb, but can't flash any rom it stops at 0% with error! At this screen it shows:
niki100
SPL-1.16.0000
CPLD-4
Already tried several official rom's some gives me ID error because it's locked to vodafone, but also tried an Vodafone spanish rom and got update error.
From the versions it's something wrong? It's not my pda I'm used to work with an Prophet, I don't know niki's spl, hard spl, etc... stuff...
Can anyone help?
Do a hard reset, if it boots then do hardspl and after flash rom of your choice.
Still the same! This is a rom problem...
Have you read any of the threads about flashing????; you have to HardSpl first your device before anything else, then the CID Unlock and then you can flash any ROM; (I recomend HardSpl 1.22)
I've the same issue ...
I've "hardspl" my device before ... but now no access at all to the device
it's stock on the HTC logo...
I can't go to the rainbow boot ... the PC don't see it
help please
carlosmozas said:
Have you read any of the threads about flashing????; you have to HardSpl first your device before anything else, then the CID Unlock and then you can flash any ROM; (I recomend HardSpl 1.22)
Click to expand...
Click to collapse
I get the pda already at this state... I didn't do anything yet to him!
I too have the same issue
I too tried many options... nothing working....
Still i have an option left, i heard that you can boot ROM from SD Card, this may help us to proceed further(avoid boot issues)... Let me try and update you
marciton said:
I've the same issue ...
I've "hardspl" my device before ... but now no access at all to the device
it's stock on the HTC logo...
I can't go to the rainbow boot ... the PC don't see it
help please
Click to expand...
Click to collapse
Already try the sd method and some roms tells wrong vendor other (Vodafone) just stays at "loading..."
No boot, the device is hung, no way out ...
marciton said:
I've the same issue ...
I've "hardspl" my device before ... but now no access at all to the device
it's stock on the HTC logo...
I can't go to the rainbow boot ... the PC don't see it
help please
Click to expand...
Click to collapse
I have the same issue:
after I have flashed new Insomnia 3.01 ROM,
the phone will not install any software first and than freezed.
After I have take the battery out and put it on again,
device has stopped responding and boots no more, shows HTC Logo with
radio version etc.
Could anybody help me?
Okay guy's, I'm not sure if this will help you or you already tried but read this http://forum.xda-developers.com/showthread.php?p=2183617 maybe this will help.
Wish you all GOODLUCK
Hi i have 1 hermes Spv m3100 and phone when comes to me was on and need to unlock network code
i do unlock using HTC_Hermes_SIM_CID_Unlock_v3 unlocker
in the half of flashing my pc goes off
and phone cant flash now.
i cant do HSPL for write any rom .so i need to flash official rom but i cant find that.
Now phone can go in bootloader mode but cant turn on fully and hang on windows logo.
When i go in bootloader is same this
HERM100
IPL-1.00
HERM100
SPL-1.11
Phone is ORANGE and come from UK
Now what shall i DO?
hamed_karamouz said:
Hi i have 1 hermes Spv m3100 and phone when comes to me was on and need to unlock network code
i do unlock using HTC_Hermes_SIM_CID_Unlock_v3 unlocker
in the half of flashing my pc goes off
and phone cant flash now.
i cant do HSPL for write any rom .so i need to flash official rom but i cant find that.
Now phone can go in bootloader mode but cant turn on fully and hang on windows logo.
When i go in bootloader is same this
HERM100
IPL-1.00
HERM100
SPL-1.11
Phone is ORANGE and come from UK
Now what shall i DO?
Click to expand...
Click to collapse
you must hard reset device and try to Flash ROM again ,,,
for official Rom you can get in http://www.shipped-roms.com/index.php?category=windows mobile&model=Hermes
Tnx to replay
i had tested before hard and soft reser but nothing
I also try many rom from there and all of them have a Invalid Vender ID error
I tested these file
Code:
SPV_M3100_ROMUpdate_1007.exe
SPV_M3100_ROMUpdate_0407.exe
RUU_Hermes_O2_UK_3.62.206.2_6275_1.50.00.00_108_Ship(3).exe
HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe
But still same
In first step of turning on phone wrote NO GSM and fast disappear
Why no answer?
Can we hspl phone when phone is in bootloader mode?
hamed_karamouz said:
Why no answer?
Can we hspl phone when phone is in bootloader mode?
Click to expand...
Click to collapse
could of course , why not ...??
you live connect to a usb synchronization and Flash ROM by clicking hspl.batch
finished it! {All of it depends on understanding and Your lucky}
I am using this Hard-SPL-V7
But it cant find device
The Update Utility cannot connect to your PDA
But when i have flash rom it flashed and come out of flash in 1% and invalid id error
and i cant do Hspl using MMC always this error
00068002