Hi i have 1 hermes Spv m3100 and phone when comes to me was on and need to unlock network code
i do unlock using HTC_Hermes_SIM_CID_Unlock_v3 unlocker
in the half of flashing my pc goes off
and phone cant flash now.
i cant do HSPL for write any rom .so i need to flash official rom but i cant find that.
Now phone can go in bootloader mode but cant turn on fully and hang on windows logo.
When i go in bootloader is same this
HERM100
IPL-1.00
HERM100
SPL-1.11
Phone is ORANGE and come from UK
Now what shall i DO?
hamed_karamouz said:
Hi i have 1 hermes Spv m3100 and phone when comes to me was on and need to unlock network code
i do unlock using HTC_Hermes_SIM_CID_Unlock_v3 unlocker
in the half of flashing my pc goes off
and phone cant flash now.
i cant do HSPL for write any rom .so i need to flash official rom but i cant find that.
Now phone can go in bootloader mode but cant turn on fully and hang on windows logo.
When i go in bootloader is same this
HERM100
IPL-1.00
HERM100
SPL-1.11
Phone is ORANGE and come from UK
Now what shall i DO?
Click to expand...
Click to collapse
you must hard reset device and try to Flash ROM again ,,,
for official Rom you can get in http://www.shipped-roms.com/index.php?category=windows mobile&model=Hermes
Tnx to replay
i had tested before hard and soft reser but nothing
I also try many rom from there and all of them have a Invalid Vender ID error
I tested these file
Code:
SPV_M3100_ROMUpdate_1007.exe
SPV_M3100_ROMUpdate_0407.exe
RUU_Hermes_O2_UK_3.62.206.2_6275_1.50.00.00_108_Ship(3).exe
HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe
But still same
In first step of turning on phone wrote NO GSM and fast disappear
Why no answer?
Can we hspl phone when phone is in bootloader mode?
hamed_karamouz said:
Why no answer?
Can we hspl phone when phone is in bootloader mode?
Click to expand...
Click to collapse
could of course , why not ...??
you live connect to a usb synchronization and Flash ROM by clicking hspl.batch
finished it! {All of it depends on understanding and Your lucky}
I am using this Hard-SPL-V7
But it cant find device
The Update Utility cannot connect to your PDA
But when i have flash rom it flashed and come out of flash in 1% and invalid id error
and i cant do Hspl using MMC always this error
00068002
Related
i got problem when flash my pda.
i try flash O2 rom to T mobile...
i stuck at windows screen and try way in wiki also cant.
so i think i need dl something to flash it a boot loader.
which file should i dl?
me 1 is:
HERM100
IPL-1.01
SPL-1.09
ahdu said:
i got problem when flash my pda.
i stuck at windows screen and try way in wiki also cant.
so i think i need dl something to flash it a boot loader.
which file should i dl?
me 1 is:
HERM100
IPL-1.01
SPL-1.09
Click to expand...
Click to collapse
I would start with Hard SPL. Then read, read, read.
i had try the way in wiki also cant,
try force flash using hard SPL v7 also cant.
it fail when verifying the information on my hermes.
it say cannot connect to my pda.
but i already connect it and go in boot loader already.
Put your phone in bootloader and flash another ROM should be as simple as that. I have built many roms and some have gotten stuck at the windows screen so i just flash a nother working rom and I'm good to go.
OFCOURSE you should all ready have SPL7 on your phone since thats the only way to flash these days all the cool people are doing it!
austinsnyc said:
Put your phone in bootloader and flash another ROM should be as simple as that. I have built many roms and some have gotten stuck at the windows screen so i just flash a nother working rom and I'm good to go.
OFCOURSE you should all ready have SPL7 on your phone since thats the only way to flash these days all the cool people are doing it!
Click to expand...
Click to collapse
i try with SPL v7 in this forum already, but still cant.
when verifying my pda info, it come out erro say no connection,
and i already connect pda to pc in boot loader, also show usb words on boot loader screen. i check the usa hub at pc, also got show my pda..
is that the ROM i use for flash not suitable or what?
can all give some rom to try?
m pda is
HERM100
IPL-1.01
SPL-1.09
Hi i'm newbie
I'm french thus excuse me for my english
I try to upgrade my htc in WM6, i sucess, no problem.
After i upgrade with a rom radio and the upgrade block at 40 %.
Now the phone boot in tricolor mode.
IPL-1.04
SPL-2.10.Olipro
I find in the forum that for unbricked my htc i must to flash any rom in nbh format.
How to do that.
I try to install also original ROM_9600_FRA_10303.exe rom but activsync it not active.
Someone can help me please
thanks
Connect you device in bootloader screen with your PC with USB and you should see USB appear at the bottom of the screen on yor device. Now flash any .nbh with the RUU wrapper and select SPL 2.10 New bootloader and flash the ROM...
what is the RUU Wrapper, where can i download it?
unikgwada said:
what is the RUU Wrapper, where can i download it?
Click to expand...
Click to collapse
Here it is
RUU wrapper is a software?
Explain me which is it
unikgwada said:
RUU wrapper is a software?
Explain me which is it
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=298737
when i use RUUWrapper i havbe an error [260].
What i can do
In the tri color screen with the device plugged in via USB do you have USB written at the bottom? Does your device appear in the device manager?
Yes USB is written on the bottom, and yes the phone appear in device manager .
What are you using XP or vista?? You could try a different USB port or if that doesn´t work you may have to roll back the driver... read this http://forum.xda-developers.com/showthread.php?t=299657
I'm using XP.
When i use myyt.exe the phone make something, but when i try to upgrade any rom i have always this message error [260]
i try to update with rom radio 1.47.00.10 , the upgrade is correct 100%
but when i reboot i return in tricolor mode
I success to install rom with UUwrapper but now the phone block on the picture windows mobile
Thanks
i fine a the solution
Could you please share the solution ? I've got a similar case, thanks.
During th eflash of my rom radio with 1.54.00.10 the program stopped and my mobile restart in bootloader.
The problem is that the flash program doesn't want to restart flashing and my mobile stay on bootloader menu.
HELPPPPP Please..
What do you mean by "the flash program doesn't want to restart flashing"
Did you try to flash your original shipped ROM entirely to the device?
What is IPL/SPL on your device?
Sorry for my english...
I flashed with RUUWrapper.exe on my PC with usb connection but during the verification the soft said me error 260 the device not connect.
Is there a possibility to flash the rom radio without PC, directly on my mobile ?
Thanks
on the bootloader screen :
HERM200
IPL-1.04
HERM200
SPL-2.03
Looks like the FLASHING TOOL is not compatible to your device! What OPERATING SYSTEM are you using?
I am not sure if your device is already CID unlocked?
If you run on XP and your device is CID unlocked use the CustomRUU (search the forum), if not: read the WIKI!
My device is unlocked and I use wwindows XP
How can I flash with serial?
this is what you get for not flashing Hard-SPL. idiot
I'm ok but how can I do?
please...
HELLLP (ive been upgrading since the xda II) and i recently got a tmobile hermes with wm5! then got wm6 upgraded it and got to about 78% and my pc died and then i tryed recovery did not work had to go to work so i left it! got back and ive tryed so many more upgrades of the image with no luck its stuck on splash screen! ive placed it into bootloader mode then ran ruu wrapper and it gets to the bit of updrading (25mins and a progress bar) and the phone goes white with upgrading image 0% then on the pc i get error 262!! and thats as far as i got please can some1 help thankyou so much
here is all my information that ive got!
bootloader mode = herm300 IPL -1.01 (in white text)
Herm300 SPL - 1.04 (yellow text)
when i restart the phone and its stuck on bootloader mode this is the info
m 05 - r 1.05.05.00
s 04 g 32.36.7010.04h
b 06 d 3.62
please can u ask as many people as you can ive known about this since the xda II days but never needed help and i know some1 can help this is a great website and forum thanks
Hi All,
Quick recap, I tried to install WM6 on a lower than 2.1 IPL/SPl so phone got stuck in boot screen, then i went to download an official WM5 rom from Tmobile, then I went into bootloader and successfully flash the official ROm. After flashing the official rom and multiple hard reset, phone is stuck on the bootscreen with the following info:
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.21
Am confused by the OS version isnt it meant to be 5.XXX because its a WM6.
Please.
Please anyone, I am pulling my hair out on this one...
Hello!
Try to use the following recovery method.
rmagyar said:
Hello!
Try to use the following recovery method.
Click to expand...
Click to collapse
Thanks for the reply I have downloaded the rescue kit and i have read the instruction, but the phone is not been connected in the bootloader mode even though i have the Xp usb driver connection. When I connect the usb cable after going into bootloader mode, the pc makes the usb connection sound but when when i run the Romupdate utility i get this error 260 connection error. What can I try again.
Thanks in advance.
I got this problem too.
I dont khnow wat to do, please help as.
rmagyar said:
Hello!
Try to use the following recovery method.
Click to expand...
Click to collapse
I have been able to successfully flash the phone again using the recovery kit but after flashing i took out the battery and powered up the phone, its still stuck at the boot screen with the same message.
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.21.
has it gone beyond the point of no return.?
Okay, am helpless here, Is anyone on here willing to fix this phone for me if I can post to them, and pay postage both ways?
did you find any solution?
Hallo!
I have exactly the same problem and I don't know what to do?
Do you guys have any news??
http://forum.xda-developers.com/showthread.php?t=406486&page=23
I need your help
My tytn is bricked
The Bootloader shows me HERM200 IPL-1.01 (White font, Red line)
HERM200 MFG SPL-1.01 (Yellow font) Redline)
I cant connect with my active sync anymore
The OS do not boot anymore
It shows my "no gsm"
It freezed by Windows Mobile Screen !
What can i do ?
Can anybody repair it ?
My english ist so bad, i come from Germany. SRY
I hope anybody can help me
Freeheld
press these buttons together: side ok button, power button and reset button,
then the HTC will go in USB mode and use some rom to flash it
thx for ur answer
when i try to flash it says me Error connecting
actice sync doesnt find my Tytn no conection
the tytn goes to the grey flash screen and interrupt it
can anybody tell my the right ROMs ?
i need a german roms and german radio rom
i have found my bricked Type
SPL HTC_BOOT Boot OS? No GSM? KITL
1.01MFG <=0107 No Yes ---
Diagnostic
bricked while flashing radio
Solution
Flash any type2 radio in NBF format, run RUU 2 times. If that doesn’t work, flash the radio using HERMflasher
i cant find "type2 radio roms in NBF format"
How i can see my HTC_BOOT ?
I crashed my tytn so hard
A new problem
Microsoft ActiveSync cannot recognize this device for one reason:
*The device was not connected properly.
.
.
.
And so one
How i can flash an new right ROM ?
You can flash from the SD-Card:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Here are the radio ROMs:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Thx but it doenst worked
i get an error
Loading...
than cant find file
but i renamed it write ???
how i can see that i have hardSPL
i dont beleave that i have it
and i cant install it because my activsync doenst work
If you're using XP - untick "Allow USB Connections" in activesync on pc. Put Hermes into bootloader and run the flash for Hard SPL V7. If this works then try an sd card flash for a different rom. No guarantees it will work but at this point, what have you got to loose?
Good Luck...
it doesnt work very well
i get an UPDATE ERROR
hmmmm
active sync is unticked (USB)
i have found a problem
i had flasched the bootloader 1.01MFG without SuperCID now i get Level= FF in mtty.exe, so i can flash back to 1.04 to install HARD SPL
How can i come back to 1.04 ?