So I unlocked my HTC Touch Pro around Feb 19 and I used an Engery Rom been awhile so I forgot wat rom. Then Engery rom started lagging so last night I dled another custom rom Neon Manila. I go to the Serial Screen (Hold Vol down + Power + Reset button) and I installed... Then when it boots it only goes to the Boot up screen and it doesnt install the custom rom. I tried this 5 times with different roms so yeah nothing so far. But the funny part is I dled a stock sprint rom from HTC site and it installed perfectly fine... Can anyone help me
Related
I installed the hard=spl-mgf than i installed dcd 2.2, i read that I should install the radio afterwards. when the dcd2.2 rom finished installing the device when to the htc smart mobility screen and has been stuck there ever since. Dont know what to do! can anyone please help!!
Put your phone into bootloader mode (Hold Power Button + Camera Button + push in Reset hole with stylus) and try to flash new radio version. That should get you past the boot screen after the radio flash.
thanks! Now installing the new radio? You guys are awesome!
Glad I could help
so i tried this and the phone still sits at 0%. i dont know what to do
EDIT:i have been trying to find the original VZW ROM but i cant find it anywhere
EDIT 2:i found the vzw rom, and i am about to test it..
damnit to hell. no luck
The screen says
TITA100
SPL-1.06.0000
CPLD-9
it seems you did not unlock your phone, load the unlocker and then flash the rom
i tried Titan Unlocker and that sat at 0% too
have u guys made sure u have the 2.4 oli-pro bootloader???
if So...then flash the new rom...then put the phone in bootloader mode and flash the new radio...do a hard reset and it should work fine...thats exactly what i did. mine was stuck on htc screen as well...but now it works.
if that doesnt work, you might have to go to stock rom...download from htc website...then do the whole procedure again...Bootloader...Rom...Radio...Hard Reset
Alright, so here is what's going on. I've flashed my phone a few times now and it's always been successful. I've also installed PointUI in the past on my Touch Pro, along with a few other apps most of which don't do anything significant(S2U2, advanced config, etc.).
Now the problem is, my hard key buttons will simply NOT respond. Only the power key, volume keys, and keyboard keys work. None of the front ones do. My other problem is that when I try to flash a new ROM now, it doesn't take. I've re-flashed my phone to the Sprint stock ROM and have since tried putting NRG's ROM onto it but whenever I flash his ROM and start my phone, it restarts on the HTC loading page(Before the red text shows up).
I've tried doing a hard reset, I've tried flashing back to the original ROM, I've tried all I can think of. Any help would be appreciated! Thanks!
Hello, I have an unrooted Hero from Orange (Spain) that enters in a boot loop. I have tryed everything to restore it but with no success. In the hboot menu it says "touch panel-fail" and even if I flash again the original rom from the hboot, it still gets in a boot loop.
First of all I will explain my case.
I had the Hero rooted, with custom roms etc, but when I bought a Nexus One, I gave my Hero to my brother. In September he told me that the official 2.1 had arrived to the Hero, so he wanted it instead of a custom rom, so I just proceeded to do so. I created a GoldCard, installed the 1.5 RUU of WWE, made the two OTAs and all OK. The last week (I think) he received a new small OTA, he updated successfully. My brother went to sleep with the Hero almost charged, but when he woke up, the Hero was off. Then, when he turned it on, and after a while (15mins or so) the Hero finally boot up, but the touchscreen wasn`t working and using it with the trackball the Hero was always prompting FC of android.process.acore (every 2 seconds more or less).
After watching that, I installed the official 1.5 of Orange hoping that it will fix it, but no way. Now it gets stuck in a loop while booting after the Orange bootscreen.
I tryed again to flash the WWE version, but with my old GoldCard doesn't seem to work (incorrect cid) and not being able to boot it up, I cannot create a new GoldCard or even root it.
I have tryed a lot of fastboot comands but I can do just little things because for the most useful things I need root.
Other thing that might be good to know is that when I plug the power to the Hero nothing happens, the led is not turning on, and I don't know how much battery I still have. Thank goodness that the battery was full before I moved the Hero to this infernal boot loop.
Please I will be so thankful if anyone can help me or just giving me any clue about how can I fix this.
I had the same problem on a refurbished hero I had. It had touchpanel fail in hboot and was in a constant loop.
I managed to get it to boot into android once by installing the ruu while in fastboot mode, however the touchscreen did not work and when I rebooted the phone it went back to the loop.
I sent the phone back for a replacement. If u check my previous threads ull see the thread icreated. In it I said that it had worked as that was when it finally booted but before I realised the sgreen didn't work
Sent from my HTC Hero using XDA App
Thank you for your reply, I will check your posts when I arrive home this evening.
hi.
I had the same problem and solve it by flashing this rom (goldcard needed)
http://shipped-roms.com/shipped/Her...io_63.18.55.06P_6.35.15.11_release_signed.exe
Hello!
It's insane, here is the description.
The android booted up just in safe mode.
The winmo had faults, so I've decided to change the whole system, with task 29.
At first I've changed my radio to the 2_12_50_02_2 version.
Than I've started the task29, the one what do not needs the radio.
Thats all I've done, and now I cannot reach the boot loader, or anything else.
The vol up and start trick is not working.
Please give me a solution, I need this phone working, I need a solution, and I appreciate every tip.
Thank You in advance!!!!
its volume down, not up.
same problem for me here
i did task29 and it was all fine, 100% reached and then the HD2 did a reboot, stopping at the black screen with the white HTC logo.
then as always i removed the battery and put it in again, holding vol down und clicking power-up once.
nothing happend... the phone vibrated once and got back to the HTC logo.
NO bootloader!
please do not tell me i'm too dumb to enter bootloader, i've been flashing custom roms for 6 months now!
my latest rom was Goatrip 6.0 and HSLP is 2.08
yesterday when goa6 was still "alive" the volume-down button worked fine, so the problem cant be some dust or dirt beneath the buttons.
edit: i've also tried flashing via SD card (clean FAT32 formatted 2gb card) the original stock rom 3.14 and a custom rom,
none of them is working either
every single hint of how i could solve this issue would be great!
hope to here from u guys
Remove the SD card and try again to go into BootLoader mode.
i have tried all methods and variations but i cant enter bootloader...
now i have found this thread:
--eeeeek cant post links --
its referring to the TP2 but i thought i would give it a try!
i've done this sketchy voldown+power+usbcable+batteryplugin thing but no result, even after 10 attempts :-(
Since you removed the battery, are all the pins straight?
those 5 (2 1 2) pins are in good shape
i cant post a link yet, ill send it to u via PM
posting links enabled:
http://forum.ppcgeeks.com/htc-touch-pro-2/122134-task29-didnt-complete-cant-enter-bootloader.html
i got it!
my stepfather owns a HD2, too.
i plug mine into his docking station while i was on the phone with htc support... just because i was bored waiting in the queue.
after the phone call i tried once again to enter bootloader e voila => boooom 3 colour screen!
i dont know whats the reason for, but i flashed my custom rom as fast as i could and it works fine.
but even now i cant enter bootloader properly...for 10 times trying 2 times actually work!
in the WM Os its no problem, Vol-Down functionality is 100%
cant explain that to me,
i think u need some luck to get this issue solved
___EDIT___
now with my customrom i could easily enter the bootloader via software command
and therefore i downgraded HSPL to stock spl1.42.000.
after this i flashed 2.08.hspl again and NOW my bootloader is working as intended!
u see, once u can get into bootloader again, all your problems can be fixed.
without him, you're f*cked
greetings
Hey, I had a great history with my evo 3d. and a history of fixing lol. So i have a new issue and i am wondering if there is an explanation.
Well, When i turn on my EVO , it goes to the splash screen, and then once i see the boot animation , it shuts down and reboot to splash screen and keep doing the same thing,
I have 1.49 hboot (downgraded from 1.53 using flashmaniac method) My phone has S-OFF
Things i tried.
Flash custom rom on 1.53
Flash stock RUU on 1.53
Flash More than one rom. on both 1.53 and 1.49
I have full access to the bootloader ,recovery, fastboot
I have also relocked my phone and unlocked it again.
i am sensing that it is a hardware issue.
Note: in the stock rom (stock ruu) the phone crashes right after the splash screen However in custom rom it goes to the boot animation, and goes like 1 sec in it and then crashes
So i would love to fix this phone
btw, there is also something wrong with this evo. which made me thing that it is bricked for over 8 months.
Now, way before that, before it stopped working, i bricked it while flashing a custom rom (it had s-off and when connected it shows qhsubs etc) so my phone stayed on the shelf for a year, then my friend broke his evo screen so i took the board and replaced it with mine and the phone worked, for like 6 or more months, Then one day 8 months ago my phone just stopped working. and won,t charge boot etc, tried different batteries and stuff, but nothing, and when connected to pc it shows nothing, not even a beeb sound (windows notification sound).
But yesterday i found out that the phone is NOT Bricked. what i did was , i removed the battery , connected it to the charger and as usual, nothing. Well i removed the cable and placed it back just for fun, then i saw a very very very very dim light (even more dim than the Bricked light) it turns on for a second. then goes off. i saw that and i freaked out because i tried everything and then suddenly it shows this, Now the phone did not work or anything, so i placed the battery and the led turned on and it was charging,. i went to the boot loader and everything was fine. but again i still can,t seem to boot any rom
Things i will try : Flash CM 11 rom