Related
tomtom is the only thing stopping me for to go to magneto
i tried it for a while its nice but i need my tomtom
if you know a way for using it ?
please no other soft sugestions because for the moment
my budget is to low for buying something new
TomTom 4.40 is working perfect under WM 5
TomTom3 + Magneto
Hi,
when i try to install TT4.4 the installer crashes!
What can i do about that?
best regards!
Re: TomTom3 + Magneto
Dodger said:
Hi,
when i try to install TT4.4 the installer crashes!
What can i do about that?
best regards!
Click to expand...
Click to collapse
I was also having the same trouble with the installer. Setup.exe kept on crashing. So I resorted to installing the program off the pda.
What you need to do is copy the following files to the pda:
wzd.cab
voice.cab
ttn.cab
gps.cab
Then run each one off the pda and the program should then be installed.
To install the maps just go through the setup to install it onto the storage card.
Oh and if you encounter the backlight problem whilst running Tomtom then you will need to press the "Red Disconnect Call Button" so it can be minimized, you will then need to go into the backlight settings and readjust them accordingly.
Good Luck!
when instal 4.40 i wont take my key
any suggestions ?
yeah, you could buy it instead.
any solution for backlight problem with tomtom 4.40 ?
Problem of backlight
Explore Cd Tomtom 4.40 to go in the folder voice then to take the files voice04.cab and voice05.cab (are the English voices UK) Initially to put it to Program Files for example then to launch the cab since to this folder (Program Files) in your pocket PC
Voice11 and Voices12 (are the french voices)
This procedure corrects the problem of backlight
what do you mean ?
if you install a voice the backlight problem is gone ?
In my case that corrected the problem
I had this problem of backlight
During installation of files wzd.cab ttn.cab gps.cab
and for my part after to have installed the file voice 11 and Voice 12 .cab (women and men french voices) the backlight error disappeared
That was the good solution in my case
The backlight is automatically returned and work good after voice.cab installation
So I suppose that the 4 cab files describes above must be all present so that tomtom 4.40 run correctly
But it's not the same problem for everyone
Dutch Voice Cab files
Hi everone,
Does anybody knows the numbers of the dutch voice.cabs.
:?:
Greeting from holland
Re: Dutch Voice Cab files
[email protected] said:
Hi everone,
Does anybody knows the numbers of the dutch voice.cabs.
:?:
Click to expand...
Click to collapse
can someone upload one ? or a download link :roll:
TomTom 4.4 filestructure
Hi,
First: thanks Nightspider and Dherrero for your tips!
it's hard working, but thanks to your tips TomTom 4.4 is beginning to work
on my XDAII.
I had to put the Benelux.CAB on the Storagecard. Only then it would install.
But I've ran into another problem, it says now "no maps found"
I suspect this have to do with the name and/or the place where you put
the directory with the maps. Can anyone who has a working TomTom 4.4
tell me the exact names of the directory, where the are and what files are in them?
TIA
Re: Dutch Voice Cab files
Hi Everyone,
When you want Dutch language you need to install the following cabs
voice14.cab = "Bram" a male voice
voice15.cab = "Eva" a female voice
voice16.cab = "Nora" i think (not tested)
Now the problem is where to put the Benelux map.
Greetings [email protected]
TomTom 4 Benelux map
I've found it!
Put the Beneluxmap in \Storage Card\.
During executing Beneluc.cab it was stored on
\Storage Card\My Documents\Benelux.
So you have to put the Benelux map in the root of Storage card!
TomTom 4 activation
Damn, now the bloody thing is asking for the activationcode.
Anyone?
TomTom 4 activation
Thanks for the solution.
I installed the map with a cardreader.
Works as wel
But i get the same activation problem
TomTom 4.40
Sorry,but 4.40 tom tom italian language with wm2005 blacklight doesn't work anyway
I have the same problem like Venom...
We need same help!!
TomTom 4.40
Same problem with the Dutch Language.
Pressing the hangup button and then go to the power settings to chance the backlight, solves the problem for the time being.
But i prefer a solution that works ever time.
Any can help us
The installer crash when it is going to copy the files and if i copy ttn.cab and i tap it the result is "Instalation of ttn.cab was unsuccessful. What can i do? thanks
magneto
I am using Mangeto....
Hi dherrero,
I had the same problem and downgraded to WM2003SED.
With WM2003SE it works perfect
I dont want to downgrade and tomtom 4.40 works well with magneto. What is happening??
I don't no.
Because i can't figured it out and i need TT i downgraded to WM2003SE.
When somebody knows that it wil work i upgrade again.
Maybe others can help you. :?:
Good Luck
You can copy the files out of the cab files and manually place them in the required directories, here a list of the files from the (ttn.cab) and where they go
Program Files\Navigator\data.chk
Program Files\Navigator\TomTom Navigator.exe
My Documents\TomTom\CurrentMap.dat
I use WinCe Cab Manager to extract the files
Hope this is of soem use!
Dogo
Thanks It works...
Activation Codes for Tomtom5 UK map
anyone have a code or work around for this??
How do you get tt5 to recongnise you have another map on the SD card???? anyone ????
It must be a map specific for tomtom5.0. Older maps doesnt work in tomtom5
Tomtom5 crashes continuesly..
And when Tomtom is installed and I want to sync my device in my cradle, device.exe en gwes.exe will crash also and need to softreset before sync will work again.
I deinstalled all tomtom components, and sync'n will work flawlessly... but after unpacking the cab files and start Tomtom Navigator.exe I'll get the same problem again..
In which order did you install the cabfiles?
edit: Older maps seem to work with tomtom5; all you need to do is edit the apn file in the old map folder and change the last number (map version) to the version of the tomtom5 you've got.
can't select voice, although i installed several voice cabs...
tom does not recocnize the voice file, but it is there (\tomtom\dataXX)
voice does work on wm2003
tomtom 5.0 crashes
Yes, tomtom 5.0 crashs sometimes. In my case, when i try to manage witch poi's categories to see in the map the sometimes it crash. I dont know if the problem is magneto or tomtom 5.0 but tomtom4.4 worked well. I hope tomtom releases a fix....
Bstard said:
can't select voice, although i installed several voice cabs...
tom does not recocnize the voice file, but it is there (\tomtom\dataXX)
voice does work on wm2003
Click to expand...
Click to collapse
hi, all
same problem as Bstard
@Bstard
have you solved ?
Regards.
tomtom 5 solved
i've heard that you can copy tomtom 3 poi.dat from old map to the new one, and although you don't get the new pois stability problems go away.
voice files cab install
dogo said:
You can copy the files out of the cab files and manually place them in the required directories, here a list of the files from the (ttn.cab) and where they go
Program Files\Navigator\data.chk
Program Files\Navigator\TomTom Navigator.exe
My Documents\TomTom\CurrentMap.dat
I use WinCe Cab Manager to extract the files
Hope this is of soem use!
Dogo [/quote
What about the voice fies? How to install?
Click to expand...
Click to collapse
Re: voice files cab install
What about the voice fies? How to install?
Working on this, but for the life of me i cant get TomTom to see any voice files
Dogo
Re: voice files cab install
dogo said:
What about the voice fies? How to install?
Working on this, but for the life of me i cant get TomTom to see any voice files
Dogo
Click to expand...
Click to collapse
Ok got mine working heres what i did!
I Copied data05.chk & engf.vif to My Device/My Documents/TomTom
All working fine now, I Had no luck with the ROM Version 1.50h.00WWE, TOMTOM Kept crashing, now using ROM Version 1.50g.00WWE
Now looking for a fix to the backlight keeps switching off
dogo
Voice solution for tt5
Just create the Voices folder in mydevice and copy the voice files here :lol: :lol:
ciao
TTN5 using older maps...
Krypt,
You say all you need to change is the pna file? I have some TTN2 USA Maps and have changed the .pna file to 562 and it still only finds my Great Britain TTN5 map.
Any advice?
Hi, Ive just installed TomTom 6.010 on WM6, but I can never get a GPS signal.
If I go to configure my GPS device in TOMTOM, which type of receiver do I select? The NMEA GPS? (I'm assuming this is COM5:9600, too)
Please help lol
Mines set up as:
Other NMEA GPS reciever
GPS Baud Rate 57600
Com 4
and Tomtom 6 works perfectly.
I had to use the tomtom 6 patch listed in an earlier post as my tomtom wouldn't work under Win Mobile 6, have you had to do the same.
It takes 5 to 10 minutes to find GPS signal some times (spesialy for the first time)
On some ROM versions it is immidiate. experiment...
My Com port is 0, but before i pair it with my HTC.
I use original Tom-Tom GPS
Optika said:
It takes 5 to 10 minutes to find GPS signal some times (spesialy for the first time)
On some ROM versions it is immidiate. experiment...
My Com port is 0, but before i pair it with my HTC.
I use original Tom-Tom GPS
Click to expand...
Click to collapse
Excuse me, but I'm a bit confused...what exactly are you pairing with the HTC? The GPS?
Why are you using external BT GPS instead of the internal one? is it due to low satellite reception?...cause I do this as well, since I have sun shields on my car, and the BT GPS is placed on the shield on a clear location where the reception is much better.
The internal is mapped to Port 4, but actually it is on Port 5.
cheers thanks. works great now
i havent had to update tomtom at all yet, but im not using a particularly kosher version *ahem* (although i do have a tomtom 6 lisence, just not for the maps im using)
If you run QUICK GPS BEFORE opening tomtom it finds the satellites pretty fast (at least for me). If I do not run it tomtom takes a long time to locate the satellites.
mcwtrekkie said:
Hi, Ive just installed TomTom 6.010 on WM6, but I can never get a GPS signal.
If I go to configure my GPS device in TOMTOM, which type of receiver do I select? The NMEA GPS? (I'm assuming this is COM5:9600, too)
Please help lol
Click to expand...
Click to collapse
you should be using the update 6.030 for TomTom 6 with devices with internal GPS
walshieau said:
you should be using the update 6.030 for TomTom 6 with devices with internal GPS
Click to expand...
Click to collapse
I agree - it is much more reliable like that.
walshieau said:
you should be using the update 6.030 for TomTom 6 with devices with internal GPS
Click to expand...
Click to collapse
?? well i have 6.0.10 and it works beside the fact that the menu is not visible (but clicking opens the settings box etc).
The main question i have:
How can i add an additional map manually? I have GB + major roads of WE. I have France maps. Just copying is not enough... so what else can i do?
doncsunny said:
?? well i have 6.0.10 and it works beside the fact that the menu is not visible (but clicking opens the settings box etc).
The main question i have:
How can i add an additional map manually? I have GB + major roads of WE. I have France maps. Just copying is not enough... so what else can i do?
Click to expand...
Click to collapse
You should only have to copy the map subdirectory (probably called France for this map) into the root of your SD card and Tomtom will be able to find it.
Location of TomTom 6.x patch for Windows Mobile 6?
A search of this forum does not seem to reveal the location of the latest TomTom Navigator 6.x patch that allows said software that I just purchased to run on my newly purchased x7501, which has the Windows Mobile 6 2.19 ROM code flashed.
What / where is the latest TomTom 6.x patch?
Is there a later, proven, "better" 2.x WM6 ROM available?
Alternately, what tools are used to develop the ROM flash code and application patches?
Thanks,
Tom
[email protected] said:
A search of this forum does not seem to reveal the location of the latest TomTom Navigator 6.x patch that allows said software that I just purchased to run on my newly purchased x7501, which has the Windows Mobile 6 2.19 ROM code flashed.
What / where is the latest TomTom 6.x patch?
Is there a later, proven, "better" 2.x WM6 ROM available?
Alternately, what tools are used to develop the ROM flash code and application patches?
Thanks,
Tom
Click to expand...
Click to collapse
If you're looking for tools there is a section within the forum for this and you can also check multiple Wiki pages.
TomTom 6.x works well on my Athena running WM6. Never had to install a patch to get it to work.
ltxda said:
If you're looking for tools there is a section within the forum for this and you can also check multiple Wiki pages.
TomTom 6.x works well on my Athena running WM6. Never had to install a patch to get it to work.
Click to expand...
Click to collapse
To add to that, I normally do not do any settings. I just install after every flash and start the program and leave device near my window and go off to have a coffee. After several minutes it sees the sats, and maps etc. That is it. The rest is automatic the next time I start and goes faster.
Alway s have the maps and voices folders installed (copied) to card.
apd said:
You should only have to copy the map subdirectory (probably called France for this map) into the root of your SD card and Tomtom will be able to find it.
Click to expand...
Click to collapse
if i don´t have sd card the tomtom 6.030 don´t works ??? i installed on microdrive but don´t find the maps ???? any idea??? thanks
Its cause your copy of TT6 (6030) isn't correctly hacked to allow the use of the maps you have.. Try another mod/hack
No success
I am having no success installing TomTom Navigator HOME 6.010 on my x7501, which has the 2.19 WM6 ROM flash.
I have unsuccessfully tried twiddling the user interface settings that seem as if they may affect the outcome.
When executed on a laptop running Vista, without WM5torage, the installation program does not recognize the x7501 as a valid installation location. Attempting installation while running WM5torage 1.75 causes a WM5torage hang and the x7501 needs a reset to connect to a laptop running Vista, and results in a "<file name> not found" error message after WM5torage ceases functioning. One file might get copied, most often none get copied successfully.
Installing from various locations and combinations with the ppc cab file results in a "Installation of <cab file> failed" message, to the system, microdrive and/or the 4GB microSDHC card.
Though new to the xda and mobile device space, I am reasonably experienced otherwise. As painful as this might be for both of us, please tell me, step by step, how you successfully installed TomTom Navigator HOME 6.010 onto your x7501. Please do not assume anything, as I have likely missed something simple. I would need to know the versions of software used, e.g. ROM, WM5torage, Navigator.
According to the TomTom web site, Navigator 6 on WM6 is not supported.
Thank you,
Tom
Someone has another version here. You need legal maps to use
http://forum.xda-developers.com/showthread.php?t=322243
[email protected] said:
I am having no success installing TomTom Navigator HOME 6.010 on my x7501, which has the 2.19 WM6 ROM flash.
I have unsuccessfully tried twiddling the user interface settings that seem as if they may affect the outcome.
When executed on a laptop running Vista, without WM5torage, the installation program does not recognize the x7501 as a valid installation location. Attempting installation while running WM5torage 1.75 causes a WM5torage hang and the x7501 needs a reset to connect to a laptop running Vista, and results in a "<file name> not found" error message after WM5torage ceases functioning. One file might get copied, most often none get copied successfully.
Installing from various locations and combinations with the ppc cab file results in a "Installation of <cab file> failed" message, to the system, microdrive and/or the 4GB microSDHC card.
Though new to the xda and mobile device space, I am reasonably experienced otherwise. As painful as this might be for both of us, please tell me, step by step, how you successfully installed TomTom Navigator HOME 6.010 onto your x7501. Please do not assume anything, as I have likely missed something simple. I would need to know the versions of software used, e.g. ROM, WM5torage, Navigator.
According to the TomTom web site, Navigator 6 on WM6 is not supported.
Thank you,
Tom
Click to expand...
Click to collapse
I had a similar problem installing the retail/downloaded copy of TomTom onto my device. I called TomTom support and they couldn't figure it out. I eventually figured out where the installation files were, extracted them and moved them over to my SD card. Then I installed them from there without any problem. I asked tech support to document the procedure I implemented to get this done in case they have other people with the same problem. Hope this helps. I'm slammed with work now or else I would look to see which files I used and post the info. I'm sure if you're familiar with installing CABs from the device you'll be able to tinker around a bit and find them. One thing I remember is that I had to extract the CAB on the CD or DVD before I was able to access the actual installation files. The first CAB is the archive and the CABs inside the archive are the installation files.
6.030 officially out-
Actually, Tomtom has officially released this update...
http://www.tomtom.com/support/product.php?ID=1401&Language=4&query=update&FID=6814
Basically, d/l the latest version of TT Home, insert your mem card or connect the device (mem card only 4 Vista), and click the D/L button on the above page.
Then follow the instructions. If it doesn't install, then you can manually pull the
cab file from:
(C:\Users\XXXX\Documents\TomTom\HOME\Downloads).
Then open with Winrar, and extract the ttn.cab file located in the 2577 folder.
Transfer to the card/device, run it, and you should be good to go.
Last note: Palm has an official update available on their site here:
http://www.palm.com/us/support/downloads/gps_nav.html
which appears to be the same exact file (same size).
Hope that helps...
hey guys i just want to copy the tomtom map to the microdrive via activesync but when trying to copy cline.dat i have an error what can i do to copy this file to the microdrive?
HI,
I use TomTom on my HTC Orbit2 with M-Amine Rom and need to load some Motorcycle Tracks for a planned Trip in the alps next week, but I don't know where to copy this *.idt routefiles? I start TomTom and klick on load route but it cannot find route files? TomTom is integrated in the M-Amine Image but where is this idt folder (storage card, My Device) to hold the routefiles? Can anyone help me?
Thx in advance
shred_man
Load files which should be .itn files and located on Device / Program Files / Navigator / ITN
Hello all,
I have found WORKING little app to save CABs from MarketPlace. You can download the app here:
http://blog.idlezone.org/post/2010/01/11/Windows-Mobile-MarketPlace-:-choose-where-to-install
(use fixed version posted in the comments of the article: http://blog.idlezone.org/public/DarkApps/DarkCABCatcherInstaller_quickfix.CAB)
Awsome, thanks for posting ! =d
Thank you So So So Much
Will
Works it also for paid apps?
doesnt work for me.
Awsome, How do you work this thing.
When I run DarkCABCatcher, I have set fom folder to \.\Application Data\Volatile to \.\My Documents.
The DarkCABCatcher application shows the following:
MKP5C5036.cab OK!
MKP5C5036.cab installed.
MKP5C5036.cab started.
MKP5C5036.cab copy Ok.
When I look in my \.\My Documents folder there is no .cab file collected.
Any ideas?
Thanks
Richard
Thanks !
I never used MarketPlace yet, but just in case, I'll keep that trick handy and try it.
I don't understand their position on "piracy", since I generally only use free software...
When it's not free, I buy the licenses, but since I'm flashing a lot these months, I really doubt MarketPlace would recognize my device next time I log on, so this trick may be unvaluable... Just to keep access to what I had legally bought.
Thanks for this, but unfortunately on cooked WM6.5 portuguese ROM it doesn't work. I confirmed that I have NetFW3.5 installed so I don't know what's wrong:
What a pity - don´t work at all on T-Mobile Vario V (HTC TouchPro2) with Windows Mobile 6.5.
Sometimes it write the cab is copied - but can´t find it in the destination folder.
Sometimes it just don´t show anything.
Yours
WeT-Klb
Cool app, didn't work
The critical thing this app shows is where the temporary CAB files are downloaded when installing from the Marketplace app.
Just open this folder in Windows Explorer while the phone is connected to your device. You have to turn on "view hidden and system folders" to see the folder on your phone.
Wait and watch the folder during the install. It will create a CAB file, which will get an icon as soon as the file is finished writing to the device. Quickly copy the file off the phone onto your computer.
(I have installed z-zip and associated CAB files with the program, which is why I get a nice icon as soon as the download has finished.)
http://forum.xda-developers.com/showthread.php?p=24513246#post24513246